?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspend
[linux/fpc-iii.git] / drivers / pcmcia / ti113x.h
blob539b5cd1a5986153974eaa23b98c22bb7aed6310
1 /*
2 * ti113x.h 1.16 1999/10/25 20:03:34
3 *
4 * The contents of this file are subject to the Mozilla Public License
5 * Version 1.1 (the "License"); you may not use this file except in
6 * compliance with the License. You may obtain a copy of the License
7 * at http://www.mozilla.org/MPL/
8 *
9 * Software distributed under the License is distributed on an "AS IS"
10 * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
11 * the License for the specific language governing rights and
12 * limitations under the License.
13 *
14 * The initial developer of the original code is David A. Hinds
15 * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
16 * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
17 *
18 * Alternatively, the contents of this file may be used under the
19 * terms of the GNU General Public License version 2 (the "GPL"), in which
20 * case the provisions of the GPL are applicable instead of the
21 * above. If you wish to allow the use of your version of this file
22 * only under the terms of the GPL and not to allow others to use
23 * your version of this file under the MPL, indicate your decision by
24 * deleting the provisions above and replace them with the notice and
25 * other provisions required by the GPL. If you do not delete the
26 * provisions above, a recipient may use your version of this file
27 * under either the MPL or the GPL.
28 */
29
30 #ifndef _LINUX_TI113X_H
31 #define _LINUX_TI113X_H
32
33 #include <linux/config.h>
34
35 /* Register definitions for TI 113X PCI-to-CardBus bridges */
36
37 /* System Control Register */
38 #define TI113X_SYSTEM_CONTROL 0x0080 /* 32 bit */
39 #define TI113X_SCR_SMIROUTE 0x04000000
40 #define TI113X_SCR_SMISTATUS 0x02000000
41 #define TI113X_SCR_SMIENB 0x01000000
42 #define TI113X_SCR_VCCPROT 0x00200000
43 #define TI113X_SCR_REDUCEZV 0x00100000
44 #define TI113X_SCR_CDREQEN 0x00080000
45 #define TI113X_SCR_CDMACHAN 0x00070000
46 #define TI113X_SCR_SOCACTIVE 0x00002000
47 #define TI113X_SCR_PWRSTREAM 0x00000800
48 #define TI113X_SCR_DELAYUP 0x00000400
49 #define TI113X_SCR_DELAYDOWN 0x00000200
50 #define TI113X_SCR_INTERROGATE 0x00000100
51 #define TI113X_SCR_CLKRUN_SEL 0x00000080
52 #define TI113X_SCR_PWRSAVINGS 0x00000040
53 #define TI113X_SCR_SUBSYSRW 0x00000020
54 #define TI113X_SCR_CB_DPAR 0x00000010
55 #define TI113X_SCR_CDMA_EN 0x00000008
56 #define TI113X_SCR_ASYNC_IRQ 0x00000004
57 #define TI113X_SCR_KEEPCLK 0x00000002
58 #define TI113X_SCR_CLKRUN_ENA 0x00000001
59
60 #define TI122X_SCR_SER_STEP 0xc0000000
61 #define TI122X_SCR_INTRTIE 0x20000000
62 #define TIXX21_SCR_TIEALL 0x10000000
63 #define TI122X_SCR_CBRSVD 0x00400000
64 #define TI122X_SCR_MRBURSTDN 0x00008000
65 #define TI122X_SCR_MRBURSTUP 0x00004000
66 #define TI122X_SCR_RIMUX 0x00000001
67
68 /* Multimedia Control Register */
69 #define TI1250_MULTIMEDIA_CTL 0x0084 /* 8 bit */
70 #define TI1250_MMC_ZVOUTEN 0x80
71 #define TI1250_MMC_PORTSEL 0x40
72 #define TI1250_MMC_ZVEN1 0x02
73 #define TI1250_MMC_ZVEN0 0x01
74
75 #define TI1250_GENERAL_STATUS 0x0085 /* 8 bit */
76 #define TI1250_GPIO0_CONTROL 0x0088 /* 8 bit */
77 #define TI1250_GPIO1_CONTROL 0x0089 /* 8 bit */
78 #define TI1250_GPIO2_CONTROL 0x008a /* 8 bit */
79 #define TI1250_GPIO3_CONTROL 0x008b /* 8 bit */
