2 * Copyright (c) 2008, 2009 open80211s Ltd.
3 * Authors: Luis Carlos Cobo <luisca@cozybit.com>
4 * Javier Cardona <javier@cozybit.com>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
11 #include <linux/slab.h>
12 #include <asm/unaligned.h>
13 #include "ieee80211_i.h"
15 #include "driver-ops.h"
17 static int mesh_allocated
;
18 static struct kmem_cache
*rm_cache
;
20 bool mesh_action_is_path_sel(struct ieee80211_mgmt
*mgmt
)
22 return (mgmt
->u
.action
.u
.mesh_action
.action_code
==
23 WLAN_MESH_ACTION_HWMP_PATH_SELECTION
);
26 void ieee80211s_init(void)
29 rm_cache
= kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry
),
33 void ieee80211s_stop(void)
37 kmem_cache_destroy(rm_cache
);
40 static void ieee80211_mesh_housekeeping_timer(unsigned long data
)
42 struct ieee80211_sub_if_data
*sdata
= (void *) data
;
43 struct ieee80211_local
*local
= sdata
->local
;
44 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
46 set_bit(MESH_WORK_HOUSEKEEPING
, &ifmsh
->wrkq_flags
);
48 ieee80211_queue_work(&local
->hw
, &sdata
->work
);
52 * mesh_matches_local - check if the config of a mesh point matches ours
54 * @sdata: local mesh subif
55 * @ie: information elements of a management frame from the mesh peer
57 * This function checks if the mesh configuration of a mesh point matches the
58 * local mesh configuration, i.e. if both nodes belong to the same mesh network.
60 bool mesh_matches_local(struct ieee80211_sub_if_data
*sdata
,
61 struct ieee802_11_elems
*ie
)
63 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
65 struct cfg80211_chan_def sta_chan_def
;
66 struct ieee80211_supported_band
*sband
;
69 * As support for each feature is added, check for matching
70 * - On mesh config capabilities
71 * - Power Save Support En
72 * - Sync support enabled
73 * - Sync support active
74 * - Sync support required from peer
76 * - Power management control on fc
78 if (!(ifmsh
->mesh_id_len
== ie
->mesh_id_len
&&
79 memcmp(ifmsh
->mesh_id
, ie
->mesh_id
, ie
->mesh_id_len
) == 0 &&
80 (ifmsh
->mesh_pp_id
== ie
->mesh_config
->meshconf_psel
) &&
81 (ifmsh
->mesh_pm_id
== ie
->mesh_config
->meshconf_pmetric
) &&
82 (ifmsh
->mesh_cc_id
== ie
->mesh_config
->meshconf_congest
) &&
83 (ifmsh
->mesh_sp_id
== ie
->mesh_config
->meshconf_synch
) &&
84 (ifmsh
->mesh_auth_id
== ie
->mesh_config
->meshconf_auth
)))
87 sband
= ieee80211_get_sband(sdata
);
91 ieee80211_sta_get_rates(sdata
, ie
, sband
->band
,
94 if (sdata
->vif
.bss_conf
.basic_rates
!= basic_rates
)
97 cfg80211_chandef_create(&sta_chan_def
, sdata
->vif
.bss_conf
.chandef
.chan
,
99 ieee80211_chandef_ht_oper(ie
->ht_operation
, &sta_chan_def
);
100 ieee80211_chandef_vht_oper(ie
->vht_operation
, &sta_chan_def
);
102 if (!cfg80211_chandef_compatible(&sdata
->vif
.bss_conf
.chandef
,
110 * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links
112 * @ie: information elements of a management frame from the mesh peer
114 bool mesh_peer_accepts_plinks(struct ieee802_11_elems
*ie
)
116 return (ie
->mesh_config
->meshconf_cap
&
117 IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS
) != 0;
121 * mesh_accept_plinks_update - update accepting_plink in local mesh beacons
123 * @sdata: mesh interface in which mesh beacons are going to be updated
125 * Returns: beacon changed flag if the beacon content changed.
127 u32
mesh_accept_plinks_update(struct ieee80211_sub_if_data
*sdata
)
132 /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0,
133 * the mesh interface might be able to establish plinks with peers that
134 * are already on the table but are not on PLINK_ESTAB state. However,
135 * in general the mesh interface is not accepting peer link requests
136 * from new peers, and that must be reflected in the beacon
138 free_plinks
= mesh_plink_availables(sdata
);
140 if (free_plinks
!= sdata
->u
.mesh
.accepting_plinks
) {
141 sdata
->u
.mesh
.accepting_plinks
= free_plinks
;
142 changed
= BSS_CHANGED_BEACON
;
149 * mesh_sta_cleanup - clean up any mesh sta state
151 * @sta: mesh sta to clean up.
153 void mesh_sta_cleanup(struct sta_info
*sta
)
155 struct ieee80211_sub_if_data
*sdata
= sta
->sdata
;
156 u32 changed
= mesh_plink_deactivate(sta
);
159 ieee80211_mbss_info_change_notify(sdata
, changed
);
162 int mesh_rmc_init(struct ieee80211_sub_if_data
*sdata
)
166 sdata
->u
.mesh
.rmc
= kmalloc(sizeof(struct mesh_rmc
), GFP_KERNEL
);
167 if (!sdata
->u
.mesh
.rmc
)
169 sdata
->u
.mesh
.rmc
->idx_mask
= RMC_BUCKETS
- 1;
170 for (i
= 0; i
< RMC_BUCKETS
; i
++)
171 INIT_HLIST_HEAD(&sdata
->u
.mesh
.rmc
->bucket
[i
]);
175 void mesh_rmc_free(struct ieee80211_sub_if_data
*sdata
)
177 struct mesh_rmc
*rmc
= sdata
->u
.mesh
.rmc
;
179 struct hlist_node
*n
;
182 if (!sdata
->u
.mesh
.rmc
)
185 for (i
= 0; i
< RMC_BUCKETS
; i
++) {
186 hlist_for_each_entry_safe(p
, n
, &rmc
->bucket
[i
], list
) {
188 kmem_cache_free(rm_cache
, p
);
193 sdata
->u
.mesh
.rmc
= NULL
;
197 * mesh_rmc_check - Check frame in recent multicast cache and add if absent.
200 * @sa: source address
201 * @mesh_hdr: mesh_header
203 * Returns: 0 if the frame is not in the cache, nonzero otherwise.
