arch/arm/mach-omap2/clock.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  *  linux/arch/arm/mach-omap2/clock.c
   4  *
   5  *  Copyright (C) 2005-2008 Texas Instruments, Inc.
   6  *  Copyright (C) 2004-2010 Nokia Corporation
   7  *
   8  *  Contacts:
   9  *  Richard Woodruff <r-woodruff2@ti.com>
  10  *  Paul Walmsley
  11  */
  12 #undef DEBUG
  13
  14 #include <linux/kernel.h>
  15 #include <linux/export.h>
  16 #include <linux/list.h>
  17 #include <linux/errno.h>
  18 #include <linux/err.h>
  19 #include <linux/delay.h>
  20 #include <linux/clk.h>
  21 #include <linux/clk-provider.h>
  22 #include <linux/io.h>
  23 #include <linux/bitops.h>
  24 #include <linux/of_address.h>
  25 #include <asm/cpu.h>
  26
  27 #include <trace/events/power.h>
  28
  29 #include "soc.h"
  30 #include "clockdomain.h"
  31 #include "clock.h"
  32 #include "cm.h"
  33 #include "cm2xxx.h"
  34 #include "cm3xxx.h"
  35 #include "cm-regbits-24xx.h"
  36 #include "cm-regbits-34xx.h"
  37 #include "common.h"
  38
  39 u16 cpu_mask;
  40
  41 /* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
  42 #define OMAP3430_DPLL_FINT_BAND1_MIN    750000
  43 #define OMAP3430_DPLL_FINT_BAND1_MAX    2100000
  44 #define OMAP3430_DPLL_FINT_BAND2_MIN    7500000
  45 #define OMAP3430_DPLL_FINT_BAND2_MAX    21000000
  46
  47 /*
  48  * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
  49  * From device data manual section 4.3 "DPLL and DLL Specifications".
  50  */
  51 #define OMAP3PLUS_DPLL_FINT_MIN         32000
  52 #define OMAP3PLUS_DPLL_FINT_MAX         52000000
  53
  54 struct ti_clk_ll_ops omap_clk_ll_ops = {
  55         .clkdm_clk_enable = clkdm_clk_enable,
  56         .clkdm_clk_disable = clkdm_clk_disable,
  57         .clkdm_lookup = clkdm_lookup,
  58         .cm_wait_module_ready = omap_cm_wait_module_ready,
  59         .cm_split_idlest_reg = cm_split_idlest_reg,
  60 };
  61
  62 /**
  63  * omap2_clk_setup_ll_ops - setup clock driver low-level ops
  64  *
  65  * Sets up clock driver low-level platform ops. These are needed
  66  * for register accesses and various other misc platform operations.
  67  * Returns 0 on success, -EBUSY if low level ops have been registered
  68  * already.
  69  */
  70 int __init omap2_clk_setup_ll_ops(void)
  71 {
  72         return ti_clk_setup_ll_ops(&omap_clk_ll_ops);
  73 }
  74
  75 /*
  76  * OMAP2+ specific clock functions
  77  */
  78
  79 /**
  80  * ti_clk_init_features - init clock features struct for the SoC
  81  *
  82  * Initializes the clock features struct based on the SoC type.
  83  */
  84 void __init ti_clk_init_features(void)
  85 {
  86         struct ti_clk_features features = { 0 };
  87         /* Fint setup for DPLLs */
  88         if (cpu_is_omap3430()) {
  89                 features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
  90                 features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
  91                 features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
  92                 features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
  93         } else {
  94                 features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
  95                 features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
  96         }
  97
  98         /* Bypass value setup for DPLLs */
  99         if (cpu_is_omap24xx()) {
 100                 features.dpll_bypass_vals |=
 101                         (1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
 102                         (1 << OMAP2XXX_EN_DPLL_FRBYPASS);
 103         } else if (cpu_is_omap34xx()) {
 104                 features.dpll_bypass_vals |=
 105                         (1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
 106                         (1 << OMAP3XXX_EN_DPLL_FRBYPASS);
 107         } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() ||
 108                    soc_is_omap54xx() || soc_is_dra7xx()) {
 109                 features.dpll_bypass_vals |=
 110                         (1 << OMAP4XXX_EN_DPLL_LPBYPASS) |
 111                         (1 << OMAP4XXX_EN_DPLL_FRBYPASS) |
 112                         (1 << OMAP4XXX_EN_DPLL_MNBYPASS);
 113         }
 114
 115         /* Jitter correction only available on OMAP343X */
 116         if (cpu_is_omap343x())
 117                 features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
 118
 119         if (omap_type() == OMAP2_DEVICE_TYPE_GP)
 120                 features.flags |= TI_CLK_DEVICE_TYPE_GP;
 121
 122         /* Idlest value for interface clocks.
 123          * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
 124          * 34xx reverses this, just to keep us on our toes
 125          * AM35xx uses both, depending on the module.
 126          */
 127         if (cpu_is_omap24xx())
 128                 features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
 129         else if (cpu_is_omap34xx())
 130                 features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
 131
 132         /* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
 133         if (omap_rev() == OMAP3430_REV_ES1_0)
 134                 features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
 135
 136         /* Errata I810 for omap5 / dra7 */
 137         if (soc_is_omap54xx() || soc_is_dra7xx())
 138                 features.flags |= TI_CLK_ERRATA_I810;
 139
 140         ti_clk_setup_features(&features);
 141 }