80 #define TI1250_GPIO_MODE_MASK 0xc0
81
82 /* IRQMUX/MFUNC Register */
83 #define TI122X_MFUNC 0x008c /* 32 bit */
84 #define TI122X_MFUNC0_MASK 0x0000000f
85 #define TI122X_MFUNC1_MASK 0x000000f0
86 #define TI122X_MFUNC2_MASK 0x00000f00
87 #define TI122X_MFUNC3_MASK 0x0000f000
88 #define TI122X_MFUNC4_MASK 0x000f0000
89 #define TI122X_MFUNC5_MASK 0x00f00000
90 #define TI122X_MFUNC6_MASK 0x0f000000
91
92 #define TI122X_MFUNC0_INTA 0x00000002
93 #define TI125X_MFUNC0_INTB 0x00000001
94 #define TI122X_MFUNC1_INTB 0x00000020
95 #define TI122X_MFUNC3_IRQSER 0x00001000
96
97
98 /* Retry Status Register */
99 #define TI113X_RETRY_STATUS 0x0090 /* 8 bit */
100 #define TI113X_RSR_PCIRETRY 0x80
101 #define TI113X_RSR_CBRETRY 0x40
102 #define TI113X_RSR_TEXP_CBB 0x20
103 #define TI113X_RSR_MEXP_CBB 0x10
104 #define TI113X_RSR_TEXP_CBA 0x08
105 #define TI113X_RSR_MEXP_CBA 0x04
106 #define TI113X_RSR_TEXP_PCI 0x02
107 #define TI113X_RSR_MEXP_PCI 0x01
108
109 /* Card Control Register */
110 #define TI113X_CARD_CONTROL 0x0091 /* 8 bit */
111 #define TI113X_CCR_RIENB 0x80
112 #define TI113X_CCR_ZVENABLE 0x40
113 #define TI113X_CCR_PCI_IRQ_ENA 0x20
114 #define TI113X_CCR_PCI_IREQ 0x10
115 #define TI113X_CCR_PCI_CSC 0x08
116 #define TI113X_CCR_SPKROUTEN 0x02
117 #define TI113X_CCR_IFG 0x01
118
119 #define TI1220_CCR_PORT_SEL 0x20
120 #define TI122X_CCR_AUD2MUX 0x04
121
122 /* Device Control Register */
123 #define TI113X_DEVICE_CONTROL 0x0092 /* 8 bit */
124 #define TI113X_DCR_5V_FORCE 0x40
125 #define TI113X_DCR_3V_FORCE 0x20
126 #define TI113X_DCR_IMODE_MASK 0x06
127 #define TI113X_DCR_IMODE_ISA 0x02
128 #define TI113X_DCR_IMODE_SERIAL 0x04
129
130 #define TI12XX_DCR_IMODE_PCI_ONLY 0x00
131 #define TI12XX_DCR_IMODE_ALL_SERIAL 0x06
132
133 /* Buffer Control Register */
134 #define TI113X_BUFFER_CONTROL 0x0093 /* 8 bit */
135 #define TI113X_BCR_CB_READ_DEPTH 0x08
136 #define TI113X_BCR_CB_WRITE_DEPTH 0x04
137 #define TI113X_BCR_PCI_READ_DEPTH 0x02
138 #define TI113X_BCR_PCI_WRITE_DEPTH 0x01
139
140 /* Diagnostic Register */
141 #define TI1250_DIAGNOSTIC 0x0093 /* 8 bit */
142 #define TI1250_DIAG_TRUE_VALUE 0x80
143 #define TI1250_DIAG_PCI_IREQ 0x40
144 #define TI1250_DIAG_PCI_CSC 0x20
145 #define TI1250_DIAG_ASYNC_CSC 0x01
146
147 /* DMA Registers */
148 #define TI113X_DMA_0 0x0094 /* 32 bit */
149 #define TI113X_DMA_1 0x0098 /* 32 bit */
150
151 /* ExCA IO offset registers */
152 #define TI113X_IO_OFFSET(map) (0x36+((map)<<1))
153
154 /* EnE test register */
155 #define ENE_TEST_C9 0xc9 /* 8bit */
156 #define ENE_TEST_C9_TLTENABLE 0x02
157 #define ENE_TEST_C9_PFENABLE_F0 0x04
158 #define ENE_TEST_C9_PFENABLE_F1 0x08
159 #define ENE_TEST_C9_PFENABLE (ENE_TEST_C9_PFENABLE_F0 | ENE_TEST_C9_PFENABLE_F0)
160 #define ENE_TEST_C9_WPDISALBLE_F0 0x40
161 #define ENE_TEST_C9_WPDISALBLE_F1 0x80
162 #define ENE_TEST_C9_WPDISALBLE (ENE_TEST_C9_WPDISALBLE_F0 | ENE_TEST_C9_WPDISALBLE_F1)
163
164 /*
165 * Texas Instruments CardBus controller overrides.
166 */
167 #define ti_sysctl(socket) ((socket)->private[0])
168 #define ti_cardctl(socket) ((socket)->private[1])
169 #define ti_devctl(socket) ((socket)->private[2])
170 #define ti_diag(socket) ((socket)->private[3])
171 #define ti_mfunc(socket) ((socket)->private[4])
172 #define ene_test_c9(socket) ((socket)->private[5])
173
174 /*
175 * These are the TI specific power management handlers.
