2 * Linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
3 * flexcop-pci.c - covers the PCI part including DMA transfers
4 * see flexcop.c for copyright information
7 #define FC_LOG_PREFIX "flexcop-pci"
8 #include "flexcop-common.h"
10 static int enable_pid_filtering
= 1;
11 module_param(enable_pid_filtering
, int, 0444);
12 MODULE_PARM_DESC(enable_pid_filtering
,
13 "enable hardware pid filtering: supported values: 0 (fullts), 1");
15 static int irq_chk_intv
= 100;
16 module_param(irq_chk_intv
, int, 0644);
17 MODULE_PARM_DESC(irq_chk_intv
, "set the interval for IRQ streaming watchdog.");
19 #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
20 #define dprintk(level,args...) \
21 do { if ((debug & level)) printk(args); } while (0)
24 #define dprintk(level,args...)
25 #define DEBSTATUS " (debugging is not enabled)"
28 #define deb_info(args...) dprintk(0x01, args)
29 #define deb_reg(args...) dprintk(0x02, args)
30 #define deb_ts(args...) dprintk(0x04, args)
31 #define deb_irq(args...) dprintk(0x08, args)
32 #define deb_chk(args...) dprintk(0x10, args)
35 module_param(debug
, int, 0644);
36 MODULE_PARM_DESC(debug
,
37 "set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))."
40 #define DRIVER_VERSION "0.1"
41 #define DRIVER_NAME "flexcop-pci"
42 #define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@posteo.de>"
47 #define FC_PCI_INIT 0x01
48 #define FC_PCI_DMA_INIT 0x02
53 /* buffersize (at least for DMA1, need to be % 188 == 0,
54 * this logic is required */
55 #define FC_DEFAULT_DMA1_BUFSIZE (1280 * 188)
56 #define FC_DEFAULT_DMA2_BUFSIZE (10 * 188)
57 struct flexcop_dma dma
[2];
59 int active_dma1_addr
; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
60 u32 last_dma1_cur_pos
;
61 /* position of the pointer last time the timer/packet irq occurred */
67 unsigned long last_irq
;
69 struct delayed_work irq_check_work
;
70 struct flexcop_device
*fc_dev
;
73 static int lastwreg
, lastwval
, lastrreg
, lastrval
;
75 static flexcop_ibi_value
flexcop_pci_read_ibi_reg(struct flexcop_device
*fc
,
76 flexcop_ibi_register r
)
78 struct flexcop_pci
*fc_pci
= fc
->bus_specific
;
80 v
.raw
= readl(fc_pci
->io_mem
+ r
);
82 if (lastrreg
!= r
|| lastrval
!= v
.raw
) {
83 lastrreg
= r
; lastrval
= v
.raw
;
84 deb_reg("new rd: %3x: %08x\n", r
, v
.raw
);
90 static int flexcop_pci_write_ibi_reg(struct flexcop_device
*fc
,
91 flexcop_ibi_register r
, flexcop_ibi_value v
)
93 struct flexcop_pci
*fc_pci
= fc
->bus_specific
;
95 if (lastwreg
!= r
|| lastwval
!= v
.raw
) {
96 lastwreg
= r
; lastwval
= v
.raw
;
97 deb_reg("new wr: %3x: %08x\n", r
, v
.raw
);
100 writel(v
.raw
, fc_pci
->io_mem
+ r
);
104 static void flexcop_pci_irq_check_work(struct work_struct
*work
)
106 struct flexcop_pci
*fc_pci
=
107 container_of(work
, struct flexcop_pci
, irq_check_work
.work
);
108 struct flexcop_device
*fc
= fc_pci
->fc_dev
;
112 if (fc_pci
->count
== fc_pci
->count_prev
) {
