ARC: [plat-eznps] spinlock aware for MTM
[linux/fpc-iii.git] / drivers / usb / renesas_usbhs / pipe.c
blob9396a8c14af80104e8841d98ca30d27ffb1fd88d
1 /*
2 * Renesas USB driver
4 * Copyright (C) 2011 Renesas Solutions Corp.
5 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
17 #include <linux/delay.h>
18 #include <linux/slab.h>
19 #include "common.h"
20 #include "pipe.h"
23 * macros
25 #define usbhsp_addr_offset(p) ((usbhs_pipe_number(p) - 1) * 2)
27 #define usbhsp_flags_set(p, f) ((p)->flags |= USBHS_PIPE_FLAGS_##f)
28 #define usbhsp_flags_clr(p, f) ((p)->flags &= ~USBHS_PIPE_FLAGS_##f)
29 #define usbhsp_flags_has(p, f) ((p)->flags & USBHS_PIPE_FLAGS_##f)
30 #define usbhsp_flags_init(p) do {(p)->flags = 0; } while (0)
33 * for debug
35 static char *usbhsp_pipe_name[] = {
36 [USB_ENDPOINT_XFER_CONTROL] = "DCP",
37 [USB_ENDPOINT_XFER_BULK] = "BULK",
38 [USB_ENDPOINT_XFER_INT] = "INT",
39 [USB_ENDPOINT_XFER_ISOC] = "ISO",
42 char *usbhs_pipe_name(struct usbhs_pipe *pipe)
44 return usbhsp_pipe_name[usbhs_pipe_type(pipe)];
47 static struct renesas_usbhs_driver_pipe_config
48 *usbhsp_get_pipe_config(struct usbhs_priv *priv, int pipe_num)
50 struct renesas_usbhs_driver_pipe_config *pipe_configs =
51 usbhs_get_dparam(priv, pipe_configs);
53 return &pipe_configs[pipe_num];
57 * DCPCTR/PIPEnCTR functions
59 static void usbhsp_pipectrl_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
61 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
62 int offset = usbhsp_addr_offset(pipe);
64 if (usbhs_pipe_is_dcp(pipe))
65 usbhs_bset(priv, DCPCTR, mask, val);
66 else
67 usbhs_bset(priv, PIPEnCTR + offset, mask, val);
70 static u16 usbhsp_pipectrl_get(struct usbhs_pipe *pipe)
72 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
73 int offset = usbhsp_addr_offset(pipe);
75 if (usbhs_pipe_is_dcp(pipe))
76 return usbhs_read(priv, DCPCTR);
77 else
78 return usbhs_read(priv, PIPEnCTR + offset);
82 * DCP/PIPE functions
84 static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe,
85 u16 dcp_reg, u16 pipe_reg,
86 u16 mask, u16 val)
88 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
90 if (usbhs_pipe_is_dcp(pipe))
91 usbhs_bset(priv, dcp_reg, mask, val);
92 else
93 usbhs_bset(priv, pipe_reg, mask, val);
96 static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe,
97 u16 dcp_reg, u16 pipe_reg)
99 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
101 if (usbhs_pipe_is_dcp(pipe))
102 return usbhs_read(priv, dcp_reg);
103 else
104 return usbhs_read(priv, pipe_reg);
108 * DCPCFG/PIPECFG functions
110 static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
112 __usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val);
115 static u16 usbhsp_pipe_cfg_get(struct usbhs_pipe *pipe)
117 return __usbhsp_pipe_xxx_get(pipe, DCPCFG, PIPECFG);
121 * PIPEnTRN/PIPEnTRE functions
123 static void usbhsp_pipe_trn_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
125 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
126 struct device *dev = usbhs_priv_to_dev(priv);
127 int num = usbhs_pipe_number(pipe);
128 u16 reg;
131 * It is impossible to calculate address,
132 * since PIPEnTRN addresses were mapped randomly.
134 #define CASE_PIPExTRN(a) \
135 case 0x ## a: \
136 reg = PIPE ## a ## TRN; \
137 break;
139 switch (num) {
140 CASE_PIPExTRN(1);
141 CASE_PIPExTRN(2);
142 CASE_PIPExTRN(3);
143 CASE_PIPExTRN(4);
144 CASE_PIPExTRN(5);
145 CASE_PIPExTRN(B);
146 CASE_PIPExTRN(C);
147 CASE_PIPExTRN(D);
148 CASE_PIPExTRN(E);
149 CASE_PIPExTRN(F);
150 CASE_PIPExTRN(9);
151 CASE_PIPExTRN(A);
152 default:
153 dev_err(dev, "unknown pipe (%d)\n", num);
154 return;
156 __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val);
159 static void usbhsp_pipe_tre_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
161 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
162 struct device *dev = usbhs_priv_to_dev(priv);
163 int num = usbhs_pipe_number(pipe);
164 u16 reg;
167 * It is impossible to calculate address,
168 * since PIPEnTRE addresses were mapped randomly.