176 */
177 static void ti_save_state(struct yenta_socket *socket)
178 {
179 ti_sysctl(socket) = config_readl(socket, TI113X_SYSTEM_CONTROL);
180 ti_mfunc(socket) = config_readl(socket, TI122X_MFUNC);
181 ti_cardctl(socket) = config_readb(socket, TI113X_CARD_CONTROL);
182 ti_devctl(socket) = config_readb(socket, TI113X_DEVICE_CONTROL);
183 ti_diag(socket) = config_readb(socket, TI1250_DIAGNOSTIC);
184
185 if (socket->dev->vendor == PCI_VENDOR_ID_ENE)
186 ene_test_c9(socket) = config_readb(socket, ENE_TEST_C9);
187 }
188
189 static void ti_restore_state(struct yenta_socket *socket)
190 {
191 config_writel(socket, TI113X_SYSTEM_CONTROL, ti_sysctl(socket));
192 config_writel(socket, TI122X_MFUNC, ti_mfunc(socket));
193 config_writeb(socket, TI113X_CARD_CONTROL, ti_cardctl(socket));
194 config_writeb(socket, TI113X_DEVICE_CONTROL, ti_devctl(socket));
195 config_writeb(socket, TI1250_DIAGNOSTIC, ti_diag(socket));
196
197 if (socket->dev->vendor == PCI_VENDOR_ID_ENE)
198 config_writeb(socket, ENE_TEST_C9, ene_test_c9(socket));
199 }
200
201 /*
202 * Zoom video control for TI122x/113x chips
203 */
204
205 static void ti_zoom_video(struct pcmcia_socket *sock, int onoff)
206 {
207 u8 reg;
208 struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
209
210 /* If we don't have a Zoom Video switch this is harmless,
211 we just tristate the unused (ZV) lines */
212 reg = config_readb(socket, TI113X_CARD_CONTROL);
213 if (onoff)
214 /* Zoom zoom, we will all go together, zoom zoom, zoom zoom */
215 reg |= TI113X_CCR_ZVENABLE;
216 else
217 reg &= ~TI113X_CCR_ZVENABLE;
218 config_writeb(socket, TI113X_CARD_CONTROL, reg);
219 }
220
221 /*
222 * The 145x series can also use this. They have an additional
223 * ZV autodetect mode we don't use but don't actually need.
224 * FIXME: manual says its in func0 and func1 but disagrees with
225 * itself about this - do we need to force func0, if so we need
226 * to know a lot more about socket pairings in pcmcia_socket than
227 * we do now.. uggh.
228 */
229
230 static void ti1250_zoom_video(struct pcmcia_socket *sock, int onoff)
231 {
232 struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
233 int shift = 0;
234 u8 reg;
235
236 ti_zoom_video(sock, onoff);
237
238 reg = config_readb(socket, TI1250_MULTIMEDIA_CTL);
239 reg |= TI1250_MMC_ZVOUTEN; /* ZV bus enable */
240
241 if(PCI_FUNC(socket->dev->devfn)==1)
242 shift = 1;
243
244 if(onoff)
245 {
246 reg &= ~(1<<6); /* Clear select bit */
247 reg |= shift<<6; /* Favour our socket */
248 reg |= 1<<shift; /* Socket zoom video on */
249 }
250 else
251 {
252 reg &= ~(1<<6); /* Clear select bit */
253 reg |= (1^shift)<<6; /* Favour other socket */
254 reg &= ~(1<<shift); /* Socket zoon video off */
255 }
256
257 config_writeb(socket, TI1250_MULTIMEDIA_CTL, reg);
258 }
259
260 static void ti_set_zv(struct yenta_socket *socket)
261 {
262 if(socket->dev->vendor == PCI_VENDOR_ID_TI)
263 {
264 switch(socket->dev->device)
265 {
266 /* There may be more .. */
267 case PCI_DEVICE_ID_TI_1220:
268 case PCI_DEVICE_ID_TI_1221:
269 case PCI_DEVICE_ID_TI_1225:
270 case PCI_DEVICE_ID_TI_4510:
271 socket->socket.zoom_video = ti_zoom_video;
272 break;
273 case PCI_DEVICE_ID_TI_1250:
274 case PCI_DEVICE_ID_TI_1251A:
275 case PCI_DEVICE_ID_TI_1251B:
276 case PCI_DEVICE_ID_TI_1450:
277 socket->socket.zoom_video = ti1250_zoom_video;
278 }
279 }
280 }
281
282
283 /*
284 * Generic TI init - TI has an extension for the
285 * INTCTL register that sets the PCI CSC interrupt.
286 * Make sure we set it correctly at open and init
287 * time
288 * - override: disable the PCI CSC interrupt. This makes
289 * it possible to use the CSC interrupt to probe the
290 * ISA interrupts.
291 * - init: set the interrupt to match our PCI state.
292 * This makes us correctly get PCI CSC interrupt
293 * events.