205 * Checks using the source address and the mesh sequence number if we have
206 * received this frame lately. If the frame is not in the cache, it is added to
209 int mesh_rmc_check(struct ieee80211_sub_if_data
*sdata
,
210 const u8
*sa
, struct ieee80211s_hdr
*mesh_hdr
)
212 struct mesh_rmc
*rmc
= sdata
->u
.mesh
.rmc
;
217 struct hlist_node
*n
;
222 /* Don't care about endianness since only match matters */
223 memcpy(&seqnum
, &mesh_hdr
->seqnum
, sizeof(mesh_hdr
->seqnum
));
224 idx
= le32_to_cpu(mesh_hdr
->seqnum
) & rmc
->idx_mask
;
225 hlist_for_each_entry_safe(p
, n
, &rmc
->bucket
[idx
], list
) {
227 if (time_after(jiffies
, p
->exp_time
) ||
228 entries
== RMC_QUEUE_MAX_LEN
) {
230 kmem_cache_free(rm_cache
, p
);
232 } else if ((seqnum
== p
->seqnum
) && ether_addr_equal(sa
, p
->sa
))
236 p
= kmem_cache_alloc(rm_cache
, GFP_ATOMIC
);
241 p
->exp_time
= jiffies
+ RMC_TIMEOUT
;
242 memcpy(p
->sa
, sa
, ETH_ALEN
);
243 hlist_add_head(&p
->list
, &rmc
->bucket
[idx
]);
247 int mesh_add_meshconf_ie(struct ieee80211_sub_if_data
*sdata
,
250 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
252 u8 meshconf_len
= sizeof(struct ieee80211_meshconf_ie
);
254 if (skb_tailroom(skb
) < 2 + meshconf_len
)
257 pos
= skb_put(skb
, 2 + meshconf_len
);
258 *pos
++ = WLAN_EID_MESH_CONFIG
;
259 *pos
++ = meshconf_len
;
261 /* save a pointer for quick updates in pre-tbtt */
262 ifmsh
->meshconf_offset
= pos
- skb
->data
;
264 /* Active path selection protocol ID */
265 *pos
++ = ifmsh
->mesh_pp_id
;
266 /* Active path selection metric ID */
267 *pos
++ = ifmsh
->mesh_pm_id
;
268 /* Congestion control mode identifier */
269 *pos
++ = ifmsh
->mesh_cc_id
;
270 /* Synchronization protocol identifier */
271 *pos
++ = ifmsh
->mesh_sp_id
;
272 /* Authentication Protocol identifier */
273 *pos
++ = ifmsh
->mesh_auth_id
;
274 /* Mesh Formation Info - number of neighbors */
275 neighbors
= atomic_read(&ifmsh
->estab_plinks
);
276 neighbors
= min_t(int, neighbors
, IEEE80211_MAX_MESH_PEERINGS
);
277 *pos
++ = neighbors
<< 1;
278 /* Mesh capability */
280 *pos
|= ifmsh
->mshcfg
.dot11MeshForwarding
?
281 IEEE80211_MESHCONF_CAPAB_FORWARDING
: 0x00;
282 *pos
|= ifmsh
->accepting_plinks
?
283 IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS
: 0x00;
284 /* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */
285 *pos
|= ifmsh
->ps_peers_deep_sleep
?
286 IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL
: 0x00;
290 int mesh_add_meshid_ie(struct ieee80211_sub_if_data
*sdata
, struct sk_buff
*skb
)
292 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
295 if (skb_tailroom(skb
) < 2 + ifmsh
->mesh_id_len
)
298 pos
= skb_put(skb
, 2 + ifmsh
->mesh_id_len
);
299 *pos
++ = WLAN_EID_MESH_ID
;
300 *pos
++ = ifmsh
->mesh_id_len
;
301 if (ifmsh
->mesh_id_len
)
302 memcpy(pos
, ifmsh
->mesh_id
, ifmsh
->mesh_id_len
);
307 static int mesh_add_awake_window_ie(struct ieee80211_sub_if_data
*sdata
,
310 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
313 /* see IEEE802.11-2012 13.14.6 */
314 if (ifmsh
->ps_peers_light_sleep
== 0 &&
315 ifmsh
->ps_peers_deep_sleep
== 0 &&
316 ifmsh
->nonpeer_pm
== NL80211_MESH_POWER_ACTIVE
)
319 if (skb_tailroom(skb
) < 4)
322 pos
= skb_put(skb
, 2 + 2);
323 *pos
++ = WLAN_EID_MESH_AWAKE_WINDOW
;
325 put_unaligned_le16(ifmsh
->mshcfg
.dot11MeshAwakeWindowDuration
, pos
);
330 int mesh_add_vendor_ies(struct ieee80211_sub_if_data
*sdata
,
333 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
337 if (!ifmsh
->ie
|| !ifmsh
->ie_len
)
340 /* fast-forward to vendor IEs */
341 offset
= ieee80211_ie_split_vendor(ifmsh
->ie
, ifmsh
->ie_len
, 0);
343 if (offset
< ifmsh
->ie_len
) {
344 len
= ifmsh
->ie_len
- offset
;
345 data
= ifmsh
->ie
+ offset
;
346 if (skb_tailroom(skb
) < len
)
348 skb_put_data(skb
, data
, len
);
354 int mesh_add_rsn_ie(struct ieee80211_sub_if_data
*sdata
, struct sk_buff
*skb
)
356 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
360 if (!ifmsh
->ie
|| !ifmsh
->ie_len
)
364 data
= cfg80211_find_ie(WLAN_EID_RSN
, ifmsh
->ie
, ifmsh
->ie_len
);
370 if (skb_tailroom(skb
) < len
)
372 skb_put_data(skb
, data
, len
);
377 static int mesh_add_ds_params_ie(struct ieee80211_sub_if_data
*sdata
,
380 struct ieee80211_chanctx_conf
*chanctx_conf
;
381 struct ieee80211_channel
*chan
;
384 if (skb_tailroom(skb
) < 3)
388 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
389 if (WARN_ON(!chanctx_conf
)) {
393 chan
= chanctx_conf
->def
.chan
;
396 pos
= skb_put(skb
, 2 + 1);
397 *pos
++ = WLAN_EID_DS_PARAMS
;
399 *pos
++ = ieee80211_frequency_to_channel(chan
->center_freq
);
404 int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data
*sdata
,
407 struct ieee80211_supported_band
*sband
;
410 sband
= ieee80211_get_sband(sdata
);
414 if (!sband
->ht_cap
.ht_supported
||
415 sdata
->vif
.bss_conf
.chandef
.width
== NL80211_CHAN_WIDTH_20_NOHT
||
416 sdata
->vif
.bss_conf
.chandef
.width
== NL80211_CHAN_WIDTH_5
||
417 sdata
->vif
.bss_conf
.chandef
.width
== NL80211_CHAN_WIDTH_10
)
420 if (skb_tailroom(skb
) < 2 + sizeof(struct ieee80211_ht_cap
