arm64: dts: Revert "specify console via command line"
[linux/fpc-iii.git] / arch / arm64 / boot / dts / broadcom / stingray / stingray-clock.dtsi
blob10a106aca22983cbd9dec61c1f809b11633fac82
1 /*
2  *  BSD LICENSE
3  *
4  *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
5  *
6  *  Redistribution and use in source and binary forms, with or without
7  *  modification, are permitted provided that the following conditions
8  *  are met:
9  *
10  *    * Redistributions of source code must retain the above copyright
11  *      notice, this list of conditions and the following disclaimer.
12  *    * Redistributions in binary form must reproduce the above copyright
13  *      notice, this list of conditions and the following disclaimer in
14  *      the documentation and/or other materials provided with the
15  *      distribution.
16  *    * Neither the name of Broadcom nor the names of its
17  *      contributors may be used to endorse or promote products derived
18  *      from this software without specific prior written permission.
19  *
20  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21  *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22  *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23  *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24  *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25  *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26  *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27  *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28  *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30  *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31  */
33 #include <dt-bindings/clock/bcm-sr.h>
35                 osc: oscillator {
36                         #clock-cells = <0>;
37                         compatible = "fixed-clock";
38                         clock-frequency = <50000000>;
39                 };
41                 crmu_ref25m: crmu_ref25m {
42                         #clock-cells = <0>;
43                         compatible = "fixed-factor-clock";
44                         clocks = <&osc>;
45                         clock-div = <2>;
46                         clock-mult = <1>;
47                 };
49                 genpll0: genpll0@1d104 {
50                         #clock-cells = <1>;
51                         compatible = "brcm,sr-genpll0";
52                         reg = <0x0001d104 0x32>,
53                               <0x0001c854 0x4>;
54                         clocks = <&osc>;
55                         clock-output-names = "genpll0", "clk_125m", "clk_scr",
56                                              "clk_250", "clk_pcie_axi",
57                                              "clk_paxc_axi_x2",
58                                              "clk_paxc_axi";
59                 };
61                 genpll2: genpll2@1d1ac {
62                         #clock-cells = <1>;
63                         compatible = "brcm,sr-genpll2";
64                         reg = <0x0001d1ac 0x32>,
65                               <0x0001c854 0x4>;
66                         clocks = <&osc>;
67                         clock-output-names = "genpll2", "clk_nic",
68                                              "clk_ts_500_ref", "clk_125_nitro",
69                                              "clk_chimp", "clk_nic_flash",
70                                              "clk_fs";
71                 };
73                 genpll3: genpll3@1d1e0 {
74                         #clock-cells = <1>;
75                         compatible = "brcm,sr-genpll3";
76                         reg = <0x0001d1e0 0x32>,
77                               <0x0001c854 0x4>;
78                         clocks = <&osc>;
79                         clock-output-names = "genpll3", "clk_hsls",
80                                              "clk_sdio";
81                 };
83                 genpll4: genpll4@1d214 {
84                         #clock-cells = <1>;
85                         compatible = "brcm,sr-genpll4";
86                         reg = <0x0001d214 0x32>,
87                               <0x0001c854 0x4>;
88                         clocks = <&osc>;
89                         clock-output-names = "genpll4", "clk_ccn",
90                                              "clk_tpiu_pll", "clk_noc",
91                                              "clk_chclk_fs4",
92                                              "clk_bridge_fscpu";
93                 };
95                 genpll5: genpll5@1d248 {
96                         #clock-cells = <1>;
97                         compatible = "brcm,sr-genpll5";
98                         reg = <0x0001d248 0x32>,
99                               <0x0001c870 0x4>;
100                         clocks = <&osc>;
101                         clock-output-names = "genpll5", "clk_fs4_hf",
102                                              "clk_crypto_ae", "clk_raid_ae";
103                 };
105                 lcpll0: lcpll0@1d0c4 {
106                         #clock-cells = <1>;
107                         compatible = "brcm,sr-lcpll0";
108                         reg = <0x0001d0c4 0x3c>,
109                               <0x0001c870 0x4>;
110                         clocks = <&osc>;
111                         clock-output-names = "lcpll0", "clk_sata_refp",
112                                              "clk_sata_refn", "clk_sata_350",
113                                              "clk_sata_500";
114                 };
116                 lcpll1: lcpll1@1d138 {
117                         #clock-cells = <1>;
118                         compatible = "brcm,sr-lcpll1";
119                         reg = <0x0001d138 0x3c>,
120                               <0x0001c870 0x4>;
121                         clocks = <&osc>;
122                         clock-output-names = "lcpll1", "clk_wan",
123                                              "clk_usb_ref",
124                                              "clk_crmu_ts";
125                 };
127                 hsls_clk: hsls_clk {
128                         #clock-cells = <0>;
129                         compatible = "fixed-factor-clock";
130                         clocks = <&genpll3 1>;
131                         clock-div = <1>;
132                         clock-mult = <1>;
133                 };
135                 hsls_div2_clk: hsls_div2_clk {
136                         #clock-cells = <0>;
137                         compatible = "fixed-factor-clock";
138                         clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
139                         clock-div = <2>;
140                         clock-mult = <1>;
142                 };
144                 hsls_div4_clk: hsls_div4_clk {
145                         #clock-cells = <0>;
146                         compatible = "fixed-factor-clock";
147                         clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
148                         clock-div = <4>;
149                         clock-mult = <1>;
150                 };
152                 hsls_25m_clk: hsls_25m_clk {
153                         #clock-cells = <0>;
154                         compatible = "fixed-factor-clock";
155                         clocks = <&crmu_ref25m>;
156                         clock-div = <1>;
157                         clock-mult = <1>;
158                 };
160                 hsls_25m_div2_clk: hsls_25m_div2_clk {
161                         #clock-cells = <0>;
162                         compatible = "fixed-factor-clock";
163                         clocks = <&hsls_25m_clk>;
164                         clock-div = <2>;
165                         clock-mult = <1>;
166                 };
168                 sdio0_clk: sdio0_clk {
169                         #clock-cells = <0>;
170                         compatible = "fixed-factor-clock";
171                         clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
172                         clock-div = <1>;
173                         clock-mult = <1>;
174                 };
176                 sdio1_clk: sdio1_clk {
177                         #clock-cells = <0>;
178                         compatible = "fixed-factor-clock";
179                         clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
180                         clock-div = <1>;
181                         clock-mult = <1>;
182                 };