arm64: dts: Revert "specify console via command line"
[linux/fpc-iii.git] / arch / arm / mach-omap2 / omap4-common.c
blob5c3845730dbf547d8c34040d069bab4b51006be5
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * OMAP4 specific common source file.
5 * Copyright (C) 2010 Texas Instruments, Inc.
6 * Author:
7 * Santosh Shilimkar <santosh.shilimkar@ti.com>
8 */
10 #include <linux/kernel.h>
11 #include <linux/init.h>
12 #include <linux/io.h>
13 #include <linux/irq.h>
14 #include <linux/irqchip.h>
15 #include <linux/platform_device.h>
16 #include <linux/memblock.h>
17 #include <linux/of_irq.h>
18 #include <linux/of_platform.h>
19 #include <linux/export.h>
20 #include <linux/irqchip/arm-gic.h>
21 #include <linux/of_address.h>
22 #include <linux/reboot.h>
23 #include <linux/genalloc.h>
25 #include <asm/hardware/cache-l2x0.h>
26 #include <asm/mach/map.h>
27 #include <asm/memblock.h>
28 #include <asm/smp_twd.h>
30 #include "omap-wakeupgen.h"
31 #include "soc.h"
32 #include "iomap.h"
33 #include "common.h"
34 #include "prminst44xx.h"
35 #include "prcm_mpu44xx.h"
36 #include "omap4-sar-layout.h"
37 #include "omap-secure.h"
38 #include "sram.h"
40 #ifdef CONFIG_CACHE_L2X0
41 static void __iomem *l2cache_base;
42 #endif
44 static void __iomem *sar_ram_base;
45 static void __iomem *gic_dist_base_addr;
46 static void __iomem *twd_base;
48 #define IRQ_LOCALTIMER 29
50 #ifdef CONFIG_OMAP_INTERCONNECT_BARRIER
52 /* Used to implement memory barrier on DRAM path */
53 #define OMAP4_DRAM_BARRIER_VA 0xfe600000
55 static void __iomem *dram_sync, *sram_sync;
56 static phys_addr_t dram_sync_paddr;
57 static u32 dram_sync_size;
60 * The OMAP4 bus structure contains asynchronous bridges which can buffer
61 * data writes from the MPU. These asynchronous bridges can be found on
62 * paths between the MPU to EMIF, and the MPU to L3 interconnects.
64 * We need to be careful about re-ordering which can happen as a result
65 * of different accesses being performed via different paths, and
66 * therefore different asynchronous bridges.
70 * OMAP4 interconnect barrier which is called for each mb() and wmb().
71 * This is to ensure that normal paths to DRAM (normal memory, cacheable
72 * accesses) are properly synchronised with writes to DMA coherent memory
73 * (normal memory, uncacheable) and device writes.
75 * The mb() and wmb() barriers only operate only on the MPU->MA->EMIF
76 * path, as we need to ensure that data is visible to other system
77 * masters prior to writes to those system masters being seen.
79 * Note: the SRAM path is not synchronised via mb() and wmb().
81 static void omap4_mb(void)
83 if (dram_sync)
84 writel_relaxed(0, dram_sync);
88 * OMAP4 Errata i688 - asynchronous bridge corruption when entering WFI.
90 * If a data is stalled inside asynchronous bridge because of back
91 * pressure, it may be accepted multiple times, creating pointer
92 * misalignment that will corrupt next transfers on that data path until
93 * next reset of the system. No recovery procedure once the issue is hit,
94 * the path remains consistently broken.
96 * Async bridges can be found on paths between MPU to EMIF and MPU to L3
97 * interconnects.
99 * This situation can happen only when the idle is initiated by a Master
100 * Request Disconnection (which is trigged by software when executing WFI
101 * on the CPU).
103 * The work-around for this errata needs all the initiators connected
104 * through an async bridge to ensure that data path is properly drained
105 * before issuing WFI. This condition will be met if one Strongly ordered
106 * access is performed to the target right before executing the WFI.
108 * In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
109 * IO barrier ensure that there is no synchronisation loss on initiators
110 * operating on both interconnect port simultaneously.
112 * This is a stronger version of the OMAP4 memory barrier below, and
113 * operates on both the MPU->MA->EMIF path but also the MPU->OCP path
114 * as well, and is necessary prior to executing a WFI.
