arm64: dts: Revert "specify console via command line"
[linux/fpc-iii.git] / arch / mips / pci / pci-bcm63xx.c
blob5548365605c02faa5d82d2b506aedd72b08ff24b
1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
6 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
7 */
9 #include <linux/types.h>
10 #include <linux/pci.h>
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/delay.h>
14 #include <linux/clk.h>
15 #include <asm/bootinfo.h>
17 #include <bcm63xx_reset.h>
19 #include "pci-bcm63xx.h"
22 * Allow PCI to be disabled at runtime depending on board nvram
23 * configuration
25 int bcm63xx_pci_enabled;
27 static struct resource bcm_pci_mem_resource = {
28 .name = "bcm63xx PCI memory space",
29 .start = BCM_PCI_MEM_BASE_PA,
30 .end = BCM_PCI_MEM_END_PA,
31 .flags = IORESOURCE_MEM
34 static struct resource bcm_pci_io_resource = {
35 .name = "bcm63xx PCI IO space",
36 .start = BCM_PCI_IO_BASE_PA,
37 #ifdef CONFIG_CARDBUS
38 .end = BCM_PCI_IO_HALF_PA,
39 #else
40 .end = BCM_PCI_IO_END_PA,
41 #endif
42 .flags = IORESOURCE_IO
45 struct pci_controller bcm63xx_controller = {
46 .pci_ops = &bcm63xx_pci_ops,
47 .io_resource = &bcm_pci_io_resource,
48 .mem_resource = &bcm_pci_mem_resource,
52 * We handle cardbus via a fake Cardbus bridge, memory and io spaces
53 * have to be clearly separated from PCI one since we have different
54 * memory decoder.
56 #ifdef CONFIG_CARDBUS
57 static struct resource bcm_cb_mem_resource = {
58 .name = "bcm63xx Cardbus memory space",
59 .start = BCM_CB_MEM_BASE_PA,
60 .end = BCM_CB_MEM_END_PA,
61 .flags = IORESOURCE_MEM
64 static struct resource bcm_cb_io_resource = {
65 .name = "bcm63xx Cardbus IO space",
66 .start = BCM_PCI_IO_HALF_PA + 1,
67 .end = BCM_PCI_IO_END_PA,
68 .flags = IORESOURCE_IO
71 struct pci_controller bcm63xx_cb_controller = {
72 .pci_ops = &bcm63xx_cb_ops,
73 .io_resource = &bcm_cb_io_resource,
74 .mem_resource = &bcm_cb_mem_resource,
76 #endif
78 static struct resource bcm_pcie_mem_resource = {
79 .name = "bcm63xx PCIe memory space",
80 .start = BCM_PCIE_MEM_BASE_PA,
81 .end = BCM_PCIE_MEM_END_PA,
82 .flags = IORESOURCE_MEM,
85 static struct resource bcm_pcie_io_resource = {
86 .name = "bcm63xx PCIe IO space",
87 .start = 0,
88 .end = 0,
89 .flags = 0,
92 struct pci_controller bcm63xx_pcie_controller = {
93 .pci_ops = &bcm63xx_pcie_ops,
94 .io_resource = &bcm_pcie_io_resource,
95 .mem_resource = &bcm_pcie_mem_resource,
98 static u32 bcm63xx_int_cfg_readl(u32 reg)
100 u32 tmp;
102 tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
103 tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
104 bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
105 iob();
106 return bcm_mpi_readl(MPI_PCICFGDATA_REG);
109 static void bcm63xx_int_cfg_writel(u32 val, u32 reg)
111 u32 tmp;
113 tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
114 tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
115 bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
116 bcm_mpi_writel(val, MPI_PCICFGDATA_REG);
119 void __iomem *pci_iospace_start;