294 */
295 static int ti_init(struct yenta_socket *socket)
296 {
297 u8 new, reg = exca_readb(socket, I365_INTCTL);
298
299 new = reg & ~I365_INTR_ENA;
300 if (socket->cb_irq)
301 new |= I365_INTR_ENA;
302 if (new != reg)
303 exca_writeb(socket, I365_INTCTL, new);
304 return 0;
305 }
306
307 static int ti_override(struct yenta_socket *socket)
308 {
309 u8 new, reg = exca_readb(socket, I365_INTCTL);
310
311 new = reg & ~I365_INTR_ENA;
312 if (new != reg)
313 exca_writeb(socket, I365_INTCTL, new);
314
315 ti_set_zv(socket);
316
317 return 0;
318 }
319
320 static int ti113x_override(struct yenta_socket *socket)
321 {
322 u8 cardctl;
323
324 cardctl = config_readb(socket, TI113X_CARD_CONTROL);
325 cardctl &= ~(TI113X_CCR_PCI_IRQ_ENA | TI113X_CCR_PCI_IREQ | TI113X_CCR_PCI_CSC);
326 if (socket->cb_irq)
327 cardctl |= TI113X_CCR_PCI_IRQ_ENA | TI113X_CCR_PCI_CSC | TI113X_CCR_PCI_IREQ;
328 config_writeb(socket, TI113X_CARD_CONTROL, cardctl);
329
330 return ti_override(socket);
331 }
332
333
334 /* irqrouting for func0, probes PCI interrupt and ISA interrupts */
335 static void ti12xx_irqroute_func0(struct yenta_socket *socket)
336 {
337 u32 mfunc, mfunc_old, devctl;
338 u8 gpio3, gpio3_old;
339 int pci_irq_status;
340
341 mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
342 devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
343 printk(KERN_INFO "Yenta TI: socket %s, mfunc 0x%08x, devctl 0x%02x\n",
344 pci_name(socket->dev), mfunc, devctl);
345
346 /* make sure PCI interrupts are enabled before probing */
347 ti_init(socket);
348
349 /* test PCI interrupts first. only try fixing if return value is 0! */
350 pci_irq_status = yenta_probe_cb_irq(socket);
351 if (pci_irq_status)
352 goto out;
353
354 /*
355 * We're here which means PCI interrupts are _not_ delivered. try to
356 * find the right setting (all serial or parallel)
357 */
358 printk(KERN_INFO "Yenta TI: socket %s probing PCI interrupt failed, trying to fix\n",
359 pci_name(socket->dev));
360
361 /* for serial PCI make sure MFUNC3 is set to IRQSER */
362 if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
363 switch (socket->dev->device) {
364 case PCI_DEVICE_ID_TI_1250:
365 case PCI_DEVICE_ID_TI_1251A:
366 case PCI_DEVICE_ID_TI_1251B:
367 case PCI_DEVICE_ID_TI_1450:
368 case PCI_DEVICE_ID_TI_1451A:
369 case PCI_DEVICE_ID_TI_4450:
370 case PCI_DEVICE_ID_TI_4451:
371 /* these chips have no IRQSER setting in MFUNC3 */
372 break;
373
374 default:
375 mfunc = (mfunc & ~TI122X_MFUNC3_MASK) | TI122X_MFUNC3_IRQSER;
376
377 /* write down if changed, probe */
378 if (mfunc != mfunc_old) {
379 config_writel(socket, TI122X_MFUNC, mfunc);
380
381 pci_irq_status = yenta_probe_cb_irq(socket);
382 if (pci_irq_status == 1) {
383 printk(KERN_INFO "Yenta TI: socket %s all-serial interrupts ok\n",
384 pci_name(socket->dev));
385 mfunc_old = mfunc;
386 goto out;
387 }
388
389 /* not working, back to old value */
390 mfunc = mfunc_old;
391 config_writel(socket, TI122X_MFUNC, mfunc);
392
393 if (pci_irq_status == -1)
394 goto out;
395 }
396 }
397
398 /* serial PCI interrupts not working fall back to parallel */
399 printk(KERN_INFO "Yenta TI: socket %s falling back to parallel PCI interrupts\n",
400 pci_name(socket->dev));
401 devctl &= ~TI113X_DCR_IMODE_MASK;
402 devctl |= TI113X_DCR_IMODE_SERIAL; /* serial ISA could be right */
403 config_writeb(socket, TI113X_DEVICE_CONTROL, devctl);
404 }
405
406 /* parallel PCI interrupts: route INTA */
407 switch (socket->dev->device) {
408 case PCI_DEVICE_ID_TI_1250:
409 case PCI_DEVICE_ID_TI_1251A:
410 case PCI_DEVICE_ID_TI_1251B:
411 case PCI_DEVICE_ID_TI_1450:
412 /* make sure GPIO3 is set to INTA */
413 gpio3 = gpio3_old = config_readb(socket, TI1250_GPIO3_CONTROL);
414 gpio3 &= ~TI1250_GPIO_MODE_MASK;
415 if (gpio3 != gpio3_old)
416 config_writeb(socket, TI1250_GPIO3_CONTROL, gpio3);
417 break;
418
419 default:
