drivers/media/i2c/saa711x_regs.h

   1 /* saa711x - Philips SAA711x video decoder register specifications
   2  *
   3  * Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
   4  *
   5  * This program is free software; you can redistribute it and/or
   6  * modify it under the terms of the GNU General Public License
   7  * as published by the Free Software Foundation; either version 2
   8  * of the License, or (at your option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  */
  15
  16 #define R_00_CHIP_VERSION                             0x00
  17 /* Video Decoder */
  18         /* Video Decoder - Frontend part */
  19 #define R_01_INC_DELAY                                0x01
  20 #define R_02_INPUT_CNTL_1                             0x02
  21 #define R_03_INPUT_CNTL_2                             0x03
  22 #define R_04_INPUT_CNTL_3                             0x04
  23 #define R_05_INPUT_CNTL_4                             0x05
  24         /* Video Decoder - Decoder part */
  25 #define R_06_H_SYNC_START                             0x06
  26 #define R_07_H_SYNC_STOP                              0x07
  27 #define R_08_SYNC_CNTL                                0x08
  28 #define R_09_LUMA_CNTL                                0x09
  29 #define R_0A_LUMA_BRIGHT_CNTL                         0x0a
  30 #define R_0B_LUMA_CONTRAST_CNTL                       0x0b
  31 #define R_0C_CHROMA_SAT_CNTL                          0x0c
  32 #define R_0D_CHROMA_HUE_CNTL                          0x0d
  33 #define R_0E_CHROMA_CNTL_1                            0x0e
  34 #define R_0F_CHROMA_GAIN_CNTL                         0x0f
  35 #define R_10_CHROMA_CNTL_2                            0x10
  36 #define R_11_MODE_DELAY_CNTL                          0x11
  37 #define R_12_RT_SIGNAL_CNTL                           0x12
  38 #define R_13_RT_X_PORT_OUT_CNTL                       0x13
  39 #define R_14_ANAL_ADC_COMPAT_CNTL                     0x14
  40 #define R_15_VGATE_START_FID_CHG                      0x15
  41 #define R_16_VGATE_STOP                               0x16
  42 #define R_17_MISC_VGATE_CONF_AND_MSB                  0x17
  43 #define R_18_RAW_DATA_GAIN_CNTL                       0x18
  44 #define R_19_RAW_DATA_OFF_CNTL                        0x19
  45 #define R_1A_COLOR_KILL_LVL_CNTL                      0x1a
  46 #define R_1B_MISC_TVVCRDET                            0x1b
  47 #define R_1C_ENHAN_COMB_CTRL1                         0x1c
  48 #define R_1D_ENHAN_COMB_CTRL2                         0x1d
  49 #define R_1E_STATUS_BYTE_1_VD_DEC                     0x1e
  50 #define R_1F_STATUS_BYTE_2_VD_DEC                     0x1f
  51
  52 /* Component processing and interrupt masking part */
  53 #define R_23_INPUT_CNTL_5                             0x23
  54 #define R_24_INPUT_CNTL_6                             0x24
  55 #define R_25_INPUT_CNTL_7                             0x25
  56 #define R_29_COMP_DELAY                               0x29
  57 #define R_2A_COMP_BRIGHT_CNTL                         0x2a
  58 #define R_2B_COMP_CONTRAST_CNTL                       0x2b
  59 #define R_2C_COMP_SAT_CNTL                            0x2c
  60 #define R_2D_INTERRUPT_MASK_1                         0x2d
  61 #define R_2E_INTERRUPT_MASK_2                         0x2e
  62 #define R_2F_INTERRUPT_MASK_3                         0x2f
  63
  64 /* Audio clock generator part */
  65 #define R_30_AUD_MAST_CLK_CYCLES_PER_FIELD            0x30
  66 #define R_34_AUD_MAST_CLK_NOMINAL_INC                 0x34
  67 #define R_38_CLK_RATIO_AMXCLK_TO_ASCLK                0x38
  68 #define R_39_CLK_RATIO_ASCLK_TO_ALRCLK                0x39
