arm64: dts: Revert "specify console via command line"
[linux/fpc-iii.git] / arch / mips / sgi-ip32 / ip32-irq.c
bloba6a0ff7f5aed00bb5161c5783f5895e99ceef56e
1 /*
2 * Code to handle IP32 IRQs
4 * This file is subject to the terms and conditions of the GNU General Public
5 * License. See the file "COPYING" in the main directory of this archive
6 * for more details.
8 * Copyright (C) 2000 Harald Koerfgen
9 * Copyright (C) 2001 Keith M Wesolowski
11 #include <linux/init.h>
12 #include <linux/kernel_stat.h>
13 #include <linux/types.h>
14 #include <linux/interrupt.h>
15 #include <linux/irq.h>
16 #include <linux/bitops.h>
17 #include <linux/kernel.h>
18 #include <linux/mm.h>
19 #include <linux/random.h>
20 #include <linux/sched.h>
21 #include <linux/sched/debug.h>
23 #include <asm/irq_cpu.h>
24 #include <asm/mipsregs.h>
25 #include <asm/signal.h>
26 #include <asm/time.h>
27 #include <asm/ip32/crime.h>
28 #include <asm/ip32/mace.h>
29 #include <asm/ip32/ip32_ints.h>
31 /* issue a PIO read to make sure no PIO writes are pending */
32 static inline void flush_crime_bus(void)
34 crime->control;
37 static inline void flush_mace_bus(void)
39 mace->perif.ctrl.misc;
43 * O2 irq map
45 * IP0 -> software (ignored)
46 * IP1 -> software (ignored)
47 * IP2 -> (irq0) C crime 1.1 all interrupts; crime 1.5 ???
48 * IP3 -> (irq1) X unknown
49 * IP4 -> (irq2) X unknown
50 * IP5 -> (irq3) X unknown
51 * IP6 -> (irq4) X unknown
52 * IP7 -> (irq5) 7 CPU count/compare timer (system timer)
54 * crime: (C)
56 * CRIME_INT_STAT 31:0:
58 * 0 -> 8 Video in 1
59 * 1 -> 9 Video in 2
60 * 2 -> 10 Video out
61 * 3 -> 11 Mace ethernet
62 * 4 -> S SuperIO sub-interrupt
63 * 5 -> M Miscellaneous sub-interrupt
64 * 6 -> A Audio sub-interrupt
65 * 7 -> 15 PCI bridge errors
66 * 8 -> 16 PCI SCSI aic7xxx 0
67 * 9 -> 17 PCI SCSI aic7xxx 1
68 * 10 -> 18 PCI slot 0
69 * 11 -> 19 unused (PCI slot 1)
70 * 12 -> 20 unused (PCI slot 2)
71 * 13 -> 21 unused (PCI shared 0)
72 * 14 -> 22 unused (PCI shared 1)
73 * 15 -> 23 unused (PCI shared 2)
74 * 16 -> 24 GBE0 (E)
75 * 17 -> 25 GBE1 (E)
76 * 18 -> 26 GBE2 (E)
77 * 19 -> 27 GBE3 (E)
78 * 20 -> 28 CPU errors
79 * 21 -> 29 Memory errors
80 * 22 -> 30 RE empty edge (E)
81 * 23 -> 31 RE full edge (E)
82 * 24 -> 32 RE idle edge (E)
83 * 25 -> 33 RE empty level
84 * 26 -> 34 RE full level
85 * 27 -> 35 RE idle level
86 * 28 -> 36 unused (software 0) (E)
87 * 29 -> 37 unused (software 1) (E)
88 * 30 -> 38 unused (software 2) - crime 1.5 CPU SysCorError (E)
89 * 31 -> 39 VICE
91 * S, M, A: Use the MACE ISA interrupt register
92 * MACE_ISA_INT_STAT 31:0
94 * 0-7 -> 40-47 Audio
95 * 8 -> 48 RTC
96 * 9 -> 49 Keyboard
97 * 10 -> X Keyboard polled
98 * 11 -> 51 Mouse
99 * 12 -> X Mouse polled
100 * 13-15 -> 53-55 Count/compare timers
101 * 16-19 -> 56-59 Parallel (16 E)
102 * 20-25 -> 60-62 Serial 1 (22 E)
103 * 26-31 -> 66-71 Serial 2 (28 E)
105 * Note that this means IRQs 12-14, 50, and 52 do not exist. This is a
106 * different IRQ map than IRIX uses, but that's OK as Linux irq handling
107 * is quite different anyway.
110 /* Some initial interrupts to set up */
111 extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
112 extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
114 static struct irqaction memerr_irq = {
115 .handler = crime_memerr_intr,
116 .name = "CRIME memory error",
119 static struct irqaction cpuerr_irq = {
120 .handler = crime_cpuerr_intr,
121 .name = "CRIME CPU error",
125 * This is for pure CRIME interrupts - ie not MACE. The advantage?