420 gpio3 = gpio3_old = 0;
421
422 mfunc = (mfunc & ~TI122X_MFUNC0_MASK) | TI122X_MFUNC0_INTA;
423 if (mfunc != mfunc_old)
424 config_writel(socket, TI122X_MFUNC, mfunc);
425 }
426
427 /* time to probe again */
428 pci_irq_status = yenta_probe_cb_irq(socket);
429 if (pci_irq_status == 1) {
430 mfunc_old = mfunc;
431 printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts ok\n",
432 pci_name(socket->dev));
433 } else {
434 /* not working, back to old value */
435 mfunc = mfunc_old;
436 config_writel(socket, TI122X_MFUNC, mfunc);
437 if (gpio3 != gpio3_old)
438 config_writeb(socket, TI1250_GPIO3_CONTROL, gpio3_old);
439 }
440
441 out:
442 if (pci_irq_status < 1) {
443 socket->cb_irq = 0;
444 printk(KERN_INFO "Yenta TI: socket %s no PCI interrupts. Fish. Please report.\n",
445 pci_name(socket->dev));
446 }
447 }
448
449
450 /* changes the irq of func1 to match that of func0 */
451 static int ti12xx_align_irqs(struct yenta_socket *socket, int *old_irq)
452 {
453 struct pci_dev *func0;
454
455 /* find func0 device */
456 func0 = pci_get_slot(socket->dev->bus, socket->dev->devfn & ~0x07);
457 if (!func0)
458 return 0;
459
460 if (old_irq)
461 *old_irq = socket->cb_irq;
462 socket->cb_irq = socket->dev->irq = func0->irq;
463
464 pci_dev_put(func0);
465
466 return 1;
467 }
468
469 /*
470 * ties INTA and INTB together. also changes the devices irq to that of
471 * the function 0 device. call from func1 only.
472 * returns 1 if INTRTIE changed, 0 otherwise.
473 */
474 static int ti12xx_tie_interrupts(struct yenta_socket *socket, int *old_irq)
475 {
476 u32 sysctl;
477 int ret;
478
479 sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
480 if (sysctl & TI122X_SCR_INTRTIE)
481 return 0;
482
483 /* align */
484 ret = ti12xx_align_irqs(socket, old_irq);
485 if (!ret)
486 return 0;
487
488 /* tie */
489 sysctl |= TI122X_SCR_INTRTIE;
490 config_writel(socket, TI113X_SYSTEM_CONTROL, sysctl);
491
492 return 1;
493 }
494
495 /* undo what ti12xx_tie_interrupts() did */
496 static void ti12xx_untie_interrupts(struct yenta_socket *socket, int old_irq)
497 {
498 u32 sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
499 sysctl &= ~TI122X_SCR_INTRTIE;
500 config_writel(socket, TI113X_SYSTEM_CONTROL, sysctl);
501
502 socket->cb_irq = socket->dev->irq = old_irq;
503 }
504
505 /*
506 * irqrouting for func1, plays with INTB routing
507 * only touches MFUNC for INTB routing. all other bits are taken
508 * care of in func0 already.
509 */
510 static void ti12xx_irqroute_func1(struct yenta_socket *socket)
511 {
512 u32 mfunc, mfunc_old, devctl, sysctl;
513 int pci_irq_status;
514
515 mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
516 devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
517 printk(KERN_INFO "Yenta TI: socket %s, mfunc 0x%08x, devctl 0x%02x\n",
518 pci_name(socket->dev), mfunc, devctl);
519
520 /* if IRQs are configured as tied, align irq of func1 with func0 */
521 sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
522 if (sysctl & TI122X_SCR_INTRTIE)
523 ti12xx_align_irqs(socket, NULL);
524
525 /* make sure PCI interrupts are enabled before probing */
526 ti_init(socket);
527
528 /* test PCI interrupts first. only try fixing if return value is 0! */
529 pci_irq_status = yenta_probe_cb_irq(socket);
530 if (pci_irq_status)
531 goto out;
532
533 /*
534 * We're here which means PCI interrupts are _not_ delivered. try to
535 * find the right setting
536 */
537 printk(KERN_INFO "Yenta TI: socket %s probing PCI interrupt failed, trying to fix\n",
538 pci_name(socket->dev));
539
540
541 /* if all serial: set INTRTIE, probe again */
542 if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
543 int old_irq;
544
545 if (ti12xx_tie_interrupts(socket, &old_irq)) {
546 pci_irq_status = yenta_probe_cb_irq(socket);
547 if (pci_irq_status == 1) {
548 printk(KERN_INFO "Yenta TI: socket %s all-serial interrupts, tied ok\n",