  69 #define R_3A_AUD_CLK_GEN_BASIC_SETUP                  0x3a
  70
  71 /* General purpose VBI data slicer part */
  72 #define R_40_SLICER_CNTL_1                            0x40
  73 #define R_41_LCR_BASE                                 0x41
  74 #define R_58_PROGRAM_FRAMING_CODE                     0x58
  75 #define R_59_H_OFF_FOR_SLICER                         0x59
  76 #define R_5A_V_OFF_FOR_SLICER                         0x5a
  77 #define R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF          0x5b
  78 #define R_5D_DID                                      0x5d
  79 #define R_5E_SDID                                     0x5e
  80 #define R_60_SLICER_STATUS_BYTE_0                     0x60
  81 #define R_61_SLICER_STATUS_BYTE_1                     0x61
  82 #define R_62_SLICER_STATUS_BYTE_2                     0x62
  83
  84 /* X port, I port and the scaler part */
  85         /* Task independent global settings */
  86 #define R_80_GLOBAL_CNTL_1                            0x80
  87 #define R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F    0x81
  88 #define R_83_X_PORT_I_O_ENA_AND_OUT_CLK               0x83
  89 #define R_84_I_PORT_SIGNAL_DEF                        0x84
  90 #define R_85_I_PORT_SIGNAL_POLAR                      0x85
  91 #define R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT          0x86
  92 #define R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED         0x87
  93 #define R_88_POWER_SAVE_ADC_PORT_CNTL                 0x88
  94 #define R_8F_STATUS_INFO_SCALER                       0x8f
  95         /* Task A definition */
  96                 /* Basic settings and acquisition window definition */
  97 #define R_90_A_TASK_HANDLING_CNTL                     0x90
  98 #define R_91_A_X_PORT_FORMATS_AND_CONF                0x91
  99 #define R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL          0x92
 100 #define R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF         0x93
 101 #define R_94_A_HORIZ_INPUT_WINDOW_START               0x94
 102 #define R_95_A_HORIZ_INPUT_WINDOW_START_MSB           0x95
 103 #define R_96_A_HORIZ_INPUT_WINDOW_LENGTH              0x96
 104 #define R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB          0x97
 105 #define R_98_A_VERT_INPUT_WINDOW_START                0x98
 106 #define R_99_A_VERT_INPUT_WINDOW_START_MSB            0x99
 107 #define R_9A_A_VERT_INPUT_WINDOW_LENGTH               0x9a
 108 #define R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB           0x9b
 109 #define R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH             0x9c
 110 #define R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB         0x9d
 111 #define R_9E_A_VERT_OUTPUT_WINDOW_LENGTH              0x9e
 112 #define R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB          0x9f
 113                 /* FIR filtering and prescaling */
 114 #define R_A0_A_HORIZ_PRESCALING                       0xa0
 115 #define R_A1_A_ACCUMULATION_LENGTH                    0xa1
 116 #define R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER    0xa2
 117 #define R_A4_A_LUMA_BRIGHTNESS_CNTL                   0xa4
 118 #define R_A5_A_LUMA_CONTRAST_CNTL                     0xa5
 119 #define R_A6_A_CHROMA_SATURATION_CNTL                 0xa6
 120                 /* Horizontal phase scaling */
 121 #define R_A8_A_HORIZ_LUMA_SCALING_INC                 0xa8
 122 #define R_A9_A_HORIZ_LUMA_SCALING_INC_MSB             0xa9
 123 #define R_AA_A_HORIZ_LUMA_PHASE_OFF                   0xaa
 124 #define R_AC_A_HORIZ_CHROMA_SCALING_INC               0xac
