| blob | 4ec843123cc3bd1f206aa8b2315b3acad11b1a88 |
1 0 Unnamed devices (e.g. non-device mounts)
2 0 = reserved as null device number
3 See block major 144, 145, 146 for expansion areas.
5 1 char Memory devices
6 1 = /dev/mem Physical memory access
7 2 = /dev/kmem Kernel virtual memory access
8 3 = /dev/null Null device
9 4 = /dev/port I/O port access
10 5 = /dev/zero Null byte source
11 6 = /dev/core OBSOLETE - replaced by /proc/kcore
12 7 = /dev/full Returns ENOSPC on write
13 8 = /dev/random Nondeterministic random number gen.
14 9 = /dev/urandom Faster, less secure random number gen.
15 10 = /dev/aio Asynchronous I/O notification interface
16 11 = /dev/kmsg Writes to this come out as printk's, reads
17 export the buffered printk records.
18 12 = /dev/oldmem OBSOLETE - replaced by /proc/vmcore
20 1 block RAM disk
21 0 = /dev/ram0 First RAM disk
22 1 = /dev/ram1 Second RAM disk
23 ...
24 250 = /dev/initrd Initial RAM disk
26 Older kernels had /dev/ramdisk (1, 1) here.
27 /dev/initrd refers to a RAM disk which was preloaded
28 by the boot loader; newer kernels use /dev/ram0 for
29 the initrd.
31 2 char Pseudo-TTY masters
32 0 = /dev/ptyp0 First PTY master
33 1 = /dev/ptyp1 Second PTY master
34 ...
35 255 = /dev/ptyef 256th PTY master
37 Pseudo-tty's are named as follows:
38 * Masters are "pty", slaves are "tty";
39 * the fourth letter is one of pqrstuvwxyzabcde indicating
40 the 1st through 16th series of 16 pseudo-ttys each, and
41 * the fifth letter is one of 0123456789abcdef indicating
42 the position within the series.
44 These are the old-style (BSD) PTY devices; Unix98
45 devices are on major 128 and above and use the PTY
46 master multiplex (/dev/ptmx) to acquire a PTY on
47 demand.
49 2 block Floppy disks
50 0 = /dev/fd0 Controller 0, drive 0, autodetect
51 1 = /dev/fd1 Controller 0, drive 1, autodetect
52 2 = /dev/fd2 Controller 0, drive 2, autodetect
53 3 = /dev/fd3 Controller 0, drive 3, autodetect
54 128 = /dev/fd4 Controller 1, drive 0, autodetect
55 129 = /dev/fd5 Controller 1, drive 1, autodetect
56 130 = /dev/fd6 Controller 1, drive 2, autodetect
57 131 = /dev/fd7 Controller 1, drive 3, autodetect
59 To specify format, add to the autodetect device number:
60 0 = /dev/fd? Autodetect format
61 4 = /dev/fd?d360 5.25" 360K in a 360K drive(1)
62 20 = /dev/fd?h360 5.25" 360K in a 1200K drive(1)
63 48 = /dev/fd?h410 5.25" 410K in a 1200K drive
64 64 = /dev/fd?h420 5.25" 420K in a 1200K drive
65 24 = /dev/fd?h720 5.25" 720K in a 1200K drive
66 80 = /dev/fd?h880 5.25" 880K in a 1200K drive(1)
67 8 = /dev/fd?h1200 5.25" 1200K in a 1200K drive(1)
68 40 = /dev/fd?h1440 5.25" 1440K in a 1200K drive(1)
69 56 = /dev/fd?h1476 5.25" 1476K in a 1200K drive
70 72 = /dev/fd?h1494 5.25" 1494K in a 1200K drive
71 92 = /dev/fd?h1600 5.25" 1600K in a 1200K drive(1)
73 12 = /dev/fd?u360 3.5" 360K Double Density(2)
74 16 = /dev/fd?u720 3.5" 720K Double Density(1)
75 120 = /dev/fd?u800 3.5" 800K Double Density(2)
76 52 = /dev/fd?u820 3.5" 820K Double Density
77 68 = /dev/fd?u830 3.5" 830K Double Density
78 84 = /dev/fd?u1040 3.5" 1040K Double Density(1)
79 88 = /dev/fd?u1120 3.5" 1120K Double Density(1)
80 28 = /dev/fd?u1440 3.5" 1440K High Density(1)
81 124 = /dev/fd?u1600 3.5" 1600K High Density(1)
82 44 = /dev/fd?u1680 3.5" 1680K High Density(3)
83 60 = /dev/fd?u1722 3.5" 1722K High Density
84 76 = /dev/fd?u1743 3.5" 1743K High Density
85 96 = /dev/fd?u1760 3.5" 1760K High Density
86 116 = /dev/fd?u1840 3.5" 1840K High Density(3)
87 100 = /dev/fd?u1920 3.5" 1920K High Density(1)
88 32 = /dev/fd?u2880 3.5" 2880K Extra Density(1)
89 104 = /dev/fd?u3200 3.5" 3200K Extra Density
90 108 = /dev/fd?u3520 3.5" 3520K Extra Density
91 112 = /dev/fd?u3840 3.5" 3840K Extra Density(1)
93 36 = /dev/fd?CompaQ Compaq 2880K drive; obsolete?
95 (1) Autodetectable format
96 (2) Autodetectable format in a Double Density (720K) drive only
97 (3) Autodetectable format in a High Density (1440K) drive only
99 NOTE: The letter in the device name (d, q, h or u)
100 signifies the type of drive: 5.25" Double Density (d),
101 5.25" Quad Density (q), 5.25" High Density (h) or 3.5"
102 (any model, u). The use of the capital letters D, H
103 and E for the 3.5" models have been deprecated, since
104 the drive type is insignificant for these devices.
106 3 char Pseudo-TTY slaves
107 0 = /dev/ttyp0 First PTY slave
108 1 = /dev/ttyp1 Second PTY slave
109 ...
110 255 = /dev/ttyef 256th PTY slave
112 These are the old-style (BSD) PTY devices; Unix98
113 devices are on major 136 and above.
115 3 block First MFM, RLL and IDE hard disk/CD-ROM interface
116 0 = /dev/hda Master: whole disk (or CD-ROM)
117 64 = /dev/hdb Slave: whole disk (or CD-ROM)
119 For partitions, add to the whole disk device number:
120 0 = /dev/hd? Whole disk
121 1 = /dev/hd?1 First partition
122 2 = /dev/hd?2 Second partition
123 ...
124 63 = /dev/hd?63 63rd partition
126 For Linux/i386, partitions 1-4 are the primary
127 partitions, and 5 and above are logical partitions.
128 Other versions of Linux use partitioning schemes
129 appropriate to their respective architectures.
131 4 char TTY devices
132 0 = /dev/tty0 Current virtual console
134 1 = /dev/tty1 First virtual console
135 ...
136 63 = /dev/tty63 63rd virtual console
137 64 = /dev/ttyS0 First UART serial port
138 ...
139 255 = /dev/ttyS191 192nd UART serial port
141 UART serial ports refer to 8250/16450/16550 series devices.
143 Older versions of the Linux kernel used this major
144 number for BSD PTY devices. As of Linux 2.1.115, this
145 is no longer supported. Use major numbers 2 and 3.
147 4 block Aliases for dynamically allocated major devices to be used
148 when its not possible to create the real device nodes
149 because the root filesystem is mounted read-only.
151 0 = /dev/root
153 5 char Alternate TTY devices
154 0 = /dev/tty Current TTY device
155 1 = /dev/console System console
156 2 = /dev/ptmx PTY master multiplex
157 3 = /dev/ttyprintk User messages via printk TTY device
158 64 = /dev/cua0 Callout device for ttyS0
159 ...
160 255 = /dev/cua191 Callout device for ttyS191
162 (5,1) is /dev/console starting with Linux 2.1.71. See
163 the section on terminal devices for more information
164 on /dev/console.
166 6 char Parallel printer devices
167 0 = /dev/lp0 Parallel printer on parport0
168 1 = /dev/lp1 Parallel printer on parport1
169 ...
171 Current Linux kernels no longer have a fixed mapping
172 between parallel ports and I/O addresses. Instead,
173 they are redirected through the parport multiplex layer.
175 7 char Virtual console capture devices
176 0 = /dev/vcs Current vc text contents
177 1 = /dev/vcs1 tty1 text contents
178 ...
179 63 = /dev/vcs63 tty63 text contents
180 128 = /dev/vcsa Current vc text/attribute contents
181 129 = /dev/vcsa1 tty1 text/attribute contents
182 ...
183 191 = /dev/vcsa63 tty63 text/attribute contents
185 NOTE: These devices permit both read and write access.
187 7 block Loopback devices
188 0 = /dev/loop0 First loop device
189 1 = /dev/loop1 Second loop device
190 ...
192 The loop devices are used to mount filesystems not
193 associated with block devices. The binding to the
194 loop devices is handled by mount(8) or losetup(8).
196 8 block SCSI disk devices (0-15)
197 0 = /dev/sda First SCSI disk whole disk
198 16 = /dev/sdb Second SCSI disk whole disk
199 32 = /dev/sdc Third SCSI disk whole disk
200 ...
201 240 = /dev/sdp Sixteenth SCSI disk whole disk
203 Partitions are handled in the same way as for IDE
204 disks (see major number 3) except that the limit on
205 partitions is 15.
207 9 char SCSI tape devices
208 0 = /dev/st0 First SCSI tape, mode 0
209 1 = /dev/st1 Second SCSI tape, mode 0
210 ...
211 32 = /dev/st0l First SCSI tape, mode 1
212 33 = /dev/st1l Second SCSI tape, mode 1
213 ...
214 64 = /dev/st0m First SCSI tape, mode 2
215 65 = /dev/st1m Second SCSI tape, mode 2
216 ...
217 96 = /dev/st0a First SCSI tape, mode 3
218 97 = /dev/st1a Second SCSI tape, mode 3
219 ...
220 128 = /dev/nst0 First SCSI tape, mode 0, no rewind
221 129 = /dev/nst1 Second SCSI tape, mode 0, no rewind
222 ...
223 160 = /dev/nst0l First SCSI tape, mode 1, no rewind
224 161 = /dev/nst1l Second SCSI tape, mode 1, no rewind
225 ...
226 192 = /dev/nst0m First SCSI tape, mode 2, no rewind
227 193 = /dev/nst1m Second SCSI tape, mode 2, no rewind
228 ...
229 224 = /dev/nst0a First SCSI tape, mode 3, no rewind
230 225 = /dev/nst1a Second SCSI tape, mode 3, no rewind
231 ...
233 "No rewind" refers to the omission of the default
234 automatic rewind on device close. The MTREW or MTOFFL
235 ioctl()'s can be used to rewind the tape regardless of
236 the device used to access it.
238 9 block Metadisk (RAID) devices
239 0 = /dev/md0 First metadisk group
240 1 = /dev/md1 Second metadisk group
241 ...
243 The metadisk driver is used to span a
244 filesystem across multiple physical disks.
246 10 char Non-serial mice, misc features
247 0 = /dev/logibm Logitech bus mouse
248 1 = /dev/psaux PS/2-style mouse port
249 2 = /dev/inportbm Microsoft Inport bus mouse
250 3 = /dev/atibm ATI XL bus mouse
251 4 = /dev/jbm J-mouse
252 4 = /dev/amigamouse Amiga mouse (68k/Amiga)
253 5 = /dev/atarimouse Atari mouse
254 6 = /dev/sunmouse Sun mouse
255 7 = /dev/amigamouse1 Second Amiga mouse
256 8 = /dev/smouse Simple serial mouse driver
257 9 = /dev/pc110pad IBM PC-110 digitizer pad
258 10 = /dev/adbmouse Apple Desktop Bus mouse
259 11 = /dev/vrtpanel Vr41xx embedded touch panel
260 13 = /dev/vpcmouse Connectix Virtual PC Mouse
261 14 = /dev/touchscreen/ucb1x00 UCB 1x00 touchscreen
262 15 = /dev/touchscreen/mk712 MK712 touchscreen
263 128 = /dev/beep Fancy beep device
264 129 =
265 130 = /dev/watchdog Watchdog timer port
266 131 = /dev/temperature Machine internal temperature
267 132 = /dev/hwtrap Hardware fault trap
268 133 = /dev/exttrp External device trap
269 134 = /dev/apm_bios Advanced Power Management BIOS
270 135 = /dev/rtc Real Time Clock
271 137 = /dev/vhci Bluetooth virtual HCI driver
272 139 = /dev/openprom SPARC OpenBoot PROM
273 140 = /dev/relay8 Berkshire Products Octal relay card
274 141 = /dev/relay16 Berkshire Products ISO-16 relay card
275 142 =
276 143 = /dev/pciconf PCI configuration space
277 144 = /dev/nvram Non-volatile configuration RAM
278 145 = /dev/hfmodem Soundcard shortwave modem control
279 146 = /dev/graphics Linux/SGI graphics device
280 147 = /dev/opengl Linux/SGI OpenGL pipe
281 148 = /dev/gfx Linux/SGI graphics effects device
282 149 = /dev/input/mouse Linux/SGI Irix emulation mouse
283 150 = /dev/input/keyboard Linux/SGI Irix emulation keyboard
284 151 = /dev/led Front panel LEDs
285 152 = /dev/kpoll Kernel Poll Driver
286 153 = /dev/mergemem Memory merge device
287 154 = /dev/pmu Macintosh PowerBook power manager
288 155 = /dev/isictl MultiTech ISICom serial control
289 156 = /dev/lcd Front panel LCD display
290 157 = /dev/ac Applicom Intl Profibus card
291 158 = /dev/nwbutton Netwinder external button
292 159 = /dev/nwdebug Netwinder debug interface
293 160 = /dev/nwflash Netwinder flash memory
294 161 = /dev/userdma User-space DMA access
295 162 = /dev/smbus System Management Bus
296 163 = /dev/lik Logitech Internet Keyboard
297 164 = /dev/ipmo Intel Intelligent Platform Management
298 165 = /dev/vmmon VMware virtual machine monitor
299 166 = /dev/i2o/ctl I2O configuration manager
300 167 = /dev/specialix_sxctl Specialix serial control
301 168 = /dev/tcldrv Technology Concepts serial control
302 169 = /dev/specialix_rioctl Specialix RIO serial control
303 170 = /dev/thinkpad/thinkpad IBM Thinkpad devices
304 171 = /dev/srripc QNX4 API IPC manager
305 172 = /dev/usemaclone Semaphore clone device
306 173 = /dev/ipmikcs Intelligent Platform Management
307 174 = /dev/uctrl SPARCbook 3 microcontroller
308 175 = /dev/agpgart AGP Graphics Address Remapping Table
309 176 = /dev/gtrsc Gorgy Timing radio clock
310 177 = /dev/cbm Serial CBM bus
311 178 = /dev/jsflash JavaStation OS flash SIMM
312 179 = /dev/xsvc High-speed shared-mem/semaphore service
313 180 = /dev/vrbuttons Vr41xx button input device
314 181 = /dev/toshiba Toshiba laptop SMM support
315 182 = /dev/perfctr Performance-monitoring counters
316 183 = /dev/hwrng Generic random number generator
317 184 = /dev/cpu/microcode CPU microcode update interface
318 186 = /dev/atomicps Atomic shapshot of process state data
319 187 = /dev/irnet IrNET device
320 188 = /dev/smbusbios SMBus BIOS
321 189 = /dev/ussp_ctl User space serial port control
322 190 = /dev/crash Mission Critical Linux crash dump facility
323 191 = /dev/pcl181 <information missing>
324 192 = /dev/nas_xbus NAS xbus LCD/buttons access
325 193 = /dev/d7s SPARC 7-segment display
326 194 = /dev/zkshim Zero-Knowledge network shim control
327 195 = /dev/elographics/e2201 Elographics touchscreen E271-2201
328 196 = /dev/vfio/vfio VFIO userspace driver interface
329 197 = /dev/pxa3xx-gcu PXA3xx graphics controller unit driver
330 198 = /dev/sexec Signed executable interface
331 199 = /dev/scanners/cuecat :CueCat barcode scanner
332 200 = /dev/net/tun TAP/TUN network device
333 201 = /dev/button/gulpb Transmeta GULP-B buttons
334 202 = /dev/emd/ctl Enhanced Metadisk RAID (EMD) control
335 203 = /dev/cuse Cuse (character device in user-space)
336 204 = /dev/video/em8300 EM8300 DVD decoder control
337 205 = /dev/video/em8300_mv EM8300 DVD decoder video
338 206 = /dev/video/em8300_ma EM8300 DVD decoder audio
339 207 = /dev/video/em8300_sp EM8300 DVD decoder subpicture
340 208 = /dev/compaq/cpqphpc Compaq PCI Hot Plug Controller
341 209 = /dev/compaq/cpqrid Compaq Remote Insight Driver
342 210 = /dev/impi/bt IMPI coprocessor block transfer
343 211 = /dev/impi/smic IMPI coprocessor stream interface
344 212 = /dev/watchdogs/0 First watchdog device
345 213 = /dev/watchdogs/1 Second watchdog device
346 214 = /dev/watchdogs/2 Third watchdog device
347 215 = /dev/watchdogs/3 Fourth watchdog device
348 216 = /dev/fujitsu/apanel Fujitsu/Siemens application panel
349 217 = /dev/ni/natmotn National Instruments Motion
350 218 = /dev/kchuid Inter-process chuid control
351 219 = /dev/modems/mwave MWave modem firmware upload
352 220 = /dev/mptctl Message passing technology (MPT) control
353 221 = /dev/mvista/hssdsi Montavista PICMG hot swap system driver
354 222 = /dev/mvista/hasi Montavista PICMG high availability
355 223 = /dev/input/uinput User level driver support for input
356 224 = /dev/tpm TCPA TPM driver
357 225 = /dev/pps Pulse Per Second driver
358 226 = /dev/systrace Systrace device
359 227 = /dev/mcelog X86_64 Machine Check Exception driver
360 228 = /dev/hpet HPET driver
361 229 = /dev/fuse Fuse (virtual filesystem in user-space)
362 230 = /dev/midishare MidiShare driver
363 231 = /dev/snapshot System memory snapshot device
364 232 = /dev/kvm Kernel-based virtual machine (hardware virtualization extensions)
365 233 = /dev/kmview View-OS A process with a view
366 234 = /dev/btrfs-control Btrfs control device
367 235 = /dev/autofs Autofs control device
368 236 = /dev/mapper/control Device-Mapper control device
369 237 = /dev/loop-control Loopback control device
370 238 = /dev/vhost-net Host kernel accelerator for virtio net
371 239 = /dev/uhid User-space I/O driver support for HID subsystem
372 240 = /dev/userio Serio driver testing device
373 241 = /dev/vhost-vsock Host kernel driver for virtio vsock
375 242-254 Reserved for local use
376 255 Reserved for MISC_DYNAMIC_MINOR
378 11 char Raw keyboard device (Linux/SPARC only)
379 0 = /dev/kbd Raw keyboard device
381 11 char Serial Mux device (Linux/PA-RISC only)
382 0 = /dev/ttyB0 First mux port
383 1 = /dev/ttyB1 Second mux port
384 ...