126 * We get to split the register in half and do faster lookups.
129 static uint64_t crime_mask;
131 static inline void crime_enable_irq(struct irq_data *d)
133 unsigned int bit = d->irq - CRIME_IRQ_BASE;
135 crime_mask |= 1 << bit;
136 crime->imask = crime_mask;
139 static inline void crime_disable_irq(struct irq_data *d)
141 unsigned int bit = d->irq - CRIME_IRQ_BASE;
143 crime_mask &= ~(1 << bit);
144 crime->imask = crime_mask;
145 flush_crime_bus();
148 static struct irq_chip crime_level_interrupt = {
149 .name = "IP32 CRIME",
150 .irq_mask = crime_disable_irq,
151 .irq_unmask = crime_enable_irq,
154 static void crime_edge_mask_and_ack_irq(struct irq_data *d)
156 unsigned int bit = d->irq - CRIME_IRQ_BASE;
157 uint64_t crime_int;
159 /* Edge triggered interrupts must be cleared. */
160 crime_int = crime->hard_int;
161 crime_int &= ~(1 << bit);
162 crime->hard_int = crime_int;
164 crime_disable_irq(d);
167 static struct irq_chip crime_edge_interrupt = {
168 .name = "IP32 CRIME",
169 .irq_ack = crime_edge_mask_and_ack_irq,
170 .irq_mask = crime_disable_irq,
171 .irq_mask_ack = crime_edge_mask_and_ack_irq,
172 .irq_unmask = crime_enable_irq,
176 * This is for MACE PCI interrupts. We can decrease bus traffic by masking
177 * as close to the source as possible. This also means we can take the
178 * next chunk of the CRIME register in one piece.
181 static unsigned long macepci_mask;
183 static void enable_macepci_irq(struct irq_data *d)
185 macepci_mask |= MACEPCI_CONTROL_INT(d->irq - MACEPCI_SCSI0_IRQ);
186 mace->pci.control = macepci_mask;
187 crime_mask |= 1 << (d->irq - CRIME_IRQ_BASE);
188 crime->imask = crime_mask;
191 static void disable_macepci_irq(struct irq_data *d)
193 crime_mask &= ~(1 << (d->irq - CRIME_IRQ_BASE));
194 crime->imask = crime_mask;
195 flush_crime_bus();
196 macepci_mask &= ~MACEPCI_CONTROL_INT(d->irq - MACEPCI_SCSI0_IRQ);
197 mace->pci.control = macepci_mask;
198 flush_mace_bus();
201 static struct irq_chip ip32_macepci_interrupt = {
202 .name = "IP32 MACE PCI",
203 .irq_mask = disable_macepci_irq,
204 .irq_unmask = enable_macepci_irq,
207 /* This is used for MACE ISA interrupts. That means bits 4-6 in the
208 * CRIME register.
211 #define MACEISA_AUDIO_INT (MACEISA_AUDIO_SW_INT | \
212 MACEISA_AUDIO_SC_INT | \
213 MACEISA_AUDIO1_DMAT_INT | \
214 MACEISA_AUDIO1_OF_INT | \
215 MACEISA_AUDIO2_DMAT_INT | \
216 MACEISA_AUDIO2_MERR_INT | \
217 MACEISA_AUDIO3_DMAT_INT | \
218 MACEISA_AUDIO3_MERR_INT)
219 #define MACEISA_MISC_INT (MACEISA_RTC_INT | \
220 MACEISA_KEYB_INT | \
221 MACEISA_KEYB_POLL_INT | \
222 MACEISA_MOUSE_INT | \
223 MACEISA_MOUSE_POLL_INT | \
224 MACEISA_TIMER0_INT | \
225 MACEISA_TIMER1_INT | \
226 MACEISA_TIMER2_INT)
227 #define MACEISA_SUPERIO_INT (MACEISA_PARALLEL_INT | \
228 MACEISA_PAR_CTXA_INT | \
229 MACEISA_PAR_CTXB_INT | \
230 MACEISA_PAR_MERR_INT | \
231 MACEISA_SERIAL1_INT | \
232 MACEISA_SERIAL1_TDMAT_INT | \
233 MACEISA_SERIAL1_TDMAPR_INT | \
234 MACEISA_SERIAL1_TDMAME_INT | \
235 MACEISA_SERIAL1_RDMAT_INT | \
236 MACEISA_SERIAL1_RDMAOR_INT | \
237 MACEISA_SERIAL2_INT | \
238 MACEISA_SERIAL2_TDMAT_INT | \
239 MACEISA_SERIAL2_TDMAPR_INT | \
240 MACEISA_SERIAL2_TDMAME_INT | \
241 MACEISA_SERIAL2_RDMAT_INT | \
242 MACEISA_SERIAL2_RDMAOR_INT)
244 static unsigned long maceisa_mask;
246 static void enable_maceisa_irq(struct irq_data *d)
248 unsigned int crime_int = 0;
250 pr_debug("maceisa enable: %u\n", d->irq);