170 #define CASE_PIPExTRE(a) \
171 case 0x ## a: \
172 reg = PIPE ## a ## TRE; \
173 break;
175 switch (num) {
176 CASE_PIPExTRE(1);
177 CASE_PIPExTRE(2);
178 CASE_PIPExTRE(3);
179 CASE_PIPExTRE(4);
180 CASE_PIPExTRE(5);
181 CASE_PIPExTRE(B);
182 CASE_PIPExTRE(C);
183 CASE_PIPExTRE(D);
184 CASE_PIPExTRE(E);
185 CASE_PIPExTRE(F);
186 CASE_PIPExTRE(9);
187 CASE_PIPExTRE(A);
188 default:
189 dev_err(dev, "unknown pipe (%d)\n", num);
190 return;
193 __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val);
197 * PIPEBUF
199 static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
201 if (usbhs_pipe_is_dcp(pipe))
202 return;
204 __usbhsp_pipe_xxx_set(pipe, 0, PIPEBUF, mask, val);
208 * DCPMAXP/PIPEMAXP
210 static void usbhsp_pipe_maxp_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
212 __usbhsp_pipe_xxx_set(pipe, DCPMAXP, PIPEMAXP, mask, val);
216 * pipe control functions
218 static void usbhsp_pipe_select(struct usbhs_pipe *pipe)
220 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
223 * On pipe, this is necessary before
224 * accesses to below registers.
226 * PIPESEL : usbhsp_pipe_select
227 * PIPECFG : usbhsp_pipe_cfg_xxx
228 * PIPEBUF : usbhsp_pipe_buf_xxx
229 * PIPEMAXP : usbhsp_pipe_maxp_xxx
230 * PIPEPERI
234 * if pipe is dcp, no pipe is selected.
235 * it is no problem, because dcp have its register
237 usbhs_write(priv, PIPESEL, 0xF & usbhs_pipe_number(pipe));
240 static int usbhsp_pipe_barrier(struct usbhs_pipe *pipe)
242 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
243 int timeout = 1024;
244 u16 mask = usbhs_mod_is_host(priv) ? (CSSTS | PID_MASK) : PID_MASK;
247 * make sure....
249 * Modify these bits when CSSTS = 0, PID = NAK, and no pipe number is
250 * specified by the CURPIPE bits.
251 * When changing the setting of this bit after changing
252 * the PID bits for the selected pipe from BUF to NAK,
253 * check that CSSTS = 0 and PBUSY = 0.
257 * CURPIPE bit = 0
259 * see also
260 * "Operation"
261 * - "Pipe Control"
262 * - "Pipe Control Registers Switching Procedure"
264 usbhs_write(priv, CFIFOSEL, 0);
265 usbhs_pipe_disable(pipe);
267 do {
268 if (!(usbhsp_pipectrl_get(pipe) & mask))
269 return 0;
271 udelay(10);
273 } while (timeout--);
275 return -EBUSY;
278 int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe)
280 u16 val;
282 val = usbhsp_pipectrl_get(pipe);
283 if (val & BSTS)
284 return 0;
286 return -EBUSY;
290 * PID ctrl
292 static void __usbhsp_pid_try_nak_if_stall(struct usbhs_pipe *pipe)
294 u16 pid = usbhsp_pipectrl_get(pipe);
296 pid &= PID_MASK;
299 * see
300 * "Pipe n Control Register" - "PID"
302 switch (pid) {
303 case PID_STALL11:
304 usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10);
305 /* fall-through */
306 case PID_STALL10:
307 usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK);
311 void usbhs_pipe_disable(struct usbhs_pipe *pipe)
313 int timeout = 1024;
314 u16 val;
316 /* see "Pipe n Control Register" - "PID" */
317 __usbhsp_pid_try_nak_if_stall(pipe);
319 usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK);
321 do {
322 val = usbhsp_pipectrl_get(pipe);
323 val &= PBUSY;
324 if (!val)
325 break;
327 udelay(10);
328 } while (timeout--);
331 void usbhs_pipe_enable(struct usbhs_pipe *pipe)
333 /* see "Pipe n Control Register" - "PID" */
334 __usbhsp_pid_try_nak_if_stall(pipe);
336 usbhsp_pipectrl_set(pipe, PID_MASK, PID_BUF);
339 void usbhs_pipe_stall(struct usbhs_pipe *pipe)
341 u16 pid = usbhsp_pipectrl_get(pipe);
343 pid &= PID_MASK;
346 * see
347 * "Pipe n Control Register" - "PID"
349 switch (pid) {
350 case PID_NAK:
351 usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10);
352 break;
353 case PID_BUF:
354 usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL11);
355 break;
359 int usbhs_pipe_is_stall(struct usbhs_pipe *pipe)
361 u16 pid = usbhsp_pipectrl_get(pipe) & PID_MASK;
363 return (int)(pid == PID_STALL10 || pid == PID_STALL11);
366 void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len)
368 if (!usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
369 return;
372 * clear and disable transfer counter for IN/OUT pipe
374 usbhsp_pipe_tre_set(pipe, TRCLR | TRENB, TRCLR);
377 * Only IN direction bulk pipe can use transfer count.