 125 #define R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB           0xad
 126 #define R_AE_A_HORIZ_CHROMA_PHASE_OFF                 0xae
 127 #define R_AF_A_HORIZ_CHROMA_PHASE_OFF_MSB             0xaf
 128                 /* Vertical scaling */
 129 #define R_B0_A_VERT_LUMA_SCALING_INC                  0xb0
 130 #define R_B1_A_VERT_LUMA_SCALING_INC_MSB              0xb1
 131 #define R_B2_A_VERT_CHROMA_SCALING_INC                0xb2
 132 #define R_B3_A_VERT_CHROMA_SCALING_INC_MSB            0xb3
 133 #define R_B4_A_VERT_SCALING_MODE_CNTL                 0xb4
 134 #define R_B8_A_VERT_CHROMA_PHASE_OFF_00               0xb8
 135 #define R_B9_A_VERT_CHROMA_PHASE_OFF_01               0xb9
 136 #define R_BA_A_VERT_CHROMA_PHASE_OFF_10               0xba
 137 #define R_BB_A_VERT_CHROMA_PHASE_OFF_11               0xbb
 138 #define R_BC_A_VERT_LUMA_PHASE_OFF_00                 0xbc
 139 #define R_BD_A_VERT_LUMA_PHASE_OFF_01                 0xbd
 140 #define R_BE_A_VERT_LUMA_PHASE_OFF_10                 0xbe
 141 #define R_BF_A_VERT_LUMA_PHASE_OFF_11                 0xbf
 142         /* Task B definition */
 143                 /* Basic settings and acquisition window definition */
 144 #define R_C0_B_TASK_HANDLING_CNTL                     0xc0
 145 #define R_C1_B_X_PORT_FORMATS_AND_CONF                0xc1
 146 #define R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION      0xc2
 147 #define R_C3_B_I_PORT_FORMATS_AND_CONF                0xc3
 148 #define R_C4_B_HORIZ_INPUT_WINDOW_START               0xc4
 149 #define R_C5_B_HORIZ_INPUT_WINDOW_START_MSB           0xc5
 150 #define R_C6_B_HORIZ_INPUT_WINDOW_LENGTH              0xc6
 151 #define R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB          0xc7
 152 #define R_C8_B_VERT_INPUT_WINDOW_START                0xc8
 153 #define R_C9_B_VERT_INPUT_WINDOW_START_MSB            0xc9
 154 #define R_CA_B_VERT_INPUT_WINDOW_LENGTH               0xca
 155 #define R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB           0xcb
 156 #define R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH             0xcc
 157 #define R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB         0xcd
 158 #define R_CE_B_VERT_OUTPUT_WINDOW_LENGTH              0xce
 159 #define R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB          0xcf
 160                 /* FIR filtering and prescaling */
 161 #define R_D0_B_HORIZ_PRESCALING                       0xd0
 162 #define R_D1_B_ACCUMULATION_LENGTH                    0xd1
 163 #define R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER    0xd2
 164 #define R_D4_B_LUMA_BRIGHTNESS_CNTL                   0xd4
 165 #define R_D5_B_LUMA_CONTRAST_CNTL                     0xd5
 166 #define R_D6_B_CHROMA_SATURATION_CNTL                 0xd6
 167                 /* Horizontal phase scaling */
 168 #define R_D8_B_HORIZ_LUMA_SCALING_INC                 0xd8
 169 #define R_D9_B_HORIZ_LUMA_SCALING_INC_MSB             0xd9
 170 #define R_DA_B_HORIZ_LUMA_PHASE_OFF                   0xda
 171 #define R_DC_B_HORIZ_CHROMA_SCALING                   0xdc
 172 #define R_DD_B_HORIZ_CHROMA_SCALING_MSB               0xdd
 173 #define R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA              0xde
 174                 /* Vertical scaling */
 175 #define R_E0_B_VERT_LUMA_SCALING_INC                  0xe0
 176 #define R_E1_B_VERT_LUMA_SCALING_INC_MSB              0xe1
 177 #define R_E2_B_VERT_CHROMA_SCALING_INC                0xe2
 178 #define R_E3_B_VERT_CHROMA_SCALING_INC_MSB            0xe3
 179 #define R_E4_B_VERT_SCALING_MODE_CNTL                 0xe4
 180 #define R_E8_B_VERT_CHROMA_PHASE_OFF_00               0xe8