549 pci_name(socket->dev));
550 goto out;
551 }
552
553 ti12xx_untie_interrupts(socket, old_irq);
554 }
555 }
556 /* parallel PCI: route INTB, probe again */
557 else {
558 int old_irq;
559
560 switch (socket->dev->device) {
561 case PCI_DEVICE_ID_TI_1250:
562 /* the 1250 has one pin for IRQSER/INTB depending on devctl */
563 break;
564
565 case PCI_DEVICE_ID_TI_1251A:
566 case PCI_DEVICE_ID_TI_1251B:
567 case PCI_DEVICE_ID_TI_1450:
568 /*
569 * those have a pin for IRQSER/INTB plus INTB in MFUNC0
570 * we alread probed the shared pin, now go for MFUNC0
571 */
572 mfunc = (mfunc & ~TI122X_MFUNC0_MASK) | TI125X_MFUNC0_INTB;
573 break;
574
575 default:
576 mfunc = (mfunc & ~TI122X_MFUNC1_MASK) | TI122X_MFUNC1_INTB;
577 break;
578 }
579
580 /* write, probe */
581 if (mfunc != mfunc_old) {
582 config_writel(socket, TI122X_MFUNC, mfunc);
583
584 pci_irq_status = yenta_probe_cb_irq(socket);
585 if (pci_irq_status == 1) {
586 printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts ok\n",
587 pci_name(socket->dev));
588 goto out;
589 }
590
591 mfunc = mfunc_old;
592 config_writel(socket, TI122X_MFUNC, mfunc);
593
594 if (pci_irq_status == -1)
595 goto out;
596 }
597
598 /* still nothing: set INTRTIE */
599 if (ti12xx_tie_interrupts(socket, &old_irq)) {
600 pci_irq_status = yenta_probe_cb_irq(socket);
601 if (pci_irq_status == 1) {
602 printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts, tied ok\n",
603 pci_name(socket->dev));
604 goto out;
605 }
606
607 ti12xx_untie_interrupts(socket, old_irq);
608 }
609 }
610
611 out:
612 if (pci_irq_status < 1) {
613 socket->cb_irq = 0;
614 printk(KERN_INFO "Yenta TI: socket %s no PCI interrupts. Fish. Please report.\n",
615 pci_name(socket->dev));
616 }
617 }
618
619
620 /* Returns true value if the second slot of a two-slot controller is empty */
621 static int ti12xx_2nd_slot_empty(struct yenta_socket *socket)
622 {
623 struct pci_dev *func;
624 struct yenta_socket *slot2;
625 int devfn;
626 unsigned int state;
627 int ret = 1;
628 u32 sysctl;
629
630 /* catch the two-slot controllers */
631 switch (socket->dev->device) {
632 case PCI_DEVICE_ID_TI_1220:
633 case PCI_DEVICE_ID_TI_1221:
634 case PCI_DEVICE_ID_TI_1225:
635 case PCI_DEVICE_ID_TI_1251A:
636 case PCI_DEVICE_ID_TI_1251B:
637 case PCI_DEVICE_ID_TI_1420:
638 case PCI_DEVICE_ID_TI_1450:
639 case PCI_DEVICE_ID_TI_1451A:
640 case PCI_DEVICE_ID_TI_1520:
641 case PCI_DEVICE_ID_TI_1620:
642 case PCI_DEVICE_ID_TI_4520:
643 case PCI_DEVICE_ID_TI_4450:
644 case PCI_DEVICE_ID_TI_4451:
645 /*
646 * there are way more, but they need to be added in yenta_socket.c
647 * and pci_ids.h first anyway.
648 */
649 break;
650
651 case PCI_DEVICE_ID_TI_X515:
652 case PCI_DEVICE_ID_TI_X420:
653 case PCI_DEVICE_ID_TI_X620:
654 case PCI_DEVICE_ID_TI_XX21_XX11:
655 case PCI_DEVICE_ID_TI_7410:
656 case PCI_DEVICE_ID_TI_7610:
657 /*
658 * those are either single or dual slot CB with additional functions
659 * like 1394, smartcard reader, etc. check the TIEALL flag for them
660 * the TIEALL flag binds the IRQ of all functions toghether.
661 * we catch the single slot variants later.
662 */
663 sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
664 if (sysctl & TIXX21_SCR_TIEALL)
665 return 0;
666
667 break;
668
669 /* single-slot controllers have the 2nd slot empty always :) */
670 default:
671 return 1;
672 }
673
674 /* get other slot */
675 devfn = socket->dev->devfn & ~0x07;
676 func = pci_get_slot(socket->dev->bus,
677 (socket->dev->devfn & 0x07) ? devfn : devfn | 0x01);
678 if (!func)
679 return 1;
680
681 /*
682 * check that the device id of both slots match. this is needed for the
683 * XX21 and the XX11 controller that share the same device id for single
684 * and dual slot controllers. return '2nd slot empty'. we already checked
685 * if the interrupt is tied to another function.