378 * Without using this function,
379 * received data will break if it was large data size.
380 * see PIPEnTRN/PIPEnTRE for detail
382 if (usbhs_pipe_is_dir_in(pipe)) {
383 int maxp = usbhs_pipe_get_maxpacket(pipe);
385 usbhsp_pipe_trn_set(pipe, 0xffff, DIV_ROUND_UP(len, maxp));
386 usbhsp_pipe_tre_set(pipe, TRENB, TRENB); /* enable */
392 * pipe setup
394 static int usbhsp_setup_pipecfg(struct usbhs_pipe *pipe, int is_host,
395 int dir_in, u16 *pipecfg)
397 u16 type = 0;
398 u16 bfre = 0;
399 u16 dblb = 0;
400 u16 cntmd = 0;
401 u16 dir = 0;
402 u16 epnum = 0;
403 u16 shtnak = 0;
404 u16 type_array[] = {
405 [USB_ENDPOINT_XFER_BULK] = TYPE_BULK,
406 [USB_ENDPOINT_XFER_INT] = TYPE_INT,
407 [USB_ENDPOINT_XFER_ISOC] = TYPE_ISO,
410 if (usbhs_pipe_is_dcp(pipe))
411 return -EINVAL;
414 * PIPECFG
416 * see
417 * - "Register Descriptions" - "PIPECFG" register
418 * - "Features" - "Pipe configuration"
419 * - "Operation" - "Pipe Control"
422 /* TYPE */
423 type = type_array[usbhs_pipe_type(pipe)];
425 /* BFRE */
426 if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) ||
427 usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
428 bfre = 0; /* FIXME */
430 /* DBLB: see usbhs_pipe_config_update() */
432 /* CNTMD */
433 if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
434 cntmd = 0; /* FIXME */
436 /* DIR */
437 if (dir_in)
438 usbhsp_flags_set(pipe, IS_DIR_HOST);
440 if (!!is_host ^ !!dir_in)
441 dir |= DIR_OUT;
443 if (!dir)
444 usbhsp_flags_set(pipe, IS_DIR_IN);
446 /* SHTNAK */
447 if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) &&
448 !dir)
449 shtnak = SHTNAK;
451 /* EPNUM */
452 epnum = 0; /* see usbhs_pipe_config_update() */
453 *pipecfg = type |
454 bfre |
455 dblb |
456 cntmd |
457 dir |
458 shtnak |
459 epnum;
460 return 0;
463 static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe)
465 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
466 struct device *dev = usbhs_priv_to_dev(priv);
467 int pipe_num = usbhs_pipe_number(pipe);
468 u16 buff_size;
469 u16 bufnmb;
470 u16 bufnmb_cnt;
471 struct renesas_usbhs_driver_pipe_config *pipe_config =
472 usbhsp_get_pipe_config(priv, pipe_num);
475 * PIPEBUF
477 * see
478 * - "Register Descriptions" - "PIPEBUF" register
479 * - "Features" - "Pipe configuration"
480 * - "Operation" - "FIFO Buffer Memory"
481 * - "Operation" - "Pipe Control"
483 buff_size = pipe_config->bufsize;
484 bufnmb = pipe_config->bufnum;
486 /* change buff_size to register value */
487 bufnmb_cnt = (buff_size / 64) - 1;
489 dev_dbg(dev, "pipe : %d : buff_size 0x%x: bufnmb 0x%x\n",
490 pipe_num, buff_size, bufnmb);
492 return (0x1f & bufnmb_cnt) << 10 |
493 (0xff & bufnmb) << 0;
496 void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel,
497 u16 epnum, u16 maxp)
499 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
500 int pipe_num = usbhs_pipe_number(pipe);
501 struct renesas_usbhs_driver_pipe_config *pipe_config =
502 usbhsp_get_pipe_config(priv, pipe_num);
503 u16 dblb = pipe_config->double_buf ? DBLB : 0;
505 if (devsel > 0xA) {
506 struct device *dev = usbhs_priv_to_dev(priv);
508 dev_err(dev, "devsel error %d\n", devsel);
510 devsel = 0;
513 usbhsp_pipe_barrier(pipe);
515 pipe->maxp = maxp;
517 usbhsp_pipe_select(pipe);