 181 #define R_E9_B_VERT_CHROMA_PHASE_OFF_01               0xe9
 182 #define R_EA_B_VERT_CHROMA_PHASE_OFF_10               0xea
 183 #define R_EB_B_VERT_CHROMA_PHASE_OFF_11               0xeb
 184 #define R_EC_B_VERT_LUMA_PHASE_OFF_00                 0xec
 185 #define R_ED_B_VERT_LUMA_PHASE_OFF_01                 0xed
 186 #define R_EE_B_VERT_LUMA_PHASE_OFF_10                 0xee
 187 #define R_EF_B_VERT_LUMA_PHASE_OFF_11                 0xef
 188
 189 /* second PLL (PLL2) and Pulsegenerator Programming */
 190 #define R_F0_LFCO_PER_LINE                            0xf0
 191 #define R_F1_P_I_PARAM_SELECT                         0xf1
 192 #define R_F2_NOMINAL_PLL2_DTO                         0xf2
 193 #define R_F3_PLL_INCREMENT                            0xf3
 194 #define R_F4_PLL2_STATUS                              0xf4
 195 #define R_F5_PULSGEN_LINE_LENGTH                      0xf5
 196 #define R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG      0xf6
 197 #define R_F7_PULSE_A_POS_MSB                          0xf7
 198 #define R_F8_PULSE_B_POS                              0xf8
 199 #define R_F9_PULSE_B_POS_MSB                          0xf9
 200 #define R_FA_PULSE_C_POS                              0xfa
 201 #define R_FB_PULSE_C_POS_MSB                          0xfb
 202 #define R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES     0xff
 203
 204 /* SAA7113 bit-masks */
 205 #define SAA7113_R_08_HTC_OFFSET 3
 206 #define SAA7113_R_08_HTC_MASK (0x3 << SAA7113_R_08_HTC_OFFSET)
 207 #define SAA7113_R_08_FSEL 0x40
 208 #define SAA7113_R_08_AUFD 0x80
 209
 210 #define SAA7113_R_10_VRLN_OFFSET 3
 211 #define SAA7113_R_10_VRLN_MASK (0x1 << SAA7113_R_10_VRLN_OFFSET)
 212 #define SAA7113_R_10_OFTS_OFFSET 6
 213 #define SAA7113_R_10_OFTS_MASK (0x3 << SAA7113_R_10_OFTS_OFFSET)
 214
 215 #define SAA7113_R_12_RTS0_OFFSET 0
 216 #define SAA7113_R_12_RTS0_MASK (0xf << SAA7113_R_12_RTS0_OFFSET)
 217 #define SAA7113_R_12_RTS1_OFFSET 4
 218 #define SAA7113_R_12_RTS1_MASK (0xf << SAA7113_R_12_RTS1_OFFSET)
 219
 220 #define SAA7113_R_13_ADLSB_OFFSET 7
 221 #define SAA7113_R_13_ADLSB_MASK (0x1 << SAA7113_R_13_ADLSB_OFFSET)
 222
 223 #if 0
 224 /* Those structs will be used in the future for debug purposes */
 225 struct saa711x_reg_descr {
 226         u8 reg;
 227         int count;
 228         char *name;
 229 };
 230
 231 struct saa711x_reg_descr saa711x_regs[] = {
 232         /* REG COUNT NAME */
 233         {R_00_CHIP_VERSION,1,
 234          "Chip version"},
 235
 236         /* Video Decoder: R_01_INC_DELAY to R_1F_STATUS_BYTE_2_VD_DEC */
 237
 238         /* Video Decoder - Frontend part: R_01_INC_DELAY to R_05_INPUT_CNTL_4 */
 239         {R_01_INC_DELAY,1,
 240          "Increment delay"},
 241         {R_02_INPUT_CNTL_1,1,
 242          "Analog input control 1"},
 243         {R_03_INPUT_CNTL_2,1,
 244          "Analog input control 2"},
 245         {R_04_INPUT_CNTL_3,1,
 246          "Analog input control 3"},
 247         {R_05_INPUT_CNTL_4,1,
 248          "Analog input control 4"},
 249
 250         /* Video Decoder - Decoder part: R_06_H_SYNC_START to R_1F_STATUS_BYTE_2_VD_DEC */
 251         {R_06_H_SYNC_START,1,
 252          "Horizontal sync start"},
 253         {R_07_H_SYNC_STOP,1,
 254          "Horizontal sync stop"},
 255         {R_08_SYNC_CNTL,1,
 256          "Sync control"},
 257         {R_09_LUMA_CNTL,1,
 258          "Luminance control"},
 259         {R_0A_LUMA_BRIGHT_CNTL,1,
 260          "Luminance brightness control"},
 261         {R_0B_LUMA_CONTRAST_CNTL,1,
 262          "Luminance contrast control"},
 263         {R_0C_CHROMA_SAT_CNTL,1,
