arm64: dts: Revert "specify console via command line"
[linux/fpc-iii.git] / arch / powerpc / kernel / ptrace32.c
blobf37eb53de1a1f1aa152b70611445cd05cd18278b
1 /*
2 * ptrace for 32-bit processes running on a 64-bit kernel.
4 * PowerPC version
5 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
7 * Derived from "arch/m68k/kernel/ptrace.c"
8 * Copyright (C) 1994 by Hamish Macdonald
9 * Taken from linux/kernel/ptrace.c and modified for M680x0.
10 * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
12 * Modified by Cort Dougan (cort@hq.fsmlabs.com)
13 * and Paul Mackerras (paulus@samba.org).
15 * This file is subject to the terms and conditions of the GNU General
16 * Public License. See the file COPYING in the main directory of
17 * this archive for more details.
20 #include <linux/kernel.h>
21 #include <linux/sched.h>
22 #include <linux/mm.h>
23 #include <linux/smp.h>
24 #include <linux/errno.h>
25 #include <linux/ptrace.h>
26 #include <linux/regset.h>
27 #include <linux/user.h>
28 #include <linux/security.h>
29 #include <linux/signal.h>
30 #include <linux/compat.h>
32 #include <linux/uaccess.h>
33 #include <asm/page.h>
34 #include <asm/pgtable.h>
35 #include <asm/switch_to.h>
38 * does not yet catch signals sent when the child dies.
39 * in exit.c or in signal.c.
42 /* Macros to workout the correct index for the FPR in the thread struct */
43 #define FPRNUMBER(i) (((i) - PT_FPR0) >> 1)
44 #define FPRHALF(i) (((i) - PT_FPR0) & 1)
45 #define FPRINDEX(i) TS_FPRWIDTH * FPRNUMBER(i) * 2 + FPRHALF(i)
47 long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
48 compat_ulong_t caddr, compat_ulong_t cdata)
50 unsigned long addr = caddr;
51 unsigned long data = cdata;
52 int ret;
54 switch (request) {
56 * Read 4 bytes of the other process' storage
57 * data is a pointer specifying where the user wants the
58 * 4 bytes copied into
59 * addr is a pointer in the user's storage that contains an 8 byte
60 * address in the other process of the 4 bytes that is to be read
61 * (this is run in a 32-bit process looking at a 64-bit process)
62 * when I and D space are separate, these will need to be fixed.
64 case PPC_PTRACE_PEEKTEXT_3264:
65 case PPC_PTRACE_PEEKDATA_3264: {
66 u32 tmp;
67 int copied;
68 u32 __user * addrOthers;
70 ret = -EIO;
72 /* Get the addr in the other process that we want to read */
73 if (get_user(addrOthers, (u32 __user * __user *)addr) != 0)
74 break;
76 copied = ptrace_access_vm(child, (u64)addrOthers, &tmp,
77 sizeof(tmp), FOLL_FORCE);
78 if (copied != sizeof(tmp))
79 break;
80 ret = put_user(tmp, (u32 __user *)data);
81 break;
84 /* Read a register (specified by ADDR) out of the "user area" */
85 case PTRACE_PEEKUSR: {
86 int index;
87 unsigned long tmp;
89 ret = -EIO;
90 /* convert to index and check */
91 index = (unsigned long) addr >> 2;
92 if ((addr & 3) || (index > PT_FPSCR32))
93 break;
95 CHECK_FULL_REGS(child->thread.regs);
96 if (index < PT_FPR0) {
97 ret = ptrace_get_reg(child, index, &tmp);
98 if (ret)
99 break;
100 } else {
101 flush_fp_to_thread(child);
103 * the user space code considers the floating point
104 * to be an array of unsigned int (32 bits) - the
105 * index passed in is based on this assumption.
107 tmp = ((unsigned int *)child->thread.fp_state.fpr)
108 [FPRINDEX(index)];
110 ret = put_user((unsigned int)tmp, (u32 __user *)data);
111 break;
115 * Read 4 bytes out of the other process' pt_regs area
116 * data is a pointer specifying where the user wants the
117 * 4 bytes copied into
118 * addr is the offset into the other process' pt_regs structure
119 * that is to be read
120 * (this is run in a 32-bit process looking at a 64-bit process)
122 case PPC_PTRACE_PEEKUSR_3264: {
123 u32 index;
124 u32 reg32bits;
125 u64 tmp;
126 u32 numReg;
127 u32 part;
129 ret = -EIO;
130 /* Determine which register the user wants */
131 index = (u64)addr >> 2;
132 numReg = index / 2;
133 /* Determine which part of the register the user wants */
134 if (index % 2)
135 part = 1; /* want the 2nd half of the register (right-most). */
136 else
137 part = 0; /* want the 1st half of the register (left-most). */
139 /* Validate the input - check to see if address is on the wrong boundary
140 * or beyond the end of the user area
142 if ((addr & 3) || numReg > PT_FPSCR)
143 break;
145 CHECK_FULL_REGS(child->thread.regs);
146 if (numReg >= PT_FPR0) {
147 flush_fp_to_thread(child);
148 /* get 64 bit FPR */
149 tmp = child->thread.fp_state.fpr[numReg - PT_FPR0][0];
150 } else { /* register within PT_REGS struct */
151 unsigned long tmp2;
152 ret = ptrace_get_reg(child, numReg, &tmp2);
153 if (ret)
154 break;
155 tmp = tmp2;
157 reg32bits = ((u32*)&tmp)[part];
158 ret = put_user(reg32bits, (u32 __user *)data);
159 break;
163 * Write 4 bytes into the other process' storage
164 * data is the 4 bytes that the user wants written
165 * addr is a pointer in the user's storage that contains an
166 * 8 byte address in the other process where the 4 bytes
167 * that is to be written
168 * (this is run in a 32-bit process looking at a 64-bit process)
169 * when I and D space are separate, these will need to be fixed.