386 11 block SCSI CD-ROM devices
387 0 = /dev/scd0 First SCSI CD-ROM
388 1 = /dev/scd1 Second SCSI CD-ROM
389 ...
391 The prefix /dev/sr (instead of /dev/scd) has been deprecated.
393 12 char QIC-02 tape
394 2 = /dev/ntpqic11 QIC-11, no rewind-on-close
395 3 = /dev/tpqic11 QIC-11, rewind-on-close
396 4 = /dev/ntpqic24 QIC-24, no rewind-on-close
397 5 = /dev/tpqic24 QIC-24, rewind-on-close
398 6 = /dev/ntpqic120 QIC-120, no rewind-on-close
399 7 = /dev/tpqic120 QIC-120, rewind-on-close
400 8 = /dev/ntpqic150 QIC-150, no rewind-on-close
401 9 = /dev/tpqic150 QIC-150, rewind-on-close
403 The device names specified are proposed -- if there
404 are "standard" names for these devices, please let me know.
406 12 block
408 13 char Input core
409 0 = /dev/input/js0 First joystick
410 1 = /dev/input/js1 Second joystick
411 ...
412 32 = /dev/input/mouse0 First mouse
413 33 = /dev/input/mouse1 Second mouse
414 ...
415 63 = /dev/input/mice Unified mouse
416 64 = /dev/input/event0 First event queue
417 65 = /dev/input/event1 Second event queue
418 ...
420 Each device type has 5 bits (32 minors).
422 13 block Previously used for the XT disk (/dev/xdN)
423 Deleted in kernel v3.9.
425 14 char Open Sound System (OSS)
426 0 = /dev/mixer Mixer control
427 1 = /dev/sequencer Audio sequencer
428 2 = /dev/midi00 First MIDI port
429 3 = /dev/dsp Digital audio
430 4 = /dev/audio Sun-compatible digital audio
431 6 =
432 7 = /dev/audioctl SPARC audio control device
433 8 = /dev/sequencer2 Sequencer -- alternate device
434 16 = /dev/mixer1 Second soundcard mixer control
435 17 = /dev/patmgr0 Sequencer patch manager
436 18 = /dev/midi01 Second MIDI port
437 19 = /dev/dsp1 Second soundcard digital audio
438 20 = /dev/audio1 Second soundcard Sun digital audio
439 33 = /dev/patmgr1 Sequencer patch manager
440 34 = /dev/midi02 Third MIDI port
441 50 = /dev/midi03 Fourth MIDI port
443 14 block
445 15 char Joystick
446 0 = /dev/js0 First analog joystick
447 1 = /dev/js1 Second analog joystick
448 ...
449 128 = /dev/djs0 First digital joystick
450 129 = /dev/djs1 Second digital joystick
451 ...
452 15 block Sony CDU-31A/CDU-33A CD-ROM
453 0 = /dev/sonycd Sony CDU-31a CD-ROM
455 16 char Non-SCSI scanners
456 0 = /dev/gs4500 Genius 4500 handheld scanner
458 16 block GoldStar CD-ROM
459 0 = /dev/gscd GoldStar CD-ROM
461 17 char OBSOLETE (was Chase serial card)
462 0 = /dev/ttyH0 First Chase port
463 1 = /dev/ttyH1 Second Chase port
464 ...
465 17 block Optics Storage CD-ROM
466 0 = /dev/optcd Optics Storage CD-ROM
468 18 char OBSOLETE (was Chase serial card - alternate devices)
469 0 = /dev/cuh0 Callout device for ttyH0
470 1 = /dev/cuh1 Callout device for ttyH1
471 ...
472 18 block Sanyo CD-ROM
473 0 = /dev/sjcd Sanyo CD-ROM
475 19 char Cyclades serial card
476 0 = /dev/ttyC0 First Cyclades port
477 ...
478 31 = /dev/ttyC31 32nd Cyclades port
480 19 block "Double" compressed disk
481 0 = /dev/double0 First compressed disk
482 ...
483 7 = /dev/double7 Eighth compressed disk
484 128 = /dev/cdouble0 Mirror of first compressed disk
485 ...
486 135 = /dev/cdouble7 Mirror of eighth compressed disk
488 See the Double documentation for the meaning of the
489 mirror devices.
491 20 char Cyclades serial card - alternate devices
492 0 = /dev/cub0 Callout device for ttyC0
493 ...
494 31 = /dev/cub31 Callout device for ttyC31
496 20 block Hitachi CD-ROM (under development)
497 0 = /dev/hitcd Hitachi CD-ROM
499 21 char Generic SCSI access
500 0 = /dev/sg0 First generic SCSI device
501 1 = /dev/sg1 Second generic SCSI device
502 ...
504 Most distributions name these /dev/sga, /dev/sgb...;
505 this sets an unnecessary limit of 26 SCSI devices in
506 the system and is counter to standard Linux
507 device-naming practice.
509 21 block Acorn MFM hard drive interface
510 0 = /dev/mfma First MFM drive whole disk
511 64 = /dev/mfmb Second MFM drive whole disk
513 This device is used on the ARM-based Acorn RiscPC.
514 Partitions are handled the same way as for IDE disks
515 (see major number 3).
517 22 char Digiboard serial card
518 0 = /dev/ttyD0 First Digiboard port
519 1 = /dev/ttyD1 Second Digiboard port
520 ...
521 22 block Second IDE hard disk/CD-ROM interface
522 0 = /dev/hdc Master: whole disk (or CD-ROM)
523 64 = /dev/hdd Slave: whole disk (or CD-ROM)
525 Partitions are handled the same way as for the first
526 interface (see major number 3).
528 23 char Digiboard serial card - alternate devices
529 0 = /dev/cud0 Callout device for ttyD0
530 1 = /dev/cud1 Callout device for ttyD1
531 ...
532 23 block Mitsumi proprietary CD-ROM
533 0 = /dev/mcd Mitsumi CD-ROM
535 24 char Stallion serial card
536 0 = /dev/ttyE0 Stallion port 0 card 0
537 1 = /dev/ttyE1 Stallion port 1 card 0
538 ...
539 64 = /dev/ttyE64 Stallion port 0 card 1
540 65 = /dev/ttyE65 Stallion port 1 card 1
541 ...
542 128 = /dev/ttyE128 Stallion port 0 card 2
543 129 = /dev/ttyE129 Stallion port 1 card 2
544 ...
545 192 = /dev/ttyE192 Stallion port 0 card 3
546 193 = /dev/ttyE193 Stallion port 1 card 3
547 ...
548 24 block Sony CDU-535 CD-ROM
549 0 = /dev/cdu535 Sony CDU-535 CD-ROM
551 25 char Stallion serial card - alternate devices
552 0 = /dev/cue0 Callout device for ttyE0
553 1 = /dev/cue1 Callout device for ttyE1
554 ...
555 64 = /dev/cue64 Callout device for ttyE64
556 65 = /dev/cue65 Callout device for ttyE65
557 ...
558 128 = /dev/cue128 Callout device for ttyE128
559 129 = /dev/cue129 Callout device for ttyE129
560 ...
561 192 = /dev/cue192 Callout device for ttyE192
562 193 = /dev/cue193 Callout device for ttyE193
563 ...
564 25 block First Matsushita (Panasonic/SoundBlaster) CD-ROM
565 0 = /dev/sbpcd0 Panasonic CD-ROM controller 0 unit 0
566 1 = /dev/sbpcd1 Panasonic CD-ROM controller 0 unit 1
567 2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2
568 3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3
570 26 char
572 26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM
573 0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0
574 1 = /dev/sbpcd5 Panasonic CD-ROM controller 1 unit 1
575 2 = /dev/sbpcd6 Panasonic CD-ROM controller 1 unit 2
576 3 = /dev/sbpcd7 Panasonic CD-ROM controller 1 unit 3
578 27 char QIC-117 tape
579 0 = /dev/qft0 Unit 0, rewind-on-close
580 1 = /dev/qft1 Unit 1, rewind-on-close
581 2 = /dev/qft2 Unit 2, rewind-on-close
582 3 = /dev/qft3 Unit 3, rewind-on-close
583 4 = /dev/nqft0 Unit 0, no rewind-on-close
584 5 = /dev/nqft1 Unit 1, no rewind-on-close
585 6 = /dev/nqft2 Unit 2, no rewind-on-close
586 7 = /dev/nqft3 Unit 3, no rewind-on-close
587 16 = /dev/zqft0 Unit 0, rewind-on-close, compression
588 17 = /dev/zqft1 Unit 1, rewind-on-close, compression
589 18 = /dev/zqft2 Unit 2, rewind-on-close, compression
590 19 = /dev/zqft3 Unit 3, rewind-on-close, compression
591 20 = /dev/nzqft0 Unit 0, no rewind-on-close, compression
592 21 = /dev/nzqft1 Unit 1, no rewind-on-close, compression
593 22 = /dev/nzqft2 Unit 2, no rewind-on-close, compression
594 23 = /dev/nzqft3 Unit 3, no rewind-on-close, compression
595 32 = /dev/rawqft0 Unit 0, rewind-on-close, no file marks
596 33 = /dev/rawqft1 Unit 1, rewind-on-close, no file marks
597 34 = /dev/rawqft2 Unit 2, rewind-on-close, no file marks
598 35 = /dev/rawqft3 Unit 3, rewind-on-close, no file marks
599 36 = /dev/nrawqft0 Unit 0, no rewind-on-close, no file marks
600 37 = /dev/nrawqft1 Unit 1, no rewind-on-close, no file marks
601 38 = /dev/nrawqft2 Unit 2, no rewind-on-close, no file marks
602 39 = /dev/nrawqft3 Unit 3, no rewind-on-close, no file marks
604 27 block Third Matsushita (Panasonic/SoundBlaster) CD-ROM
605 0 = /dev/sbpcd8 Panasonic CD-ROM controller 2 unit 0
606 1 = /dev/sbpcd9 Panasonic CD-ROM controller 2 unit 1
607 2 = /dev/sbpcd10 Panasonic CD-ROM controller 2 unit 2
608 3 = /dev/sbpcd11 Panasonic CD-ROM controller 2 unit 3
610 28 char Stallion serial card - card programming
611 0 = /dev/staliomem0 First Stallion card I/O memory
612 1 = /dev/staliomem1 Second Stallion card I/O memory
613 2 = /dev/staliomem2 Third Stallion card I/O memory
614 3 = /dev/staliomem3 Fourth Stallion card I/O memory
616 28 char Atari SLM ACSI laser printer (68k/Atari)
617 0 = /dev/slm0 First SLM laser printer
618 1 = /dev/slm1 Second SLM laser printer
619 ...
620 28 block Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
621 0 = /dev/sbpcd12 Panasonic CD-ROM controller 3 unit 0
622 1 = /dev/sbpcd13 Panasonic CD-ROM controller 3 unit 1
623 2 = /dev/sbpcd14 Panasonic CD-ROM controller 3 unit 2
624 3 = /dev/sbpcd15 Panasonic CD-ROM controller 3 unit 3
626 28 block ACSI disk (68k/Atari)
627 0 = /dev/ada First ACSI disk whole disk
628 16 = /dev/adb Second ACSI disk whole disk
629 32 = /dev/adc Third ACSI disk whole disk
630 ...
631 240 = /dev/adp 16th ACSI disk whole disk
633 Partitions are handled in the same way as for IDE
634 disks (see major number 3) except that the limit on
635 partitions is 15, like SCSI.
637 29 char Universal frame buffer
638 0 = /dev/fb0 First frame buffer
639 1 = /dev/fb1 Second frame buffer
640 ...
641 31 = /dev/fb31 32nd frame buffer
643 29 block Aztech/Orchid/Okano/Wearnes CD-ROM
644 0 = /dev/aztcd Aztech CD-ROM
646 30 char iBCS-2 compatibility devices
647 0 = /dev/socksys Socket access
648 1 = /dev/spx SVR3 local X interface
649 32 = /dev/inet/ip Network access
650 33 = /dev/inet/icmp
651 34 = /dev/inet/ggp
652 35 = /dev/inet/ipip
653 36 = /dev/inet/tcp
654 37 = /dev/inet/egp
655 38 = /dev/inet/pup
656 39 = /dev/inet/udp
657 40 = /dev/inet/idp
658 41 = /dev/inet/rawip
660 Additionally, iBCS-2 requires the following links:
662 /dev/ip -> /dev/inet/ip
663 /dev/icmp -> /dev/inet/icmp
664 /dev/ggp -> /dev/inet/ggp
665 /dev/ipip -> /dev/inet/ipip
666 /dev/tcp -> /dev/inet/tcp
667 /dev/egp -> /dev/inet/egp
668 /dev/pup -> /dev/inet/pup
669 /dev/udp -> /dev/inet/udp
670 /dev/idp -> /dev/inet/idp
671 /dev/rawip -> /dev/inet/rawip
672 /dev/inet/arp -> /dev/inet/udp
673 /dev/inet/rip -> /dev/inet/udp
674 /dev/nfsd -> /dev/socksys
675 /dev/X0R -> /dev/null (? apparently not required ?)
677 30 block Philips LMS CM-205 CD-ROM
678 0 = /dev/cm205cd Philips LMS CM-205 CD-ROM
680 /dev/lmscd is an older name for this device. This
681 driver does not work with the CM-205MS CD-ROM.
683 31 char MPU-401 MIDI
684 0 = /dev/mpu401data MPU-401 data port
685 1 = /dev/mpu401stat MPU-401 status port
687 31 block ROM/flash memory card
688 0 = /dev/rom0 First ROM card (rw)
689 ...
690 7 = /dev/rom7 Eighth ROM card (rw)
691 8 = /dev/rrom0 First ROM card (ro)
692 ...
693 15 = /dev/rrom7 Eighth ROM card (ro)
694 16 = /dev/flash0 First flash memory card (rw)
695 ...
696 23 = /dev/flash7 Eighth flash memory card (rw)
697 24 = /dev/rflash0 First flash memory card (ro)
698 ...
699 31 = /dev/rflash7 Eighth flash memory card (ro)
701 The read-write (rw) devices support back-caching
702 written data in RAM, as well as writing to flash RAM
703 devices. The read-only devices (ro) support reading
704 only.
706 32 char Specialix serial card
707 0 = /dev/ttyX0 First Specialix port
708 1 = /dev/ttyX1 Second Specialix port
709 ...
710 32 block Philips LMS CM-206 CD-ROM
711 0 = /dev/cm206cd Philips LMS CM-206 CD-ROM
713 33 char Specialix serial card - alternate devices
714 0 = /dev/cux0 Callout device for ttyX0
715 1 = /dev/cux1 Callout device for ttyX1
716 ...