 264          "Chrominance saturation control"},
 265         {R_0D_CHROMA_HUE_CNTL,1,
 266          "Chrominance hue control"},
 267         {R_0E_CHROMA_CNTL_1,1,
 268          "Chrominance control 1"},
 269         {R_0F_CHROMA_GAIN_CNTL,1,
 270          "Chrominance gain control"},
 271         {R_10_CHROMA_CNTL_2,1,
 272          "Chrominance control 2"},
 273         {R_11_MODE_DELAY_CNTL,1,
 274          "Mode/delay control"},
 275         {R_12_RT_SIGNAL_CNTL,1,
 276          "RT signal control"},
 277         {R_13_RT_X_PORT_OUT_CNTL,1,
 278          "RT/X port output control"},
 279         {R_14_ANAL_ADC_COMPAT_CNTL,1,
 280          "Analog/ADC/compatibility control"},
 281         {R_15_VGATE_START_FID_CHG,  1,
 282          "VGATE start FID change"},
 283         {R_16_VGATE_STOP,1,
 284          "VGATE stop"},
 285         {R_17_MISC_VGATE_CONF_AND_MSB,  1,
 286          "Miscellaneous VGATE configuration and MSBs"},
 287         {R_18_RAW_DATA_GAIN_CNTL,1,
 288          "Raw data gain control",},
 289         {R_19_RAW_DATA_OFF_CNTL,1,
 290          "Raw data offset control",},
 291         {R_1A_COLOR_KILL_LVL_CNTL,1,
 292          "Color Killer Level Control"},
 293         { R_1B_MISC_TVVCRDET, 1,
 294           "MISC /TVVCRDET"},
 295         { R_1C_ENHAN_COMB_CTRL1, 1,
 296          "Enhanced comb ctrl1"},
 297         { R_1D_ENHAN_COMB_CTRL2, 1,
 298          "Enhanced comb ctrl1"},
 299         {R_1E_STATUS_BYTE_1_VD_DEC,1,
 300          "Status byte 1 video decoder"},
 301         {R_1F_STATUS_BYTE_2_VD_DEC,1,
 302          "Status byte 2 video decoder"},
 303
 304         /* Component processing and interrupt masking part:  0x20h to R_2F_INTERRUPT_MASK_3 */
 305         /* 0x20 to 0x22 - Reserved */
 306         {R_23_INPUT_CNTL_5,1,
 307          "Analog input control 5"},
 308         {R_24_INPUT_CNTL_6,1,
 309          "Analog input control 6"},
 310         {R_25_INPUT_CNTL_7,1,
 311          "Analog input control 7"},
 312         /* 0x26 to 0x28 - Reserved */
 313         {R_29_COMP_DELAY,1,
 314          "Component delay"},
 315         {R_2A_COMP_BRIGHT_CNTL,1,
 316          "Component brightness control"},
 317         {R_2B_COMP_CONTRAST_CNTL,1,
 318          "Component contrast control"},
 319         {R_2C_COMP_SAT_CNTL,1,
 320          "Component saturation control"},
 321         {R_2D_INTERRUPT_MASK_1,1,
 322          "Interrupt mask 1"},
 323         {R_2E_INTERRUPT_MASK_2,1,
 324          "Interrupt mask 2"},
 325         {R_2F_INTERRUPT_MASK_3,1,
 326          "Interrupt mask 3"},
 327
 328         /* Audio clock generator part: R_30_AUD_MAST_CLK_CYCLES_PER_FIELD to 0x3f */
 329         {R_30_AUD_MAST_CLK_CYCLES_PER_FIELD,3,
 330          "Audio master clock cycles per field"},
 331         /* 0x33 - Reserved */
 332         {R_34_AUD_MAST_CLK_NOMINAL_INC,3,
 333          "Audio master clock nominal increment"},
 334         /* 0x37 - Reserved */
 335         {R_38_CLK_RATIO_AMXCLK_TO_ASCLK,1,
 336          "Clock ratio AMXCLK to ASCLK"},
 337         {R_39_CLK_RATIO_ASCLK_TO_ALRCLK,1,
 338          "Clock ratio ASCLK to ALRCLK"},
 339         {R_3A_AUD_CLK_GEN_BASIC_SETUP,1,
 340          "Audio clock generator basic setup"},
 341         /* 0x3b-0x3f - Reserved */
 342
 343         /* General purpose VBI data slicer part: R_40_SLICER_CNTL_1 to 0x7f */
 344         {R_40_SLICER_CNTL_1,1,
 345          "Slicer control 1"},
 346         {R_41_LCR,23,
 347          "R_41_LCR"},
 348         {R_58_PROGRAM_FRAMING_CODE,1,
 349          "Programmable framing code"},
 350         {R_59_H_OFF_FOR_SLICER,1,
 351          "Horizontal offset for slicer"},