121 static void __init bcm63xx_reset_pcie(void)
123 u32 val;
124 u32 reg;
126 /* enable SERDES */
127 if (BCMCPU_IS_6328())
128 reg = MISC_SERDES_CTRL_6328_REG;
129 else
130 reg = MISC_SERDES_CTRL_6362_REG;
132 val = bcm_misc_readl(reg);
133 val |= SERDES_PCIE_EN | SERDES_PCIE_EXD_EN;
134 bcm_misc_writel(val, reg);
136 /* reset the PCIe core */
137 bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
138 bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
139 mdelay(10);
141 bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
142 mdelay(10);
144 bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0);
145 mdelay(200);
148 static struct clk *pcie_clk;
150 static int __init bcm63xx_register_pcie(void)
152 u32 val;
154 /* enable clock */
155 pcie_clk = clk_get(NULL, "pcie");
156 if (IS_ERR_OR_NULL(pcie_clk))
157 return -ENODEV;
159 clk_prepare_enable(pcie_clk);
161 bcm63xx_reset_pcie();
163 /* configure the PCIe bridge */
164 val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
165 val |= OPT1_RD_BE_OPT_EN;
166 val |= OPT1_RD_REPLY_BE_FIX_EN;
167 val |= OPT1_PCIE_BRIDGE_HOLE_DET_EN;
168 val |= OPT1_L1_INT_STATUS_MASK_POL;
169 bcm_pcie_writel(val, PCIE_BRIDGE_OPT1_REG);
171 /* setup the interrupts */
172 val = bcm_pcie_readl(PCIE_BRIDGE_RC_INT_MASK_REG);
173 val |= PCIE_RC_INT_A | PCIE_RC_INT_B | PCIE_RC_INT_C | PCIE_RC_INT_D;
174 bcm_pcie_writel(val, PCIE_BRIDGE_RC_INT_MASK_REG);
176 val = bcm_pcie_readl(PCIE_BRIDGE_OPT2_REG);
177 /* enable credit checking and error checking */
178 val |= OPT2_TX_CREDIT_CHK_EN;
179 val |= OPT2_UBUS_UR_DECODE_DIS;
181 /* set device bus/func for the pcie device */
182 val |= (PCIE_BUS_DEVICE << OPT2_CFG_TYPE1_BUS_NO_SHIFT);
183 val |= OPT2_CFG_TYPE1_BD_SEL;
184 bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
186 /* setup class code as bridge */
187 val = bcm_pcie_readl(PCIE_IDVAL3_REG);
188 val &= ~IDVAL3_CLASS_CODE_MASK;
189 val |= (PCI_CLASS_BRIDGE_PCI << IDVAL3_SUBCLASS_SHIFT);
190 bcm_pcie_writel(val, PCIE_IDVAL3_REG);
192 /* disable bar1 size */
193 val = bcm_pcie_readl(PCIE_CONFIG2_REG);
194 val &= ~CONFIG2_BAR1_SIZE_MASK;
195 bcm_pcie_writel(val, PCIE_CONFIG2_REG);
197 /* set bar0 to little endian */
198 val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
199 val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
200 val |= BASEMASK_REMAP_EN;
201 bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
203 val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
204 bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
206 register_pci_controller(&bcm63xx_pcie_controller);
208 return 0;
211 static int __init bcm63xx_register_pci(void)
213 unsigned int mem_size;
214 u32 val;
216 * configuration access are done through IO space, remap 4
217 * first bytes to access it from CPU.
219 * this means that no io access from CPU should happen while
220 * we do a configuration cycle, but there's no way we can add
221 * a spinlock for each io access, so this is currently kind of
222 * broken on SMP.