717 33 block Third IDE hard disk/CD-ROM interface
718 0 = /dev/hde Master: whole disk (or CD-ROM)
719 64 = /dev/hdf Slave: whole disk (or CD-ROM)
721 Partitions are handled the same way as for the first
722 interface (see major number 3).
724 34 char Z8530 HDLC driver
725 0 = /dev/scc0 First Z8530, first port
726 1 = /dev/scc1 First Z8530, second port
727 2 = /dev/scc2 Second Z8530, first port
728 3 = /dev/scc3 Second Z8530, second port
729 ...
731 In a previous version these devices were named
732 /dev/sc1 for /dev/scc0, /dev/sc2 for /dev/scc1, and so
733 on.
735 34 block Fourth IDE hard disk/CD-ROM interface
736 0 = /dev/hdg Master: whole disk (or CD-ROM)
737 64 = /dev/hdh Slave: whole disk (or CD-ROM)
739 Partitions are handled the same way as for the first
740 interface (see major number 3).
742 35 char tclmidi MIDI driver
743 0 = /dev/midi0 First MIDI port, kernel timed
744 1 = /dev/midi1 Second MIDI port, kernel timed
745 2 = /dev/midi2 Third MIDI port, kernel timed
746 3 = /dev/midi3 Fourth MIDI port, kernel timed
747 64 = /dev/rmidi0 First MIDI port, untimed
748 65 = /dev/rmidi1 Second MIDI port, untimed
749 66 = /dev/rmidi2 Third MIDI port, untimed
750 67 = /dev/rmidi3 Fourth MIDI port, untimed
751 128 = /dev/smpte0 First MIDI port, SMPTE timed
752 129 = /dev/smpte1 Second MIDI port, SMPTE timed
753 130 = /dev/smpte2 Third MIDI port, SMPTE timed
754 131 = /dev/smpte3 Fourth MIDI port, SMPTE timed
756 35 block Slow memory ramdisk
757 0 = /dev/slram Slow memory ramdisk
759 36 char Netlink support
760 0 = /dev/route Routing, device updates, kernel to user
761 1 = /dev/skip enSKIP security cache control
762 3 = /dev/fwmonitor Firewall packet copies
763 16 = /dev/tap0 First Ethertap device
764 ...
765 31 = /dev/tap15 16th Ethertap device
767 36 block OBSOLETE (was MCA ESDI hard disk)
769 37 char IDE tape
770 0 = /dev/ht0 First IDE tape
771 1 = /dev/ht1 Second IDE tape
772 ...
773 128 = /dev/nht0 First IDE tape, no rewind-on-close
774 129 = /dev/nht1 Second IDE tape, no rewind-on-close
775 ...
777 Currently, only one IDE tape drive is supported.
779 37 block Zorro II ramdisk
780 0 = /dev/z2ram Zorro II ramdisk
782 38 char Myricom PCI Myrinet board
783 0 = /dev/mlanai0 First Myrinet board
784 1 = /dev/mlanai1 Second Myrinet board
785 ...
787 This device is used for status query, board control
788 and "user level packet I/O." This board is also
789 accessible as a standard networking "eth" device.
791 38 block OBSOLETE (was Linux/AP+)
793 39 char ML-16P experimental I/O board
794 0 = /dev/ml16pa-a0 First card, first analog channel
795 1 = /dev/ml16pa-a1 First card, second analog channel
796 ...
797 15 = /dev/ml16pa-a15 First card, 16th analog channel
798 16 = /dev/ml16pa-d First card, digital lines
799 17 = /dev/ml16pa-c0 First card, first counter/timer
800 18 = /dev/ml16pa-c1 First card, second counter/timer
801 19 = /dev/ml16pa-c2 First card, third counter/timer
802 32 = /dev/ml16pb-a0 Second card, first analog channel
803 33 = /dev/ml16pb-a1 Second card, second analog channel
804 ...
805 47 = /dev/ml16pb-a15 Second card, 16th analog channel
806 48 = /dev/ml16pb-d Second card, digital lines
807 49 = /dev/ml16pb-c0 Second card, first counter/timer
808 50 = /dev/ml16pb-c1 Second card, second counter/timer
809 51 = /dev/ml16pb-c2 Second card, third counter/timer
810 ...
811 39 block
813 40 char
815 40 block
817 41 char Yet Another Micro Monitor
818 0 = /dev/yamm Yet Another Micro Monitor
820 41 block
822 42 char Demo/sample use
824 42 block Demo/sample use
826 This number is intended for use in sample code, as
827 well as a general "example" device number. It
828 should never be used for a device driver that is being
829 distributed; either obtain an official number or use
830 the local/experimental range. The sudden addition or
831 removal of a driver with this number should not cause
832 ill effects to the system (bugs excepted.)
834 IN PARTICULAR, ANY DISTRIBUTION WHICH CONTAINS A
835 DEVICE DRIVER USING MAJOR NUMBER 42 IS NONCOMPLIANT.
837 43 char isdn4linux virtual modem
838 0 = /dev/ttyI0 First virtual modem
839 ...
840 63 = /dev/ttyI63 64th virtual modem
842 43 block Network block devices
843 0 = /dev/nb0 First network block device
844 1 = /dev/nb1 Second network block device
845 ...
847 Network Block Device is somehow similar to loopback
848 devices: If you read from it, it sends packet across
849 network asking server for data. If you write to it, it
850 sends packet telling server to write. It could be used
851 to mounting filesystems over the net, swapping over
852 the net, implementing block device in userland etc.
854 44 char isdn4linux virtual modem - alternate devices
855 0 = /dev/cui0 Callout device for ttyI0
856 ...
857 63 = /dev/cui63 Callout device for ttyI63
859 44 block Flash Translation Layer (FTL) filesystems
860 0 = /dev/ftla FTL on first Memory Technology Device
861 16 = /dev/ftlb FTL on second Memory Technology Device
862 32 = /dev/ftlc FTL on third Memory Technology Device
863 ...
864 240 = /dev/ftlp FTL on 16th Memory Technology Device
866 Partitions are handled in the same way as for IDE
867 disks (see major number 3) except that the partition
868 limit is 15 rather than 63 per disk (same as SCSI.)
870 45 char isdn4linux ISDN BRI driver
871 0 = /dev/isdn0 First virtual B channel raw data
872 ...
873 63 = /dev/isdn63 64th virtual B channel raw data
874 64 = /dev/isdnctrl0 First channel control/debug
875 ...
876 127 = /dev/isdnctrl63 64th channel control/debug
878 128 = /dev/ippp0 First SyncPPP device
879 ...
880 191 = /dev/ippp63 64th SyncPPP device
882 255 = /dev/isdninfo ISDN monitor interface
884 45 block Parallel port IDE disk devices
885 0 = /dev/pda First parallel port IDE disk
886 16 = /dev/pdb Second parallel port IDE disk
887 32 = /dev/pdc Third parallel port IDE disk
888 48 = /dev/pdd Fourth parallel port IDE disk
890 Partitions are handled in the same way as for IDE
891 disks (see major number 3) except that the partition
892 limit is 15 rather than 63 per disk.
894 46 char Comtrol Rocketport serial card
895 0 = /dev/ttyR0 First Rocketport port
896 1 = /dev/ttyR1 Second Rocketport port
897 ...
898 46 block Parallel port ATAPI CD-ROM devices
899 0 = /dev/pcd0 First parallel port ATAPI CD-ROM
900 1 = /dev/pcd1 Second parallel port ATAPI CD-ROM
901 2 = /dev/pcd2 Third parallel port ATAPI CD-ROM
902 3 = /dev/pcd3 Fourth parallel port ATAPI CD-ROM
904 47 char Comtrol Rocketport serial card - alternate devices
905 0 = /dev/cur0 Callout device for ttyR0
906 1 = /dev/cur1 Callout device for ttyR1
907 ...
908 47 block Parallel port ATAPI disk devices
909 0 = /dev/pf0 First parallel port ATAPI disk
910 1 = /dev/pf1 Second parallel port ATAPI disk
911 2 = /dev/pf2 Third parallel port ATAPI disk
912 3 = /dev/pf3 Fourth parallel port ATAPI disk
914 This driver is intended for floppy disks and similar
915 devices and hence does not support partitioning.
917 48 char SDL RISCom serial card
918 0 = /dev/ttyL0 First RISCom port
919 1 = /dev/ttyL1 Second RISCom port
920 ...
921 48 block Mylex DAC960 PCI RAID controller; first controller
922 0 = /dev/rd/c0d0 First disk, whole disk
923 8 = /dev/rd/c0d1 Second disk, whole disk
924 ...
925 248 = /dev/rd/c0d31 32nd disk, whole disk
927 For partitions add:
928 0 = /dev/rd/c?d? Whole disk
929 1 = /dev/rd/c?d?p1 First partition
930 ...
931 7 = /dev/rd/c?d?p7 Seventh partition
933 49 char SDL RISCom serial card - alternate devices
934 0 = /dev/cul0 Callout device for ttyL0
935 1 = /dev/cul1 Callout device for ttyL1
936 ...
937 49 block Mylex DAC960 PCI RAID controller; second controller
938 0 = /dev/rd/c1d0 First disk, whole disk
939 8 = /dev/rd/c1d1 Second disk, whole disk
940 ...
941 248 = /dev/rd/c1d31 32nd disk, whole disk
943 Partitions are handled as for major 48.
945 50 char Reserved for GLINT
947 50 block Mylex DAC960 PCI RAID controller; third controller
948 0 = /dev/rd/c2d0 First disk, whole disk
949 8 = /dev/rd/c2d1 Second disk, whole disk
950 ...
951 248 = /dev/rd/c2d31 32nd disk, whole disk
953 51 char Baycom radio modem OR Radio Tech BIM-XXX-RS232 radio modem
954 0 = /dev/bc0 First Baycom radio modem
955 1 = /dev/bc1 Second Baycom radio modem
956 ...
957 51 block Mylex DAC960 PCI RAID controller; fourth controller
958 0 = /dev/rd/c3d0 First disk, whole disk
959 8 = /dev/rd/c3d1 Second disk, whole disk
960 ...
961 248 = /dev/rd/c3d31 32nd disk, whole disk
963 Partitions are handled as for major 48.
965 52 char Spellcaster DataComm/BRI ISDN card
966 0 = /dev/dcbri0 First DataComm card
967 1 = /dev/dcbri1 Second DataComm card
968 2 = /dev/dcbri2 Third DataComm card
969 3 = /dev/dcbri3 Fourth DataComm card
971 52 block Mylex DAC960 PCI RAID controller; fifth controller
972 0 = /dev/rd/c4d0 First disk, whole disk
973 8 = /dev/rd/c4d1 Second disk, whole disk
974 ...
975 248 = /dev/rd/c4d31 32nd disk, whole disk
977 Partitions are handled as for major 48.
979 53 char BDM interface for remote debugging MC683xx microcontrollers
980 0 = /dev/pd_bdm0 PD BDM interface on lp0
981 1 = /dev/pd_bdm1 PD BDM interface on lp1
982 2 = /dev/pd_bdm2 PD BDM interface on lp2
983 4 = /dev/icd_bdm0 ICD BDM interface on lp0
984 5 = /dev/icd_bdm1 ICD BDM interface on lp1
985 6 = /dev/icd_bdm2 ICD BDM interface on lp2
987 This device is used for the interfacing to the MC683xx
988 microcontrollers via Background Debug Mode by use of a
989 Parallel Port interface. PD is the Motorola Public
990 Domain Interface and ICD is the commercial interface
991 by P&E.
993 53 block Mylex DAC960 PCI RAID controller; sixth controller
994 0 = /dev/rd/c5d0 First disk, whole disk
995 8 = /dev/rd/c5d1 Second disk, whole disk
996 ...
997 248 = /dev/rd/c5d31 32nd disk, whole disk
999 Partitions are handled as for major 48.
1001 54 char Electrocardiognosis Holter serial card
1002 0 = /dev/holter0 First Holter port
1003 1 = /dev/holter1 Second Holter port
1004 2 = /dev/holter2 Third Holter port
1006 A custom serial card used by Electrocardiognosis SRL
1007 <mseritan@ottonel.pub.ro> to transfer data from Holter
1008 24-hour heart monitoring equipment.
1010 54 block Mylex DAC960 PCI RAID controller; seventh controller
1011 0 = /dev/rd/c6d0 First disk, whole disk
1012 8 = /dev/rd/c6d1 Second disk, whole disk
1013 ...
1014 248 = /dev/rd/c6d31 32nd disk, whole disk
1016 Partitions are handled as for major 48.
1018 55 char DSP56001 digital signal processor
1019 0 = /dev/dsp56k First DSP56001
1021 55 block Mylex DAC960 PCI RAID controller; eighth controller
1022 0 = /dev/rd/c7d0 First disk, whole disk
1023 8 = /dev/rd/c7d1 Second disk, whole disk
1024 ...
1025 248 = /dev/rd/c7d31 32nd disk, whole disk
1027 Partitions are handled as for major 48.
1029 56 char Apple Desktop Bus
1030 0 = /dev/adb ADB bus control
1032 Additional devices will be added to this number, all
1033 starting with /dev/adb.
1035 56 block Fifth IDE hard disk/CD-ROM interface
1036 0 = /dev/hdi Master: whole disk (or CD-ROM)
1037 64 = /dev/hdj Slave: whole disk (or CD-ROM)
1039 Partitions are handled the same way as for the first
1040 interface (see major number 3).
1042 57 char Hayes ESP serial card
1043 0 = /dev/ttyP0 First ESP port
1044 1 = /dev/ttyP1 Second ESP port
1045 ...
1047 57 block Sixth IDE hard disk/CD-ROM interface
1048 0 = /dev/hdk Master: whole disk (or CD-ROM)
1049 64 = /dev/hdl Slave: whole disk (or CD-ROM)
1051 Partitions are handled the same way as for the first
1052 interface (see major number 3).
1054 58 char Hayes ESP serial card - alternate devices
1055 0 = /dev/cup0 Callout device for ttyP0
1056 1 = /dev/cup1 Callout device for ttyP1
1057 ...
1059 58 block Reserved for logical volume manager
1061 59 char sf firewall package
1062 0 = /dev/firewall Communication with sf kernel module
1064 59 block Generic PDA filesystem device
1065 0 = /dev/pda0 First PDA device
1066 1 = /dev/pda1 Second PDA device
1067 ...
1069 The pda devices are used to mount filesystems on
1070 remote pda's (basically slow handheld machines with
1071 proprietary OS's and limited memory and storage
1072 running small fs translation drivers) through serial /
1073 IRDA / parallel links.
1075 NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
1077 60-63 char LOCAL/EXPERIMENTAL USE
1079 60-63 block LOCAL/EXPERIMENTAL USE
1080 Allocated for local/experimental use. For devices not
1081 assigned official numbers, these ranges should be
1082 used in order to avoid conflicting with future assignments.
1084 64 char ENskip kernel encryption package
1085 0 = /dev/enskip Communication with ENskip kernel module
1087 64 block Scramdisk/DriveCrypt encrypted devices
1088 0 = /dev/scramdisk/master Master node for ioctls
1089 1 = /dev/scramdisk/1 First encrypted device
1090 2 = /dev/scramdisk/2 Second encrypted device
1091 ...
1092 255 = /dev/scramdisk/255 255th encrypted device
1094 The filename of the encrypted container and the passwords
1095 are sent via ioctls (using the sdmount tool) to the master
1096 node which then activates them via one of the
1097 /dev/scramdisk/x nodes for loop mounting (all handled
1098 through the sdmount tool).
1100 Requested by: andy@scramdisklinux.org
1102 65 char Sundance "plink" Transputer boards (obsolete, unused)
1103 0 = /dev/plink0 First plink device
1104 1 = /dev/plink1 Second plink device
1105 2 = /dev/plink2 Third plink device
1106 3 = /dev/plink3 Fourth plink device
1107 64 = /dev/rplink0 First plink device, raw
1108 65 = /dev/rplink1 Second plink device, raw
1109 66 = /dev/rplink2 Third plink device, raw
1110 67 = /dev/rplink3 Fourth plink device, raw
1111 128 = /dev/plink0d First plink device, debug
1112 129 = /dev/plink1d Second plink device, debug
1113 130 = /dev/plink2d Third plink device, debug
1114 131 = /dev/plink3d Fourth plink device, debug
1115 192 = /dev/rplink0d First plink device, raw, debug
1116 193 = /dev/rplink1d Second plink device, raw, debug
1117 194 = /dev/rplink2d Third plink device, raw, debug
1118 195 = /dev/rplink3d Fourth plink device, raw, debug
1120 This is a commercial driver; contact James Howes
1121 <jth@prosig.demon.co.uk> for information.
1123 65 block SCSI disk devices (16-31)
1124 0 = /dev/sdq 17th SCSI disk whole disk
1125 16 = /dev/sdr 18th SCSI disk whole disk
1126 32 = /dev/sds 19th SCSI disk whole disk
1127 ...