113 deb_chk("no IRQ since the last check\n");
114 if (fc_pci
->stream_problem
++ == 3) {
115 struct dvb_demux_feed
*feed
;
116 deb_info("flexcop-pci: stream problem, resetting pid filter\n");
118 spin_lock_irq(&fc
->demux
.lock
);
119 list_for_each_entry(feed
, &fc
->demux
.feed_list
,
121 flexcop_pid_feed_control(fc
, feed
, 0);
124 list_for_each_entry(feed
, &fc
->demux
.feed_list
,
126 flexcop_pid_feed_control(fc
, feed
, 1);
128 spin_unlock_irq(&fc
->demux
.lock
);
130 fc_pci
->stream_problem
= 0;
133 fc_pci
->stream_problem
= 0;
134 fc_pci
->count_prev
= fc_pci
->count
;
138 schedule_delayed_work(&fc_pci
->irq_check_work
,
139 msecs_to_jiffies(irq_chk_intv
< 100 ? 100 : irq_chk_intv
));
142 /* When PID filtering is turned on, we use the timer IRQ, because small amounts
143 * of data need to be passed to the user space instantly as well. When PID
144 * filtering is turned off, we use the page-change-IRQ */
145 static irqreturn_t
flexcop_pci_isr(int irq
, void *dev_id
)
147 struct flexcop_pci
*fc_pci
= dev_id
;
148 struct flexcop_device
*fc
= fc_pci
->fc_dev
;
151 irqreturn_t ret
= IRQ_HANDLED
;
153 spin_lock_irqsave(&fc_pci
->irq_lock
, flags
);
154 v
= fc
->read_ibi_reg(fc
, irq_20c
);
157 if (v
.irq_20c
.Data_receiver_error
)
158 deb_chk("data receiver error\n");
159 if (v
.irq_20c
.Continuity_error_flag
)
160 deb_chk("Contunuity error flag is set\n");
161 if (v
.irq_20c
.LLC_SNAP_FLAG_set
)
162 deb_chk("LLC_SNAP_FLAG_set is set\n");
163 if (v
.irq_20c
.Transport_Error
)
164 deb_chk("Transport error\n");
166 if ((fc_pci
->count
% 1000) == 0)
167 deb_chk("%d valid irq took place so far\n", fc_pci
->count
);
169 if (v
.irq_20c
.DMA1_IRQ_Status
== 1) {
170 if (fc_pci
->active_dma1_addr
== 0)
171 flexcop_pass_dmx_packets(fc_pci
->fc_dev
,
172 fc_pci
->dma
[0].cpu_addr0
,
173 fc_pci
->dma
[0].size
/ 188);
175 flexcop_pass_dmx_packets(fc_pci
->fc_dev
,
176 fc_pci
->dma
[0].cpu_addr1
,
177 fc_pci
->dma
[0].size
/ 188);
179 deb_irq("page change to page: %d\n",!fc_pci
->active_dma1_addr
);
180 fc_pci
->active_dma1_addr
= !fc_pci
->active_dma1_addr
;
181 /* for the timer IRQ we only can use buffer dmx feeding, because we don't have
182 * complete TS packets when reading from the DMA memory */
183 } else if (v
.irq_20c
.DMA1_Timer_Status
== 1) {
184 dma_addr_t cur_addr
=
185 fc
->read_ibi_reg(fc
,dma1_008
).dma_0x8
.dma_cur_addr
<< 2;
186 u32 cur_pos
= cur_addr
- fc_pci
->dma
[0].dma_addr0
;
188 deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, last_cur_pos: %08x ",
189 jiffies_to_usecs(jiffies
- fc_pci
->last_irq
),
190 v
.raw
, (unsigned long long)cur_addr
, cur_pos
,
191 fc_pci
->last_dma1_cur_pos
);
192 fc_pci
->last_irq
= jiffies
;
194 /* buffer end was reached, restarted from the beginning
195 * pass the data from last_cur_pos to the buffer end to the demux
197 if (cur_pos
< fc_pci
->last_dma1_cur_pos
) {
198 deb_irq(" end was reached: passing %d bytes ",
199 (fc_pci
->dma
[0].size