))
423 pos
= skb_put(skb
, 2 + sizeof(struct ieee80211_ht_cap
));
424 ieee80211_ie_build_ht_cap(pos
, &sband
->ht_cap
, sband
->ht_cap
.cap
);
429 int mesh_add_ht_oper_ie(struct ieee80211_sub_if_data
*sdata
,
432 struct ieee80211_local
*local
= sdata
->local
;
433 struct ieee80211_chanctx_conf
*chanctx_conf
;
434 struct ieee80211_channel
*channel
;
435 struct ieee80211_supported_band
*sband
;
436 struct ieee80211_sta_ht_cap
*ht_cap
;
440 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
441 if (WARN_ON(!chanctx_conf
)) {
445 channel
= chanctx_conf
->def
.chan
;
448 sband
= local
->hw
.wiphy
->bands
[channel
->band
];
449 ht_cap
= &sband
->ht_cap
;
451 if (!ht_cap
->ht_supported
||
452 sdata
->vif
.bss_conf
.chandef
.width
== NL80211_CHAN_WIDTH_20_NOHT
||
453 sdata
->vif
.bss_conf
.chandef
.width
== NL80211_CHAN_WIDTH_5
||
454 sdata
->vif
.bss_conf
.chandef
.width
== NL80211_CHAN_WIDTH_10
)
457 if (skb_tailroom(skb
) < 2 + sizeof(struct ieee80211_ht_operation
))
460 pos
= skb_put(skb
, 2 + sizeof(struct ieee80211_ht_operation
));
461 ieee80211_ie_build_ht_oper(pos
, ht_cap
, &sdata
->vif
.bss_conf
.chandef
,
462 sdata
->vif
.bss_conf
.ht_operation_mode
,
468 int mesh_add_vht_cap_ie(struct ieee80211_sub_if_data
*sdata
,
471 struct ieee80211_supported_band
*sband
;
474 sband
= ieee80211_get_sband(sdata
);
478 if (!sband
->vht_cap
.vht_supported
||
479 sdata
->vif
.bss_conf
.chandef
.width
== NL80211_CHAN_WIDTH_20_NOHT
||
480 sdata
->vif
.bss_conf
.chandef
.width
== NL80211_CHAN_WIDTH_5
||
481 sdata
->vif
.bss_conf
.chandef
.width
== NL80211_CHAN_WIDTH_10
)
484 if (skb_tailroom(skb
) < 2 + sizeof(struct ieee80211_vht_cap
))
487 pos
= skb_put(skb
, 2 + sizeof(struct ieee80211_vht_cap
));
488 ieee80211_ie_build_vht_cap(pos
, &sband
->vht_cap
, sband
->vht_cap
.cap
);
493 int mesh_add_vht_oper_ie(struct ieee80211_sub_if_data
*sdata
,
496 struct ieee80211_local
*local
= sdata
->local
;
497 struct ieee80211_chanctx_conf
*chanctx_conf
;
498 struct ieee80211_channel
*channel
;
499 struct ieee80211_supported_band
*sband
;
500 struct ieee80211_sta_vht_cap
*vht_cap
;
504 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
505 if (WARN_ON(!chanctx_conf
)) {
509 channel
= chanctx_conf
->def
.chan
;
512 sband
= local
->hw
.wiphy
->bands
[channel
->band
];
513 vht_cap
= &sband
->vht_cap
;
515 if (!vht_cap
->vht_supported
||
516 sdata
->vif
.bss_conf
.chandef
.width
== NL80211_CHAN_WIDTH_20_NOHT
||
517 sdata
->vif
.bss_conf
.chandef
.width
== NL80211_CHAN_WIDTH_5
||
518 sdata
->vif
.bss_conf
.chandef
.width
== NL80211_CHAN_WIDTH_10
)
521 if (skb_tailroom(skb
) < 2 + sizeof(struct ieee80211_vht_operation
))
524 pos
= skb_put(skb
, 2 + sizeof(struct ieee80211_vht_operation
));
525 ieee80211_ie_build_vht_oper(pos
, vht_cap
,
526 &sdata
->vif
.bss_conf
.chandef
);
531 static void ieee80211_mesh_path_timer(unsigned long data
)
533 struct ieee80211_sub_if_data
*sdata
=
534 (struct ieee80211_sub_if_data
*) data
;
536 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->work
);
539 static void ieee80211_mesh_path_root_timer(unsigned long data
)
541 struct ieee80211_sub_if_data
*sdata
=
542 (struct ieee80211_sub_if_data
*) data
;
543 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
545 set_bit(MESH_WORK_ROOT
, &ifmsh
->wrkq_flags
);
547 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->work
);
550 void ieee80211_mesh_root_setup(struct ieee80211_if_mesh
*ifmsh
)
552 if (ifmsh
->mshcfg
.dot11MeshHWMPRootMode
> IEEE80211_ROOTMODE_ROOT
)
553 set_bit(MESH_WORK_ROOT
, &ifmsh
->wrkq_flags
);
555 clear_bit(MESH_WORK_ROOT
, &ifmsh
->wrkq_flags
);
556 /* stop running timer */
557 del_timer_sync(&ifmsh
->mesh_path_root_timer
);
562 * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
563 * @hdr: 802.11 frame header
564 * @fc: frame control field
565 * @meshda: destination address in the mesh
566 * @meshsa: source address address in the mesh. Same as TA, as frame is
567 * locally originated.
569 * Return the length of the 802.11 (does not include a mesh control header)
571 int ieee80211_fill_mesh_addresses(struct ieee80211_hdr
*hdr
, __le16
*fc
,
572 const u8
*meshda
, const u8
*meshsa
)
574 if (is_multicast_ether_addr(meshda
)) {
575 *fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
);
577 memcpy(hdr
->addr1
, meshda
, ETH_ALEN
);
578 memcpy(hdr
->addr2
, meshsa
, ETH_ALEN
);
579 memcpy(hdr
->addr3
, meshsa
, ETH_ALEN
);
582 *fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
| IEEE80211_FCTL_TODS
);
584 eth_zero_addr(hdr
->addr1
); /* RA is resolved later */
585 memcpy(hdr
->addr2
, meshsa
, ETH_ALEN
);
586 memcpy(hdr
->addr3
, meshda
, ETH_ALEN
);
587 memcpy(hdr
->addr4
, meshsa
, ETH_ALEN
);
593 * ieee80211_new_mesh_header - create a new mesh header
594 * @sdata: mesh interface to be used
595 * @meshhdr: uninitialized mesh header
596 * @addr4or5: 1st address in the ae header, which may correspond to address 4
597 * (if addr6 is NULL) or address 5 (if addr6 is present). It may
599 * @addr6: 2nd address in the ae header, which corresponds to addr6 of the
602 * Return the header length.