1128 240 = /dev/sdaf 32nd SCSI disk whole disk
1130 Partitions are handled in the same way as for IDE
1131 disks (see major number 3) except that the limit on
1132 partitions is 15.
1134 66 char YARC PowerPC PCI coprocessor card
1135 0 = /dev/yppcpci0 First YARC card
1136 1 = /dev/yppcpci1 Second YARC card
1137 ...
1139 66 block SCSI disk devices (32-47)
1140 0 = /dev/sdag 33th SCSI disk whole disk
1141 16 = /dev/sdah 34th SCSI disk whole disk
1142 32 = /dev/sdai 35th SCSI disk whole disk
1143 ...
1144 240 = /dev/sdav 48nd SCSI disk whole disk
1146 Partitions are handled in the same way as for IDE
1147 disks (see major number 3) except that the limit on
1148 partitions is 15.
1150 67 char Coda network file system
1151 0 = /dev/cfs0 Coda cache manager
1153 See http://www.coda.cs.cmu.edu for information about Coda.
1155 67 block SCSI disk devices (48-63)
1156 0 = /dev/sdaw 49th SCSI disk whole disk
1157 16 = /dev/sdax 50th SCSI disk whole disk
1158 32 = /dev/sday 51st SCSI disk whole disk
1159 ...
1160 240 = /dev/sdbl 64th SCSI disk whole disk
1162 Partitions are handled in the same way as for IDE
1163 disks (see major number 3) except that the limit on
1164 partitions is 15.
1166 68 char CAPI 2.0 interface
1167 0 = /dev/capi20 Control device
1168 1 = /dev/capi20.00 First CAPI 2.0 application
1169 2 = /dev/capi20.01 Second CAPI 2.0 application
1170 ...
1171 20 = /dev/capi20.19 19th CAPI 2.0 application
1173 ISDN CAPI 2.0 driver for use with CAPI 2.0
1174 applications; currently supports the AVM B1 card.
1176 68 block SCSI disk devices (64-79)
1177 0 = /dev/sdbm 65th SCSI disk whole disk
1178 16 = /dev/sdbn 66th SCSI disk whole disk
1179 32 = /dev/sdbo 67th SCSI disk whole disk
1180 ...
1181 240 = /dev/sdcb 80th SCSI disk whole disk
1183 Partitions are handled in the same way as for IDE
1184 disks (see major number 3) except that the limit on
1185 partitions is 15.
1187 69 char MA16 numeric accelerator card
1188 0 = /dev/ma16 Board memory access
1190 69 block SCSI disk devices (80-95)
1191 0 = /dev/sdcc 81st SCSI disk whole disk
1192 16 = /dev/sdcd 82nd SCSI disk whole disk
1193 32 = /dev/sdce 83th SCSI disk whole disk
1194 ...
1195 240 = /dev/sdcr 96th SCSI disk whole disk
1197 Partitions are handled in the same way as for IDE
1198 disks (see major number 3) except that the limit on
1199 partitions is 15.
1201 70 char SpellCaster Protocol Services Interface
1202 0 = /dev/apscfg Configuration interface
1203 1 = /dev/apsauth Authentication interface
1204 2 = /dev/apslog Logging interface
1205 3 = /dev/apsdbg Debugging interface
1206 64 = /dev/apsisdn ISDN command interface
1207 65 = /dev/apsasync Async command interface
1208 128 = /dev/apsmon Monitor interface
1210 70 block SCSI disk devices (96-111)
1211 0 = /dev/sdcs 97th SCSI disk whole disk
1212 16 = /dev/sdct 98th SCSI disk whole disk
1213 32 = /dev/sdcu 99th SCSI disk whole disk
1214 ...
1215 240 = /dev/sddh 112nd SCSI disk whole disk
1217 Partitions are handled in the same way as for IDE
1218 disks (see major number 3) except that the limit on
1219 partitions is 15.
1221 71 char Computone IntelliPort II serial card
1222 0 = /dev/ttyF0 IntelliPort II board 0, port 0
1223 1 = /dev/ttyF1 IntelliPort II board 0, port 1
1224 ...
1225 63 = /dev/ttyF63 IntelliPort II board 0, port 63
1226 64 = /dev/ttyF64 IntelliPort II board 1, port 0
1227 65 = /dev/ttyF65 IntelliPort II board 1, port 1
1228 ...
1229 127 = /dev/ttyF127 IntelliPort II board 1, port 63
1230 128 = /dev/ttyF128 IntelliPort II board 2, port 0
1231 129 = /dev/ttyF129 IntelliPort II board 2, port 1
1232 ...
1233 191 = /dev/ttyF191 IntelliPort II board 2, port 63
1234 192 = /dev/ttyF192 IntelliPort II board 3, port 0
1235 193 = /dev/ttyF193 IntelliPort II board 3, port 1
1236 ...
1237 255 = /dev/ttyF255 IntelliPort II board 3, port 63
1239 71 block SCSI disk devices (112-127)
1240 0 = /dev/sddi 113th SCSI disk whole disk
1241 16 = /dev/sddj 114th SCSI disk whole disk
1242 32 = /dev/sddk 115th SCSI disk whole disk
1243 ...
1244 240 = /dev/sddx 128th SCSI disk whole disk
1246 Partitions are handled in the same way as for IDE
1247 disks (see major number 3) except that the limit on
1248 partitions is 15.
1250 72 char Computone IntelliPort II serial card - alternate devices
1251 0 = /dev/cuf0 Callout device for ttyF0
1252 1 = /dev/cuf1 Callout device for ttyF1
1253 ...
1254 63 = /dev/cuf63 Callout device for ttyF63
1255 64 = /dev/cuf64 Callout device for ttyF64
1256 65 = /dev/cuf65 Callout device for ttyF65
1257 ...
1258 127 = /dev/cuf127 Callout device for ttyF127
1259 128 = /dev/cuf128 Callout device for ttyF128
1260 129 = /dev/cuf129 Callout device for ttyF129
1261 ...
1262 191 = /dev/cuf191 Callout device for ttyF191
1263 192 = /dev/cuf192 Callout device for ttyF192
1264 193 = /dev/cuf193 Callout device for ttyF193
1265 ...
1266 255 = /dev/cuf255 Callout device for ttyF255
1268 72 block Compaq Intelligent Drive Array, first controller
1269 0 = /dev/ida/c0d0 First logical drive whole disk
1270 16 = /dev/ida/c0d1 Second logical drive whole disk
1271 ...
1272 240 = /dev/ida/c0d15 16th logical drive whole disk
1274 Partitions are handled the same way as for Mylex
1275 DAC960 (see major number 48) except that the limit on
1276 partitions is 15.
1278 73 char Computone IntelliPort II serial card - control devices
1279 0 = /dev/ip2ipl0 Loadware device for board 0
1280 1 = /dev/ip2stat0 Status device for board 0
1281 4 = /dev/ip2ipl1 Loadware device for board 1
1282 5 = /dev/ip2stat1 Status device for board 1
1283 8 = /dev/ip2ipl2 Loadware device for board 2
1284 9 = /dev/ip2stat2 Status device for board 2
1285 12 = /dev/ip2ipl3 Loadware device for board 3
1286 13 = /dev/ip2stat3 Status device for board 3
1288 73 block Compaq Intelligent Drive Array, second controller
1289 0 = /dev/ida/c1d0 First logical drive whole disk
1290 16 = /dev/ida/c1d1 Second logical drive whole disk
1291 ...
1292 240 = /dev/ida/c1d15 16th logical drive whole disk
1294 Partitions are handled the same way as for Mylex
1295 DAC960 (see major number 48) except that the limit on
1296 partitions is 15.
1298 74 char SCI bridge
1299 0 = /dev/SCI/0 SCI device 0
1300 1 = /dev/SCI/1 SCI device 1
1301 ...
1303 Currently for Dolphin Interconnect Solutions' PCI-SCI
1304 bridge.
1306 74 block Compaq Intelligent Drive Array, third controller
1307 0 = /dev/ida/c2d0 First logical drive whole disk
1308 16 = /dev/ida/c2d1 Second logical drive whole disk
1309 ...
1310 240 = /dev/ida/c2d15 16th logical drive whole disk
1312 Partitions are handled the same way as for Mylex
1313 DAC960 (see major number 48) except that the limit on
1314 partitions is 15.
1316 75 char Specialix IO8+ serial card
1317 0 = /dev/ttyW0 First IO8+ port, first card
1318 1 = /dev/ttyW1 Second IO8+ port, first card
1319 ...
1320 8 = /dev/ttyW8 First IO8+ port, second card
1321 ...
1323 75 block Compaq Intelligent Drive Array, fourth controller
1324 0 = /dev/ida/c3d0 First logical drive whole disk
1325 16 = /dev/ida/c3d1 Second logical drive whole disk
1326 ...
1327 240 = /dev/ida/c3d15 16th logical drive whole disk
1329 Partitions are handled the same way as for Mylex
1330 DAC960 (see major number 48) except that the limit on
1331 partitions is 15.
1333 76 char Specialix IO8+ serial card - alternate devices
1334 0 = /dev/cuw0 Callout device for ttyW0
1335 1 = /dev/cuw1 Callout device for ttyW1
1336 ...
1337 8 = /dev/cuw8 Callout device for ttyW8
1338 ...
1340 76 block Compaq Intelligent Drive Array, fifth controller
1341 0 = /dev/ida/c4d0 First logical drive whole disk
1342 16 = /dev/ida/c4d1 Second logical drive whole disk
1343 ...
1344 240 = /dev/ida/c4d15 16th logical drive whole disk
1346 Partitions are handled the same way as for Mylex
1347 DAC960 (see major number 48) except that the limit on
1348 partitions is 15.
1351 77 char ComScire Quantum Noise Generator
1352 0 = /dev/qng ComScire Quantum Noise Generator
1354 77 block Compaq Intelligent Drive Array, sixth controller
1355 0 = /dev/ida/c5d0 First logical drive whole disk
1356 16 = /dev/ida/c5d1 Second logical drive whole disk
1357 ...
1358 240 = /dev/ida/c5d15 16th logical drive whole disk
1360 Partitions are handled the same way as for Mylex
1361 DAC960 (see major number 48) except that the limit on
1362 partitions is 15.
1364 78 char PAM Software's multimodem boards
1365 0 = /dev/ttyM0 First PAM modem
1366 1 = /dev/ttyM1 Second PAM modem
1367 ...
1369 78 block Compaq Intelligent Drive Array, seventh controller
1370 0 = /dev/ida/c6d0 First logical drive whole disk
1371 16 = /dev/ida/c6d1 Second logical drive whole disk
1372 ...
1373 240 = /dev/ida/c6d15 16th logical drive whole disk
1375 Partitions are handled the same way as for Mylex
1376 DAC960 (see major number 48) except that the limit on
1377 partitions is 15.
1379 79 char PAM Software's multimodem boards - alternate devices
1380 0 = /dev/cum0 Callout device for ttyM0
1381 1 = /dev/cum1 Callout device for ttyM1
1382 ...
1384 79 block Compaq Intelligent Drive Array, eighth controller
1385 0 = /dev/ida/c7d0 First logical drive whole disk
1386 16 = /dev/ida/c7d1 Second logical drive whole disk
1387 ...
1388 240 = /dev/ida/c715 16th logical drive whole disk
1390 Partitions are handled the same way as for Mylex
1391 DAC960 (see major number 48) except that the limit on
1392 partitions is 15.
1394 80 char Photometrics AT200 CCD camera
1395 0 = /dev/at200 Photometrics AT200 CCD camera
1397 80 block I2O hard disk
1398 0 = /dev/i2o/hda First I2O hard disk, whole disk
1399 16 = /dev/i2o/hdb Second I2O hard disk, whole disk
1400 ...
1401 240 = /dev/i2o/hdp 16th I2O hard disk, whole disk
1403 Partitions are handled in the same way as for IDE
1404 disks (see major number 3) except that the limit on
1405 partitions is 15.
1407 81 char video4linux
1408 0 = /dev/video0 Video capture/overlay device
1409 ...
1410 63 = /dev/video63 Video capture/overlay device
1411 64 = /dev/radio0 Radio device
1412 ...
1413 127 = /dev/radio63 Radio device
1414 128 = /dev/swradio0 Software Defined Radio device
1415 ...
1416 191 = /dev/swradio63 Software Defined Radio device
1417 224 = /dev/vbi0 Vertical blank interrupt
1418 ...
1419 255 = /dev/vbi31 Vertical blank interrupt
1421 Minor numbers are allocated dynamically unless
1422 CONFIG_VIDEO_FIXED_MINOR_RANGES (default n)
1423 configuration option is set.
1425 81 block I2O hard disk
1426 0 = /dev/i2o/hdq 17th I2O hard disk, whole disk
1427 16 = /dev/i2o/hdr 18th I2O hard disk, whole disk
1428 ...
1429 240 = /dev/i2o/hdaf 32nd I2O hard disk, whole disk
1431 Partitions are handled in the same way as for IDE
1432 disks (see major number 3) except that the limit on
1433 partitions is 15.
1435 82 char WiNRADiO communications receiver card
1436 0 = /dev/winradio0 First WiNRADiO card
1437 1 = /dev/winradio1 Second WiNRADiO card
1438 ...
1440 The driver and documentation may be obtained from
1441 http://www.winradio.com/
1443 82 block I2O hard disk
1444 0 = /dev/i2o/hdag 33rd I2O hard disk, whole disk
1445 16 = /dev/i2o/hdah 34th I2O hard disk, whole disk
1446 ...
1447 240 = /dev/i2o/hdav 48th I2O hard disk, whole disk
1449 Partitions are handled in the same way as for IDE
1450 disks (see major number 3) except that the limit on
1451 partitions is 15.
1453 83 char Matrox mga_vid video driver
1454 0 = /dev/mga_vid0 1st video card
1455 1 = /dev/mga_vid1 2nd video card
1456 2 = /dev/mga_vid2 3rd video card
1457 ...
1458 15 = /dev/mga_vid15 16th video card
1460 83 block I2O hard disk
1461 0 = /dev/i2o/hdaw 49th I2O hard disk, whole disk
1462 16 = /dev/i2o/hdax 50th I2O hard disk, whole disk
1463 ...
1464 240 = /dev/i2o/hdbl 64th I2O hard disk, whole disk
1466 Partitions are handled in the same way as for IDE
1467 disks (see major number 3) except that the limit on
1468 partitions is 15.
1470 84 char Ikon 1011[57] Versatec Greensheet Interface
1471 0 = /dev/ihcp0 First Greensheet port
1472 1 = /dev/ihcp1 Second Greensheet port
1474 84 block I2O hard disk
1475 0 = /dev/i2o/hdbm 65th I2O hard disk, whole disk
1476 16 = /dev/i2o/hdbn 66th I2O hard disk, whole disk
1477 ...
1478 240 = /dev/i2o/hdcb 80th I2O hard disk, whole disk
1480 Partitions are handled in the same way as for IDE
1481 disks (see major number 3) except that the limit on
1482 partitions is 15.
1484 85 char Linux/SGI shared memory input queue
1485 0 = /dev/shmiq Master shared input queue
1486 1 = /dev/qcntl0 First device pushed
1487 2 = /dev/qcntl1 Second device pushed
1488 ...
1490 85 block I2O hard disk
1491 0 = /dev/i2o/hdcc 81st I2O hard disk, whole disk
1492 16 = /dev/i2o/hdcd 82nd I2O hard disk, whole disk
1493 ...
1494 240 = /dev/i2o/hdcr 96th I2O hard disk, whole disk
1496 Partitions are handled in the same way as for IDE
1497 disks (see major number 3) except that the limit on
1498 partitions is 15.
1500 86 char SCSI media changer
1501 0 = /dev/sch0 First SCSI media changer
1502 1 = /dev/sch1 Second SCSI media changer
1503 ...
1505 86 block I2O hard disk
1506 0 = /dev/i2o/hdcs 97th I2O hard disk, whole disk
1507 16 = /dev/i2o/hdct 98th I2O hard disk, whole disk
1508 ...
1509 240 = /dev/i2o/hddh 112th I2O hard disk, whole disk
1511 Partitions are handled in the same way as for IDE
1512 disks (see major number 3) except that the limit on
1513 partitions is 15.
1515 87 char Sony Control-A1 stereo control bus
1516 0 = /dev/controla0 First device on chain
1517 1 = /dev/controla1 Second device on chain
1518 ...
1520 87 block I2O hard disk
1521 0 = /dev/i2o/hddi 113rd I2O hard disk, whole disk
1522 16 = /dev/i2o/hddj 114th I2O hard disk, whole disk
1523 ...
1524 240 = /dev/i2o/hddx 128th I2O hard disk, whole disk
1526 Partitions are handled in the same way as for IDE
1527 disks (see major number 3) except that the limit on
1528 partitions is 15.
1530 88 char COMX synchronous serial card
1531 0 = /dev/comx0 COMX channel 0
1532 1 = /dev/comx1 COMX channel 1
1533 ...
