arch/arm64/boot/dts/bitmain/bm1880.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2019 Linaro Ltd.
   4  * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
   5  */
   6
   7 #include <dt-bindings/clock/bm1880-clock.h>
   8 #include <dt-bindings/interrupt-controller/arm-gic.h>
   9 #include <dt-bindings/reset/bitmain,bm1880-reset.h>
  10
  11 / {
  12         compatible = "bitmain,bm1880";
  13         interrupt-parent = <&gic>;
  14         #address-cells = <2>;
  15         #size-cells = <2>;
  16
  17         cpus {
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20
  21                 cpu0: cpu@0 {
  22                         device_type = "cpu";
  23                         compatible = "arm,cortex-a53";
  24                         reg = <0x0>;
  25                         enable-method = "psci";
  26                 };
  27
  28                 cpu1: cpu@1 {
  29                         device_type = "cpu";
  30                         compatible = "arm,cortex-a53";
  31                         reg = <0x1>;
  32                         enable-method = "psci";
  33                 };
  34         };
  35
  36         reserved-memory {
  37                 #address-cells = <2>;
  38                 #size-cells = <2>;
  39                 ranges;
  40
  41                 secmon@100000000 {
  42                         reg = <0x1 0x00000000 0x0 0x20000>;
  43                         no-map;
  44                 };
  45
  46                 jpu@130000000 {
  47                         reg = <0x1 0x30000000 0x0 0x08000000>; // 128M
  48                         no-map;
  49                 };
  50
  51                 vpu@138000000 {
  52                         reg = <0x1 0x38000000 0x0 0x08000000>; // 128M
  53                         no-map;
  54                 };
  55         };
  56
  57         psci {
  58                 compatible = "arm,psci-0.2";
  59                 method = "smc";
  60         };
  61
  62         timer {
  63                 compatible = "arm,armv8-timer";
  64                 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
  65                              <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
  66                              <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
  67                              <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
  68         };
  69
  70         osc: osc {
  71                 compatible = "fixed-clock";
  72                 clock-frequency = <25000000>;
  73                 #clock-cells = <0>;
  74         };
  75
  76         soc {
  77                 compatible = "simple-bus";
  78                 #address-cells = <2>;
  79                 #size-cells = <2>;
  80                 ranges;
  81
  82                 gic: interrupt-controller@50001000 {
  83                         compatible = "arm,gic-400";
  84                         reg = <0x0 0x50001000 0x0 0x1000>,
  85                               <0x0 0x50002000 0x0 0x2000>;
  86                         interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
  87                         interrupt-controller;
  88                         #interrupt-cells = <3>;
  89                 };
  90
  91                 sctrl: system-controller@50010000 {
  92                         compatible = "bitmain,bm1880-sctrl", "syscon",
  93                                      "simple-mfd";
  94                         reg = <0x0 0x50010000 0x0 0x1000>;
  95                         #address-cells = <1>;
  96                         #size-cells = <1>;
  97                         ranges = <0x0 0x0 0x50010000 0x1000>;
  98
  99                         pinctrl: pinctrl@400 {
 100                                 compatible = "bitmain,bm1880-pinctrl";
 101                                 reg = <0x400 0x120>;
 102                         };
 103
 104                         clk: clock-controller@e8 {
 105                                 compatible = "bitmain,bm1880-clk";
 106                                 reg = <0xe8 0x0c>, <0x800 0xb0>;
 107                                 reg-names = "pll", "sys";
 108                                 clocks = <&osc>;
 109                                 clock-names = "osc";
 110                                 #clock-cells = <1>;
 111                         };
 112
 113                         rst: reset-controller@c00 {
 114                                 compatible = "bitmain,bm1880-reset";
 115                                 reg = <0xc00 0x8>;
 116                                 #reset-cells = <1>;
 117                         };
 118                 };
 119
 120                 gpio0: gpio@50027000 {
 121                         #address-cells = <1>;
 122                         #size-cells = <0>;
 123                         compatible = "snps,dw-apb-gpio";
 124                         reg = <0x0 0x50027000 0x0 0x400>;
 125
 126                         porta: gpio-controller@0 {
 127                                 compatible = "snps,dw-apb-gpio-port";