604 unsigned int ieee80211_new_mesh_header(struct ieee80211_sub_if_data
*sdata
,
605 struct ieee80211s_hdr
*meshhdr
,
606 const char *addr4or5
, const char *addr6
)
608 if (WARN_ON(!addr4or5
&& addr6
))
611 memset(meshhdr
, 0, sizeof(*meshhdr
));
613 meshhdr
->ttl
= sdata
->u
.mesh
.mshcfg
.dot11MeshTTL
;
615 /* FIXME: racy -- TX on multiple queues can be concurrent */
616 put_unaligned(cpu_to_le32(sdata
->u
.mesh
.mesh_seqnum
), &meshhdr
->seqnum
);
617 sdata
->u
.mesh
.mesh_seqnum
++;
619 if (addr4or5
&& !addr6
) {
620 meshhdr
->flags
|= MESH_FLAGS_AE_A4
;
621 memcpy(meshhdr
->eaddr1
, addr4or5
, ETH_ALEN
);
623 } else if (addr4or5
&& addr6
) {
624 meshhdr
->flags
|= MESH_FLAGS_AE_A5_A6
;
625 memcpy(meshhdr
->eaddr1
, addr4or5
, ETH_ALEN
);
626 memcpy(meshhdr
->eaddr2
, addr6
, ETH_ALEN
);
633 static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data
*sdata
)
635 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
638 if (ifmsh
->mshcfg
.plink_timeout
> 0)
639 ieee80211_sta_expire(sdata
, ifmsh
->mshcfg
.plink_timeout
* HZ
);
640 mesh_path_expire(sdata
);
642 changed
= mesh_accept_plinks_update(sdata
);
643 ieee80211_mbss_info_change_notify(sdata
, changed
);
645 mod_timer(&ifmsh
->housekeeping_timer
,
646 round_jiffies(jiffies
+
647 IEEE80211_MESH_HOUSEKEEPING_INTERVAL
));
650 static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data
*sdata
)
652 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
655 mesh_path_tx_root_frame(sdata
);
657 if (ifmsh
->mshcfg
.dot11MeshHWMPRootMode
== IEEE80211_PROACTIVE_RANN
)
658 interval
= ifmsh
->mshcfg
.dot11MeshHWMPRannInterval
;
660 interval
= ifmsh
->mshcfg
.dot11MeshHWMProotInterval
;
662 mod_timer(&ifmsh
->mesh_path_root_timer
,
663 round_jiffies(TU_TO_EXP_TIME(interval
)));
667 ieee80211_mesh_build_beacon(struct ieee80211_if_mesh
*ifmsh
)
669 struct beacon_data
*bcn
;
670 int head_len
, tail_len
;
672 struct ieee80211_mgmt
*mgmt
;
673 struct ieee80211_chanctx_conf
*chanctx_conf
;
674 struct mesh_csa_settings
*csa
;
675 enum nl80211_band band
;
677 struct ieee80211_sub_if_data
*sdata
;
678 int hdr_len
= offsetof(struct ieee80211_mgmt
, u
.beacon
) +
679 sizeof(mgmt
->u
.beacon
);
681 sdata
= container_of(ifmsh
, struct ieee80211_sub_if_data
, u
.mesh
);
683 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
684 band
= chanctx_conf
->def
.chan
->band
;
689 /* Channel Switch Announcement */
690 2 + sizeof(struct ieee80211_channel_sw_ie
) +
691 /* Mesh Channel Switch Parameters */
692 2 + sizeof(struct ieee80211_mesh_chansw_params_ie
) +
693 /* Channel Switch Wrapper + Wide Bandwidth CSA IE */
694 2 + 2 + sizeof(struct ieee80211_wide_bw_chansw_ie
) +
695 2 + sizeof(struct ieee80211_sec_chan_offs_ie
) +
696 2 + 8 + /* supported rates */
697 2 + 3; /* DS params */
698 tail_len
= 2 + (IEEE80211_MAX_SUPP_RATES
- 8) +
699 2 + sizeof(struct ieee80211_ht_cap
) +
700 2 + sizeof(struct ieee80211_ht_operation
) +
701 2 + ifmsh
->mesh_id_len
+
702 2 + sizeof(struct ieee80211_meshconf_ie
) +
703 2 + sizeof(__le16
) + /* awake window */
704 2 + sizeof(struct ieee80211_vht_cap
) +
705 2 + sizeof(struct ieee80211_vht_operation
) +
708 bcn
= kzalloc(sizeof(*bcn
) + head_len
+ tail_len
, GFP_KERNEL
);
709 /* need an skb for IE builders to operate on */
710 skb
= dev_alloc_skb(max(head_len
, tail_len
));
716 * pointers go into the block we allocated,
717 * memory is | beacon_data | head | tail |
719 bcn
->head
= ((u8
*) bcn
) + sizeof(*bcn
);
721 /* fill in the head */
722 mgmt
= skb_put_zero(skb
, hdr_len
);
723 mgmt
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
|
724 IEEE80211_STYPE_BEACON
);
725 eth_broadcast_addr(mgmt
->da
);
726 memcpy(mgmt
->sa
, sdata
->vif
.addr
, ETH_ALEN
);
727 memcpy(mgmt
->bssid
, sdata
->vif
.addr
, ETH_ALEN
);
728 ieee80211_mps_set_frame_flags(sdata
, NULL
, (void *) mgmt
);
729 mgmt
->u
.beacon
.beacon_int
=
730 cpu_to_le16(sdata
->vif
.bss_conf
.beacon_int
);
731 mgmt
->u
.beacon
.capab_info
|= cpu_to_le16(
732 sdata
->u
.mesh
.security
? WLAN_CAPABILITY_PRIVACY
: 0);
734 pos
= skb_put(skb
, 2);
735 *pos
++ = WLAN_EID_SSID
;
739 csa
= rcu_dereference(ifmsh
->csa
);
741 enum nl80211_channel_type ct
;
742 struct cfg80211_chan_def
*chandef
;
743 int ie_len
= 2 + sizeof(struct ieee80211_channel_sw_ie
) +
744 2 + sizeof(struct ieee80211_mesh_chansw_params_ie
);
746 pos
= skb_put_zero(skb
, ie_len
);
747 *pos
++ = WLAN_EID_CHANNEL_SWITCH
;
750 *pos
++ = ieee80211_frequency_to_channel(
751 csa
->settings
.chandef
.chan
->center_freq
);
752 bcn
->csa_current_counter
= csa
->settings
.count
;
753 bcn
->csa_counter_offsets
[0] = hdr_len
+ 6;
754 *pos
++ = csa
->settings
.count
;
755 *pos
++ = WLAN_EID_CHAN_SWITCH_PARAM
;
757 if (ifmsh
->csa_role
== IEEE80211_MESH_CSA_ROLE_INIT
) {
758 *pos
++ = ifmsh
->mshcfg
.dot11MeshTTL
;
759 *pos
|= WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR
;
761 *pos
++ = ifmsh
->chsw_ttl
;
763 *pos
++ |= csa
->settings
.block_tx
?