*2 - 1) -
200 fc_pci
->last_dma1_cur_pos
);
201 flexcop_pass_dmx_data(fc_pci
->fc_dev
,
202 fc_pci
->dma
[0].cpu_addr0
+
203 fc_pci
->last_dma1_cur_pos
,
204 (fc_pci
->dma
[0].size
*2) -
205 fc_pci
->last_dma1_cur_pos
);
206 fc_pci
->last_dma1_cur_pos
= 0;
209 if (cur_pos
> fc_pci
->last_dma1_cur_pos
) {
210 deb_irq(" passing %d bytes ",
211 cur_pos
- fc_pci
->last_dma1_cur_pos
);
212 flexcop_pass_dmx_data(fc_pci
->fc_dev
,
213 fc_pci
->dma
[0].cpu_addr0
+
214 fc_pci
->last_dma1_cur_pos
,
215 cur_pos
- fc_pci
->last_dma1_cur_pos
);
219 fc_pci
->last_dma1_cur_pos
= cur_pos
;
222 deb_irq("isr for flexcop called, apparently without reason (%08x)\n",
227 spin_unlock_irqrestore(&fc_pci
->irq_lock
, flags
);
231 static int flexcop_pci_stream_control(struct flexcop_device
*fc
, int onoff
)
233 struct flexcop_pci
*fc_pci
= fc
->bus_specific
;
235 flexcop_dma_config(fc
, &fc_pci
->dma
[0], FC_DMA_1
);
236 flexcop_dma_config(fc
, &fc_pci
->dma
[1], FC_DMA_2
);
237 flexcop_dma_config_timer(fc
, FC_DMA_1
, 0);
238 flexcop_dma_xfer_control(fc
, FC_DMA_1
,
239 FC_DMA_SUBADDR_0
| FC_DMA_SUBADDR_1
, 1);
240 deb_irq("DMA xfer enabled\n");
242 fc_pci
->last_dma1_cur_pos
= 0;
243 flexcop_dma_control_timer_irq(fc
, FC_DMA_1
, 1);
244 deb_irq("IRQ enabled\n");
245 fc_pci
->count_prev
= fc_pci
->count
;
247 flexcop_dma_control_timer_irq(fc
, FC_DMA_1
, 0);
248 deb_irq("IRQ disabled\n");
250 flexcop_dma_xfer_control(fc
, FC_DMA_1
,
251 FC_DMA_SUBADDR_0
| FC_DMA_SUBADDR_1
, 0);
252 deb_irq("DMA xfer disabled\n");
257 static int flexcop_pci_dma_init(struct flexcop_pci
*fc_pci
)
260 ret
= flexcop_dma_allocate(fc_pci
->pdev
, &fc_pci
->dma
[0],
261 FC_DEFAULT_DMA1_BUFSIZE
);
265 ret
= flexcop_dma_allocate(fc_pci
->pdev
, &fc_pci
->dma
[1],
266 FC_DEFAULT_DMA2_BUFSIZE
);
268 flexcop_dma_free(&fc_pci
->dma
[0]);
272 flexcop_sram_set_dest(fc_pci
->fc_dev
, FC_SRAM_DEST_MEDIA
|
273 FC_SRAM_DEST_NET
, FC_SRAM_DEST_TARGET_DMA1
);
274 flexcop_sram_set_dest(fc_pci
->fc_dev
, FC_SRAM_DEST_CAO
|
275 FC_SRAM_DEST_CAI
, FC_SRAM_DEST_TARGET_DMA2
);
276 fc_pci
->init_state
|= FC_PCI_DMA_INIT
;
280 static void flexcop_pci_dma_exit(struct flexcop_pci
*fc_pci
)
282 if (fc_pci
->init_state
& FC_PCI_DMA_INIT
) {
283 flexcop_dma_free(&fc_pci
->dma
[0]);
284 flexcop_dma_free(&fc_pci
->dma
[1]);
286 fc_pci
->init_state
&= ~FC_PCI_DMA_INIT
;
289 static int flexcop_pci_init(struct flexcop_pci
*fc_pci
)
293 info("card revision %x", fc_pci
->pdev
->revision
);
295 if ((ret
= pci_enable_device(fc_pci
->pdev
)) != 0)
297 pci_set_master(fc_pci
->pdev
);
299 if ((ret
= pci_request_regions(fc_pci
->pdev
, DRIVER_NAME
)) != 0)
300 goto err_pci_disable_device
;
302 fc_pci
->io_mem
= pci_iomap(fc_pci
->pdev
, 0, 0x800);
304 if (!fc_pci
->io_mem
) {
305 err("cannot map io memory\n");
307 goto err_pci_release_regions
;
310 pci_set_drvdata(fc_pci
->pdev
, fc_pci
);
311 spin_lock_init(&fc_pci
->irq_lock
);
312 if ((ret
= request_irq(fc_pci
->pdev