 352         {R_5A_V_OFF_FOR_SLICER,1,
 353          "Vertical offset for slicer"},
 354         {R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF,1,
 355          "Field offset and MSBs for horizontal and vertical offset"},
 356         {R_5D_DID,1,
 357          "Header and data identification (R_5D_DID)"},
 358         {R_5E_SDID,1,
 359          "Sliced data identification (R_5E_SDID) code"},
 360         {R_60_SLICER_STATUS_BYTE_0,1,
 361          "Slicer status byte 0"},
 362         {R_61_SLICER_STATUS_BYTE_1,1,
 363          "Slicer status byte 1"},
 364         {R_62_SLICER_STATUS_BYTE_2,1,
 365          "Slicer status byte 2"},
 366         /* 0x63-0x7f - Reserved */
 367
 368         /* X port, I port and the scaler part: R_80_GLOBAL_CNTL_1 to R_EF_B_VERT_LUMA_PHASE_OFF_11 */
 369         /* Task independent global settings: R_80_GLOBAL_CNTL_1 to R_8F_STATUS_INFO_SCALER */
 370         {R_80_GLOBAL_CNTL_1,1,
 371          "Global control 1"},
 372         {R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F,1,
 373          "Vertical sync and Field ID source selection, retimed V and F signals"},
 374         /* 0x82 - Reserved */
 375         {R_83_X_PORT_I_O_ENA_AND_OUT_CLK,1,
 376          "X port I/O enable and output clock"},
 377         {R_84_I_PORT_SIGNAL_DEF,1,
 378          "I port signal definitions"},
 379         {R_85_I_PORT_SIGNAL_POLAR,1,
 380          "I port signal polarities"},
 381         {R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT,1,
 382          "I port FIFO flag control and arbitration"},
 383         {R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED,  1,
 384          "I port I/O enable output clock and gated"},
 385         {R_88_POWER_SAVE_ADC_PORT_CNTL,1,
 386          "Power save/ADC port control"},
 387         /* 089-0x8e - Reserved */
 388         {R_8F_STATUS_INFO_SCALER,1,
 389          "Status information scaler part"},
 390
 391         /* Task A definition: R_90_A_TASK_HANDLING_CNTL to R_BF_A_VERT_LUMA_PHASE_OFF_11 */
 392         /* Task A: Basic settings and acquisition window definition */
 393         {R_90_A_TASK_HANDLING_CNTL,1,
 394          "Task A: Task handling control"},
 395         {R_91_A_X_PORT_FORMATS_AND_CONF,1,
 396          "Task A: X port formats and configuration"},
 397         {R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL,1,
 398          "Task A: X port input reference signal definition"},
 399         {R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF,1,
 400          "Task A: I port output formats and configuration"},
 401         {R_94_A_HORIZ_INPUT_WINDOW_START,2,
 402          "Task A: Horizontal input window start"},
 403         {R_96_A_HORIZ_INPUT_WINDOW_LENGTH,2,
 404          "Task A: Horizontal input window length"},
 405         {R_98_A_VERT_INPUT_WINDOW_START,2,
 406          "Task A: Vertical input window start"},
 407         {R_9A_A_VERT_INPUT_WINDOW_LENGTH,2,
 408          "Task A: Vertical input window length"},
 409         {R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH,2,
 410          "Task A: Horizontal output window length"},
 411         {R_9E_A_VERT_OUTPUT_WINDOW_LENGTH,2,
 412          "Task A: Vertical output window length"},
 413
 414         /* Task A: FIR filtering and prescaling */
 415         {R_A0_A_HORIZ_PRESCALING,1,
 416          "Task A: Horizontal prescaling"},
 417         {R_A1_A_ACCUMULATION_LENGTH,1,
 418          "Task A: Accumulation length"},
 419         {R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1,
 420          "Task A: Prescaler DC gain and FIR prefilter"},
 421         /* 0xa3 - Reserved */