518 usbhsp_pipe_maxp_set(pipe, 0xFFFF,
519 (devsel << 12) |
520 maxp);
522 if (!usbhs_pipe_is_dcp(pipe))
523 usbhsp_pipe_cfg_set(pipe, 0x000F | DBLB, epnum | dblb);
527 * pipe control
529 int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe)
532 * see
533 * usbhs_pipe_config_update()
534 * usbhs_dcp_malloc()
536 return pipe->maxp;
539 int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe)
541 return usbhsp_flags_has(pipe, IS_DIR_IN);
544 int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe)
546 return usbhsp_flags_has(pipe, IS_DIR_HOST);
549 int usbhs_pipe_is_running(struct usbhs_pipe *pipe)
551 return usbhsp_flags_has(pipe, IS_RUNNING);
554 void usbhs_pipe_running(struct usbhs_pipe *pipe, int running)
556 if (running)
557 usbhsp_flags_set(pipe, IS_RUNNING);
558 else
559 usbhsp_flags_clr(pipe, IS_RUNNING);
562 void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int sequence)
564 u16 mask = (SQCLR | SQSET);
565 u16 val;
568 * sequence
569 * 0 : data0
570 * 1 : data1
571 * -1 : no change
573 switch (sequence) {
574 case 0:
575 val = SQCLR;
576 break;
577 case 1:
578 val = SQSET;
579 break;
580 default:
581 return;
584 usbhsp_pipectrl_set(pipe, mask, val);
587 static int usbhs_pipe_get_data_sequence(struct usbhs_pipe *pipe)
589 return !!(usbhsp_pipectrl_get(pipe) & SQMON);
592 void usbhs_pipe_clear(struct usbhs_pipe *pipe)
594 if (usbhs_pipe_is_dcp(pipe)) {
595 usbhs_fifo_clear_dcp(pipe);
596 } else {
597 usbhsp_pipectrl_set(pipe, ACLRM, ACLRM);
598 usbhsp_pipectrl_set(pipe, ACLRM, 0);
602 void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable)
604 int sequence;
606 if (usbhs_pipe_is_dcp(pipe))
607 return;
609 usbhsp_pipe_select(pipe);
610 /* check if the driver needs to change the BFRE value */
611 if (!(enable ^ !!(usbhsp_pipe_cfg_get(pipe) & BFRE)))
612 return;
614 sequence = usbhs_pipe_get_data_sequence(pipe);
615 usbhsp_pipe_cfg_set(pipe, BFRE, enable ? BFRE : 0);
616 usbhs_pipe_clear(pipe);
617 usbhs_pipe_data_sequence(pipe, sequence);
620 static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type)
622 struct usbhs_pipe *pos, *pipe;
623 int i;
626 * find target pipe
628 pipe = NULL;
629 usbhs_for_each_pipe_with_dcp(pos, priv, i) {
630 if (!usbhs_pipe_type_is(pos, type))
631 continue;
632 if (usbhsp_flags_has(pos, IS_USED))
633 continue;
635 pipe = pos;
636 break;
639 if (!pipe)
640 return NULL;
643 * initialize pipe flags
645 usbhsp_flags_init(pipe);
646 usbhsp_flags_set(pipe, IS_USED);
648 return pipe;
651 static void usbhsp_put_pipe(struct usbhs_pipe *pipe)
653 usbhsp_flags_init(pipe);
656 void usbhs_pipe_init(struct usbhs_priv *priv,
657 int (*dma_map_ctrl)(struct device *dma_dev,
658 struct usbhs_pkt *pkt, int map))
660 struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
661 struct usbhs_pipe *pipe;
662 int i;
664 usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
665 usbhsp_flags_init(pipe);
666 pipe->fifo = NULL;
667 pipe->mod_private = NULL;
668 INIT_LIST_HEAD(&pipe->list);
670 /* pipe force init */
671 usbhs_pipe_clear(pipe);
674 info->dma_map_ctrl = dma_map_ctrl;
677 struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv,
678 int endpoint_type,
679 int dir_in)
681 struct device *dev = usbhs_priv_to_dev(priv);
682 struct usbhs_pipe *pipe;