764 WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT
: 0x00;
765 put_unaligned_le16(WLAN_REASON_MESH_CHAN
, pos
);
767 put_unaligned_le16(ifmsh
->pre_value
, pos
);
770 switch (csa
->settings
.chandef
.width
) {
771 case NL80211_CHAN_WIDTH_40
:
772 ie_len
= 2 + sizeof(struct ieee80211_sec_chan_offs_ie
);
773 pos
= skb_put_zero(skb
, ie_len
);
775 *pos
++ = WLAN_EID_SECONDARY_CHANNEL_OFFSET
; /* EID */
776 *pos
++ = 1; /* len */
777 ct
= cfg80211_get_chandef_type(&csa
->settings
.chandef
);
778 if (ct
== NL80211_CHAN_HT40PLUS
)
779 *pos
++ = IEEE80211_HT_PARAM_CHA_SEC_ABOVE
;
781 *pos
++ = IEEE80211_HT_PARAM_CHA_SEC_BELOW
;
783 case NL80211_CHAN_WIDTH_80
:
784 case NL80211_CHAN_WIDTH_80P80
:
785 case NL80211_CHAN_WIDTH_160
:
786 /* Channel Switch Wrapper + Wide Bandwidth CSA IE */
788 sizeof(struct ieee80211_wide_bw_chansw_ie
);
789 pos
= skb_put_zero(skb
, ie_len
);
791 *pos
++ = WLAN_EID_CHANNEL_SWITCH_WRAPPER
; /* EID */
792 *pos
++ = 5; /* len */
794 chandef
= &csa
->settings
.chandef
;
795 ieee80211_ie_build_wide_bw_cs(pos
, chandef
);
803 if (ieee80211_add_srates_ie(sdata
, skb
, true, band
) ||
804 mesh_add_ds_params_ie(sdata
, skb
))
807 bcn
->head_len
= skb
->len
;
808 memcpy(bcn
->head
, skb
->data
, bcn
->head_len
);
812 bcn
->tail
= bcn
->head
+ bcn
->head_len
;
814 if (ieee80211_add_ext_srates_ie(sdata
, skb
, true, band
) ||
815 mesh_add_rsn_ie(sdata
, skb
) ||
816 mesh_add_ht_cap_ie(sdata
, skb
) ||
817 mesh_add_ht_oper_ie(sdata
, skb
) ||
818 mesh_add_meshid_ie(sdata
, skb
) ||
819 mesh_add_meshconf_ie(sdata
, skb
) ||
820 mesh_add_awake_window_ie(sdata
, skb
) ||
821 mesh_add_vht_cap_ie(sdata
, skb
) ||
822 mesh_add_vht_oper_ie(sdata
, skb
) ||
823 mesh_add_vendor_ies(sdata
, skb
))
826 bcn
->tail_len
= skb
->len
;
827 memcpy(bcn
->tail
, skb
->data
, bcn
->tail_len
);
828 bcn
->meshconf
= (struct ieee80211_meshconf_ie
*)
829 (bcn
->tail
+ ifmsh
->meshconf_offset
);
832 rcu_assign_pointer(ifmsh
->beacon
, bcn
);
841 ieee80211_mesh_rebuild_beacon(struct ieee80211_sub_if_data
*sdata
)
843 struct beacon_data
*old_bcn
;
846 old_bcn
= rcu_dereference_protected(sdata
->u
.mesh
.beacon
,
847 lockdep_is_held(&sdata
->wdev
.mtx
));
848 ret
= ieee80211_mesh_build_beacon(&sdata
->u
.mesh
);
850 /* just reuse old beacon */
854 kfree_rcu(old_bcn
, rcu_head
);
858 void ieee80211_mbss_info_change_notify(struct ieee80211_sub_if_data
*sdata
,
861 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
862 unsigned long bits
= changed
;
868 /* if we race with running work, worst case this work becomes a noop */
869 for_each_set_bit(bit
, &bits
, sizeof(changed
) * BITS_PER_BYTE
)
870 set_bit(bit
, &ifmsh
->mbss_changed
);
871 set_bit(MESH_WORK_MBSS_CHANGED
, &ifmsh
->wrkq_flags
);
872 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->work
);
875 int ieee80211_start_mesh(struct ieee80211_sub_if_data
*sdata
)
877 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
878 struct ieee80211_local
*local
= sdata
->local
;
879 u32 changed
= BSS_CHANGED_BEACON
|
880 BSS_CHANGED_BEACON_ENABLED
|
882 BSS_CHANGED_BASIC_RATES
|
883 BSS_CHANGED_BEACON_INT
;
885 local
->fif_other_bss
++;
886 /* mesh ifaces must set allmulti to forward mcast traffic */
887 atomic_inc(&local
->iff_allmultis
);
888 ieee80211_configure_filter(local
);
890 ifmsh
->mesh_cc_id
= 0; /* Disabled */
891 /* register sync ops from extensible synchronization framework */
892 ifmsh
->sync_ops
= ieee80211_mesh_sync_ops_get(ifmsh
->mesh_sp_id
);
893 ifmsh
->sync_offset_clockdrift_max
= 0;
894 set_bit(MESH_WORK_HOUSEKEEPING
, &ifmsh
->wrkq_flags
);
895 ieee80211_mesh_root_setup(ifmsh
);
896 ieee80211_queue_work(&local
->hw
, &sdata
->work
);
897 sdata
->vif
.bss_conf
.ht_operation_mode
=
898 ifmsh
->mshcfg
.ht_opmode
;
899 sdata
->vif
.bss_conf
.enable_beacon
= true;
901 changed
|= ieee80211_mps_local_status_update(sdata
);
903 if (ieee80211_mesh_build_beacon(ifmsh
)) {
904 ieee80211_stop_mesh(sdata
);
908 ieee80211_recalc_dtim(local
, sdata
);
909 ieee80211_bss_info_change_notify(sdata
, changed
);
911 netif_carrier_on(sdata
->dev
);
915 void ieee80211_stop_mesh(struct ieee80211_sub_if_data
*sdata
)
917 struct ieee80211_local
*local
= sdata
->local
;
918 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
919 struct beacon_data
*bcn
;
921 netif_carrier_off(sdata
->dev
);
923 /* flush STAs and mpaths on this iface */
924 sta_info_flush(sdata
);
925 mesh_path_flush_by_iface(sdata
);
927 /* stop the beacon */
928 ifmsh
->mesh_id_len
= 0;
929 sdata
->vif
.bss_conf
.enable_beacon
= false;
930 clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED
, &sdata
->state
);
931 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_BEACON_ENABLED