 422         {R_A4_A_LUMA_BRIGHTNESS_CNTL,1,
 423          "Task A: Luminance brightness control"},
 424         {R_A5_A_LUMA_CONTRAST_CNTL,1,
 425          "Task A: Luminance contrast control"},
 426         {R_A6_A_CHROMA_SATURATION_CNTL,1,
 427          "Task A: Chrominance saturation control"},
 428         /* 0xa7 - Reserved */
 429
 430         /* Task A: Horizontal phase scaling */
 431         {R_A8_A_HORIZ_LUMA_SCALING_INC,2,
 432          "Task A: Horizontal luminance scaling increment"},
 433         {R_AA_A_HORIZ_LUMA_PHASE_OFF,1,
 434          "Task A: Horizontal luminance phase offset"},
 435         /* 0xab - Reserved */
 436         {R_AC_A_HORIZ_CHROMA_SCALING_INC,2,
 437          "Task A: Horizontal chrominance scaling increment"},
 438         {R_AE_A_HORIZ_CHROMA_PHASE_OFF,1,
 439          "Task A: Horizontal chrominance phase offset"},
 440         /* 0xaf - Reserved */
 441
 442         /* Task A: Vertical scaling */
 443         {R_B0_A_VERT_LUMA_SCALING_INC,2,
 444          "Task A: Vertical luminance scaling increment"},
 445         {R_B2_A_VERT_CHROMA_SCALING_INC,2,
 446          "Task A: Vertical chrominance scaling increment"},
 447         {R_B4_A_VERT_SCALING_MODE_CNTL,1,
 448          "Task A: Vertical scaling mode control"},
 449         /* 0xb5-0xb7 - Reserved */
 450         {R_B8_A_VERT_CHROMA_PHASE_OFF_00,1,
 451          "Task A: Vertical chrominance phase offset '00'"},
 452         {R_B9_A_VERT_CHROMA_PHASE_OFF_01,1,
 453          "Task A: Vertical chrominance phase offset '01'"},
 454         {R_BA_A_VERT_CHROMA_PHASE_OFF_10,1,
 455          "Task A: Vertical chrominance phase offset '10'"},
 456         {R_BB_A_VERT_CHROMA_PHASE_OFF_11,1,
 457          "Task A: Vertical chrominance phase offset '11'"},
 458         {R_BC_A_VERT_LUMA_PHASE_OFF_00,1,
 459          "Task A: Vertical luminance phase offset '00'"},
 460         {R_BD_A_VERT_LUMA_PHASE_OFF_01,1,
 461          "Task A: Vertical luminance phase offset '01'"},
 462         {R_BE_A_VERT_LUMA_PHASE_OFF_10,1,
 463          "Task A: Vertical luminance phase offset '10'"},
 464         {R_BF_A_VERT_LUMA_PHASE_OFF_11,1,
 465          "Task A: Vertical luminance phase offset '11'"},
 466
 467         /* Task B definition: R_C0_B_TASK_HANDLING_CNTL to R_EF_B_VERT_LUMA_PHASE_OFF_11 */
 468         /* Task B: Basic settings and acquisition window definition */
 469         {R_C0_B_TASK_HANDLING_CNTL,1,
 470          "Task B: Task handling control"},
 471         {R_C1_B_X_PORT_FORMATS_AND_CONF,1,
 472          "Task B: X port formats and configuration"},
 473         {R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION,1,
 474          "Task B: Input reference signal definition"},
 475         {R_C3_B_I_PORT_FORMATS_AND_CONF,1,
 476          "Task B: I port formats and configuration"},
 477         {R_C4_B_HORIZ_INPUT_WINDOW_START,2,
 478          "Task B: Horizontal input window start"},
 479         {R_C6_B_HORIZ_INPUT_WINDOW_LENGTH,2,
 480          "Task B: Horizontal input window length"},
 481         {R_C8_B_VERT_INPUT_WINDOW_START,2,
 482          "Task B: Vertical input window start"},
 483         {R_CA_B_VERT_INPUT_WINDOW_LENGTH,2,
 484          "Task B: Vertical input window length"},
 485         {R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH,2,
 486          "Task B: Horizontal output window length"},
 487         {R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,2,
 488          "Task B: Vertical output window length"},
 489
 490         /* Task B: FIR filtering and prescaling */
 491         {R_D0_B_HORIZ_PRESCALING,1,
 492          "Task B: Horizontal prescaling"},
