arch/arm64/boot/dts/apm/apm-mustang.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * dts file for AppliedMicro (APM) Mustang Board
   4  *
   5  * Copyright (C) 2013, Applied Micro Circuits Corporation
   6  */
   7
   8 /dts-v1/;
   9
  10 /include/ "apm-storm.dtsi"
  11
  12 / {
  13         model = "APM X-Gene Mustang board";
  14         compatible = "apm,mustang", "apm,xgene-storm";
  15
  16         chosen { };
  17
  18         memory {
  19                 device_type = "memory";
  20                 reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
  21         };
  22
  23         gpio-keys {
  24                 compatible = "gpio-keys";
  25                 button@1 {
  26                         label = "POWER";
  27                         linux,code = <116>;
  28                         linux,input-type = <0x1>;
  29                         interrupt-parent = <&sbgpio>;
  30                         interrupts = <0x5 0x1>;
  31                 };
  32         };
  33
  34         poweroff_mbox: poweroff_mbox@10548000 {
  35                 compatible = "syscon";
  36                 reg = <0x0 0x10548000 0x0 0x30>;
  37         };
  38
  39         poweroff: poweroff@10548010 {
  40                 compatible = "syscon-poweroff";
  41                 regmap = <&poweroff_mbox>;
  42                 offset = <0x10>;
  43                 mask = <0x1>;
  44         };
  45 };
  46
  47 &pcie0clk {
  48         status = "ok";
  49 };
  50
  51 &pcie0 {
  52         status = "ok";
  53 };
  54
  55 &serial0 {
  56         status = "ok";
  57 };
  58
  59 &menet {
  60         status = "ok";
  61 };
  62
  63 &sgenet0 {
  64         status = "ok";
  65 };
  66
  67 &sgenet1 {
  68         status = "ok";
  69 };
  70
  71 &xgenet {
  72         status = "ok";
  73         rxlos-gpios = <&sbgpio 12 1>;
  74 };
  75
  76 &mmc0 {
  77         status = "ok";
  78 };
  79
  80 &mdio {
  81         menet0phy: phy@3 {
  82                 reg = <0x3>;
  83         };
  84         sgenet0phy: phy@4 {
  85                 reg = <0x4>;
  86         };
  87         sgenet1phy: phy@5 {
  88                 reg = <0x5>;
  89         };
  90 };