);
934 bcn
= rcu_dereference_protected(ifmsh
->beacon
,
935 lockdep_is_held(&sdata
->wdev
.mtx
));
936 RCU_INIT_POINTER(ifmsh
->beacon
, NULL
);
937 kfree_rcu(bcn
, rcu_head
);
939 /* free all potentially still buffered group-addressed frames */
940 local
->total_ps_buffered
-= skb_queue_len(&ifmsh
->ps
.bc_buf
);
941 skb_queue_purge(&ifmsh
->ps
.bc_buf
);
943 del_timer_sync(&sdata
->u
.mesh
.housekeeping_timer
);
944 del_timer_sync(&sdata
->u
.mesh
.mesh_path_root_timer
);
945 del_timer_sync(&sdata
->u
.mesh
.mesh_path_timer
);
947 /* clear any mesh work (for next join) we may have accrued */
948 ifmsh
->wrkq_flags
= 0;
949 ifmsh
->mbss_changed
= 0;
951 local
->fif_other_bss
--;
952 atomic_dec(&local
->iff_allmultis
);
953 ieee80211_configure_filter(local
);
956 static void ieee80211_mesh_csa_mark_radar(struct ieee80211_sub_if_data
*sdata
)
960 /* if the current channel is a DFS channel, mark the channel as
963 err
= cfg80211_chandef_dfs_required(sdata
->local
->hw
.wiphy
,
964 &sdata
->vif
.bss_conf
.chandef
,
965 NL80211_IFTYPE_MESH_POINT
);
967 cfg80211_radar_event(sdata
->local
->hw
.wiphy
,
968 &sdata
->vif
.bss_conf
.chandef
, GFP_ATOMIC
);
972 ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data
*sdata
,
973 struct ieee802_11_elems
*elems
, bool beacon
)
975 struct cfg80211_csa_settings params
;
976 struct ieee80211_csa_ie csa_ie
;
977 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
978 struct ieee80211_supported_band
*sband
;
982 sdata_assert_lock(sdata
);
984 sband
= ieee80211_get_sband(sdata
);
989 switch (sdata
->vif
.bss_conf
.chandef
.width
) {
990 case NL80211_CHAN_WIDTH_20_NOHT
:
991 sta_flags
|= IEEE80211_STA_DISABLE_HT
;
992 case NL80211_CHAN_WIDTH_20
:
993 sta_flags
|= IEEE80211_STA_DISABLE_40MHZ
;
994 case NL80211_CHAN_WIDTH_40
:
995 sta_flags
|= IEEE80211_STA_DISABLE_VHT
;
1001 memset(¶ms
, 0, sizeof(params
));
1002 err
= ieee80211_parse_ch_switch_ie(sdata
, elems
, sband
->band
,
1003 sta_flags
, sdata
->vif
.addr
,
1010 /* Mark the channel unavailable if the reason for the switch is
1013 if (csa_ie
.reason_code
== WLAN_REASON_MESH_CHAN_REGULATORY
)
1014 ieee80211_mesh_csa_mark_radar(sdata
);
1016 params
.chandef
= csa_ie
.chandef
;
1017 params
.count
= csa_ie
.count
;
1019 if (!cfg80211_chandef_usable(sdata
->local
->hw
.wiphy
, ¶ms
.chandef
,
1020 IEEE80211_CHAN_DISABLED
) ||
1021 !cfg80211_reg_can_beacon(sdata
->local
->hw
.wiphy
, ¶ms
.chandef
,
1022 NL80211_IFTYPE_MESH_POINT
)) {
1024 "mesh STA %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting\n",
1026 params
.chandef
.chan
->center_freq
,
1027 params
.chandef
.width
,
1028 params
.chandef
.center_freq1
,
1029 params
.chandef
.center_freq2
);
1033 err
= cfg80211_chandef_dfs_required(sdata
->local
->hw
.wiphy
,
1035 NL80211_IFTYPE_MESH_POINT
);
1038 if (err
> 0 && !ifmsh
->userspace_handles_dfs
) {
1040 "mesh STA %pM switches to channel requiring DFS (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting\n",
1042 params
.chandef
.chan
->center_freq
,
1043 params
.chandef
.width
,
1044 params
.chandef
.center_freq1
,
1045 params
.chandef
.center_freq2
);
1049 params
.radar_required
= err
;
1051 if (cfg80211_chandef_identical(¶ms
.chandef
,
1052 &sdata
->vif
.bss_conf
.chandef
)) {
1054 "received csa with an identical chandef, ignoring\n");
1059 "received channel switch announcement to go to channel %d MHz\n",
1060 params
.chandef
.chan
->center_freq
);
1062 params
.block_tx
= csa_ie
.mode
& WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT
;
1064 ifmsh
->chsw_ttl
= csa_ie
.ttl
- 1;
1065 if (ifmsh
->pre_value
>= csa_ie
.pre_value
)
1067 ifmsh
->pre_value
= csa_ie
.pre_value
;
1070 if (ifmsh
->chsw_ttl
>= ifmsh
->mshcfg
.dot11MeshTTL
)
1073 ifmsh
->csa_role
= IEEE80211_MESH_CSA_ROLE_REPEATER
;
1075 if (ieee80211_channel_switch(sdata
->local
->hw
.wiphy
, sdata
->dev
,
1083 ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data
*sdata
,
1084 struct ieee80211_mgmt
*mgmt
, size_t len
)
1086 struct ieee80211_local
*local
= sdata
->local
;
1087 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
1088 struct sk_buff
*presp
;
1089 struct beacon_data
*bcn
;
1090 struct ieee80211_mgmt
*hdr
;
1091 struct ieee802_11_elems elems
;
1095 pos
= mgmt
->u
.probe_req
.variable
;
1096 baselen
= (u8
*) pos
- (u8
*) mgmt
;
1100 ieee802_11_parse_elems(pos
, len
- baselen
, false, &elems
);
1105 /* 802.11-2012 10.1.4.3.2 */
1106 if ((!ether_addr_equal(mgmt
->da
, sdata
->vif
.addr
) &&
1107 !is_broadcast_ether_addr(mgmt
->da
)) ||
1108 elems
.ssid_len
!= 0)
1111 if (elems
.mesh_id_len
!= 0 &&
1112 (elems
.mesh_id_len
!= ifmsh
->mesh_id_len
||
1113 memcmp(elems
