arm64: dts: Revert "specify console via command line"
[linux/fpc-iii.git] / arch / arm / mach-s3c64xx / irq-pm.c
blob31b221190479eebeeacaedf81abb5ad1aa5096bc
1 // SPDX-License-Identifier: GPL-2.0
2 //
3 // Copyright 2008 Openmoko, Inc.
4 // Copyright 2008 Simtec Electronics
5 // Ben Dooks <ben@simtec.co.uk>
6 // http://armlinux.simtec.co.uk/
7 //
8 // S3C64XX - Interrupt handling Power Management
11 * NOTE: Code in this file is not used when booting with Device Tree support.
14 #include <linux/kernel.h>
15 #include <linux/syscore_ops.h>
16 #include <linux/interrupt.h>
17 #include <linux/serial_core.h>
18 #include <linux/serial_s3c.h>
19 #include <linux/irq.h>
20 #include <linux/io.h>
21 #include <linux/of.h>
23 #include <mach/map.h>
25 #include <mach/regs-gpio.h>
26 #include <plat/cpu.h>
27 #include <plat/pm.h>
29 /* We handled all the IRQ types in this code, to save having to make several
30 * small files to handle each different type separately. Having the EINT_GRP
31 * code here shouldn't be as much bloat as the IRQ table space needed when
32 * they are enabled. The added benefit is we ensure that these registers are
33 * in the same state as we suspended.
36 static struct sleep_save irq_save[] = {
37 SAVE_ITEM(S3C64XX_PRIORITY),
38 SAVE_ITEM(S3C64XX_EINT0CON0),
39 SAVE_ITEM(S3C64XX_EINT0CON1),
40 SAVE_ITEM(S3C64XX_EINT0FLTCON0),
41 SAVE_ITEM(S3C64XX_EINT0FLTCON1),
42 SAVE_ITEM(S3C64XX_EINT0FLTCON2),
43 SAVE_ITEM(S3C64XX_EINT0FLTCON3),
44 SAVE_ITEM(S3C64XX_EINT0MASK),
47 static struct irq_grp_save {
48 u32 fltcon;
49 u32 con;
50 u32 mask;
51 } eint_grp_save[5];
53 #ifndef CONFIG_SERIAL_SAMSUNG_UARTS
54 #define SERIAL_SAMSUNG_UARTS 0
55 #else
56 #define SERIAL_SAMSUNG_UARTS CONFIG_SERIAL_SAMSUNG_UARTS
57 #endif
59 static u32 irq_uart_mask[SERIAL_SAMSUNG_UARTS];
61 static int s3c64xx_irq_pm_suspend(void)
63 struct irq_grp_save *grp = eint_grp_save;
64 int i;
66 S3C_PMDBG("%s: suspending IRQs\n", __func__);
68 s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
70 for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++)
71 irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
73 for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
74 grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
75 grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
76 grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
79 return 0;
82 static void s3c64xx_irq_pm_resume(void)
84 struct irq_grp_save *grp = eint_grp_save;
85 int i;
87 S3C_PMDBG("%s: resuming IRQs\n", __func__);
89 s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
91 for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++)
92 __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
94 for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
95 __raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
96 __raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
97 __raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
100 S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
103 static struct syscore_ops s3c64xx_irq_syscore_ops = {
104 .suspend = s3c64xx_irq_pm_suspend,
105 .resume = s3c64xx_irq_pm_resume,
108 static __init int s3c64xx_syscore_init(void)
110 /* Appropriate drivers (pinctrl, uart) handle this when using DT. */
111 if (of_have_populated_dt() || !soc_is_s3c64xx())
112 return 0;
114 register_syscore_ops(&s3c64xx_irq_syscore_ops);
116 return 0;
119 core_initcall(s3c64xx_syscore_init);