arm64: dts: Revert "specify console via command line"
[linux/fpc-iii.git] / arch / powerpc / kvm / book3s_interrupts.S
blobf7ad99d972ce344148fe4c7e05873b1f72aa93aa
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  *
4  * Copyright SUSE Linux Products GmbH 2009
5  *
6  * Authors: Alexander Graf <agraf@suse.de>
7  */
9 #include <asm/ppc_asm.h>
10 #include <asm/kvm_asm.h>
11 #include <asm/reg.h>
12 #include <asm/page.h>
13 #include <asm/asm-offsets.h>
14 #include <asm/exception-64s.h>
15 #include <asm/asm-compat.h>
17 #if defined(CONFIG_PPC_BOOK3S_64)
18 #ifdef PPC64_ELF_ABI_v2
19 #define FUNC(name)              name
20 #else
21 #define FUNC(name)              GLUE(.,name)
22 #endif
23 #define GET_SHADOW_VCPU(reg)    addi    reg, r13, PACA_SVCPU
25 #elif defined(CONFIG_PPC_BOOK3S_32)
26 #define FUNC(name)              name
27 #define GET_SHADOW_VCPU(reg)    lwz     reg, (THREAD + THREAD_KVM_SVCPU)(r2)
29 #endif /* CONFIG_PPC_BOOK3S_XX */
31 #define VCPU_LOAD_NVGPRS(vcpu) \
32         PPC_LL  r14, VCPU_GPR(R14)(vcpu); \
33         PPC_LL  r15, VCPU_GPR(R15)(vcpu); \
34         PPC_LL  r16, VCPU_GPR(R16)(vcpu); \
35         PPC_LL  r17, VCPU_GPR(R17)(vcpu); \
36         PPC_LL  r18, VCPU_GPR(R18)(vcpu); \
37         PPC_LL  r19, VCPU_GPR(R19)(vcpu); \
38         PPC_LL  r20, VCPU_GPR(R20)(vcpu); \
39         PPC_LL  r21, VCPU_GPR(R21)(vcpu); \
40         PPC_LL  r22, VCPU_GPR(R22)(vcpu); \
41         PPC_LL  r23, VCPU_GPR(R23)(vcpu); \
42         PPC_LL  r24, VCPU_GPR(R24)(vcpu); \
43         PPC_LL  r25, VCPU_GPR(R25)(vcpu); \
44         PPC_LL  r26, VCPU_GPR(R26)(vcpu); \
45         PPC_LL  r27, VCPU_GPR(R27)(vcpu); \
46         PPC_LL  r28, VCPU_GPR(R28)(vcpu); \
47         PPC_LL  r29, VCPU_GPR(R29)(vcpu); \
48         PPC_LL  r30, VCPU_GPR(R30)(vcpu); \
49         PPC_LL  r31, VCPU_GPR(R31)(vcpu); \
51 /*****************************************************************************
52  *                                                                           *
53  *     Guest entry / exit code that is in kernel module memory (highmem)     *
54  *                                                                           *
55  ****************************************************************************/
57 /* Registers:
58  *  r3: kvm_run pointer
59  *  r4: vcpu pointer
60  */
61 _GLOBAL(__kvmppc_vcpu_run)
63 kvm_start_entry:
64         /* Write correct stack frame */
65         mflr    r0
66         PPC_STL r0,PPC_LR_STKOFF(r1)
68         /* Save host state to the stack */
69         PPC_STLU r1, -SWITCH_FRAME_SIZE(r1)
71         /* Save r3 (kvm_run) and r4 (vcpu) */
72         SAVE_2GPRS(3, r1)
74         /* Save non-volatile registers (r14 - r31) */
75         SAVE_NVGPRS(r1)
77         /* Save CR */
78         mfcr    r14
79         stw     r14, _CCR(r1)
81         /* Save LR */
82         PPC_STL r0, _LINK(r1)
84         /* Load non-volatile guest state from the vcpu */
85         VCPU_LOAD_NVGPRS(r4)
87 kvm_start_lightweight:
88         /* Copy registers into shadow vcpu so we can access them in real mode */
89         mr      r3, r4
90         bl      FUNC(kvmppc_copy_to_svcpu)
91         nop
92         REST_GPR(4, r1)
94 #ifdef CONFIG_PPC_BOOK3S_64
95         /* Get the dcbz32 flag */
96         PPC_LL  r3, VCPU_HFLAGS(r4)
97         rldicl  r3, r3, 0, 63           /* r3 &= 1 */
98         stb     r3, HSTATE_RESTORE_HID5(r13)
100         /* Load up guest SPRG3 value, since it's user readable */
101         lwz     r3, VCPU_SHAREDBE(r4)
102         cmpwi   r3, 0
103         ld      r5, VCPU_SHARED(r4)
104         beq     sprg3_little_endian
105 sprg3_big_endian:
106 #ifdef __BIG_ENDIAN__
107         ld      r3, VCPU_SHARED_SPRG3(r5)
108 #else
109         addi    r5, r5, VCPU_SHARED_SPRG3
110         ldbrx   r3, 0, r5
111 #endif
112         b       after_sprg3_load
113 sprg3_little_endian:
114 #ifdef __LITTLE_ENDIAN__
115         ld      r3, VCPU_SHARED_SPRG3(r5)
116 #else
117         addi    r5, r5, VCPU_SHARED_SPRG3
118         ldbrx   r3, 0, r5
119 #endif
121 after_sprg3_load:
122         mtspr   SPRN_SPRG3, r3
123 #endif /* CONFIG_PPC_BOOK3S_64 */
125         PPC_LL  r4, VCPU_SHADOW_MSR(r4) /* get shadow_msr */
127         /* Jump to segment patching handler and into our guest */
128         bl      FUNC(kvmppc_entry_trampoline)
129         nop
132  * This is the handler in module memory. It gets jumped at from the
133  * lowmem trampoline code, so it's basically the guest exit code.
