Documentation/scsi/scsi-parameters.txt

   1                           SCSI Kernel Parameters
   2                           ~~~~~~~~~~~~~~~~~~~~~~
   3
   4 See Documentation/admin-guide/kernel-parameters.rst for general information on
   5 specifying module parameters.
   6
   7 This document may not be entirely up to date and comprehensive. The command
   8 "modinfo -p ${modulename}" shows a current list of all parameters of a loadable
   9 module. Loadable modules, after being loaded into the running kernel, also
  10 reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
  11 parameters may be changed at runtime by the command
  12 "echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
  13
  14
  15         advansys=       [HW,SCSI]
  16                         See header of drivers/scsi/advansys.c.
  17
  18         aha152x=        [HW,SCSI]
  19                         See Documentation/scsi/aha152x.txt.
  20
  21         aha1542=        [HW,SCSI]
  22                         Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
  23
  24         aic7xxx=        [HW,SCSI]
  25                         See Documentation/scsi/aic7xxx.txt.
  26
  27         aic79xx=        [HW,SCSI]
  28                         See Documentation/scsi/aic79xx.txt.
  29
  30         atascsi=        [HW,SCSI]
  31                         See drivers/scsi/atari_scsi.c.
  32
  33         BusLogic=       [HW,SCSI]
  34                         See drivers/scsi/BusLogic.c, comment before function
  35                         BusLogic_ParseDriverOptions().
  36
  37         eata=           [HW,SCSI]
  38
  39         fdomain=        [HW,SCSI]
  40                         See header of drivers/scsi/fdomain.c.
  41
  42         gdth=           [HW,SCSI]
  43                         See header of drivers/scsi/gdth.c.
  44
  45         gvp11=          [HW,SCSI]
  46
  47         ips=            [HW,SCSI] Adaptec / IBM ServeRAID controller
  48                         See header of drivers/scsi/ips.c.
  49
  50         mac5380=        [HW,SCSI]
  51                         See drivers/scsi/mac_scsi.c.
  52
  53         scsi_mod.max_luns=
  54                         [SCSI] Maximum number of LUNs to probe.
  55                         Should be between 1 and 2^32-1.
  56
  57         scsi_mod.max_report_luns=
  58                         [SCSI] Maximum number of LUNs received.
  59                         Should be between 1 and 16384.
  60
  61         NCR_D700=       [HW,SCSI]
  62                         See header of drivers/scsi/NCR_D700.c.
  63
  64         ncr5380=        [HW,SCSI]
  65                         See Documentation/scsi/g_NCR5380.txt.
  66
  67         ncr53c400=      [HW,SCSI]
  68                         See Documentation/scsi/g_NCR5380.txt.
  69
  70         ncr53c400a=     [HW,SCSI]
  71                         See Documentation/scsi/g_NCR5380.txt.
  72
  73         ncr53c406a=     [HW,SCSI]
  74
  75         ncr53c8xx=      [HW,SCSI]
  76
  77         osst=           [HW,SCSI] SCSI Tape Driver
  78                         Format: <buffer_size>,<write_threshold>
  79                         See also Documentation/scsi/st.txt.
  80
  81         scsi_debug_*=   [SCSI]
  82                         See drivers/scsi/scsi_debug.c.
  83
  84         scsi_mod.default_dev_flags=
  85                         [SCSI] SCSI default device flags
  86                         Format: <integer>
  87
  88         scsi_mod.dev_flags=
  89                         [SCSI] Black/white list entry for vendor and model
  90                         Format: <vendor>:<model>:<flags>
  91                         (flags are integer value)
  92
  93         scsi_mod.scsi_logging_level=
  94                         [SCSI] a bit mask of logging levels
  95                         See drivers/scsi/scsi_logging.h for bits.  Also
  96                         settable via sysctl at dev.scsi.logging_level
  97                         (/proc/sys/dev/scsi/logging_level).
  98                         There is also a nice 'scsi_logging_level' script in the
  99                         S390-tools package, available for download at
 100                         http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
 101
 102         scsi_mod.scan=  [SCSI] sync (default) scans SCSI busses as they are
 103                         discovered.  async scans them in kernel threads,
 104                         allowing boot to proceed.  none ignores them, expecting
 105                         user space to do the scan.
 106
 107         sim710=         [SCSI,HW]
 108                         See header of drivers/scsi/sim710.c.
 109
 110         st=             [HW,SCSI] SCSI tape parameters (buffers, etc.)
 111                         See Documentation/scsi/st.txt.
 112
 113         sym53c416=      [HW,SCSI]
 114                         See header of drivers/scsi/sym53c416.c.
 115
 116         tmscsim=        [HW,SCSI]
 117                         See comment before function dc390_setup() in
 118                         drivers/scsi/tmscsim.c.
 119
 120         wd33c93=        [HW,SCSI]
 121                         See header of drivers/scsi/wd33c93.c.