 493         {R_D1_B_ACCUMULATION_LENGTH,1,
 494          "Task B: Accumulation length"},
 495         {R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1,
 496          "Task B: Prescaler DC gain and FIR prefilter"},
 497         /* 0xd3 - Reserved */
 498         {R_D4_B_LUMA_BRIGHTNESS_CNTL,1,
 499          "Task B: Luminance brightness control"},
 500         {R_D5_B_LUMA_CONTRAST_CNTL,1,
 501          "Task B: Luminance contrast control"},
 502         {R_D6_B_CHROMA_SATURATION_CNTL,1,
 503          "Task B: Chrominance saturation control"},
 504         /* 0xd7 - Reserved */
 505
 506         /* Task B: Horizontal phase scaling */
 507         {R_D8_B_HORIZ_LUMA_SCALING_INC,2,
 508          "Task B: Horizontal luminance scaling increment"},
 509         {R_DA_B_HORIZ_LUMA_PHASE_OFF,1,
 510          "Task B: Horizontal luminance phase offset"},
 511         /* 0xdb - Reserved */
 512         {R_DC_B_HORIZ_CHROMA_SCALING,2,
 513          "Task B: Horizontal chrominance scaling"},
 514         {R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA,1,
 515          "Task B: Horizontal Phase Offset Chroma"},
 516         /* 0xdf - Reserved */
 517
 518         /* Task B: Vertical scaling */
 519         {R_E0_B_VERT_LUMA_SCALING_INC,2,
 520          "Task B: Vertical luminance scaling increment"},
 521         {R_E2_B_VERT_CHROMA_SCALING_INC,2,
 522          "Task B: Vertical chrominance scaling increment"},
 523         {R_E4_B_VERT_SCALING_MODE_CNTL,1,
 524          "Task B: Vertical scaling mode control"},
 525         /* 0xe5-0xe7 - Reserved */
 526         {R_E8_B_VERT_CHROMA_PHASE_OFF_00,1,
 527          "Task B: Vertical chrominance phase offset '00'"},
 528         {R_E9_B_VERT_CHROMA_PHASE_OFF_01,1,
 529          "Task B: Vertical chrominance phase offset '01'"},
 530         {R_EA_B_VERT_CHROMA_PHASE_OFF_10,1,
 531          "Task B: Vertical chrominance phase offset '10'"},
 532         {R_EB_B_VERT_CHROMA_PHASE_OFF_11,1,
 533          "Task B: Vertical chrominance phase offset '11'"},
 534         {R_EC_B_VERT_LUMA_PHASE_OFF_00,1,
 535          "Task B: Vertical luminance phase offset '00'"},
 536         {R_ED_B_VERT_LUMA_PHASE_OFF_01,1,
 537          "Task B: Vertical luminance phase offset '01'"},
 538         {R_EE_B_VERT_LUMA_PHASE_OFF_10,1,
 539          "Task B: Vertical luminance phase offset '10'"},
 540         {R_EF_B_VERT_LUMA_PHASE_OFF_11,1,
 541          "Task B: Vertical luminance phase offset '11'"},
 542
 543         /* second PLL (PLL2) and Pulsegenerator Programming */
 544         { R_F0_LFCO_PER_LINE, 1,
 545           "LFCO's per line"},
 546         { R_F1_P_I_PARAM_SELECT,1,
 547           "P-/I- Param. Select., PLL Mode, PLL H-Src., LFCO's per line"},
 548         { R_F2_NOMINAL_PLL2_DTO,1,
 549          "Nominal PLL2 DTO"},
 550         {R_F3_PLL_INCREMENT,1,
 551          "PLL2 Increment"},
 552         {R_F4_PLL2_STATUS,1,
 553          "PLL2 Status"},
 554         {R_F5_PULSGEN_LINE_LENGTH,1,
 555          "Pulsgen. line length"},
 556         {R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG,1,
 557          "Pulse A Position, Pulsgen Resync., Pulsgen. H-Src., Pulsgen. line length"},
 558         {R_F7_PULSE_A_POS_MSB,1,
 559          "Pulse A Position"},
 560         {R_F8_PULSE_B_POS,2,
 561          "Pulse B Position"},
 562         {R_FA_PULSE_C_POS,2,
 563          "Pulse C Position"},
 564         /* 0xfc to 0xfe - Reserved */
 565         {R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES,1,
 566          "S_PLL max. phase, error threshold, PLL2 no. of lines, threshold"},
 567 };
 568 #endif