 128                                 gpio-controller;
 129                                 #gpio-cells = <2>;
 130                                 snps,nr-gpios = <32>;
 131                                 reg = <0>;
 132                                 interrupt-controller;
 133                                 #interrupt-cells = <2>;
 134                                 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 135                         };
 136                 };
 137
 138                 gpio1: gpio@50027400 {
 139                         #address-cells = <1>;
 140                         #size-cells = <0>;
 141                         compatible = "snps,dw-apb-gpio";
 142                         reg = <0x0 0x50027400 0x0 0x400>;
 143
 144                         portb: gpio-controller@0 {
 145                                 compatible = "snps,dw-apb-gpio-port";
 146                                 gpio-controller;
 147                                 #gpio-cells = <2>;
 148                                 snps,nr-gpios = <32>;
 149                                 reg = <0>;
 150                                 interrupt-controller;
 151                                 #interrupt-cells = <2>;
 152                                 interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 153                         };
 154                 };
 155
 156                 gpio2: gpio@50027800 {
 157                         #address-cells = <1>;
 158                         #size-cells = <0>;
 159                         compatible = "snps,dw-apb-gpio";
 160                         reg = <0x0 0x50027800 0x0 0x400>;
 161
 162                         portc: gpio-controller@0 {
 163                                 compatible = "snps,dw-apb-gpio-port";
 164                                 gpio-controller;
 165                                 #gpio-cells = <2>;
 166                                 snps,nr-gpios = <8>;
 167                                 reg = <0>;
 168                                 interrupt-controller;
 169                                 #interrupt-cells = <2>;
 170                                 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 171                         };
 172                 };
 173
 174                 uart0: serial@58018000 {
 175                         compatible = "snps,dw-apb-uart";
 176                         reg = <0x0 0x58018000 0x0 0x2000>;
 177                         clocks = <&clk BM1880_CLK_UART_500M>,
 178                                  <&clk BM1880_CLK_APB_UART>;
 179                         clock-names = "baudclk", "apb_pclk";
 180                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 181                         reg-shift = <2>;
 182                         reg-io-width = <4>;
 183                         resets = <&rst BM1880_RST_UART0_1_CLK>;
 184                         status = "disabled";
 185                 };
 186
 187                 uart1: serial@5801A000 {
 188                         compatible = "snps,dw-apb-uart";
 189                         reg = <0x0 0x5801a000 0x0 0x2000>;
 190                         clocks = <&clk BM1880_CLK_UART_500M>,
 191                                  <&clk BM1880_CLK_APB_UART>;
 192                         clock-names = "baudclk", "apb_pclk";
 193                         interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 194                         reg-shift = <2>;
 195                         reg-io-width = <4>;
 196                         resets = <&rst BM1880_RST_UART0_1_ACLK>;
 197                         status = "disabled";
 198                 };
 199
 200                 uart2: serial@5801C000 {
 201                         compatible = "snps,dw-apb-uart";
 202                         reg = <0x0 0x5801c000 0x0 0x2000>;
 203                         clocks = <&clk BM1880_CLK_UART_500M>,
 204                                  <&clk BM1880_CLK_APB_UART>;
 205                         clock-names = "baudclk", "apb_pclk";
 206                         interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 207                         reg-shift = <2>;
 208                         reg-io-width = <4>;
 209                         resets = <&rst BM1880_RST_UART2_3_CLK>;
 210                         status = "disabled";
 211                 };
 212
 213                 uart3: serial@5801E000 {
 214                         compatible = "snps,dw-apb-uart";
 215                         reg = <0x0 0x5801e000 0x0 0x2000>;
 216                         clocks = <&clk BM1880_CLK_UART_500M>,
 217                                  <&clk BM1880_CLK_APB_UART>;
 218                         clock-names = "baudclk", "apb_pclk";
 219                         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 220                         reg-shift = <2>;
 221                         reg-io-width = <4>;
 222                         resets = <&rst BM1880_RST_UART2_3_ACLK>;
 223                         status = "disabled";
 224                 };
 225         };
 226 };