686 */
687 if (socket->dev->device != func->device)
688 goto out;
689
690 slot2 = pci_get_drvdata(func);
691 if (!slot2)
692 goto out;
693
694 /* check state */
695 yenta_get_status(&socket->socket, &state);
696 if (state & SS_DETECT) {
697 ret = 0;
698 goto out;
699 }
700
701 out:
702 pci_dev_put(func);
703 return ret;
704 }
705
706 /*
707 * TI specifiy parts for the power hook.
708 *
709 * some TI's with some CB's produces interrupt storm on power on. it has been
710 * seen with atheros wlan cards on TI1225 and TI1410. solution is simply to
711 * disable any CB interrupts during this time.
712 */
713 static int ti12xx_power_hook(struct pcmcia_socket *sock, int operation)
714 {
715 struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
716 u32 mfunc, devctl, sysctl;
717 u8 gpio3;
718
719 /* only POWER_PRE and POWER_POST are interesting */
720 if ((operation != HOOK_POWER_PRE) && (operation != HOOK_POWER_POST))
721 return 0;
722
723 devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
724 sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
725 mfunc = config_readl(socket, TI122X_MFUNC);
726
727 /*
728 * all serial/tied: only disable when modparm set. always doing it
729 * would mean a regression for working setups 'cos it disables the
730 * interrupts for both both slots on 2-slot controllers
731 * (and users of single slot controllers where it's save have to
732 * live with setting the modparm, most don't have to anyway)
733 */
734 if (((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) &&
735 (pwr_irqs_off || ti12xx_2nd_slot_empty(socket))) {
736 switch (socket->dev->device) {
737 case PCI_DEVICE_ID_TI_1250:
738 case PCI_DEVICE_ID_TI_1251A:
739 case PCI_DEVICE_ID_TI_1251B:
740 case PCI_DEVICE_ID_TI_1450:
741 case PCI_DEVICE_ID_TI_1451A:
742 case PCI_DEVICE_ID_TI_4450:
743 case PCI_DEVICE_ID_TI_4451:
744 /* these chips have no IRQSER setting in MFUNC3 */
745 break;
746
747 default:
748 if (operation == HOOK_POWER_PRE)
749 mfunc = (mfunc & ~TI122X_MFUNC3_MASK);
750 else
751 mfunc = (mfunc & ~TI122X_MFUNC3_MASK) | TI122X_MFUNC3_IRQSER;
752 }
753
754 return 0;
755 }
756
757 /* do the job differently for func0/1 */
758 if ((PCI_FUNC(socket->dev->devfn) == 0) ||
759 ((sysctl & TI122X_SCR_INTRTIE) &&
760 (pwr_irqs_off || ti12xx_2nd_slot_empty(socket)))) {
761 /* some bridges are different */
762 switch (socket->dev->device) {
763 case PCI_DEVICE_ID_TI_1250:
764 case PCI_DEVICE_ID_TI_1251A:
765 case PCI_DEVICE_ID_TI_1251B:
766 case PCI_DEVICE_ID_TI_1450:
767 /* those oldies use gpio3 for INTA */
768 gpio3 = config_readb(socket, TI1250_GPIO3_CONTROL);
769 if (operation == HOOK_POWER_PRE)
770 gpio3 = (gpio3 & ~TI1250_GPIO_MODE_MASK) | 0x40;
771 else
772 gpio3 &= ~TI1250_GPIO_MODE_MASK;
773 config_writeb(socket, TI1250_GPIO3_CONTROL, gpio3);
774 break;
775
776 default:
777 /* all new bridges are the same */
778 if (operation == HOOK_POWER_PRE)
779 mfunc &= ~TI122X_MFUNC0_MASK;
780 else
781 mfunc |= TI122X_MFUNC0_INTA;
782 config_writel(socket, TI122X_MFUNC, mfunc);
783 }
784 } else {
785 switch (socket->dev->device) {
786 case PCI_DEVICE_ID_TI_1251A:
787 case PCI_DEVICE_ID_TI_1251B:
788 case PCI_DEVICE_ID_TI_1450:
789 /* those have INTA elsewhere and INTB in MFUNC0 */
790 if (operation == HOOK_POWER_PRE)
791 mfunc &= ~TI122X_MFUNC0_MASK;
792 else
793 mfunc |= TI125X_MFUNC0_INTB;
794 config_writel(socket, TI122X_MFUNC, mfunc);
795
796 break;
797
798 default:
799 /* all new bridges are the same */
800 if (operation == HOOK_POWER_PRE)
801 mfunc &= ~TI122X_MFUNC1_MASK;
802 else
803 mfunc |= TI122X_MFUNC1_INTB;
804 config_writel(socket, TI122X_MFUNC, mfunc);
805 }
806 }
807
808 return 0;
809 }
810
811 static int ti12xx_override(struct yenta_socket *socket)
812 {
813 u32 val, val_orig;
814
815 /* make sure that memory burst is active */
816 val_orig = val = config_readl(socket, TI113X_SYSTEM_CONTROL);
817 if (disable_clkrun && PCI_FUNC(socket->dev->devfn) == 0) {
818 printk(KERN_INFO "Yenta: Disabling CLKRUN feature\n");
819 val |= TI113X_SCR_KEEPCLK;
820 }
821 if (!(val & TI122X_SCR_MRBURSTUP)) {
822 printk(KERN_INFO "Yenta: Enabling burst memory read transactions\n");
823 val |= TI122X_SCR_MRBURSTUP;
824 }
825 if (val_orig != val)
826 config_writel(socket, TI113X_SYSTEM_CONTROL, val);
827
828 /*
829 * Yenta expects controllers to use CSCINT to route
830 * CSC interrupts to PCI rather than INTVAL.