171 case PPC_PTRACE_POKETEXT_3264:
172 case PPC_PTRACE_POKEDATA_3264: {
173 u32 tmp = data;
174 u32 __user * addrOthers;
176 /* Get the addr in the other process that we want to write into */
177 ret = -EIO;
178 if (get_user(addrOthers, (u32 __user * __user *)addr) != 0)
179 break;
180 ret = 0;
181 if (ptrace_access_vm(child, (u64)addrOthers, &tmp,
182 sizeof(tmp),
183 FOLL_FORCE | FOLL_WRITE) == sizeof(tmp))
184 break;
185 ret = -EIO;
186 break;
189 /* write the word at location addr in the USER area */
190 case PTRACE_POKEUSR: {
191 unsigned long index;
193 ret = -EIO;
194 /* convert to index and check */
195 index = (unsigned long) addr >> 2;
196 if ((addr & 3) || (index > PT_FPSCR32))
197 break;
199 CHECK_FULL_REGS(child->thread.regs);
200 if (index < PT_FPR0) {
201 ret = ptrace_put_reg(child, index, data);
202 } else {
203 flush_fp_to_thread(child);
205 * the user space code considers the floating point
206 * to be an array of unsigned int (32 bits) - the
207 * index passed in is based on this assumption.
209 ((unsigned int *)child->thread.fp_state.fpr)
210 [FPRINDEX(index)] = data;
211 ret = 0;
213 break;
217 * Write 4 bytes into the other process' pt_regs area
218 * data is the 4 bytes that the user wants written
219 * addr is the offset into the other process' pt_regs structure
220 * that is to be written into
221 * (this is run in a 32-bit process looking at a 64-bit process)
223 case PPC_PTRACE_POKEUSR_3264: {
224 u32 index;
225 u32 numReg;
227 ret = -EIO;
228 /* Determine which register the user wants */
229 index = (u64)addr >> 2;
230 numReg = index / 2;
233 * Validate the input - check to see if address is on the
234 * wrong boundary or beyond the end of the user area
236 if ((addr & 3) || (numReg > PT_FPSCR))
237 break;
238 CHECK_FULL_REGS(child->thread.regs);
239 if (numReg < PT_FPR0) {
240 unsigned long freg;
241 ret = ptrace_get_reg(child, numReg, &freg);
242 if (ret)
243 break;
244 if (index % 2)
245 freg = (freg & ~0xfffffffful) | (data & 0xfffffffful);
246 else
247 freg = (freg & 0xfffffffful) | (data << 32);
248 ret = ptrace_put_reg(child, numReg, freg);
249 } else {
250 u64 *tmp;
251 flush_fp_to_thread(child);
252 /* get 64 bit FPR ... */
253 tmp = &child->thread.fp_state.fpr[numReg - PT_FPR0][0];
254 /* ... write the 32 bit part we want */
255 ((u32 *)tmp)[index % 2] = data;
256 ret = 0;
258 break;
261 case PTRACE_GET_DEBUGREG: {
262 #ifndef CONFIG_PPC_ADV_DEBUG_REGS
263 unsigned long dabr_fake;
264 #endif
265 ret = -EINVAL;
266 /* We only support one DABR and no IABRS at the moment */
267 if (addr > 0)
268 break;
269 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
270 ret = put_user(child->thread.debug.dac1, (u32 __user *)data);
271 #else
272 dabr_fake = (
273 (child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) |
274 (child->thread.hw_brk.type & HW_BRK_TYPE_DABR));
275 ret = put_user(dabr_fake, (u32 __user *)data);
276 #endif
277 break;
280 case PTRACE_GETREGS: /* Get all pt_regs from the child. */
281 return copy_regset_to_user(
282 child, task_user_regset_view(current), 0,
283 0, PT_REGS_COUNT * sizeof(compat_long_t),
284 compat_ptr(data));
286 case PTRACE_SETREGS: /* Set all gp regs in the child. */
287 return copy_regset_from_user(
288 child, task_user_regset_view(current), 0,
289 0, PT_REGS_COUNT * sizeof(compat_long_t),
290 compat_ptr(data));
292 case PTRACE_GETFPREGS:
293 case PTRACE_SETFPREGS:
294 case PTRACE_GETVRREGS:
295 case PTRACE_SETVRREGS:
296 case PTRACE_GETVSRREGS:
297 case PTRACE_SETVSRREGS:
298 case PTRACE_GETREGS64:
299 case PTRACE_SETREGS64:
300 case PTRACE_KILL:
301 case PTRACE_SINGLESTEP:
302 case PTRACE_DETACH:
303 case PTRACE_SET_DEBUGREG:
304 case PTRACE_SYSCALL:
305 case PTRACE_CONT:
306 case PPC_PTRACE_GETHWDBGINFO:
307 case PPC_PTRACE_SETHWDEBUG:
308 case PPC_PTRACE_DELHWDEBUG:
309 ret = arch_ptrace(child, request, addr, data);
310 break;
312 default:
313 ret = compat_ptrace_request(child, request, addr, data);
314 break;
317 return ret;