->irq
, flexcop_pci_isr
,
313 IRQF_SHARED
, DRIVER_NAME
, fc_pci
)) != 0)
314 goto err_pci_iounmap
;
316 fc_pci
->init_state
|= FC_PCI_INIT
;
320 pci_iounmap(fc_pci
->pdev
, fc_pci
->io_mem
);
321 err_pci_release_regions
:
322 pci_release_regions(fc_pci
->pdev
);
323 err_pci_disable_device
:
324 pci_disable_device(fc_pci
->pdev
);
328 static void flexcop_pci_exit(struct flexcop_pci
*fc_pci
)
330 if (fc_pci
->init_state
& FC_PCI_INIT
) {
331 free_irq(fc_pci
->pdev
->irq
, fc_pci
);
332 pci_iounmap(fc_pci
->pdev
, fc_pci
->io_mem
);
333 pci_release_regions(fc_pci
->pdev
);
334 pci_disable_device(fc_pci
->pdev
);
336 fc_pci
->init_state
&= ~FC_PCI_INIT
;
339 static int flexcop_pci_probe(struct pci_dev
*pdev
,
340 const struct pci_device_id
*ent
)
342 struct flexcop_device
*fc
;
343 struct flexcop_pci
*fc_pci
;
346 if ((fc
= flexcop_device_kmalloc(sizeof(struct flexcop_pci
))) == NULL
) {
347 err("out of memory\n");
351 /* general flexcop init */
352 fc_pci
= fc
->bus_specific
;
355 fc
->read_ibi_reg
= flexcop_pci_read_ibi_reg
;
356 fc
->write_ibi_reg
= flexcop_pci_write_ibi_reg
;
357 fc
->i2c_request
= flexcop_i2c_request
;
358 fc
->get_mac_addr
= flexcop_eeprom_check_mac_addr
;
359 fc
->stream_control
= flexcop_pci_stream_control
;
361 if (enable_pid_filtering
)
362 info("will use the HW PID filter.");
364 info("will pass the complete TS to the demuxer.");
366 fc
->pid_filtering
= enable_pid_filtering
;
367 fc
->bus_type
= FC_PCI
;
368 fc
->dev
= &pdev
->dev
;
369 fc
->owner
= THIS_MODULE
;
371 /* bus specific part */
373 if ((ret
= flexcop_pci_init(fc_pci
)) != 0)
377 if ((ret
= flexcop_device_initialize(fc
)) != 0)
381 if ((ret
= flexcop_pci_dma_init(fc_pci
)) != 0)
384 INIT_DELAYED_WORK(&fc_pci
->irq_check_work
, flexcop_pci_irq_check_work
);
386 if (irq_chk_intv
> 0)
387 schedule_delayed_work(&fc_pci
->irq_check_work
,
388 msecs_to_jiffies(irq_chk_intv
< 100 ?
394 flexcop_device_exit(fc
);
396 flexcop_pci_exit(fc_pci
);
398 flexcop_device_kfree(fc
);
402 /* in theory every _exit function should be called exactly two times,
403 * here and in the bail-out-part of the _init-function
405 static void flexcop_pci_remove(struct pci_dev
*pdev
)
407 struct flexcop_pci
*fc_pci
= pci_get_drvdata(pdev
);
409 if (irq_chk_intv
> 0)
410 cancel_delayed_work(&fc_pci
->irq_check_work
);
412 flexcop_pci_dma_exit(fc_pci
);
413 flexcop_device_exit(fc_pci
->fc_dev
);
414 flexcop_pci_exit(fc_pci
);
415 flexcop_device_kfree(fc_pci
->fc_dev
);
418 static struct pci_device_id flexcop_pci_tbl
[] = {
419 { PCI_DEVICE(0x13d0, 0x2103) },
423 MODULE_DEVICE_TABLE(pci
, flexcop_pci_tbl
);
425 static struct pci_driver flexcop_pci_driver
= {
426 .name
= "b2c2_flexcop_pci",
427 .id_table
= flexcop_pci_tbl
,
428 .probe
= flexcop_pci_probe
,
429 .remove
= flexcop_pci_remove
,
432 module_pci_driver(flexcop_pci_driver
);
434 MODULE_AUTHOR(DRIVER_AUTHOR
);
435 MODULE_DESCRIPTION(DRIVER_NAME
);
436 MODULE_LICENSE("GPL");