1 * Renesas Clock Pulse Generator / Module Standby and Software Reset
3 On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator)
4 and MSSR (Module Standby and Software Reset) blocks are intimately connected,
5 and share the same register block.
7 They provide the following functionalities:
8 - The CPG block generates various core clocks,
9 - The MSSR block provides two functions:
10 1. Module Standby, providing a Clock Domain to control the clock supply
11 to individual SoC devices,
12 2. Reset Control, to perform a software reset of individual SoC devices.
15 - compatible: Must be one of:
16 - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC
18 - reg: Base address and length of the memory resource used by the CPG/MSSR
21 - clocks: References to external parent clocks, one entry for each entry in
23 - clock-names: List of external parent clock names. Valid names are:
27 - #clock-cells: Must be 2
28 - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
29 and a core clock reference, as defined in
30 <dt-bindings/clock/*-cpg-mssr.h>.
31 - For module clocks, the two clock specifier cells must be "CPG_MOD" and
32 a module number, as defined in the datasheet.
34 - #power-domain-cells: Must be 0
35 - SoC devices that are part of the CPG/MSSR Clock Domain and can be
36 power-managed through Module Standby should refer to the CPG device
37 node in their "power-domains" property, as documented by the generic PM
39 Documentation/devicetree/bindings/power/power_domain.txt.
47 cpg: clock-controller@e6150000 {
48 compatible = "renesas,r8a7795-cpg-mssr";
49 reg = <0 0xe6150000 0 0x1000>;
50 clocks = <&extal_clk>, <&extalr_clk>;
51 clock-names = "extal", "extalr";
53 #power-domain-cells = <0>;
57 - CPG/MSSR Clock Domain member device node:
59 scif2: serial@e6e88000 {
60 compatible = "renesas,scif-r8a7795", "renesas,scif";
61 reg = <0 0xe6e88000 0 64>;
62 interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
63 clocks = <&cpg CPG_MOD 310>;
64 clock-names = "sci_ick";
65 dmas = <&dmac1 0x13>, <&dmac1 0x12>;
66 dma-names = "tx", "rx";
67 power-domains = <&cpg>;