arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts

   1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
   2 //
   3 // Device Tree file for LX2160AQDS
   4 //
   5 // Copyright 2018 NXP
   6
   7 /dts-v1/;
   8
   9 #include "fsl-lx2160a.dtsi"
  10
  11 / {
  12         model = "NXP Layerscape LX2160AQDS";
  13         compatible = "fsl,lx2160a-qds", "fsl,lx2160a";
  14
  15         aliases {
  16                 crypto = &crypto;
  17                 serial0 = &uart0;
  18         };
  19
  20         chosen {
  21                 stdout-path = "serial0:115200n8";
  22         };
  23
  24         sb_3v3: regulator-sb3v3 {
  25                 compatible = "regulator-fixed";
  26                 regulator-name = "MC34717-3.3VSB";
  27                 regulator-min-microvolt = <3300000>;
  28                 regulator-max-microvolt = <3300000>;
  29                 regulator-boot-on;
  30                 regulator-always-on;
  31         };
  32 };
  33
  34 &crypto {
  35         status = "okay";
  36 };
  37
  38 &esdhc0 {
  39         status = "okay";
  40 };
  41
  42 &esdhc1 {
  43         status = "okay";
  44 };
  45
  46 &fspi {
  47         status = "okay";
  48
  49         mt35xu512aba0: flash@0 {
  50                 #address-cells = <1>;
  51                 #size-cells = <1>;
  52                 compatible = "jedec,spi-nor";
  53                 m25p,fast-read;
  54                 spi-max-frequency = <50000000>;
  55                 reg = <0>;
  56                 spi-rx-bus-width = <8>;
  57                 spi-tx-bus-width = <8>;
  58         };
  59 };
  60
  61 &i2c0 {
  62         status = "okay";
  63
  64         i2c-mux@77 {
  65                 compatible = "nxp,pca9547";
  66                 reg = <0x77>;
  67                 #address-cells = <1>;
  68                 #size-cells = <0>;
  69
  70                 i2c@2 {
  71                         #address-cells = <1>;
  72                         #size-cells = <0>;
  73                         reg = <0x2>;
  74
  75                         power-monitor@40 {
  76                                 compatible = "ti,ina220";
  77                                 reg = <0x40>;
  78                                 shunt-resistor = <500>;
  79                         };
  80
  81                         power-monitor@41 {
  82                                 compatible = "ti,ina220";
  83                                 reg = <0x41>;
  84                                 shunt-resistor = <1000>;
  85                         };
  86                 };
  87
  88                 i2c@3 {
  89                         #address-cells = <1>;
  90                         #size-cells = <0>;
  91                         reg = <0x3>;
  92
  93                         temperature-sensor@4c {
  94                                 compatible = "nxp,sa56004";
  95                                 reg = <0x4c>;
  96                                 vcc-supply = <&sb_3v3>;
  97                         };
  98
  99                         temperature-sensor@4d {
 100                                 compatible = "nxp,sa56004";
 101                                 reg = <0x4d>;
 102                                 vcc-supply = <&sb_3v3>;
 103                         };
 104
 105                         rtc@51 {
 106                                 compatible = "nxp,pcf2129";
 107                                 reg = <0x51>;
 108                         };
 109                 };
 110         };
 111 };
 112
 113 &sata0 {
 114         status = "okay";
 115 };
 116
 117 &sata1 {
 118         status = "okay";
 119 };
 120
 121 &sata2 {
 122         status = "okay";
 123 };
 124
 125 &sata3 {
 126         status = "okay";
 127 };
 128
 129 &uart0 {
 130         status = "okay";
 131 };
 132
 133 &uart1 {
 134         status = "okay";
 135 };
 136
 137 &usb0 {
 138         status = "okay";
 139 };
 140
 141 &usb1 {
 142         status = "okay";
 143 };