.mesh_id
, ifmsh
->mesh_id
, ifmsh
->mesh_id_len
)))
1117 bcn
= rcu_dereference(ifmsh
->beacon
);
1122 presp
= dev_alloc_skb(local
->tx_headroom
+
1123 bcn
->head_len
+ bcn
->tail_len
);
1127 skb_reserve(presp
, local
->tx_headroom
);
1128 skb_put_data(presp
, bcn
->head
, bcn
->head_len
);
1129 skb_put_data(presp
, bcn
->tail
, bcn
->tail_len
);
1130 hdr
= (struct ieee80211_mgmt
*) presp
->data
;
1131 hdr
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
|
1132 IEEE80211_STYPE_PROBE_RESP
);
1133 memcpy(hdr
->da
, mgmt
->sa
, ETH_ALEN
);
1134 IEEE80211_SKB_CB(presp
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
1135 ieee80211_tx_skb(sdata
, presp
);
1140 static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data
*sdata
,
1142 struct ieee80211_mgmt
*mgmt
,
1144 struct ieee80211_rx_status
*rx_status
)
1146 struct ieee80211_local
*local
= sdata
->local
;
1147 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
1148 struct ieee802_11_elems elems
;
1149 struct ieee80211_channel
*channel
;
1152 enum nl80211_band band
= rx_status
->band
;
1154 /* ignore ProbeResp to foreign address */
1155 if (stype
== IEEE80211_STYPE_PROBE_RESP
&&
1156 !ether_addr_equal(mgmt
->da
, sdata
->vif
.addr
))
1159 baselen
= (u8
*) mgmt
->u
.probe_resp
.variable
- (u8
*) mgmt
;
1163 ieee802_11_parse_elems(mgmt
->u
.probe_resp
.variable
, len
- baselen
,
1166 /* ignore non-mesh or secure / unsecure mismatch */
1167 if ((!elems
.mesh_id
|| !elems
.mesh_config
) ||
1168 (elems
.rsn
&& sdata
->u
.mesh
.security
== IEEE80211_MESH_SEC_NONE
) ||
1169 (!elems
.rsn
&& sdata
->u
.mesh
.security
!= IEEE80211_MESH_SEC_NONE
))
1172 if (elems
.ds_params
)
1173 freq
= ieee80211_channel_to_frequency(elems
.ds_params
[0], band
);
1175 freq
= rx_status
->freq
;
1177 channel
= ieee80211_get_channel(local
->hw
.wiphy
, freq
);
1179 if (!channel
|| channel
->flags
& IEEE80211_CHAN_DISABLED
)
1182 if (mesh_matches_local(sdata
, &elems
)) {
1183 mpl_dbg(sdata
, "rssi_threshold=%d,rx_status->signal=%d\n",
1184 sdata
->u
.mesh
.mshcfg
.rssi_threshold
, rx_status
->signal
);
1185 if (!sdata
->u
.mesh
.user_mpm
||
1186 sdata
->u
.mesh
.mshcfg
.rssi_threshold
== 0 ||
1187 sdata
->u
.mesh
.mshcfg
.rssi_threshold
< rx_status
->signal
)
1188 mesh_neighbour_update(sdata
, mgmt
->sa
, &elems
);
1191 if (ifmsh
->sync_ops
)
1192 ifmsh
->sync_ops
->rx_bcn_presp(sdata
,
1193 stype
, mgmt
, &elems
, rx_status
);
1195 if (ifmsh
->csa_role
!= IEEE80211_MESH_CSA_ROLE_INIT
&&
1196 !sdata
->vif
.csa_active
)
1197 ieee80211_mesh_process_chnswitch(sdata
, &elems
, true);
1200 int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data
*sdata
)
1202 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
1203 struct mesh_csa_settings
*tmp_csa_settings
;
1207 /* Reset the TTL value and Initiator flag */
1208 ifmsh
->csa_role
= IEEE80211_MESH_CSA_ROLE_NONE
;
1209 ifmsh
->chsw_ttl
= 0;
1211 /* Remove the CSA and MCSP elements from the beacon */
1212 tmp_csa_settings
= rcu_dereference(ifmsh
->csa
);
1213 RCU_INIT_POINTER(ifmsh
->csa
, NULL
);
1214 if (tmp_csa_settings
)
1215 kfree_rcu(tmp_csa_settings
, rcu_head
);
1216 ret
= ieee80211_mesh_rebuild_beacon(sdata
);
1220 changed
|= BSS_CHANGED_BEACON
;
1222 mcsa_dbg(sdata
, "complete switching to center freq %d MHz",
1223 sdata
->vif
.bss_conf
.chandef
.chan
->center_freq
);
1227 int ieee80211_mesh_csa_beacon(struct ieee80211_sub_if_data
*sdata
,
1228 struct cfg80211_csa_settings
*csa_settings
)
1230 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
1231 struct mesh_csa_settings
*tmp_csa_settings
;
1234 tmp_csa_settings
= kmalloc(sizeof(*tmp_csa_settings
),
1236 if (!tmp_csa_settings
)
1239 memcpy(&tmp_csa_settings
->settings
, csa_settings
,
1240 sizeof(struct cfg80211_csa_settings
));
1242 rcu_assign_pointer(ifmsh
->csa
, tmp_csa_settings
);
1244 ret
= ieee80211_mesh_rebuild_beacon(sdata
);
1246 tmp_csa_settings
= rcu_dereference(ifmsh
->csa
);
1247 RCU_INIT_POINTER(ifmsh
->csa
, NULL
);
1248 kfree_rcu(tmp_csa_settings
, rcu_head
);
1252 return BSS_CHANGED_BEACON
;
1255 static int mesh_fwd_csa_frame(struct ieee80211_sub_if_data
*sdata
,
1256 struct ieee80211_mgmt
*mgmt
, size_t len
)
1258 struct ieee80211_mgmt
*mgmt_fwd
;
1259 struct sk_buff
*skb
;
1260 struct ieee80211_local
*local
= sdata
->local
;
1261 u8
*pos
= mgmt
->u
.action
.u
.chan_switch
.variable
;
1264 skb
= dev_alloc_skb(local
->tx_headroom
+ len
);
1267 skb_reserve(skb
, local
->tx_headroom
);
1268 mgmt_fwd
= skb_put(skb
, len
);
1270 /* offset_ttl is based on whether the secondary channel
1271 * offset is available or not. Subtract 1 from the mesh TTL
1272 * and disable the initiator flag before forwarding.