135  */
137         /*
138          * Register usage at this point:
139          *
140          * R1       = host R1
141          * R2       = host R2
142          * R12      = exit handler id
143          * R13      = PACA
144          * SVCPU.*  = guest *
145          * MSR.EE   = 1
146          *
147          */
149         PPC_LL  r3, GPR4(r1)            /* vcpu pointer */
151         /*
152          * kvmppc_copy_from_svcpu can clobber volatile registers, save
153          * the exit handler id to the vcpu and restore it from there later.
154          */
155         stw     r12, VCPU_TRAP(r3)
157         /* Transfer reg values from shadow vcpu back to vcpu struct */
159         bl      FUNC(kvmppc_copy_from_svcpu)
160         nop
162 #ifdef CONFIG_PPC_BOOK3S_64
163         /*
164          * Reload kernel SPRG3 value.
165          * No need to save guest value as usermode can't modify SPRG3.
166          */
167         ld      r3, PACA_SPRG_VDSO(r13)
168         mtspr   SPRN_SPRG_VDSO_WRITE, r3
169 #endif /* CONFIG_PPC_BOOK3S_64 */
171         /* R7 = vcpu */
172         PPC_LL  r7, GPR4(r1)
174         PPC_STL r14, VCPU_GPR(R14)(r7)
175         PPC_STL r15, VCPU_GPR(R15)(r7)
176         PPC_STL r16, VCPU_GPR(R16)(r7)
177         PPC_STL r17, VCPU_GPR(R17)(r7)
178         PPC_STL r18, VCPU_GPR(R18)(r7)
179         PPC_STL r19, VCPU_GPR(R19)(r7)
180         PPC_STL r20, VCPU_GPR(R20)(r7)
181         PPC_STL r21, VCPU_GPR(R21)(r7)
182         PPC_STL r22, VCPU_GPR(R22)(r7)
183         PPC_STL r23, VCPU_GPR(R23)(r7)
184         PPC_STL r24, VCPU_GPR(R24)(r7)
185         PPC_STL r25, VCPU_GPR(R25)(r7)
186         PPC_STL r26, VCPU_GPR(R26)(r7)
187         PPC_STL r27, VCPU_GPR(R27)(r7)
188         PPC_STL r28, VCPU_GPR(R28)(r7)
189         PPC_STL r29, VCPU_GPR(R29)(r7)
190         PPC_STL r30, VCPU_GPR(R30)(r7)
191         PPC_STL r31, VCPU_GPR(R31)(r7)
193         /* Pass the exit number as 3rd argument to kvmppc_handle_exit */
194         lwz     r5, VCPU_TRAP(r7)
196         /* Restore r3 (kvm_run) and r4 (vcpu) */
197         REST_2GPRS(3, r1)
198         bl      FUNC(kvmppc_handle_exit_pr)
200         /* If RESUME_GUEST, get back in the loop */
201         cmpwi   r3, RESUME_GUEST
202         beq     kvm_loop_lightweight
204         cmpwi   r3, RESUME_GUEST_NV
205         beq     kvm_loop_heavyweight
207 kvm_exit_loop:
209         PPC_LL  r4, _LINK(r1)
210         mtlr    r4
212         lwz     r14, _CCR(r1)
213         mtcr    r14
215         /* Restore non-volatile host registers (r14 - r31) */
216         REST_NVGPRS(r1)
218         addi    r1, r1, SWITCH_FRAME_SIZE
219         blr
221 kvm_loop_heavyweight:
223         PPC_LL  r4, _LINK(r1)
224         PPC_STL r4, (PPC_LR_STKOFF + SWITCH_FRAME_SIZE)(r1)
226         /* Load vcpu and cpu_run */
227         REST_2GPRS(3, r1)
229         /* Load non-volatile guest state from the vcpu */
230         VCPU_LOAD_NVGPRS(r4)
232         /* Jump back into the beginning of this function */
233         b       kvm_start_lightweight
235 kvm_loop_lightweight:
237         /* We'll need the vcpu pointer */
238         REST_GPR(4, r1)
240         /* Jump back into the beginning of this function */
241         b       kvm_start_lightweight