224 pci_iospace_start = ioremap(BCM_PCI_IO_BASE_PA, 4);
225 if (!pci_iospace_start)
226 return -ENOMEM;
228 /* setup local bus to PCI access (PCI memory) */
229 val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK;
230 bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG);
231 bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG);
232 bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG);
234 /* set Cardbus IDSEL (type 0 cfg access on primary bus for
235 * this IDSEL will be done on Cardbus instead) */
236 val = bcm_pcmcia_readl(PCMCIA_C1_REG);
237 val &= ~PCMCIA_C1_CBIDSEL_MASK;
238 val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT);
239 bcm_pcmcia_writel(val, PCMCIA_C1_REG);
241 #ifdef CONFIG_CARDBUS
242 /* setup local bus to PCI access (Cardbus memory) */
243 val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK;
244 bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG);
245 bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG);
246 val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK;
247 bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG);
248 #else
249 /* disable second access windows */
250 bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
251 #endif
253 /* setup local bus to PCI access (IO memory), we have only 1
254 * IO window for both PCI and cardbus, but it cannot handle
255 * both at the same time, assume standard PCI for now, if
256 * cardbus card has IO zone, PCI fixup will change window to
257 * cardbus */
258 val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK;
259 bcm_mpi_writel(val, MPI_L2PIOBASE_REG);
260 bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG);
261 bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG);
263 /* enable PCI related GPIO pins */
264 bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG);
266 /* setup PCI to local bus access, used by PCI device to target
267 * local RAM while bus mastering */
268 bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3);
269 if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6368())
270 val = MPI_SP0_REMAP_ENABLE_MASK;
271 else
272 val = 0;
273 bcm_mpi_writel(val, MPI_SP0_REMAP_REG);
275 bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4);
276 bcm_mpi_writel(0, MPI_SP1_REMAP_REG);
278 mem_size = bcm63xx_get_memory_size();
280 /* 6348 before rev b0 exposes only 16 MB of RAM memory through
281 * PCI, throw a warning if we have more memory */
282 if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) {
283 if (mem_size > (16 * 1024 * 1024))
284 printk(KERN_WARNING "bcm63xx: this CPU "
285 "revision cannot handle more than 16MB "
286 "of RAM for PCI bus mastering\n");
287 } else {
288 /* setup sp0 range to local RAM size */
289 bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG);
290 bcm_mpi_writel(0, MPI_SP1_RANGE_REG);
293 /* change host bridge retry counter to infinite number of
294 * retry, needed for some broadcom wifi cards with Silicon
295 * Backplane bus where access to srom seems very slow */
296 val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS);
297 val &= ~REG_TIMER_RETRY_MASK;
298 bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS);
300 /* enable memory decoder and bus mastering */
301 val = bcm63xx_int_cfg_readl(PCI_COMMAND);
302 val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
303 bcm63xx_int_cfg_writel(val, PCI_COMMAND);
305 /* enable read prefetching & disable byte swapping for bus
306 * mastering transfers */
307 val = bcm_mpi_readl(MPI_PCIMODESEL_REG);
308 val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK;
309 val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK;
310 val &= ~MPI_PCIMODESEL_PREFETCH_MASK;
311 val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT);
312 bcm_mpi_writel(val, MPI_PCIMODESEL_REG);
314 /* enable pci interrupt */
315 val = bcm_mpi_readl(MPI_LOCINT_REG);
316 val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT);
317 bcm_mpi_writel(val, MPI_LOCINT_REG);
319 register_pci_controller(&bcm63xx_controller);
321 #ifdef CONFIG_CARDBUS
322 register_pci_controller(&bcm63xx_cb_controller);
323 #endif
325 /* mark memory space used for IO mapping as reserved */
326 request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE,
327 "bcm63xx PCI IO space");
328 return 0;
332 static int __init bcm63xx_pci_init(void)
334 if (!bcm63xx_pci_enabled)
335 return -ENODEV;
337 switch (bcm63xx_get_cpu_id()) {
338 case BCM6328_CPU_ID:
339 case BCM6362_CPU_ID:
340 return bcm63xx_register_pcie();
341 case BCM3368_CPU_ID:
342 case BCM6348_CPU_ID:
343 case BCM6358_CPU_ID:
344 case BCM6368_CPU_ID:
345 return bcm63xx_register_pci();
346 default:
347 return -ENODEV;
351 arch_initcall(bcm63xx_pci_init);