1274 offset_ttl
= (len
< 42) ? 7 : 10;
1275 *(pos
+ offset_ttl
) -= 1;
1276 *(pos
+ offset_ttl
+ 1) &= ~WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR
;
1278 memcpy(mgmt_fwd
, mgmt
, len
);
1279 eth_broadcast_addr(mgmt_fwd
->da
);
1280 memcpy(mgmt_fwd
->sa
, sdata
->vif
.addr
, ETH_ALEN
);
1281 memcpy(mgmt_fwd
->bssid
, sdata
->vif
.addr
, ETH_ALEN
);
1283 ieee80211_tx_skb(sdata
, skb
);
1287 static void mesh_rx_csa_frame(struct ieee80211_sub_if_data
*sdata
,
1288 struct ieee80211_mgmt
*mgmt
, size_t len
)
1290 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
1291 struct ieee802_11_elems elems
;
1293 bool fwd_csa
= true;
1297 if (mgmt
->u
.action
.u
.measurement
.action_code
!=
1298 WLAN_ACTION_SPCT_CHL_SWITCH
)
1301 pos
= mgmt
->u
.action
.u
.chan_switch
.variable
;
1302 baselen
= offsetof(struct ieee80211_mgmt
,
1303 u
.action
.u
.chan_switch
.variable
);
1304 ieee802_11_parse_elems(pos
, len
- baselen
, true, &elems
);
1306 ifmsh
->chsw_ttl
= elems
.mesh_chansw_params_ie
->mesh_ttl
;
1307 if (!--ifmsh
->chsw_ttl
)
1310 pre_value
= le16_to_cpu(elems
.mesh_chansw_params_ie
->mesh_pre_value
);
1311 if (ifmsh
->pre_value
>= pre_value
)
1314 ifmsh
->pre_value
= pre_value
;
1316 if (!sdata
->vif
.csa_active
&&
1317 !ieee80211_mesh_process_chnswitch(sdata
, &elems
, false)) {
1318 mcsa_dbg(sdata
, "Failed to process CSA action frame");
1322 /* forward or re-broadcast the CSA frame */
1324 if (mesh_fwd_csa_frame(sdata
, mgmt
, len
) < 0)
1325 mcsa_dbg(sdata
, "Failed to forward the CSA frame");
1329 static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data
*sdata
,
1330 struct ieee80211_mgmt
*mgmt
,
1332 struct ieee80211_rx_status
*rx_status
)
1334 switch (mgmt
->u
.action
.category
) {
1335 case WLAN_CATEGORY_SELF_PROTECTED
:
1336 switch (mgmt
->u
.action
.u
.self_prot
.action_code
) {
1337 case WLAN_SP_MESH_PEERING_OPEN
:
1338 case WLAN_SP_MESH_PEERING_CLOSE
:
1339 case WLAN_SP_MESH_PEERING_CONFIRM
:
1340 mesh_rx_plink_frame(sdata
, mgmt
, len
, rx_status
);
1344 case WLAN_CATEGORY_MESH_ACTION
:
1345 if (mesh_action_is_path_sel(mgmt
))
1346 mesh_rx_path_sel_frame(sdata
, mgmt
, len
);
1348 case WLAN_CATEGORY_SPECTRUM_MGMT
:
1349 mesh_rx_csa_frame(sdata
, mgmt
, len
);
1354 void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data
*sdata
,
1355 struct sk_buff
*skb
)
1357 struct ieee80211_rx_status
*rx_status
;
1358 struct ieee80211_mgmt
*mgmt
;
1363 /* mesh already went down */
1364 if (!sdata
->u
.mesh
.mesh_id_len
)
1367 rx_status
= IEEE80211_SKB_RXCB(skb
);
1368 mgmt
= (struct ieee80211_mgmt
*) skb
->data
;
1369 stype
= le16_to_cpu(mgmt
->frame_control
) & IEEE80211_FCTL_STYPE
;
1372 case IEEE80211_STYPE_PROBE_RESP
:
1373 case IEEE80211_STYPE_BEACON
:
1374 ieee80211_mesh_rx_bcn_presp(sdata
, stype
, mgmt
, skb
->len
,
1377 case IEEE80211_STYPE_PROBE_REQ
:
1378 ieee80211_mesh_rx_probe_req(sdata
, mgmt
, skb
->len
);
1380 case IEEE80211_STYPE_ACTION
:
1381 ieee80211_mesh_rx_mgmt_action(sdata
, mgmt
, skb
->len
, rx_status
);
1385 sdata_unlock(sdata
);
1388 static void mesh_bss_info_changed(struct ieee80211_sub_if_data
*sdata
)
1390 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
1391 u32 bit
, changed
= 0;
1393 for_each_set_bit(bit
, &ifmsh
->mbss_changed
,
1394 sizeof(changed
) * BITS_PER_BYTE
) {
1395 clear_bit(bit
, &ifmsh
->mbss_changed
);
1396 changed
|= BIT(bit
);
1399 if (sdata
->vif
.bss_conf
.enable_beacon
&&
1400 (changed
& (BSS_CHANGED_BEACON
|
1402 BSS_CHANGED_BASIC_RATES
|
1403 BSS_CHANGED_BEACON_INT
)))
1404 if (ieee80211_mesh_rebuild_beacon(sdata
))
1407 ieee80211_bss_info_change_notify(sdata
, changed
);
1410 void ieee80211_mesh_work(struct ieee80211_sub_if_data
*sdata
)
1412 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
1416 /* mesh already went down */
1417 if (!sdata
->u
.mesh
.mesh_id_len
)
1420 if (ifmsh
->preq_queue_len
&&
1422 ifmsh
->last_preq
+ msecs_to_jiffies(ifmsh
->mshcfg
.dot11MeshHWMPpreqMinInterval
)))
1423 mesh_path_start_discovery(sdata
);
1425 if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING
, &ifmsh
->wrkq_flags
))
1426 ieee80211_mesh_housekeeping(sdata
);
1428 if (test_and_clear_bit(MESH_WORK_ROOT
, &ifmsh
->wrkq_flags
))
1429 ieee80211_mesh_rootpath(sdata
);
1431 if (test_and_clear_bit(MESH_WORK_DRIFT_ADJUST
, &ifmsh
->wrkq_flags
))
1432 mesh_sync_adjust_tsf(sdata
);
1434 if (test_and_clear_bit(MESH_WORK_MBSS_CHANGED
, &ifmsh
->wrkq_flags
))
1435 mesh_bss_info_changed(sdata
);
1437 sdata_unlock(sdata
);
1441 void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data
*sdata
)
1443 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
1444 static u8 zero_addr
[ETH_ALEN
] = {};
1446 setup_timer(&ifmsh
->housekeeping_timer
,
1447 ieee80211_mesh_housekeeping_timer
,
1448 (unsigned long) sdata
);
1450 ifmsh
->accepting_plinks
= true;
1451 atomic_set(&ifmsh
->mpaths
, 0);
1452 mesh_rmc_init(sdata
);
1453 ifmsh
->last_preq
= jiffies
;
1454 ifmsh
->next_perr
= jiffies
;
1455 ifmsh
->csa_role
= IEEE80211_MESH_CSA_ROLE_NONE
;
1456 /* Allocate all mesh structures when creating the first mesh interface. */
1457 if (!mesh_allocated
)
1460 mesh_pathtbl_init(sdata
);
1462 setup_timer(&ifmsh
->mesh_path_timer
,
1463 ieee80211_mesh_path_timer
,
1464 (unsigned long) sdata
);
1465 setup_timer(&ifmsh
->mesh_path_root_timer
,
1466 ieee80211_mesh_path_root_timer
,
1467 (unsigned long) sdata
);
1468 INIT_LIST_HEAD(&ifmsh
->preq_queue
.list
);
1469 skb_queue_head_init(&ifmsh
->ps
.bc_buf
);
1470 spin_lock_init(&ifmsh
->mesh_preq_queue_lock
);
1471 spin_lock_init(&ifmsh
->sync_offset_lock
);
1472 RCU_INIT_POINTER(ifmsh
->beacon
, NULL
);
1474 sdata
->vif
.bss_conf
.bssid
= zero_addr
;
1477 void ieee80211_mesh_teardown_sdata(struct ieee80211_sub_if_data
*sdata
)
1479 mesh_rmc_free(sdata
);
1480 mesh_pathtbl_unregister(sdata
);