683 int is_host = usbhs_mod_is_host(priv);
684 int ret;
685 u16 pipecfg, pipebuf;
687 pipe = usbhsp_get_pipe(priv, endpoint_type);
688 if (!pipe) {
689 dev_err(dev, "can't get pipe (%s)\n",
690 usbhsp_pipe_name[endpoint_type]);
691 return NULL;
694 INIT_LIST_HEAD(&pipe->list);
696 usbhs_pipe_disable(pipe);
698 /* make sure pipe is not busy */
699 ret = usbhsp_pipe_barrier(pipe);
700 if (ret < 0) {
701 dev_err(dev, "pipe setup failed %d\n", usbhs_pipe_number(pipe));
702 return NULL;
705 if (usbhsp_setup_pipecfg(pipe, is_host, dir_in, &pipecfg)) {
706 dev_err(dev, "can't setup pipe\n");
707 return NULL;
710 pipebuf = usbhsp_setup_pipebuff(pipe);
712 usbhsp_pipe_select(pipe);
713 usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg);
714 usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf);
715 usbhs_pipe_clear(pipe);
717 usbhs_pipe_sequence_data0(pipe);
719 dev_dbg(dev, "enable pipe %d : %s (%s)\n",
720 usbhs_pipe_number(pipe),
721 usbhs_pipe_name(pipe),
722 usbhs_pipe_is_dir_in(pipe) ? "in" : "out");
725 * epnum / maxp are still not set to this pipe.
726 * call usbhs_pipe_config_update() after this function !!
729 return pipe;
732 void usbhs_pipe_free(struct usbhs_pipe *pipe)
734 usbhsp_put_pipe(pipe);
737 void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo)
739 if (pipe->fifo)
740 pipe->fifo->pipe = NULL;
742 pipe->fifo = fifo;
744 if (fifo)
745 fifo->pipe = pipe;
750 * dcp control
752 struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv)
754 struct usbhs_pipe *pipe;
756 pipe = usbhsp_get_pipe(priv, USB_ENDPOINT_XFER_CONTROL);
757 if (!pipe)
758 return NULL;
760 INIT_LIST_HEAD(&pipe->list);
763 * call usbhs_pipe_config_update() after this function !!
766 return pipe;
769 void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe)
771 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
773 WARN_ON(!usbhs_pipe_is_dcp(pipe));
775 usbhs_pipe_enable(pipe);
777 if (!usbhs_mod_is_host(priv)) /* funconly */
778 usbhsp_pipectrl_set(pipe, CCPL, CCPL);
781 void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out)
783 usbhsp_pipe_cfg_set(pipe, DIR_OUT,
784 dir_out ? DIR_OUT : 0);
788 * pipe module function
790 int usbhs_pipe_probe(struct usbhs_priv *priv)
792 struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
793 struct usbhs_pipe *pipe;
794 struct device *dev = usbhs_priv_to_dev(priv);
795 struct renesas_usbhs_driver_pipe_config *pipe_configs =
796 usbhs_get_dparam(priv, pipe_configs);
797 int pipe_size = usbhs_get_dparam(priv, pipe_size);
798 int i;
800 /* This driver expects 1st pipe is DCP */
801 if (pipe_configs[0].type != USB_ENDPOINT_XFER_CONTROL) {
802 dev_err(dev, "1st PIPE is not DCP\n");
803 return -EINVAL;
806 info->pipe = kzalloc(sizeof(struct usbhs_pipe) * pipe_size, GFP_KERNEL);
807 if (!info->pipe)
808 return -ENOMEM;
810 info->size = pipe_size;
813 * init pipe
815 usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
816 pipe->priv = priv;
818 usbhs_pipe_type(pipe) =
819 pipe_configs[i].type & USB_ENDPOINT_XFERTYPE_MASK;
821 dev_dbg(dev, "pipe %x\t: %s\n",
822 i, usbhsp_pipe_name[pipe_configs[i].type]);
825 return 0;
828 void usbhs_pipe_remove(struct usbhs_priv *priv)
830 struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
832 kfree(info->pipe);