arm64: dts: Revert "specify console via command line"
[linux/fpc-iii.git] / arch / arm64 / boot / dts / ti / k3-am65.dtsi
blobaea36e29dd326c3ec646514bf6d11b5039f26132
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Device Tree Source for AM6 SoC Family
4  *
5  * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
6  */
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include <dt-bindings/interrupt-controller/arm-gic.h>
11 #include <dt-bindings/pinctrl/k3.h>
12 #include <dt-bindings/soc/ti,sci_pm_domain.h>
14 / {
15         model = "Texas Instruments K3 AM654 SoC";
16         compatible = "ti,am654";
17         interrupt-parent = <&gic500>;
18         #address-cells = <2>;
19         #size-cells = <2>;
21         aliases {
22                 serial0 = &wkup_uart0;
23                 serial1 = &mcu_uart0;
24                 serial2 = &main_uart0;
25                 serial3 = &main_uart1;
26                 serial4 = &main_uart2;
27                 i2c0 = &wkup_i2c0;
28                 i2c1 = &mcu_i2c0;
29                 i2c2 = &main_i2c0;
30                 i2c3 = &main_i2c1;
31                 i2c4 = &main_i2c2;
32                 i2c5 = &main_i2c3;
33         };
35         chosen { };
37         firmware {
38                 optee {
39                         compatible = "linaro,optee-tz";
40                         method = "smc";
41                 };
43                 psci: psci {
44                         compatible = "arm,psci-1.0";
45                         method = "smc";
46                 };
47         };
49         a53_timer0: timer-cl0-cpu0 {
50                 compatible = "arm,armv8-timer";
51                 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
52                              <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
53                              <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
54                              <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
55         };
57         pmu: pmu {
58                 compatible = "arm,armv8-pmuv3";
59                 /* Recommendation from GIC500 TRM Table A.3 */
60                 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
61         };
63         cbass_main: interconnect@100000 {
64                 compatible = "simple-bus";
65                 #address-cells = <2>;
66                 #size-cells = <2>;
67                 ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
68                          <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
69                          <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
70                          <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
71                          <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
72                          <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* MSMC SRAM */
73                          <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
74                          /* MCUSS Range */
75                          <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
76                          <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
77                          <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
78                          <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
79                          <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
80                          <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>,
81                          <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
82                          <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
83                          <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
84                          <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
85                          <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
86                          <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
87                          <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
88                          <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
90                 cbass_mcu: interconnect@28380000 {
91                         compatible = "simple-bus";
92                         #address-cells = <2>;
93                         #size-cells = <2>;
94                         ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
95                                  <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
96                                  <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
97                                  <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
98                                  <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
99                                  <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */
100                                  <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
101                                  <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
102                                  <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
103                                  <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */
104                                  <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /*  FSS OSPI0 data region 1 */
105                                  <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/
106                                  <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/
108                         cbass_wakeup: interconnect@42040000 {
109                                 compatible = "simple-bus";
110                                 #address-cells = <1>;
111                                 #size-cells = <1>;
112                                 /* WKUP  Basic peripherals */
113                                 ranges = <0x42040000 0x00 0x42040000 0x03ac2400>;
114                         };
115                 };
116         };
119 /* Now include the peripherals for each bus segments */
120 #include "k3-am65-main.dtsi"
121 #include "k3-am65-mcu.dtsi"
122 #include "k3-am65-wakeup.dtsi"