116 void omap_interconnect_sync(void)
118 if (dram_sync && sram_sync) {
119 writel_relaxed(readl_relaxed(dram_sync), dram_sync);
120 writel_relaxed(readl_relaxed(sram_sync), sram_sync);
121 isb();
125 static int __init omap4_sram_init(void)
127 struct device_node *np;
128 struct gen_pool *sram_pool;
130 if (!soc_is_omap44xx() && !soc_is_omap54xx())
131 return 0;
133 np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
134 if (!np)
135 pr_warn("%s:Unable to allocate sram needed to handle errata I688\n",
136 __func__);
137 sram_pool = of_gen_pool_get(np, "sram", 0);
138 if (!sram_pool)
139 pr_warn("%s:Unable to get sram pool needed to handle errata I688\n",
140 __func__);
141 else
142 sram_sync = (void *)gen_pool_alloc(sram_pool, PAGE_SIZE);
144 return 0;
146 omap_arch_initcall(omap4_sram_init);
148 /* Steal one page physical memory for barrier implementation */
149 void __init omap_barrier_reserve_memblock(void)
151 dram_sync_size = ALIGN(PAGE_SIZE, SZ_1M);
152 dram_sync_paddr = arm_memblock_steal(dram_sync_size, SZ_1M);
155 void __init omap_barriers_init(void)
157 struct map_desc dram_io_desc[1];
159 dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
160 dram_io_desc[0].pfn = __phys_to_pfn(dram_sync_paddr);
161 dram_io_desc[0].length = dram_sync_size;
162 dram_io_desc[0].type = MT_MEMORY_RW_SO;
163 iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc));
164 dram_sync = (void __iomem *) dram_io_desc[0].virtual;
166 pr_info("OMAP4: Map %pa to %p for dram barrier\n",
167 &dram_sync_paddr, dram_sync);
169 soc_mb = omap4_mb;
172 #endif
174 void gic_dist_disable(void)
176 if (gic_dist_base_addr)
177 writel_relaxed(0x0, gic_dist_base_addr + GIC_DIST_CTRL);
180 void gic_dist_enable(void)
182 if (gic_dist_base_addr)
183 writel_relaxed(0x1, gic_dist_base_addr + GIC_DIST_CTRL);
186 bool gic_dist_disabled(void)
188 return !(readl_relaxed(gic_dist_base_addr + GIC_DIST_CTRL) & 0x1);
191 void gic_timer_retrigger(void)
193 u32 twd_int = readl_relaxed(twd_base + TWD_TIMER_INTSTAT);
194 u32 gic_int = readl_relaxed(gic_dist_base_addr + GIC_DIST_PENDING_SET);
195 u32 twd_ctrl = readl_relaxed(twd_base + TWD_TIMER_CONTROL);
197 if (twd_int && !(gic_int & BIT(IRQ_LOCALTIMER))) {
199 * The local timer interrupt got lost while the distributor was
200 * disabled. Ack the pending interrupt, and retrigger it.
202 pr_warn("%s: lost localtimer interrupt\n", __func__);
203 writel_relaxed(1, twd_base + TWD_TIMER_INTSTAT);
204 if (!(twd_ctrl & TWD_TIMER_CONTROL_PERIODIC)) {
205 writel_relaxed(1, twd_base + TWD_TIMER_COUNTER);
206 twd_ctrl |= TWD_TIMER_CONTROL_ENABLE;
207 writel_relaxed(twd_ctrl, twd_base + TWD_TIMER_CONTROL);
212 #ifdef CONFIG_CACHE_L2X0
214 void __iomem *omap4_get_l2cache_base(void)
216 return l2cache_base;
219 void omap4_l2c310_write_sec(unsigned long val, unsigned reg)
221 unsigned smc_op;
223 switch (reg) {
224 case L2X0_CTRL:
225 smc_op = OMAP4_MON_L2X0_CTRL_INDEX;
226 break;
228 case L2X0_AUX_CTRL:
229 smc_op = OMAP4_MON_L2X0_AUXCTRL_INDEX;
230 break;
232 case L2X0_DEBUG_CTRL:
233 smc_op = OMAP4_MON_L2X0_DBG_CTRL_INDEX;
234 break;
236 case L310_PREFETCH_CTRL:
237 smc_op = OMAP4_MON_L2X0_PREFETCH_INDEX;
238 break;
240 case L310_POWER_CTRL:
241 pr_info_once("OMAP L2C310: ROM does not support power control setting\n");
242 return;
244 default:
245 WARN_ONCE(1, "OMAP L2C310: ignoring write to reg 0x%x\n", reg);
246 return;
249 omap_smc1(smc_op, val);
252 int __init omap_l2_cache_init(void)
254 /* Static mapping, never released */
255 l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K);
256 if (WARN_ON(!l2cache_base))
257 return -ENOMEM;
258 return 0;
260 #endif
262 void __iomem *omap4_get_sar_ram_base(void)
264 return sar_ram_base;
268 * SAR RAM used to save and restore the HW context in low power modes.
269 * Note that we need to initialize this very early for kexec. See
270 * omap4_mpuss_early_init().
272 void __init omap4_sar_ram_init(void)
274 unsigned long sar_base;
277 * To avoid code running on other OMAPs in
278 * multi-omap builds
280 if (cpu_is_omap44xx())
281 sar_base = OMAP44XX_SAR_RAM_BASE;
282 else if (soc_is_omap54xx())
283 sar_base = OMAP54XX_SAR_RAM_BASE;
284 else
285 return;
287 /* Static mapping, never released */
288 sar_ram_base = ioremap(sar_base, SZ_16K);
289 if (WARN_ON(!sar_ram_base))
290 return;
293 static const struct of_device_id intc_match[] = {
294 { .compatible = "ti,omap4-wugen-mpu", },
295 { .compatible = "ti,omap5-wugen-mpu", },
296 { },
299 static struct device_node *intc_node;
301 void __init omap_gic_of_init(void)
303 struct device_node *np;
305 intc_node = of_find_matching_node(NULL, intc_match);
306 if (WARN_ON(!intc_node)) {
307 pr_err("No WUGEN found in DT, system will misbehave.\n");
308 pr_err("UPDATE YOUR DEVICE TREE!\n");
311 /* Extract GIC distributor and TWD bases for OMAP4460 ROM Errata WA */
312 if (!cpu_is_omap446x())
313 goto skip_errata_init;
315 np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
316 gic_dist_base_addr = of_iomap(np, 0);
317 WARN_ON(!gic_dist_base_addr);
319 np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
320 twd_base = of_iomap(np, 0);
321 WARN_ON(!twd_base);
323 skip_errata_init:
324 irqchip_init();