1535 88 block Seventh IDE hard disk/CD-ROM interface
1536 0 = /dev/hdm Master: whole disk (or CD-ROM)
1537 64 = /dev/hdn Slave: whole disk (or CD-ROM)
1539 Partitions are handled the same way as for the first
1540 interface (see major number 3).
1542 89 char I2C bus interface
1543 0 = /dev/i2c-0 First I2C adapter
1544 1 = /dev/i2c-1 Second I2C adapter
1545 ...
1547 89 block Eighth IDE hard disk/CD-ROM interface
1548 0 = /dev/hdo Master: whole disk (or CD-ROM)
1549 64 = /dev/hdp Slave: whole disk (or CD-ROM)
1551 Partitions are handled the same way as for the first
1552 interface (see major number 3).
1554 90 char Memory Technology Device (RAM, ROM, Flash)
1555 0 = /dev/mtd0 First MTD (rw)
1556 1 = /dev/mtdr0 First MTD (ro)
1557 ...
1558 30 = /dev/mtd15 16th MTD (rw)
1559 31 = /dev/mtdr15 16th MTD (ro)
1561 90 block Ninth IDE hard disk/CD-ROM interface
1562 0 = /dev/hdq Master: whole disk (or CD-ROM)
1563 64 = /dev/hdr Slave: whole disk (or CD-ROM)
1565 Partitions are handled the same way as for the first
1566 interface (see major number 3).
1568 91 char CAN-Bus devices
1569 0 = /dev/can0 First CAN-Bus controller
1570 1 = /dev/can1 Second CAN-Bus controller
1571 ...
1573 91 block Tenth IDE hard disk/CD-ROM interface
1574 0 = /dev/hds Master: whole disk (or CD-ROM)
1575 64 = /dev/hdt Slave: whole disk (or CD-ROM)
1577 Partitions are handled the same way as for the first
1578 interface (see major number 3).
1580 92 char Reserved for ith Kommunikationstechnik MIC ISDN card
1582 92 block PPDD encrypted disk driver
1583 0 = /dev/ppdd0 First encrypted disk
1584 1 = /dev/ppdd1 Second encrypted disk
1585 ...
1587 Partitions are handled in the same way as for IDE
1588 disks (see major number 3) except that the limit on
1589 partitions is 15.
1591 93 char
1593 93 block NAND Flash Translation Layer filesystem
1594 0 = /dev/nftla First NFTL layer
1595 16 = /dev/nftlb Second NFTL layer
1596 ...
1597 240 = /dev/nftlp 16th NTFL layer
1599 94 char
1601 94 block IBM S/390 DASD block storage
1602 0 = /dev/dasda First DASD device, major
1603 1 = /dev/dasda1 First DASD device, block 1
1604 2 = /dev/dasda2 First DASD device, block 2
1605 3 = /dev/dasda3 First DASD device, block 3
1606 4 = /dev/dasdb Second DASD device, major
1607 5 = /dev/dasdb1 Second DASD device, block 1
1608 6 = /dev/dasdb2 Second DASD device, block 2
1609 7 = /dev/dasdb3 Second DASD device, block 3
1610 ...
1612 95 char IP filter
1613 0 = /dev/ipl Filter control device/log file
1614 1 = /dev/ipnat NAT control device/log file
1615 2 = /dev/ipstate State information log file
1616 3 = /dev/ipauth Authentication control device/log file
1617 ...
1619 96 char Parallel port ATAPI tape devices
1620 0 = /dev/pt0 First parallel port ATAPI tape
1621 1 = /dev/pt1 Second parallel port ATAPI tape
1622 ...
1623 128 = /dev/npt0 First p.p. ATAPI tape, no rewind
1624 129 = /dev/npt1 Second p.p. ATAPI tape, no rewind
1625 ...
1627 96 block Inverse NAND Flash Translation Layer
1628 0 = /dev/inftla First INFTL layer
1629 16 = /dev/inftlb Second INFTL layer
1630 ...
1631 240 = /dev/inftlp 16th INTFL layer
1633 97 char Parallel port generic ATAPI interface
1634 0 = /dev/pg0 First parallel port ATAPI device
1635 1 = /dev/pg1 Second parallel port ATAPI device
1636 2 = /dev/pg2 Third parallel port ATAPI device
1637 3 = /dev/pg3 Fourth parallel port ATAPI device
1639 These devices support the same API as the generic SCSI
1640 devices.
1642 98 char Control and Measurement Device (comedi)
1643 0 = /dev/comedi0 First comedi device
1644 1 = /dev/comedi1 Second comedi device
1645 ...
1647 See http://stm.lbl.gov/comedi.
1649 98 block User-mode virtual block device
1650 0 = /dev/ubda First user-mode block device
1651 16 = /dev/udbb Second user-mode block device
1652 ...
1654 Partitions are handled in the same way as for IDE
1655 disks (see major number 3) except that the limit on
1656 partitions is 15.
1658 This device is used by the user-mode virtual kernel port.
1660 99 char Raw parallel ports
1661 0 = /dev/parport0 First parallel port
1662 1 = /dev/parport1 Second parallel port
1663 ...
1665 99 block JavaStation flash disk
1666 0 = /dev/jsfd JavaStation flash disk
1668 100 char Telephony for Linux
1669 0 = /dev/phone0 First telephony device
1670 1 = /dev/phone1 Second telephony device
1671 ...
1673 101 char Motorola DSP 56xxx board
1674 0 = /dev/mdspstat Status information
1675 1 = /dev/mdsp1 First DSP board I/O controls
1676 ...
1677 16 = /dev/mdsp16 16th DSP board I/O controls
1679 101 block AMI HyperDisk RAID controller
1680 0 = /dev/amiraid/ar0 First array whole disk
1681 16 = /dev/amiraid/ar1 Second array whole disk
1682 ...
1683 240 = /dev/amiraid/ar15 16th array whole disk
1685 For each device, partitions are added as:
1686 0 = /dev/amiraid/ar? Whole disk
1687 1 = /dev/amiraid/ar?p1 First partition
1688 2 = /dev/amiraid/ar?p2 Second partition
1689 ...
1690 15 = /dev/amiraid/ar?p15 15th partition
1692 102 char
1694 102 block Compressed block device
1695 0 = /dev/cbd/a First compressed block device, whole device
1696 16 = /dev/cbd/b Second compressed block device, whole device
1697 ...
1698 240 = /dev/cbd/p 16th compressed block device, whole device
1700 Partitions are handled in the same way as for IDE
1701 disks (see major number 3) except that the limit on
1702 partitions is 15.
1704 103 char Arla network file system
1705 0 = /dev/nnpfs0 First NNPFS device
1706 1 = /dev/nnpfs1 Second NNPFS device
1708 Arla is a free clone of the Andrew File System, AFS.
1709 The NNPFS device gives user mode filesystem
1710 implementations a kernel presence for caching and easy
1711 mounting. For more information about the project,
1712 write to <arla-drinkers@stacken.kth.se> or see
1713 http://www.stacken.kth.se/project/arla/
1715 103 block Audit device
1716 0 = /dev/audit Audit device
1718 104 char Flash BIOS support
1720 104 block Compaq Next Generation Drive Array, first controller
1721 0 = /dev/cciss/c0d0 First logical drive, whole disk
1722 16 = /dev/cciss/c0d1 Second logical drive, whole disk
1723 ...
1724 240 = /dev/cciss/c0d15 16th logical drive, whole disk
1726 Partitions are handled the same way as for Mylex
1727 DAC960 (see major number 48) except that the limit on
1728 partitions is 15.
1730 105 char Comtrol VS-1000 serial controller
1731 0 = /dev/ttyV0 First VS-1000 port
1732 1 = /dev/ttyV1 Second VS-1000 port
1733 ...
1735 105 block Compaq Next Generation Drive Array, second controller
1736 0 = /dev/cciss/c1d0 First logical drive, whole disk
1737 16 = /dev/cciss/c1d1 Second logical drive, whole disk
1738 ...
1739 240 = /dev/cciss/c1d15 16th logical drive, whole disk
1741 Partitions are handled the same way as for Mylex
1742 DAC960 (see major number 48) except that the limit on
1743 partitions is 15.
1745 106 char Comtrol VS-1000 serial controller - alternate devices
1746 0 = /dev/cuv0 First VS-1000 port
1747 1 = /dev/cuv1 Second VS-1000 port
1748 ...
1750 106 block Compaq Next Generation Drive Array, third controller
1751 0 = /dev/cciss/c2d0 First logical drive, whole disk
1752 16 = /dev/cciss/c2d1 Second logical drive, whole disk
1753 ...
1754 240 = /dev/cciss/c2d15 16th logical drive, whole disk
1756 Partitions are handled the same way as for Mylex
1757 DAC960 (see major number 48) except that the limit on
1758 partitions is 15.
1760 107 char 3Dfx Voodoo Graphics device
1761 0 = /dev/3dfx Primary 3Dfx graphics device
1763 107 block Compaq Next Generation Drive Array, fourth controller
1764 0 = /dev/cciss/c3d0 First logical drive, whole disk
1765 16 = /dev/cciss/c3d1 Second logical drive, whole disk
1766 ...
1767 240 = /dev/cciss/c3d15 16th logical drive, whole disk
1769 Partitions are handled the same way as for Mylex
1770 DAC960 (see major number 48) except that the limit on
1771 partitions is 15.
1773 108 char Device independent PPP interface
1774 0 = /dev/ppp Device independent PPP interface
1776 108 block Compaq Next Generation Drive Array, fifth controller
1777 0 = /dev/cciss/c4d0 First logical drive, whole disk
1778 16 = /dev/cciss/c4d1 Second logical drive, whole disk
1779 ...
1780 240 = /dev/cciss/c4d15 16th logical drive, whole disk
1782 Partitions are handled the same way as for Mylex
1783 DAC960 (see major number 48) except that the limit on
1784 partitions is 15.
1786 109 char Reserved for logical volume manager
1788 109 block Compaq Next Generation Drive Array, sixth controller
1789 0 = /dev/cciss/c5d0 First logical drive, whole disk
1790 16 = /dev/cciss/c5d1 Second logical drive, whole disk
1791 ...
1792 240 = /dev/cciss/c5d15 16th logical drive, whole disk
1794 Partitions are handled the same way as for Mylex
1795 DAC960 (see major number 48) except that the limit on
1796 partitions is 15.
1798 110 char miroMEDIA Surround board
1799 0 = /dev/srnd0 First miroMEDIA Surround board
1800 1 = /dev/srnd1 Second miroMEDIA Surround board
1801 ...
1803 110 block Compaq Next Generation Drive Array, seventh controller
1804 0 = /dev/cciss/c6d0 First logical drive, whole disk
1805 16 = /dev/cciss/c6d1 Second logical drive, whole disk
1806 ...
1807 240 = /dev/cciss/c6d15 16th logical drive, whole disk
1809 Partitions are handled the same way as for Mylex
1810 DAC960 (see major number 48) except that the limit on
1811 partitions is 15.
1813 111 char
1815 111 block Compaq Next Generation Drive Array, eighth controller
1816 0 = /dev/cciss/c7d0 First logical drive, whole disk
1817 16 = /dev/cciss/c7d1 Second logical drive, whole disk
1818 ...
1819 240 = /dev/cciss/c7d15 16th logical drive, whole disk
1821 Partitions are handled the same way as for Mylex
1822 DAC960 (see major number 48) except that the limit on
1823 partitions is 15.
1825 112 char ISI serial card
1826 0 = /dev/ttyM0 First ISI port
1827 1 = /dev/ttyM1 Second ISI port
1828 ...
1830 There is currently a device-naming conflict between
1831 these and PAM multimodems (major 78).
1833 112 block IBM iSeries virtual disk
1834 0 = /dev/iseries/vda First virtual disk, whole disk
1835 8 = /dev/iseries/vdb Second virtual disk, whole disk
1836 ...
1837 200 = /dev/iseries/vdz 26th virtual disk, whole disk
1838 208 = /dev/iseries/vdaa 27th virtual disk, whole disk
1839 ...
1840 248 = /dev/iseries/vdaf 32nd virtual disk, whole disk
1842 Partitions are handled in the same way as for IDE
1843 disks (see major number 3) except that the limit on
1844 partitions is 7.
1846 113 char ISI serial card - alternate devices
1847 0 = /dev/cum0 Callout device for ttyM0
1848 1 = /dev/cum1 Callout device for ttyM1
1849 ...
1851 113 block IBM iSeries virtual CD-ROM
1852 0 = /dev/iseries/vcda First virtual CD-ROM
1853 1 = /dev/iseries/vcdb Second virtual CD-ROM
1854 ...
1856 114 char Picture Elements ISE board
1857 0 = /dev/ise0 First ISE board
1858 1 = /dev/ise1 Second ISE board
1859 ...
1860 128 = /dev/isex0 Control node for first ISE board
1861 129 = /dev/isex1 Control node for second ISE board
1862 ...
1864 The ISE board is an embedded computer, optimized for
1865 image processing. The /dev/iseN nodes are the general
1866 I/O access to the board, the /dev/isex0 nodes command
1867 nodes used to control the board.
1869 114 block IDE BIOS powered software RAID interfaces such as the
1870 Promise Fastrak
1872 0 = /dev/ataraid/d0
1873 1 = /dev/ataraid/d0p1
1874 2 = /dev/ataraid/d0p2
1875 ...
1876 16 = /dev/ataraid/d1
1877 17 = /dev/ataraid/d1p1
1878 18 = /dev/ataraid/d1p2
1879 ...
1880 255 = /dev/ataraid/d15p15
1882 Partitions are handled in the same way as for IDE
1883 disks (see major number 3) except that the limit on
1884 partitions is 15.
1886 115 char TI link cable devices (115 was formerly the console driver speaker)
1887 0 = /dev/tipar0 Parallel cable on first parallel port
1888 ...
1889 7 = /dev/tipar7 Parallel cable on seventh parallel port
1891 8 = /dev/tiser0 Serial cable on first serial port
1892 ...
1893 15 = /dev/tiser7 Serial cable on seventh serial port
1895 16 = /dev/tiusb0 First USB cable
1896 ...
1897 47 = /dev/tiusb31 32nd USB cable
1899 115 block NetWare (NWFS) Devices (0-255)
1901 The NWFS (NetWare) devices are used to present a
1902 collection of NetWare Mirror Groups or NetWare
1903 Partitions as a logical storage segment for
1904 use in mounting NetWare volumes. A maximum of
1905 256 NetWare volumes can be supported in a single
1906 machine.
1908 http://cgfa.telepac.pt/ftp2/kernel.org/linux/kernel/people/jmerkey/nwfs/
1910 0 = /dev/nwfs/v0 First NetWare (NWFS) Logical Volume
1911 1 = /dev/nwfs/v1 Second NetWare (NWFS) Logical Volume
1912 2 = /dev/nwfs/v2 Third NetWare (NWFS) Logical Volume
1913 ...
1914 255 = /dev/nwfs/v255 Last NetWare (NWFS) Logical Volume
1916 116 char Advanced Linux Sound Driver (ALSA)
1918 116 block MicroMemory battery backed RAM adapter (NVRAM)
1919 Supports 16 boards, 15 partitions each.
1920 Requested by neilb at cse.unsw.edu.au.
1922 0 = /dev/umem/d0 Whole of first board
1923 1 = /dev/umem/d0p1 First partition of first board
1924 2 = /dev/umem/d0p2 Second partition of first board
1925 15 = /dev/umem/d0p15 15th partition of first board
1927 16 = /dev/umem/d1 Whole of second board
1928 17 = /dev/umem/d1p1 First partition of second board
1929 ...
1930 255= /dev/umem/d15p15 15th partition of 16th board.
1932 117 char COSA/SRP synchronous serial card
1933 0 = /dev/cosa0c0 1st board, 1st channel
1934 1 = /dev/cosa0c1 1st board, 2nd channel
1935 ...
1936 16 = /dev/cosa1c0 2nd board, 1st channel
1937 17 = /dev/cosa1c1 2nd board, 2nd channel
1938 ...
1940 117 block Enterprise Volume Management System (EVMS)
1942 The EVMS driver uses a layered, plug-in model to provide
1943 unparalleled flexibility and extensibility in managing
1944 storage. This allows for easy expansion or customization
1945 of various levels of volume management. Requested by
1946 Mark Peloquin (peloquin at us.ibm.com).
1948 Note: EVMS populates and manages all the devnodes in
1949 /dev/evms.
1951 http://sf.net/projects/evms
1953 0 = /dev/evms/block_device EVMS block device
1954 1 = /dev/evms/legacyname1 First EVMS legacy device
1955 2 = /dev/evms/legacyname2 Second EVMS legacy device
1956 ...
1957 Both ranges can grow (down or up) until they meet.
1958 ...
1959 254 = /dev/evms/EVMSname2 Second EVMS native device
1960 255 = /dev/evms/EVMSname1 First EVMS native device
1962 Note: legacyname(s) are derived from the normal legacy
1963 device names. For example, /dev/hda5 would become
1964 /dev/evms/hda5.