252 switch (d->irq) {
253 case MACEISA_AUDIO_SW_IRQ ... MACEISA_AUDIO3_MERR_IRQ:
254 crime_int = MACE_AUDIO_INT;
255 break;
256 case MACEISA_RTC_IRQ ... MACEISA_TIMER2_IRQ:
257 crime_int = MACE_MISC_INT;
258 break;
259 case MACEISA_PARALLEL_IRQ ... MACEISA_SERIAL2_RDMAOR_IRQ:
260 crime_int = MACE_SUPERIO_INT;
261 break;
263 pr_debug("crime_int %08x enabled\n", crime_int);
264 crime_mask |= crime_int;
265 crime->imask = crime_mask;
266 maceisa_mask |= 1 << (d->irq - MACEISA_AUDIO_SW_IRQ);
267 mace->perif.ctrl.imask = maceisa_mask;
270 static void disable_maceisa_irq(struct irq_data *d)
272 unsigned int crime_int = 0;
274 maceisa_mask &= ~(1 << (d->irq - MACEISA_AUDIO_SW_IRQ));
275 if (!(maceisa_mask & MACEISA_AUDIO_INT))
276 crime_int |= MACE_AUDIO_INT;
277 if (!(maceisa_mask & MACEISA_MISC_INT))
278 crime_int |= MACE_MISC_INT;
279 if (!(maceisa_mask & MACEISA_SUPERIO_INT))
280 crime_int |= MACE_SUPERIO_INT;
281 crime_mask &= ~crime_int;
282 crime->imask = crime_mask;
283 flush_crime_bus();
284 mace->perif.ctrl.imask = maceisa_mask;
285 flush_mace_bus();
288 static void mask_and_ack_maceisa_irq(struct irq_data *d)
290 unsigned long mace_int;
292 /* edge triggered */
293 mace_int = mace->perif.ctrl.istat;
294 mace_int &= ~(1 << (d->irq - MACEISA_AUDIO_SW_IRQ));
295 mace->perif.ctrl.istat = mace_int;
297 disable_maceisa_irq(d);
300 static struct irq_chip ip32_maceisa_level_interrupt = {
301 .name = "IP32 MACE ISA",
302 .irq_mask = disable_maceisa_irq,
303 .irq_unmask = enable_maceisa_irq,
306 static struct irq_chip ip32_maceisa_edge_interrupt = {
307 .name = "IP32 MACE ISA",
308 .irq_ack = mask_and_ack_maceisa_irq,
309 .irq_mask = disable_maceisa_irq,
310 .irq_mask_ack = mask_and_ack_maceisa_irq,
311 .irq_unmask = enable_maceisa_irq,
314 /* This is used for regular non-ISA, non-PCI MACE interrupts. That means
315 * bits 0-3 and 7 in the CRIME register.
318 static void enable_mace_irq(struct irq_data *d)
320 unsigned int bit = d->irq - CRIME_IRQ_BASE;
322 crime_mask |= (1 << bit);
323 crime->imask = crime_mask;
326 static void disable_mace_irq(struct irq_data *d)
328 unsigned int bit = d->irq - CRIME_IRQ_BASE;
330 crime_mask &= ~(1 << bit);
331 crime->imask = crime_mask;
332 flush_crime_bus();
335 static struct irq_chip ip32_mace_interrupt = {
336 .name = "IP32 MACE",
337 .irq_mask = disable_mace_irq,
338 .irq_unmask = enable_mace_irq,
341 static void ip32_unknown_interrupt(void)
343 printk("Unknown interrupt occurred!\n");
344 printk("cp0_status: %08x\n", read_c0_status());
345 printk("cp0_cause: %08x\n", read_c0_cause());
346 printk("CRIME intr mask: %016lx\n", crime->imask);
347 printk("CRIME intr status: %016lx\n", crime->istat);
348 printk("CRIME hardware intr register: %016lx\n", crime->hard_int);
349 printk("MACE ISA intr mask: %08lx\n", mace->perif.ctrl.imask);
350 printk("MACE ISA intr status: %08lx\n", mace->perif.ctrl.istat);
351 printk("MACE PCI control register: %08x\n", mace->pci.control);
353 printk("Register dump:\n");
354 show_regs(get_irq_regs());
356 printk("Please mail this report to linux-mips@linux-mips.org\n");
357 printk("Spinning...");
358 while(1) ;
361 /* CRIME 1.1 appears to deliver all interrupts to this one pin. */
362 /* change this to loop over all edge-triggered irqs, exception masked out ones */
363 static void ip32_irq0(void)
365 uint64_t crime_int;
366 int irq = 0;
369 * Sanity check interrupt numbering enum.
