arm64: dts: Revert "specify console via command line"
[linux/fpc-iii.git] / arch / arm / mach-omap2 / sdrc.h
blob5bdb832665c0cc21a356359fdc5115626045331b
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 #ifndef __ARCH_ARM_MACH_OMAP2_SDRC_H
3 #define __ARCH_ARM_MACH_OMAP2_SDRC_H
5 /*
6 * OMAP2/3 SDRC/SMS macros and prototypes
8 * Copyright (C) 2007-2008, 2012 Texas Instruments, Inc.
9 * Copyright (C) 2007-2008 Nokia Corporation
11 * Paul Walmsley
12 * Tony Lindgren
13 * Richard Woodruff
15 #undef DEBUG
17 #ifndef __ASSEMBLER__
19 #include <linux/io.h>
21 extern void __iomem *omap2_sdrc_base;
22 extern void __iomem *omap2_sms_base;
24 #define OMAP_SDRC_REGADDR(reg) (omap2_sdrc_base + (reg))
25 #define OMAP_SMS_REGADDR(reg) (omap2_sms_base + (reg))
27 /* SDRC global register get/set */
29 static inline void sdrc_write_reg(u32 val, u16 reg)
31 writel_relaxed(val, OMAP_SDRC_REGADDR(reg));
34 static inline u32 sdrc_read_reg(u16 reg)
36 return readl_relaxed(OMAP_SDRC_REGADDR(reg));
39 /* SMS global register get/set */
41 static inline void sms_write_reg(u32 val, u16 reg)
43 writel_relaxed(val, OMAP_SMS_REGADDR(reg));
46 static inline u32 sms_read_reg(u16 reg)
48 return readl_relaxed(OMAP_SMS_REGADDR(reg));
51 extern void omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms);
54 /**
55 * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
56 * @rate: SDRC clock rate (in Hz)
57 * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
58 * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
59 * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
60 * @mr: Value to program to SDRC_MR for this rate
62 * This structure holds a pre-computed set of register values for the
63 * SDRC for a given SDRC clock rate and SDRAM chip. These are
64 * intended to be pre-computed and specified in an array in the board-*.c
65 * files. The structure is keyed off the 'rate' field.
67 struct omap_sdrc_params {
68 unsigned long rate;
69 u32 actim_ctrla;
70 u32 actim_ctrlb;
71 u32 rfr_ctrl;
72 u32 mr;
75 #ifdef CONFIG_SOC_HAS_OMAP2_SDRC
76 void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
77 struct omap_sdrc_params *sdrc_cs1);
78 #else
79 static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
80 struct omap_sdrc_params *sdrc_cs1) {};
81 #endif
83 int omap2_sdrc_get_params(unsigned long r,
84 struct omap_sdrc_params **sdrc_cs0,
85 struct omap_sdrc_params **sdrc_cs1);
86 void omap2_sms_save_context(void);
87 void omap2_sms_restore_context(void);
89 struct memory_timings {
90 u32 m_type; /* ddr = 1, sdr = 0 */
91 u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
92 u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
93 u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
94 u32 base_cs; /* base chip select to use for calculations */
97 extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
98 struct omap_sdrc_params *rx51_get_sdram_timings(void);
100 u32 omap2xxx_sdrc_dll_is_unlocked(void);
101 u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
104 #else
105 #define OMAP242X_SDRC_REGADDR(reg) \
106 OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
107 #define OMAP243X_SDRC_REGADDR(reg) \
108 OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
109 #define OMAP34XX_SDRC_REGADDR(reg) \
110 OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
112 #endif /* __ASSEMBLER__ */
114 /* Minimum frequency that the SDRC DLL can lock at */
115 #define MIN_SDRC_DLL_LOCK_FREQ 83000000
117 /* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
118 #define SDRC_MPURATE_SCALE 8
120 /* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
121 #define SDRC_MPURATE_BASE_SHIFT 9
124 * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
125 * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
127 #define SDRC_MPURATE_LOOPS 96
129 /* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
131 #define SDRC_SYSCONFIG 0x010
132 #define SDRC_CS_CFG 0x040
133 #define SDRC_SHARING 0x044
134 #define SDRC_ERR_TYPE 0x04C
135 #define SDRC_DLLA_CTRL 0x060
136 #define SDRC_DLLA_STATUS 0x064
137 #define SDRC_DLLB_CTRL 0x068
138 #define SDRC_DLLB_STATUS 0x06C
139 #define SDRC_POWER 0x070
140 #define SDRC_MCFG_0 0x080
141 #define SDRC_MR_0 0x084
142 #define SDRC_EMR2_0 0x08c
143 #define SDRC_ACTIM_CTRL_A_0 0x09c
144 #define SDRC_ACTIM_CTRL_B_0 0x0a0
145 #define SDRC_RFR_CTRL_0 0x0a4
146 #define SDRC_MANUAL_0 0x0a8
147 #define SDRC_MCFG_1 0x0B0
148 #define SDRC_MR_1 0x0B4
149 #define SDRC_EMR2_1 0x0BC
150 #define SDRC_ACTIM_CTRL_A_1 0x0C4
151 #define SDRC_ACTIM_CTRL_B_1 0x0C8
152 #define SDRC_RFR_CTRL_1 0x0D4
153 #define SDRC_MANUAL_1 0x0D8
155 #define SDRC_POWER_AUTOCOUNT_SHIFT 8
156 #define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
157 #define SDRC_POWER_CLKCTRL_SHIFT 4
158 #define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT)
159 #define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT)
162 * These values represent the number of memory clock cycles between
163 * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192
164 * rows per device, and include a subtraction of a 50 cycle window in the
165 * event that the autorefresh command is delayed due to other SDRC activity.
166 * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
167 * counter reaches 0.
169 * These represent optimal values for common parts, it won't work for all.
170 * As long as you scale down, most parameters are still work, they just
171 * become sub-optimal. The RFR value goes in the opposite direction. If you
172 * don't adjust it down as your clock period increases the refresh interval
173 * will not be met. Setting all parameters for complete worst case may work,
174 * but may cut memory performance by 2x. Due to errata the DLLs need to be
175 * unlocked and their value needs run time calibration. A dynamic call is
176 * need for that as no single right value exists across production samples.
178 * Only the FULL speed values are given. Current code is such that rate
179 * changes must be made at DPLLoutx2. The actual value adjustment for low
180 * frequency operation will be handled by omap_set_performance()
182 * By having the boot loader boot up in the fastest L4 speed available likely
183 * will result in something which you can switch between.
185 #define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1)
186 #define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
187 #define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
188 #define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
189 #define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
193 * SMS register access
196 #define OMAP242X_SMS_REGADDR(reg) \
197 (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
198 #define OMAP243X_SMS_REGADDR(reg) \
199 (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
200 #define OMAP343X_SMS_REGADDR(reg) \
201 (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
203 /* SMS register offsets - read/write with sms_{read,write}_reg() */
205 #define SMS_SYSCONFIG 0x010
206 /* REVISIT: fill in other SMS registers here */
210 #endif