1966 118 char IBM Cryptographic Accelerator
1967 0 = /dev/ica Virtual interface to all IBM Crypto Accelerators
1968 1 = /dev/ica0 IBMCA Device 0
1969 2 = /dev/ica1 IBMCA Device 1
1970 ...
1972 119 char VMware virtual network control
1973 0 = /dev/vnet0 1st virtual network
1974 1 = /dev/vnet1 2nd virtual network
1975 ...
1977 120-127 char LOCAL/EXPERIMENTAL USE
1979 120-127 block LOCAL/EXPERIMENTAL USE
1980 Allocated for local/experimental use. For devices not
1981 assigned official numbers, these ranges should be
1982 used in order to avoid conflicting with future assignments.
1984 128-135 char Unix98 PTY masters
1986 These devices should not have corresponding device
1987 nodes; instead they should be accessed through the
1988 /dev/ptmx cloning interface.
1990 128 block SCSI disk devices (128-143)
1991 0 = /dev/sddy 129th SCSI disk whole disk
1992 16 = /dev/sddz 130th SCSI disk whole disk
1993 32 = /dev/sdea 131th SCSI disk whole disk
1994 ...
1995 240 = /dev/sden 144th SCSI disk whole disk
1997 Partitions are handled in the same way as for IDE
1998 disks (see major number 3) except that the limit on
1999 partitions is 15.
2001 129 block SCSI disk devices (144-159)
2002 0 = /dev/sdeo 145th SCSI disk whole disk
2003 16 = /dev/sdep 146th SCSI disk whole disk
2004 32 = /dev/sdeq 147th SCSI disk whole disk
2005 ...
2006 240 = /dev/sdfd 160th SCSI disk whole disk
2008 Partitions are handled in the same way as for IDE
2009 disks (see major number 3) except that the limit on
2010 partitions is 15.
2012 130 char (Misc devices)
2014 130 block SCSI disk devices (160-175)
2015 0 = /dev/sdfe 161st SCSI disk whole disk
2016 16 = /dev/sdff 162nd SCSI disk whole disk
2017 32 = /dev/sdfg 163rd SCSI disk whole disk
2018 ...
2019 240 = /dev/sdft 176th SCSI disk whole disk
2021 Partitions are handled in the same way as for IDE
2022 disks (see major number 3) except that the limit on
2023 partitions is 15.
2025 131 block SCSI disk devices (176-191)
2026 0 = /dev/sdfu 177th SCSI disk whole disk
2027 16 = /dev/sdfv 178th SCSI disk whole disk
2028 32 = /dev/sdfw 179th SCSI disk whole disk
2029 ...
2030 240 = /dev/sdgj 192nd SCSI disk whole disk
2032 Partitions are handled in the same way as for IDE
2033 disks (see major number 3) except that the limit on
2034 partitions is 15.
2036 132 block SCSI disk devices (192-207)
2037 0 = /dev/sdgk 193rd SCSI disk whole disk
2038 16 = /dev/sdgl 194th SCSI disk whole disk
2039 32 = /dev/sdgm 195th SCSI disk whole disk
2040 ...
2041 240 = /dev/sdgz 208th SCSI disk whole disk
2043 Partitions are handled in the same way as for IDE
2044 disks (see major number 3) except that the limit on
2045 partitions is 15.
2047 133 block SCSI disk devices (208-223)
2048 0 = /dev/sdha 209th SCSI disk whole disk
2049 16 = /dev/sdhb 210th SCSI disk whole disk
2050 32 = /dev/sdhc 211th SCSI disk whole disk
2051 ...
2052 240 = /dev/sdhp 224th SCSI disk whole disk
2054 Partitions are handled in the same way as for IDE
2055 disks (see major number 3) except that the limit on
2056 partitions is 15.
2058 134 block SCSI disk devices (224-239)
2059 0 = /dev/sdhq 225th SCSI disk whole disk
2060 16 = /dev/sdhr 226th SCSI disk whole disk
2061 32 = /dev/sdhs 227th SCSI disk whole disk
2062 ...
2063 240 = /dev/sdif 240th SCSI disk whole disk
2065 Partitions are handled in the same way as for IDE
2066 disks (see major number 3) except that the limit on
2067 partitions is 15.
2069 135 block SCSI disk devices (240-255)
2070 0 = /dev/sdig 241st SCSI disk whole disk
2071 16 = /dev/sdih 242nd SCSI disk whole disk
2072 32 = /dev/sdih 243rd SCSI disk whole disk
2073 ...
2074 240 = /dev/sdiv 256th SCSI disk whole disk
2076 Partitions are handled in the same way as for IDE
2077 disks (see major number 3) except that the limit on
2078 partitions is 15.
2080 136-143 char Unix98 PTY slaves
2081 0 = /dev/pts/0 First Unix98 pseudo-TTY
2082 1 = /dev/pts/1 Second Unix98 pseudo-TTY
2083 ...
2085 These device nodes are automatically generated with
2086 the proper permissions and modes by mounting the
2087 devpts filesystem onto /dev/pts with the appropriate
2088 mount options (distribution dependent, however, on
2089 *most* distributions the appropriate options are
2090 "mode=0620,gid=<gid of the "tty" group>".)
2092 136 block Mylex DAC960 PCI RAID controller; ninth controller
2093 0 = /dev/rd/c8d0 First disk, whole disk
2094 8 = /dev/rd/c8d1 Second disk, whole disk
2095 ...
2096 248 = /dev/rd/c8d31 32nd disk, whole disk
2098 Partitions are handled as for major 48.
2100 137 block Mylex DAC960 PCI RAID controller; tenth controller
2101 0 = /dev/rd/c9d0 First disk, whole disk
2102 8 = /dev/rd/c9d1 Second disk, whole disk
2103 ...
2104 248 = /dev/rd/c9d31 32nd disk, whole disk
2106 Partitions are handled as for major 48.
2108 138 block Mylex DAC960 PCI RAID controller; eleventh controller
2109 0 = /dev/rd/c10d0 First disk, whole disk
2110 8 = /dev/rd/c10d1 Second disk, whole disk
2111 ...
2112 248 = /dev/rd/c10d31 32nd disk, whole disk
2114 Partitions are handled as for major 48.
2116 139 block Mylex DAC960 PCI RAID controller; twelfth controller
2117 0 = /dev/rd/c11d0 First disk, whole disk
2118 8 = /dev/rd/c11d1 Second disk, whole disk
2119 ...
2120 248 = /dev/rd/c11d31 32nd disk, whole disk
2122 Partitions are handled as for major 48.
2124 140 block Mylex DAC960 PCI RAID controller; thirteenth controller
2125 0 = /dev/rd/c12d0 First disk, whole disk
2126 8 = /dev/rd/c12d1 Second disk, whole disk
2127 ...
2128 248 = /dev/rd/c12d31 32nd disk, whole disk
2130 Partitions are handled as for major 48.
2132 141 block Mylex DAC960 PCI RAID controller; fourteenth controller
2133 0 = /dev/rd/c13d0 First disk, whole disk
2134 8 = /dev/rd/c13d1 Second disk, whole disk
2135 ...
2136 248 = /dev/rd/c13d31 32nd disk, whole disk
2138 Partitions are handled as for major 48.
2140 142 block Mylex DAC960 PCI RAID controller; fifteenth controller
2141 0 = /dev/rd/c14d0 First disk, whole disk
2142 8 = /dev/rd/c14d1 Second disk, whole disk
2143 ...
2144 248 = /dev/rd/c14d31 32nd disk, whole disk
2146 Partitions are handled as for major 48.
2148 143 block Mylex DAC960 PCI RAID controller; sixteenth controller
2149 0 = /dev/rd/c15d0 First disk, whole disk
2150 8 = /dev/rd/c15d1 Second disk, whole disk
2151 ...
2152 248 = /dev/rd/c15d31 32nd disk, whole disk
2154 Partitions are handled as for major 48.
2156 144 char Encapsulated PPP
2157 0 = /dev/pppox0 First PPP over Ethernet
2158 ...
2159 63 = /dev/pppox63 64th PPP over Ethernet
2161 This is primarily used for ADSL.
2163 The SST 5136-DN DeviceNet interface driver has been
2164 relocated to major 183 due to an unfortunate conflict.
2166 144 block Expansion Area #1 for more non-device (e.g. NFS) mounts
2167 0 = mounted device 256
2168 255 = mounted device 511
2170 145 char SAM9407-based soundcard
2171 0 = /dev/sam0_mixer
2172 1 = /dev/sam0_sequencer
2173 2 = /dev/sam0_midi00
2174 3 = /dev/sam0_dsp
2175 4 = /dev/sam0_audio
2176 6 = /dev/sam0_sndstat
2177 18 = /dev/sam0_midi01
2178 34 = /dev/sam0_midi02
2179 50 = /dev/sam0_midi03
2180 64 = /dev/sam1_mixer
2181 ...
2182 128 = /dev/sam2_mixer
2183 ...
2184 192 = /dev/sam3_mixer
2185 ...
2187 Device functions match OSS, but offer a number of
2188 addons, which are sam9407 specific. OSS can be
2189 operated simultaneously, taking care of the codec.
2191 145 block Expansion Area #2 for more non-device (e.g. NFS) mounts
2192 0 = mounted device 512
2193 255 = mounted device 767
2195 146 char SYSTRAM SCRAMNet mirrored-memory network
2196 0 = /dev/scramnet0 First SCRAMNet device
2197 1 = /dev/scramnet1 Second SCRAMNet device
2198 ...
2200 146 block Expansion Area #3 for more non-device (e.g. NFS) mounts
2201 0 = mounted device 768
2202 255 = mounted device 1023
2204 147 char Aureal Semiconductor Vortex Audio device
2205 0 = /dev/aureal0 First Aureal Vortex
2206 1 = /dev/aureal1 Second Aureal Vortex
2207 ...
2209 147 block Distributed Replicated Block Device (DRBD)
2210 0 = /dev/drbd0 First DRBD device
2211 1 = /dev/drbd1 Second DRBD device
2212 ...
2214 148 char Technology Concepts serial card
2215 0 = /dev/ttyT0 First TCL port
2216 1 = /dev/ttyT1 Second TCL port
2217 ...
2219 149 char Technology Concepts serial card - alternate devices
2220 0 = /dev/cut0 Callout device for ttyT0
2221 1 = /dev/cut0 Callout device for ttyT1
2222 ...
2224 150 char Real-Time Linux FIFOs
2225 0 = /dev/rtf0 First RTLinux FIFO
2226 1 = /dev/rtf1 Second RTLinux FIFO
2227 ...
2229 151 char DPT I2O SmartRaid V controller
2230 0 = /dev/dpti0 First DPT I2O adapter
2231 1 = /dev/dpti1 Second DPT I2O adapter
2232 ...
2234 152 char EtherDrive Control Device
2235 0 = /dev/etherd/ctl Connect/Disconnect an EtherDrive
2236 1 = /dev/etherd/err Monitor errors
2237 2 = /dev/etherd/raw Raw AoE packet monitor
2239 152 block EtherDrive Block Devices
2240 0 = /dev/etherd/0 EtherDrive 0
2241 ...
2242 255 = /dev/etherd/255 EtherDrive 255
2244 153 char SPI Bus Interface (sometimes referred to as MicroWire)
2245 0 = /dev/spi0 First SPI device on the bus
2246 1 = /dev/spi1 Second SPI device on the bus
2247 ...
2248 15 = /dev/spi15 Sixteenth SPI device on the bus
2250 153 block Enhanced Metadisk RAID (EMD) storage units
2251 0 = /dev/emd/0 First unit
2252 1 = /dev/emd/0p1 Partition 1 on First unit
2253 2 = /dev/emd/0p2 Partition 2 on First unit
2254 ...
2255 15 = /dev/emd/0p15 Partition 15 on First unit
2257 16 = /dev/emd/1 Second unit
2258 32 = /dev/emd/2 Third unit
2259 ...
2260 240 = /dev/emd/15 Sixteenth unit
2262 Partitions are handled in the same way as for IDE
2263 disks (see major number 3) except that the limit on
2264 partitions is 15.
2266 154 char Specialix RIO serial card
2267 0 = /dev/ttySR0 First RIO port
2268 ...
2269 255 = /dev/ttySR255 256th RIO port
2271 155 char Specialix RIO serial card - alternate devices
2272 0 = /dev/cusr0 Callout device for ttySR0
2273 ...
2274 255 = /dev/cusr255 Callout device for ttySR255
2276 156 char Specialix RIO serial card
2277 0 = /dev/ttySR256 257th RIO port
2278 ...
2279 255 = /dev/ttySR511 512th RIO port
2281 157 char Specialix RIO serial card - alternate devices
2282 0 = /dev/cusr256 Callout device for ttySR256
2283 ...
2284 255 = /dev/cusr511 Callout device for ttySR511
2286 158 char Dialogic GammaLink fax driver
2287 0 = /dev/gfax0 GammaLink channel 0
2288 1 = /dev/gfax1 GammaLink channel 1
2289 ...
2291 159 char RESERVED
2293 159 block RESERVED
2295 160 char General Purpose Instrument Bus (GPIB)
2296 0 = /dev/gpib0 First GPIB bus
2297 1 = /dev/gpib1 Second GPIB bus
2298 ...
2300 160 block Carmel 8-port SATA Disks on First Controller
2301 0 = /dev/carmel/0 SATA disk 0 whole disk
2302 1 = /dev/carmel/0p1 SATA disk 0 partition 1
2303 ...
2304 31 = /dev/carmel/0p31 SATA disk 0 partition 31
2306 32 = /dev/carmel/1 SATA disk 1 whole disk
2307 64 = /dev/carmel/2 SATA disk 2 whole disk
2308 ...
2309 224 = /dev/carmel/7 SATA disk 7 whole disk
2311 Partitions are handled in the same way as for IDE
2312 disks (see major number 3) except that the limit on
2313 partitions is 31.
2315 161 char IrCOMM devices (IrDA serial/parallel emulation)
2316 0 = /dev/ircomm0 First IrCOMM device
2317 1 = /dev/ircomm1 Second IrCOMM device
2318 ...
2319 16 = /dev/irlpt0 First IrLPT device
2320 17 = /dev/irlpt1 Second IrLPT device
2321 ...
2323 161 block Carmel 8-port SATA Disks on Second Controller
2324 0 = /dev/carmel/8 SATA disk 8 whole disk
2325 1 = /dev/carmel/8p1 SATA disk 8 partition 1
2326 ...
2327 31 = /dev/carmel/8p31 SATA disk 8 partition 31
2329 32 = /dev/carmel/9 SATA disk 9 whole disk
2330 64 = /dev/carmel/10 SATA disk 10 whole disk
2331 ...
2332 224 = /dev/carmel/15 SATA disk 15 whole disk
2334 Partitions are handled in the same way as for IDE
2335 disks (see major number 3) except that the limit on
2336 partitions is 31.
2338 162 char Raw block device interface
2339 0 = /dev/rawctl Raw I/O control device
2340 1 = /dev/raw/raw1 First raw I/O device
2341 2 = /dev/raw/raw2 Second raw I/O device
2342 ...
2343 max minor number of raw device is set by kernel config
2344 MAX_RAW_DEVS or raw module parameter 'max_raw_devs'
2346 163 char
2348 164 char Chase Research AT/PCI-Fast serial card
2349 0 = /dev/ttyCH0 AT/PCI-Fast board 0, port 0
2350 ...
2351 15 = /dev/ttyCH15 AT/PCI-Fast board 0, port 15
2352 16 = /dev/ttyCH16 AT/PCI-Fast board 1, port 0
2353 ...
2354 31 = /dev/ttyCH31 AT/PCI-Fast board 1, port 15
2355 32 = /dev/ttyCH32 AT/PCI-Fast board 2, port 0
2356 ...
2357 47 = /dev/ttyCH47 AT/PCI-Fast board 2, port 15
2358 48 = /dev/ttyCH48 AT/PCI-Fast board 3, port 0
2359 ...
2360 63 = /dev/ttyCH63 AT/PCI-Fast board 3, port 15
2362 165 char Chase Research AT/PCI-Fast serial card - alternate devices
2363 0 = /dev/cuch0 Callout device for ttyCH0
2364 ...
2365 63 = /dev/cuch63 Callout device for ttyCH63
2367 166 char ACM USB modems
2368 0 = /dev/ttyACM0 First ACM modem
2369 1 = /dev/ttyACM1 Second ACM modem
2370 ...
2372 167 char ACM USB modems - alternate devices
2373 0 = /dev/cuacm0 Callout device for ttyACM0
2374 1 = /dev/cuacm1 Callout device for ttyACM1
2375 ...
2377 168 char Eracom CSA7000 PCI encryption adaptor
2378 0 = /dev/ecsa0 First CSA7000
2379 1 = /dev/ecsa1 Second CSA7000
2380 ...
