arch/arm/mach-exynos/sleep.S

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   4  *              http://www.samsung.com
   5  *
   6  * Exynos low-level resume code
   7  */
   8
   9 #include <linux/linkage.h>
  10 #include <asm/asm-offsets.h>
  11 #include <asm/hardware/cache-l2x0.h>
  12 #include "smc.h"
  13
  14 #define CPU_MASK        0xff0ffff0
  15 #define CPU_CORTEX_A9   0x410fc090
  16
  17         .text
  18         .align
  19
  20         /*
  21          * sleep magic, to allow the bootloader to check for an valid
  22          * image to resume to. Must be the first word before the
  23          * exynos_cpu_resume entry.
  24          */
  25
  26         .word   0x2bedf00d
  27
  28         /*
  29          * exynos_cpu_resume
  30          *
  31          * resume code entry for bootloader to call
  32          */
  33
  34 ENTRY(exynos_cpu_resume)
  35 #ifdef CONFIG_CACHE_L2X0
  36         mrc     p15, 0, r0, c0, c0, 0
  37         ldr     r1, =CPU_MASK
  38         and     r0, r0, r1
  39         ldr     r1, =CPU_CORTEX_A9
  40         cmp     r0, r1
  41         bleq    l2c310_early_resume
  42 #endif
  43         b       cpu_resume
  44 ENDPROC(exynos_cpu_resume)
  45
  46         .align
  47         .arch armv7-a
  48         .arch_extension sec
  49 ENTRY(exynos_cpu_resume_ns)
  50         mrc     p15, 0, r0, c0, c0, 0
  51         ldr     r1, =CPU_MASK
  52         and     r0, r0, r1
  53         ldr     r1, =CPU_CORTEX_A9
  54         cmp     r0, r1
  55         bne     skip_cp15
  56
  57         adr     r0, _cp15_save_power
  58         ldr     r1, [r0]
  59         ldr     r1, [r0, r1]
  60         adr     r0, _cp15_save_diag
  61         ldr     r2, [r0]
  62         ldr     r2, [r0, r2]
  63         mov     r0, #SMC_CMD_C15RESUME
  64         dsb
  65         smc     #0
  66 #ifdef CONFIG_CACHE_L2X0
  67         adr     r0, 1f
  68         ldr     r2, [r0]
  69         add     r0, r2, r0
  70
  71         /* Check that the address has been initialised. */
  72         ldr     r1, [r0, #L2X0_R_PHY_BASE]
  73         teq     r1, #0
  74         beq     skip_l2x0
  75
  76         /* Check if controller has been enabled. */
  77         ldr     r2, [r1, #L2X0_CTRL]
  78         tst     r2, #0x1
  79         bne     skip_l2x0
  80
  81         ldr     r1, [r0, #L2X0_R_TAG_LATENCY]
  82         ldr     r2, [r0, #L2X0_R_DATA_LATENCY]
  83         ldr     r3, [r0, #L2X0_R_PREFETCH_CTRL]
  84         mov     r0, #SMC_CMD_L2X0SETUP1
  85         smc     #0
  86
  87         /* Reload saved regs pointer because smc corrupts registers. */
  88         adr     r0, 1f
  89         ldr     r2, [r0]
  90         add     r0, r2, r0
  91
  92         ldr     r1, [r0, #L2X0_R_PWR_CTRL]
  93         ldr     r2, [r0, #L2X0_R_AUX_CTRL]
  94         mov     r0, #SMC_CMD_L2X0SETUP2
  95         smc     #0
  96
  97         mov     r0, #SMC_CMD_L2X0INVALL
  98         smc     #0
  99
 100         mov     r1, #1
 101         mov     r0, #SMC_CMD_L2X0CTRL
 102         smc     #0
 103 skip_l2x0:
 104 #endif /* CONFIG_CACHE_L2X0 */
 105 skip_cp15:
 106         b       cpu_resume
 107 ENDPROC(exynos_cpu_resume_ns)
 108
 109         .align
 110 _cp15_save_power:
 111         .long   cp15_save_power - .
 112 _cp15_save_diag:
 113         .long   cp15_save_diag - .
 114 #ifdef CONFIG_CACHE_L2X0
 115 1:      .long   l2x0_saved_regs - .
 116 #endif /* CONFIG_CACHE_L2X0 */
 117
 118         .data
 119         .align  2
 120         .globl cp15_save_diag
 121 cp15_save_diag:
 122         .long   0       @ cp15 diagnostic
 123         .globl cp15_save_power
 124 cp15_save_power:
 125         .long   0       @ cp15 power control