831 */
832 val = config_readb(socket, TI1250_DIAGNOSTIC);
833 printk(KERN_INFO "Yenta: Using %s to route CSC interrupts to PCI\n",
834 (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
835 printk(KERN_INFO "Yenta: Routing CardBus interrupts to %s\n",
836 (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
837
838 /* do irqrouting, depending on function */
839 if (PCI_FUNC(socket->dev->devfn) == 0)
840 ti12xx_irqroute_func0(socket);
841 else
842 ti12xx_irqroute_func1(socket);
843
844 /* install power hook */
845 socket->socket.power_hook = ti12xx_power_hook;
846
847 return ti_override(socket);
848 }
849
850
851 static int ti1250_override(struct yenta_socket *socket)
852 {
853 u8 old, diag;
854
855 old = config_readb(socket, TI1250_DIAGNOSTIC);
856 diag = old & ~(TI1250_DIAG_PCI_CSC | TI1250_DIAG_PCI_IREQ);
857 if (socket->cb_irq)
858 diag |= TI1250_DIAG_PCI_CSC | TI1250_DIAG_PCI_IREQ;
859
860 if (diag != old) {
861 printk(KERN_INFO "Yenta: adjusting diagnostic: %02x -> %02x\n",
862 old, diag);
863 config_writeb(socket, TI1250_DIAGNOSTIC, diag);
864 }
865
866 return ti12xx_override(socket);
867 }
868
869
870 /**
871 * EnE specific part. EnE bridges are register compatible with TI bridges but
872 * have their own test registers and more important their own little problems.
873 * Some fixup code to make everybody happy (TM).
874 */
875
876 #ifdef CONFIG_CARDBUS
877 /**
878 * set/clear various test bits:
879 * Defaults to clear the bit.
880 * - mask (u8) defines what bits to change
881 * - bits (u8) is the values to change them to
882 * -> it's
883 * current = (current & ~mask) | bits
884 */
885 /* pci ids of devices that wants to have the bit set */
886 #define DEVID(_vend,_dev,_subvend,_subdev,mask,bits) { \
887 .vendor = _vend, \
888 .device = _dev, \
889 .subvendor = _subvend, \
890 .subdevice = _subdev, \
891 .driver_data = ((mask) << 8 | (bits)), \
892 }
893 static struct pci_device_id ene_tune_tbl[] = {
894 /* Echo Audio products based on motorola DSP56301 and DSP56361 */
895 DEVID(PCI_VENDOR_ID_MOTOROLA, 0x1801, 0xECC0, PCI_ANY_ID,
896 ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE),
897 DEVID(PCI_VENDOR_ID_MOTOROLA, 0x3410, 0xECC0, PCI_ANY_ID,
898 ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE),
899
900 {}
901 };
902
903 static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus)
904 {
905 struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
906 struct pci_dev *dev;
907 struct pci_device_id *id = NULL;
908 u8 test_c9, old_c9, mask, bits;
909
910 list_for_each_entry(dev, &bus->devices, bus_list) {
911 id = (struct pci_device_id *) pci_match_id(ene_tune_tbl, dev);
912 if (id)
913 break;
914 }
915
916 test_c9 = old_c9 = config_readb(socket, ENE_TEST_C9);
917 if (id) {
918 mask = (id->driver_data >> 8) & 0xFF;
919 bits = id->driver_data & 0xFF;
920
921 test_c9 = (test_c9 & ~mask) | bits;
922 }
923 else
924 /* default to clear TLTEnable bit, old behaviour */
925 test_c9 &= ~ENE_TEST_C9_TLTENABLE;
926
927 printk(KERN_INFO "yenta EnE: chaning testregister 0xC9, %02x -> %02x\n", old_c9, test_c9);
928 config_writeb(socket, ENE_TEST_C9, test_c9);
929 }
930
931 static int ene_override(struct yenta_socket *socket)
932 {
933 /* install tune_bridge() function */
934 socket->socket.tune_bridge = ene_tune_bridge;
935
936 return ti1250_override(socket);
937 }
938 #else
939 # define ene_override ti1250_override
940 #endif
941
942 #endif /* _LINUX_TI113X_H */
943
Linux with added FPC-III support