2382 169 char Eracom CSA8000 PCI encryption adaptor
2383 0 = /dev/ecsa8-0 First CSA8000
2384 1 = /dev/ecsa8-1 Second CSA8000
2385 ...
2387 170 char AMI MegaRAC remote access controller
2388 0 = /dev/megarac0 First MegaRAC card
2389 1 = /dev/megarac1 Second MegaRAC card
2390 ...
2392 171 char Reserved for IEEE 1394 (Firewire)
2394 172 char Moxa Intellio serial card
2395 0 = /dev/ttyMX0 First Moxa port
2396 1 = /dev/ttyMX1 Second Moxa port
2397 ...
2398 127 = /dev/ttyMX127 128th Moxa port
2399 128 = /dev/moxactl Moxa control port
2401 173 char Moxa Intellio serial card - alternate devices
2402 0 = /dev/cumx0 Callout device for ttyMX0
2403 1 = /dev/cumx1 Callout device for ttyMX1
2404 ...
2405 127 = /dev/cumx127 Callout device for ttyMX127
2407 174 char SmartIO serial card
2408 0 = /dev/ttySI0 First SmartIO port
2409 1 = /dev/ttySI1 Second SmartIO port
2410 ...
2412 175 char SmartIO serial card - alternate devices
2413 0 = /dev/cusi0 Callout device for ttySI0
2414 1 = /dev/cusi1 Callout device for ttySI1
2415 ...
2417 176 char nCipher nFast PCI crypto accelerator
2418 0 = /dev/nfastpci0 First nFast PCI device
2419 1 = /dev/nfastpci1 First nFast PCI device
2420 ...
2422 177 char TI PCILynx memory spaces
2423 0 = /dev/pcilynx/aux0 AUX space of first PCILynx card
2424 ...
2425 15 = /dev/pcilynx/aux15 AUX space of 16th PCILynx card
2426 16 = /dev/pcilynx/rom0 ROM space of first PCILynx card
2427 ...
2428 31 = /dev/pcilynx/rom15 ROM space of 16th PCILynx card
2429 32 = /dev/pcilynx/ram0 RAM space of first PCILynx card
2430 ...
2431 47 = /dev/pcilynx/ram15 RAM space of 16th PCILynx card
2433 178 char Giganet cLAN1xxx virtual interface adapter
2434 0 = /dev/clanvi0 First cLAN adapter
2435 1 = /dev/clanvi1 Second cLAN adapter
2436 ...
2438 179 block MMC block devices
2439 0 = /dev/mmcblk0 First SD/MMC card
2440 1 = /dev/mmcblk0p1 First partition on first MMC card
2441 8 = /dev/mmcblk1 Second SD/MMC card
2442 ...
2444 The start of next SD/MMC card can be configured with
2445 CONFIG_MMC_BLOCK_MINORS, or overridden at boot/modprobe
2446 time using the mmcblk.perdev_minors option. That would
2447 bump the offset between each card to be the configured
2448 value instead of the default 8.
2450 179 char CCube DVXChip-based PCI products
2451 0 = /dev/dvxirq0 First DVX device
2452 1 = /dev/dvxirq1 Second DVX device
2453 ...
2455 180 char USB devices
2456 0 = /dev/usb/lp0 First USB printer
2457 ...
2458 15 = /dev/usb/lp15 16th USB printer
2459 48 = /dev/usb/scanner0 First USB scanner
2460 ...
2461 63 = /dev/usb/scanner15 16th USB scanner
2462 64 = /dev/usb/rio500 Diamond Rio 500
2463 65 = /dev/usb/usblcd USBLCD Interface (info@usblcd.de)
2464 66 = /dev/usb/cpad0 Synaptics cPad (mouse/LCD)
2465 96 = /dev/usb/hiddev0 1st USB HID device
2466 ...
2467 111 = /dev/usb/hiddev15 16th USB HID device
2468 112 = /dev/usb/auer0 1st auerswald ISDN device
2469 ...
2470 127 = /dev/usb/auer15 16th auerswald ISDN device
2471 128 = /dev/usb/brlvgr0 First Braille Voyager device
2472 ...
2473 131 = /dev/usb/brlvgr3 Fourth Braille Voyager device
2474 132 = /dev/usb/idmouse ID Mouse (fingerprint scanner) device
2475 133 = /dev/usb/sisusbvga1 First SiSUSB VGA device
2476 ...
2477 140 = /dev/usb/sisusbvga8 Eighth SISUSB VGA device
2478 144 = /dev/usb/lcd USB LCD device
2479 160 = /dev/usb/legousbtower0 1st USB Legotower device
2480 ...
2481 175 = /dev/usb/legousbtower15 16th USB Legotower device
2482 176 = /dev/usb/usbtmc1 First USB TMC device
2483 ...
2484 191 = /dev/usb/usbtmc16 16th USB TMC device
2485 192 = /dev/usb/yurex1 First USB Yurex device
2486 ...
2487 209 = /dev/usb/yurex16 16th USB Yurex device
2489 180 block USB block devices
2490 0 = /dev/uba First USB block device
2491 8 = /dev/ubb Second USB block device
2492 16 = /dev/ubc Third USB block device
2493 ...
2495 181 char Conrad Electronic parallel port radio clocks
2496 0 = /dev/pcfclock0 First Conrad radio clock
2497 1 = /dev/pcfclock1 Second Conrad radio clock
2498 ...
2500 182 char Picture Elements THR2 binarizer
2501 0 = /dev/pethr0 First THR2 board
2502 1 = /dev/pethr1 Second THR2 board
2503 ...
2505 183 char SST 5136-DN DeviceNet interface
2506 0 = /dev/ss5136dn0 First DeviceNet interface
2507 1 = /dev/ss5136dn1 Second DeviceNet interface
2508 ...
2510 This device used to be assigned to major number 144.
2511 It had to be moved due to an unfortunate conflict.
2513 184 char Picture Elements' video simulator/sender
2514 0 = /dev/pevss0 First sender board
2515 1 = /dev/pevss1 Second sender board
2516 ...
2518 185 char InterMezzo high availability file system
2519 0 = /dev/intermezzo0 First cache manager
2520 1 = /dev/intermezzo1 Second cache manager
2521 ...
2523 See http://web.archive.org/web/20080115195241/
2524 http://inter-mezzo.org/index.html
2526 186 char Object-based storage control device
2527 0 = /dev/obd0 First obd control device
2528 1 = /dev/obd1 Second obd control device
2529 ...
2531 See ftp://ftp.lustre.org/pub/obd for code and information.
2533 187 char DESkey hardware encryption device
2534 0 = /dev/deskey0 First DES key
2535 1 = /dev/deskey1 Second DES key
2536 ...
2538 188 char USB serial converters
2539 0 = /dev/ttyUSB0 First USB serial converter
2540 1 = /dev/ttyUSB1 Second USB serial converter
2541 ...
2543 189 char USB serial converters - alternate devices
2544 0 = /dev/cuusb0 Callout device for ttyUSB0
2545 1 = /dev/cuusb1 Callout device for ttyUSB1
2546 ...
2548 190 char Kansas City tracker/tuner card
2549 0 = /dev/kctt0 First KCT/T card
2550 1 = /dev/kctt1 Second KCT/T card
2551 ...
2553 191 char Reserved for PCMCIA
2555 192 char Kernel profiling interface
2556 0 = /dev/profile Profiling control device
2557 1 = /dev/profile0 Profiling device for CPU 0
2558 2 = /dev/profile1 Profiling device for CPU 1
2559 ...
2561 193 char Kernel event-tracing interface
2562 0 = /dev/trace Tracing control device
2563 1 = /dev/trace0 Tracing device for CPU 0
2564 2 = /dev/trace1 Tracing device for CPU 1
2565 ...
2567 194 char linVideoStreams (LINVS)
2568 0 = /dev/mvideo/status0 Video compression status
2569 1 = /dev/mvideo/stream0 Video stream
2570 2 = /dev/mvideo/frame0 Single compressed frame
2571 3 = /dev/mvideo/rawframe0 Raw uncompressed frame
2572 4 = /dev/mvideo/codec0 Direct codec access
2573 5 = /dev/mvideo/video4linux0 Video4Linux compatibility
2575 16 = /dev/mvideo/status1 Second device
2576 ...
2577 32 = /dev/mvideo/status2 Third device
2578 ...
2579 ...
2580 240 = /dev/mvideo/status15 16th device
2581 ...
2583 195 char Nvidia graphics devices
2584 0 = /dev/nvidia0 First Nvidia card
2585 1 = /dev/nvidia1 Second Nvidia card
2586 ...
2587 255 = /dev/nvidiactl Nvidia card control device
2589 196 char Tormenta T1 card
2590 0 = /dev/tor/0 Master control channel for all cards
2591 1 = /dev/tor/1 First DS0
2592 2 = /dev/tor/2 Second DS0
2593 ...
2594 48 = /dev/tor/48 48th DS0
2595 49 = /dev/tor/49 First pseudo-channel
2596 50 = /dev/tor/50 Second pseudo-channel
2597 ...
2599 197 char OpenTNF tracing facility
2600 0 = /dev/tnf/t0 Trace 0 data extraction
2601 1 = /dev/tnf/t1 Trace 1 data extraction
2602 ...
2603 128 = /dev/tnf/status Tracing facility status
2604 130 = /dev/tnf/trace Tracing device
2606 198 char Total Impact TPMP2 quad coprocessor PCI card
2607 0 = /dev/tpmp2/0 First card
2608 1 = /dev/tpmp2/1 Second card
2609 ...
2611 199 char Veritas volume manager (VxVM) volumes
2612 0 = /dev/vx/rdsk/*/* First volume
2613 1 = /dev/vx/rdsk/*/* Second volume
2614 ...
2616 199 block Veritas volume manager (VxVM) volumes
2617 0 = /dev/vx/dsk/*/* First volume
2618 1 = /dev/vx/dsk/*/* Second volume
2619 ...
2621 The namespace in these directories is maintained by
2622 the user space VxVM software.
2624 200 char Veritas VxVM configuration interface
2625 0 = /dev/vx/config Configuration access node
2626 1 = /dev/vx/trace Volume i/o trace access node
2627 2 = /dev/vx/iod Volume i/o daemon access node
2628 3 = /dev/vx/info Volume information access node
2629 4 = /dev/vx/task Volume tasks access node
2630 5 = /dev/vx/taskmon Volume tasks monitor daemon
2632 201 char Veritas VxVM dynamic multipathing driver
2633 0 = /dev/vx/rdmp/* First multipath device
2634 1 = /dev/vx/rdmp/* Second multipath device
2635 ...
2636 201 block Veritas VxVM dynamic multipathing driver
2637 0 = /dev/vx/dmp/* First multipath device
2638 1 = /dev/vx/dmp/* Second multipath device
2639 ...
2641 The namespace in these directories is maintained by
2642 the user space VxVM software.
2644 202 char CPU model-specific registers
2645 0 = /dev/cpu/0/msr MSRs on CPU 0
2646 1 = /dev/cpu/1/msr MSRs on CPU 1
2647 ...
2649 202 block Xen Virtual Block Device
2650 0 = /dev/xvda First Xen VBD whole disk
2651 16 = /dev/xvdb Second Xen VBD whole disk
2652 32 = /dev/xvdc Third Xen VBD whole disk
2653 ...
2654 240 = /dev/xvdp Sixteenth Xen VBD whole disk
2656 Partitions are handled in the same way as for IDE
2657 disks (see major number 3) except that the limit on
2658 partitions is 15.
2660 203 char CPU CPUID information
2661 0 = /dev/cpu/0/cpuid CPUID on CPU 0
2662 1 = /dev/cpu/1/cpuid CPUID on CPU 1
2663 ...
2665 204 char Low-density serial ports
2666 0 = /dev/ttyLU0 LinkUp Systems L72xx UART - port 0
2667 1 = /dev/ttyLU1 LinkUp Systems L72xx UART - port 1
2668 2 = /dev/ttyLU2 LinkUp Systems L72xx UART - port 2
2669 3 = /dev/ttyLU3 LinkUp Systems L72xx UART - port 3
2670 4 = /dev/ttyFB0 Intel Footbridge (ARM)
2671 5 = /dev/ttySA0 StrongARM builtin serial port 0
2672 6 = /dev/ttySA1 StrongARM builtin serial port 1
2673 7 = /dev/ttySA2 StrongARM builtin serial port 2
2674 8 = /dev/ttySC0 SCI serial port (SuperH) - port 0
2675 9 = /dev/ttySC1 SCI serial port (SuperH) - port 1
2676 10 = /dev/ttySC2 SCI serial port (SuperH) - port 2
2677 11 = /dev/ttySC3 SCI serial port (SuperH) - port 3
2678 12 = /dev/ttyFW0 Firmware console - port 0
2679 13 = /dev/ttyFW1 Firmware console - port 1
2680 14 = /dev/ttyFW2 Firmware console - port 2
2681 15 = /dev/ttyFW3 Firmware console - port 3
2682 16 = /dev/ttyAM0 ARM "AMBA" serial port 0
2683 ...
2684 31 = /dev/ttyAM15 ARM "AMBA" serial port 15
2685 32 = /dev/ttyDB0 DataBooster serial port 0
2686 ...
2687 39 = /dev/ttyDB7 DataBooster serial port 7
2688 40 = /dev/ttySG0 SGI Altix console port
2689 41 = /dev/ttySMX0 Motorola i.MX - port 0
2690 42 = /dev/ttySMX1 Motorola i.MX - port 1
2691 43 = /dev/ttySMX2 Motorola i.MX - port 2
2692 44 = /dev/ttyMM0 Marvell MPSC - port 0
2693 45 = /dev/ttyMM1 Marvell MPSC - port 1
2694 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
2695 ...
2696 47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
2697 50 = /dev/ttyIOC0 Altix serial card
2698 ...
2699 81 = /dev/ttyIOC31 Altix serial card
2700 82 = /dev/ttyVR0 NEC VR4100 series SIU
2701 83 = /dev/ttyVR1 NEC VR4100 series DSIU
2702 84 = /dev/ttyIOC84 Altix ioc4 serial card
2703 ...
2704 115 = /dev/ttyIOC115 Altix ioc4 serial card
2705 116 = /dev/ttySIOC0 Altix ioc3 serial card
2706 ...
2707 147 = /dev/ttySIOC31 Altix ioc3 serial card
2708 148 = /dev/ttyPSC0 PPC PSC - port 0
2709 ...
2710 153 = /dev/ttyPSC5 PPC PSC - port 5
2711 154 = /dev/ttyAT0 ATMEL serial port 0
2712 ...
2713 169 = /dev/ttyAT15 ATMEL serial port 15
2714 170 = /dev/ttyNX0 Hilscher netX serial port 0
2715 ...
2716 185 = /dev/ttyNX15 Hilscher netX serial port 15
2717 186 = /dev/ttyJ0 JTAG1 DCC protocol based serial port emulation
2718 187 = /dev/ttyUL0 Xilinx uartlite - port 0
2719 ...
2720 190 = /dev/ttyUL3 Xilinx uartlite - port 3
2721 191 = /dev/xvc0 Xen virtual console - port 0
2722 192 = /dev/ttyPZ0 pmac_zilog - port 0
2723 ...
2724 195 = /dev/ttyPZ3 pmac_zilog - port 3
2725 196 = /dev/ttyTX0 TX39/49 serial port 0
2726 ...
2727 204 = /dev/ttyTX7 TX39/49 serial port 7
2728 205 = /dev/ttySC0 SC26xx serial port 0
2729 206 = /dev/ttySC1 SC26xx serial port 1
2730 207 = /dev/ttySC2 SC26xx serial port 2
2731 208 = /dev/ttySC3 SC26xx serial port 3
2732 209 = /dev/ttyMAX0 MAX3100 serial port 0
2733 210 = /dev/ttyMAX1 MAX3100 serial port 1
2734 211 = /dev/ttyMAX2 MAX3100 serial port 2
2735 212 = /dev/ttyMAX3 MAX3100 serial port 3
2737 205 char Low-density serial ports (alternate device)
2738 0 = /dev/culu0 Callout device for ttyLU0
2739 1 = /dev/culu1 Callout device for ttyLU1
2740 2 = /dev/culu2 Callout device for ttyLU2
2741 3 = /dev/culu3 Callout device for ttyLU3
2742 4 = /dev/cufb0 Callout device for ttyFB0
2743 5 = /dev/cusa0 Callout device for ttySA0
2744 6 = /dev/cusa1 Callout device for ttySA1
2745 7 = /dev/cusa2 Callout device for ttySA2
2746 8 = /dev/cusc0 Callout device for ttySC0
2747 9 = /dev/cusc1 Callout device for ttySC1
2748 10 = /dev/cusc2 Callout device for ttySC2
2749 11 = /dev/cusc3 Callout device for ttySC3
2750 12 = /dev/cufw0 Callout device for ttyFW0
2751 13 = /dev/cufw1 Callout device for ttyFW1
2752 14 = /dev/cufw2 Callout device for ttyFW2
2753 15 = /dev/cufw3 Callout device for ttyFW3
2754 16 = /dev/cuam0 Callout device for ttyAM0
2755 ...