370 * MACE got 32 interrupts and there are 32 MACE ISA interrupts daisy
371 * chained.
373 BUILD_BUG_ON(CRIME_VICE_IRQ - MACE_VID_IN1_IRQ != 31);
374 BUILD_BUG_ON(MACEISA_SERIAL2_RDMAOR_IRQ - MACEISA_AUDIO_SW_IRQ != 31);
376 crime_int = crime->istat & crime_mask;
378 /* crime sometime delivers spurious interrupts, ignore them */
379 if (unlikely(crime_int == 0))
380 return;
382 irq = MACE_VID_IN1_IRQ + __ffs(crime_int);
384 if (crime_int & CRIME_MACEISA_INT_MASK) {
385 unsigned long mace_int = mace->perif.ctrl.istat;
386 irq = __ffs(mace_int & maceisa_mask) + MACEISA_AUDIO_SW_IRQ;
389 pr_debug("*irq %u*\n", irq);
390 do_IRQ(irq);
393 static void ip32_irq1(void)
395 ip32_unknown_interrupt();
398 static void ip32_irq2(void)
400 ip32_unknown_interrupt();
403 static void ip32_irq3(void)
405 ip32_unknown_interrupt();
408 static void ip32_irq4(void)
410 ip32_unknown_interrupt();
413 static void ip32_irq5(void)
415 do_IRQ(MIPS_CPU_IRQ_BASE + 7);
418 asmlinkage void plat_irq_dispatch(void)
420 unsigned int pending = read_c0_status() & read_c0_cause();
422 if (likely(pending & IE_IRQ0))
423 ip32_irq0();
424 else if (unlikely(pending & IE_IRQ1))
425 ip32_irq1();
426 else if (unlikely(pending & IE_IRQ2))
427 ip32_irq2();
428 else if (unlikely(pending & IE_IRQ3))
429 ip32_irq3();
430 else if (unlikely(pending & IE_IRQ4))
431 ip32_irq4();
432 else if (likely(pending & IE_IRQ5))
433 ip32_irq5();
436 void __init arch_init_irq(void)
438 unsigned int irq;
440 /* Install our interrupt handler, then clear and disable all
441 * CRIME and MACE interrupts. */
442 crime->imask = 0;
443 crime->hard_int = 0;
444 crime->soft_int = 0;
445 mace->perif.ctrl.istat = 0;
446 mace->perif.ctrl.imask = 0;
448 mips_cpu_irq_init();
449 for (irq = CRIME_IRQ_BASE; irq <= IP32_IRQ_MAX; irq++) {
450 switch (irq) {
451 case MACE_VID_IN1_IRQ ... MACE_PCI_BRIDGE_IRQ:
452 irq_set_chip_and_handler_name(irq,
453 &ip32_mace_interrupt,
454 handle_level_irq,
455 "level");
456 break;
458 case MACEPCI_SCSI0_IRQ ... MACEPCI_SHARED2_IRQ:
459 irq_set_chip_and_handler_name(irq,
460 &ip32_macepci_interrupt,
461 handle_level_irq,
462 "level");
463 break;
465 case CRIME_CPUERR_IRQ:
466 case CRIME_MEMERR_IRQ:
467 irq_set_chip_and_handler_name(irq,
468 &crime_level_interrupt,
469 handle_level_irq,
470 "level");
471 break;
473 case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ:
474 case CRIME_RE_EMPTY_E_IRQ ... CRIME_RE_IDLE_E_IRQ:
475 case CRIME_SOFT0_IRQ ... CRIME_SOFT2_IRQ:
476 case CRIME_VICE_IRQ:
477 irq_set_chip_and_handler_name(irq,
478 &crime_edge_interrupt,
479 handle_edge_irq,
480 "edge");
481 break;
483 case MACEISA_PARALLEL_IRQ:
484 case MACEISA_SERIAL1_TDMAPR_IRQ:
485 case MACEISA_SERIAL2_TDMAPR_IRQ:
486 irq_set_chip_and_handler_name(irq,
487 &ip32_maceisa_edge_interrupt,
488 handle_edge_irq,
489 "edge");
490 break;
492 default:
493 irq_set_chip_and_handler_name(irq,
494 &ip32_maceisa_level_interrupt,
495 handle_level_irq,
496 "level");
497 break;
500 setup_irq(CRIME_MEMERR_IRQ, &memerr_irq);
501 setup_irq(CRIME_CPUERR_IRQ, &cpuerr_irq);
503 #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
504 change_c0_status(ST0_IM, ALLINTS);