2756 31 = /dev/cuam15 Callout device for ttyAM15
2757 32 = /dev/cudb0 Callout device for ttyDB0
2758 ...
2759 39 = /dev/cudb7 Callout device for ttyDB7
2760 40 = /dev/cusg0 Callout device for ttySG0
2761 41 = /dev/ttycusmx0 Callout device for ttySMX0
2762 42 = /dev/ttycusmx1 Callout device for ttySMX1
2763 43 = /dev/ttycusmx2 Callout device for ttySMX2
2764 46 = /dev/cucpm0 Callout device for ttyCPM0
2765 ...
2766 49 = /dev/cucpm5 Callout device for ttyCPM5
2767 50 = /dev/cuioc40 Callout device for ttyIOC40
2768 ...
2769 81 = /dev/cuioc431 Callout device for ttyIOC431
2770 82 = /dev/cuvr0 Callout device for ttyVR0
2771 83 = /dev/cuvr1 Callout device for ttyVR1
2773 206 char OnStream SC-x0 tape devices
2774 0 = /dev/osst0 First OnStream SCSI tape, mode 0
2775 1 = /dev/osst1 Second OnStream SCSI tape, mode 0
2776 ...
2777 32 = /dev/osst0l First OnStream SCSI tape, mode 1
2778 33 = /dev/osst1l Second OnStream SCSI tape, mode 1
2779 ...
2780 64 = /dev/osst0m First OnStream SCSI tape, mode 2
2781 65 = /dev/osst1m Second OnStream SCSI tape, mode 2
2782 ...
2783 96 = /dev/osst0a First OnStream SCSI tape, mode 3
2784 97 = /dev/osst1a Second OnStream SCSI tape, mode 3
2785 ...
2786 128 = /dev/nosst0 No rewind version of /dev/osst0
2787 129 = /dev/nosst1 No rewind version of /dev/osst1
2788 ...
2789 160 = /dev/nosst0l No rewind version of /dev/osst0l
2790 161 = /dev/nosst1l No rewind version of /dev/osst1l
2791 ...
2792 192 = /dev/nosst0m No rewind version of /dev/osst0m
2793 193 = /dev/nosst1m No rewind version of /dev/osst1m
2794 ...
2795 224 = /dev/nosst0a No rewind version of /dev/osst0a
2796 225 = /dev/nosst1a No rewind version of /dev/osst1a
2797 ...
2799 The OnStream SC-x0 SCSI tapes do not support the
2800 standard SCSI SASD command set and therefore need
2801 their own driver "osst". Note that the IDE, USB (and
2802 maybe ParPort) versions may be driven via ide-scsi or
2803 usb-storage SCSI emulation and this osst device and
2804 driver as well. The ADR-x0 drives are QIC-157
2805 compliant and don't need osst.
2807 207 char Compaq ProLiant health feature indicate
2808 0 = /dev/cpqhealth/cpqw Redirector interface
2809 1 = /dev/cpqhealth/crom EISA CROM
2810 2 = /dev/cpqhealth/cdt Data Table
2811 3 = /dev/cpqhealth/cevt Event Log
2812 4 = /dev/cpqhealth/casr Automatic Server Recovery
2813 5 = /dev/cpqhealth/cecc ECC Memory
2814 6 = /dev/cpqhealth/cmca Machine Check Architecture
2815 7 = /dev/cpqhealth/ccsm Deprecated CDT
2816 8 = /dev/cpqhealth/cnmi NMI Handling
2817 9 = /dev/cpqhealth/css Sideshow Management
2818 10 = /dev/cpqhealth/cram CMOS interface
2819 11 = /dev/cpqhealth/cpci PCI IRQ interface
2821 208 char User space serial ports
2822 0 = /dev/ttyU0 First user space serial port
2823 1 = /dev/ttyU1 Second user space serial port
2824 ...
2826 209 char User space serial ports (alternate devices)
2827 0 = /dev/cuu0 Callout device for ttyU0
2828 1 = /dev/cuu1 Callout device for ttyU1
2829 ...
2831 210 char SBE, Inc. sync/async serial card
2832 0 = /dev/sbei/wxcfg0 Configuration device for board 0
2833 1 = /dev/sbei/dld0 Download device for board 0
2834 2 = /dev/sbei/wan00 WAN device, port 0, board 0
2835 3 = /dev/sbei/wan01 WAN device, port 1, board 0
2836 4 = /dev/sbei/wan02 WAN device, port 2, board 0
2837 5 = /dev/sbei/wan03 WAN device, port 3, board 0
2838 6 = /dev/sbei/wanc00 WAN clone device, port 0, board 0
2839 7 = /dev/sbei/wanc01 WAN clone device, port 1, board 0
2840 8 = /dev/sbei/wanc02 WAN clone device, port 2, board 0
2841 9 = /dev/sbei/wanc03 WAN clone device, port 3, board 0
2842 10 = /dev/sbei/wxcfg1 Configuration device for board 1
2843 11 = /dev/sbei/dld1 Download device for board 1
2844 12 = /dev/sbei/wan10 WAN device, port 0, board 1
2845 13 = /dev/sbei/wan11 WAN device, port 1, board 1
2846 14 = /dev/sbei/wan12 WAN device, port 2, board 1
2847 15 = /dev/sbei/wan13 WAN device, port 3, board 1
2848 16 = /dev/sbei/wanc10 WAN clone device, port 0, board 1
2849 17 = /dev/sbei/wanc11 WAN clone device, port 1, board 1
2850 18 = /dev/sbei/wanc12 WAN clone device, port 2, board 1
2851 19 = /dev/sbei/wanc13 WAN clone device, port 3, board 1
2852 ...
2854 Yes, each board is really spaced 10 (decimal) apart.
2856 211 char Addinum CPCI1500 digital I/O card
2857 0 = /dev/addinum/cpci1500/0 First CPCI1500 card
2858 1 = /dev/addinum/cpci1500/1 Second CPCI1500 card
2859 ...
2861 212 char LinuxTV.org DVB driver subsystem
2862 0 = /dev/dvb/adapter0/video0 first video decoder of first card
2863 1 = /dev/dvb/adapter0/audio0 first audio decoder of first card
2864 2 = /dev/dvb/adapter0/sec0 (obsolete/unused)
2865 3 = /dev/dvb/adapter0/frontend0 first frontend device of first card
2866 4 = /dev/dvb/adapter0/demux0 first demux device of first card
2867 5 = /dev/dvb/adapter0/dvr0 first digital video recoder device of first card
2868 6 = /dev/dvb/adapter0/ca0 first common access port of first card
2869 7 = /dev/dvb/adapter0/net0 first network device of first card
2870 8 = /dev/dvb/adapter0/osd0 first on-screen-display device of first card
2871 9 = /dev/dvb/adapter0/video1 second video decoder of first card
2872 ...
2873 64 = /dev/dvb/adapter1/video0 first video decoder of second card
2874 ...
2875 128 = /dev/dvb/adapter2/video0 first video decoder of third card
2876 ...
2877 196 = /dev/dvb/adapter3/video0 first video decoder of fourth card
2879 216 char Bluetooth RFCOMM TTY devices
2880 0 = /dev/rfcomm0 First Bluetooth RFCOMM TTY device
2881 1 = /dev/rfcomm1 Second Bluetooth RFCOMM TTY device
2882 ...
2884 217 char Bluetooth RFCOMM TTY devices (alternate devices)
2885 0 = /dev/curf0 Callout device for rfcomm0
2886 1 = /dev/curf1 Callout device for rfcomm1
2887 ...
2889 218 char The Logical Company bus Unibus/Qbus adapters
2890 0 = /dev/logicalco/bci/0 First bus adapter
2891 1 = /dev/logicalco/bci/1 First bus adapter
2892 ...
2894 219 char The Logical Company DCI-1300 digital I/O card
2895 0 = /dev/logicalco/dci1300/0 First DCI-1300 card
2896 1 = /dev/logicalco/dci1300/1 Second DCI-1300 card
2897 ...
2899 220 char Myricom Myrinet "GM" board
2900 0 = /dev/myricom/gm0 First Myrinet GM board
2901 1 = /dev/myricom/gmp0 First board "root access"
2902 2 = /dev/myricom/gm1 Second Myrinet GM board
2903 3 = /dev/myricom/gmp1 Second board "root access"
2904 ...
2906 221 char VME bus
2907 0 = /dev/bus/vme/m0 First master image
2908 1 = /dev/bus/vme/m1 Second master image
2909 2 = /dev/bus/vme/m2 Third master image
2910 3 = /dev/bus/vme/m3 Fourth master image
2911 4 = /dev/bus/vme/s0 First slave image
2912 5 = /dev/bus/vme/s1 Second slave image
2913 6 = /dev/bus/vme/s2 Third slave image
2914 7 = /dev/bus/vme/s3 Fourth slave image
2915 8 = /dev/bus/vme/ctl Control
2917 It is expected that all VME bus drivers will use the
2918 same interface. For interface documentation see
2919 http://www.vmelinux.org/.
2921 224 char A2232 serial card
2922 0 = /dev/ttyY0 First A2232 port
2923 1 = /dev/ttyY1 Second A2232 port
2924 ...
2926 225 char A2232 serial card (alternate devices)
2927 0 = /dev/cuy0 Callout device for ttyY0
2928 1 = /dev/cuy1 Callout device for ttyY1
2929 ...
2931 226 char Direct Rendering Infrastructure (DRI)
2932 0 = /dev/dri/card0 First graphics card
2933 1 = /dev/dri/card1 Second graphics card
2934 ...
2936 227 char IBM 3270 terminal Unix tty access
2937 1 = /dev/3270/tty1 First 3270 terminal
2938 2 = /dev/3270/tty2 Seconds 3270 terminal
2939 ...
2941 228 char IBM 3270 terminal block-mode access
2942 0 = /dev/3270/tub Controlling interface
2943 1 = /dev/3270/tub1 First 3270 terminal
2944 2 = /dev/3270/tub2 Second 3270 terminal
2945 ...
2947 229 char IBM iSeries/pSeries virtual console
2948 0 = /dev/hvc0 First console port
2949 1 = /dev/hvc1 Second console port
2950 ...
2952 230 char IBM iSeries virtual tape
2953 0 = /dev/iseries/vt0 First virtual tape, mode 0
2954 1 = /dev/iseries/vt1 Second virtual tape, mode 0
2955 ...
2956 32 = /dev/iseries/vt0l First virtual tape, mode 1
2957 33 = /dev/iseries/vt1l Second virtual tape, mode 1
2958 ...
2959 64 = /dev/iseries/vt0m First virtual tape, mode 2
2960 65 = /dev/iseries/vt1m Second virtual tape, mode 2
2961 ...
2962 96 = /dev/iseries/vt0a First virtual tape, mode 3
2963 97 = /dev/iseries/vt1a Second virtual tape, mode 3
2964 ...
2965 128 = /dev/iseries/nvt0 First virtual tape, mode 0, no rewind
2966 129 = /dev/iseries/nvt1 Second virtual tape, mode 0, no rewind
2967 ...
2968 160 = /dev/iseries/nvt0l First virtual tape, mode 1, no rewind
2969 161 = /dev/iseries/nvt1l Second virtual tape, mode 1, no rewind
2970 ...
2971 192 = /dev/iseries/nvt0m First virtual tape, mode 2, no rewind
2972 193 = /dev/iseries/nvt1m Second virtual tape, mode 2, no rewind
2973 ...
2974 224 = /dev/iseries/nvt0a First virtual tape, mode 3, no rewind
2975 225 = /dev/iseries/nvt1a Second virtual tape, mode 3, no rewind
2976 ...
2978 "No rewind" refers to the omission of the default
2979 automatic rewind on device close. The MTREW or MTOFFL
2980 ioctl()'s can be used to rewind the tape regardless of
2981 the device used to access it.
2983 231 char InfiniBand
2984 0 = /dev/infiniband/umad0
2985 1 = /dev/infiniband/umad1
2986 ...
2987 63 = /dev/infiniband/umad63 63rd InfiniBandMad device
2988 64 = /dev/infiniband/issm0 First InfiniBand IsSM device
2989 65 = /dev/infiniband/issm1 Second InfiniBand IsSM device
2990 ...
2991 127 = /dev/infiniband/issm63 63rd InfiniBand IsSM device
2992 128 = /dev/infiniband/uverbs0 First InfiniBand verbs device
2993 129 = /dev/infiniband/uverbs1 Second InfiniBand verbs device
2994 ...
2995 159 = /dev/infiniband/uverbs31 31st InfiniBand verbs device
2997 232 char Biometric Devices
2998 0 = /dev/biometric/sensor0/fingerprint first fingerprint sensor on first device
2999 1 = /dev/biometric/sensor0/iris first iris sensor on first device
3000 2 = /dev/biometric/sensor0/retina first retina sensor on first device
3001 3 = /dev/biometric/sensor0/voiceprint first voiceprint sensor on first device
3002 4 = /dev/biometric/sensor0/facial first facial sensor on first device
3003 5 = /dev/biometric/sensor0/hand first hand sensor on first device
3004 ...
3005 10 = /dev/biometric/sensor1/fingerprint first fingerprint sensor on second device
3006 ...
3007 20 = /dev/biometric/sensor2/fingerprint first fingerprint sensor on third device
3008 ...
3010 233 char PathScale InfiniPath interconnect
3011 0 = /dev/ipath Primary device for programs (any unit)
3012 1 = /dev/ipath0 Access specifically to unit 0
3013 2 = /dev/ipath1 Access specifically to unit 1
3014 ...
3015 4 = /dev/ipath3 Access specifically to unit 3
3016 129 = /dev/ipath_sma Device used by Subnet Management Agent
3017 130 = /dev/ipath_diag Device used by diagnostics programs
3019 234-254 char RESERVED FOR DYNAMIC ASSIGNMENT
3020 Character devices that request a dynamic allocation of major number will
3021 take numbers starting from 254 and downward.
3023 240-254 block LOCAL/EXPERIMENTAL USE
3024 Allocated for local/experimental use. For devices not
3025 assigned official numbers, these ranges should be
3026 used in order to avoid conflicting with future assignments.
3028 255 char RESERVED
3030 255 block RESERVED
3032 This major is reserved to assist the expansion to a
3033 larger number space. No device nodes with this major
3034 should ever be created on the filesystem.
3035 (This is probably not true anymore, but I'll leave it
3036 for now /Torben)
3038 ---LARGE MAJORS!!!!!---
3040 256 char Equinox SST multi-port serial boards
3041 0 = /dev/ttyEQ0 First serial port on first Equinox SST board
3042 127 = /dev/ttyEQ127 Last serial port on first Equinox SST board
3043 128 = /dev/ttyEQ128 First serial port on second Equinox SST board
3044 ...
3045 1027 = /dev/ttyEQ1027 Last serial port on eighth Equinox SST board
3047 256 block Resident Flash Disk Flash Translation Layer
3048 0 = /dev/rfda First RFD FTL layer
3049 16 = /dev/rfdb Second RFD FTL layer
3050 ...
3051 240 = /dev/rfdp 16th RFD FTL layer
3053 257 char Phoenix Technologies Cryptographic Services Driver
3054 0 = /dev/ptlsec Crypto Services Driver
3056 257 block SSFDC Flash Translation Layer filesystem
3057 0 = /dev/ssfdca First SSFDC layer
3058 8 = /dev/ssfdcb Second SSFDC layer
3059 16 = /dev/ssfdcc Third SSFDC layer
3060 24 = /dev/ssfdcd 4th SSFDC layer
3061 32 = /dev/ssfdce 5th SSFDC layer
3062 40 = /dev/ssfdcf 6th SSFDC layer
3063 48 = /dev/ssfdcg 7th SSFDC layer
3064 56 = /dev/ssfdch 8th SSFDC layer
3066 258 block ROM/Flash read-only translation layer
3067 0 = /dev/blockrom0 First ROM card's translation layer interface
3068 1 = /dev/blockrom1 Second ROM card's translation layer interface
3069 ...
3071 259 block Block Extended Major
3072 Used dynamically to hold additional partition minor
3073 numbers and allow large numbers of partitions per device
3075 259 char FPGA configuration interfaces
3076 0 = /dev/icap0 First Xilinx internal configuration
3077 1 = /dev/icap1 Second Xilinx internal configuration
3079 260 char OSD (Object-based-device) SCSI Device
3080 0 = /dev/osd0 First OSD Device
3081 1 = /dev/osd1 Second OSD Device
3082 ...
3083 255 = /dev/osd255 256th OSD Device
3085 384-511 char RESERVED FOR DYNAMIC ASSIGNMENT
3086 Character devices that request a dynamic allocation of major
3087 number will take numbers starting from 511 and downward,
3088 once the 234-254 range is full.