drivers/hwmon/sht3x.c

   1 /* Sensirion SHT3x-DIS humidity and temperature sensor driver.
   2  * The SHT3x comes in many different versions, this driver is for the
   3  * I2C version only.
   4  *
   5  * Copyright (C) 2016 Sensirion AG, Switzerland
   6  * Author: David Frey <david.frey@sensirion.com>
   7  * Author: Pascal Sachs <pascal.sachs@sensirion.com>
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  */
  20
  21 #include <asm/page.h>
  22 #include <linux/crc8.h>
  23 #include <linux/delay.h>
  24 #include <linux/err.h>
  25 #include <linux/hwmon.h>
  26 #include <linux/hwmon-sysfs.h>
  27 #include <linux/i2c.h>
  28 #include <linux/init.h>
  29 #include <linux/kernel.h>
  30 #include <linux/module.h>
  31 #include <linux/slab.h>
  32 #include <linux/jiffies.h>
  33 #include <linux/platform_data/sht3x.h>
  34
  35 /* commands (high precision mode) */
  36 static const unsigned char sht3x_cmd_measure_blocking_hpm[]    = { 0x2c, 0x06 };
  37 static const unsigned char sht3x_cmd_measure_nonblocking_hpm[] = { 0x24, 0x00 };
  38
  39 /* commands (low power mode) */
  40 static const unsigned char sht3x_cmd_measure_blocking_lpm[]    = { 0x2c, 0x10 };
  41 static const unsigned char sht3x_cmd_measure_nonblocking_lpm[] = { 0x24, 0x16 };
  42
  43 /* commands for periodic mode */
  44 static const unsigned char sht3x_cmd_measure_periodic_mode[]   = { 0xe0, 0x00 };
  45 static const unsigned char sht3x_cmd_break[]                   = { 0x30, 0x93 };
  46
  47 /* commands for heater control */
  48 static const unsigned char sht3x_cmd_heater_on[]               = { 0x30, 0x6d };
  49 static const unsigned char sht3x_cmd_heater_off[]              = { 0x30, 0x66 };
  50
  51 /* other commands */
  52 static const unsigned char sht3x_cmd_read_status_reg[]         = { 0xf3, 0x2d };
  53 static const unsigned char sht3x_cmd_clear_status_reg[]        = { 0x30, 0x41 };
  54
  55 /* delays for non-blocking i2c commands, both in us */
  56 #define SHT3X_NONBLOCKING_WAIT_TIME_HPM  15000
  57 #define SHT3X_NONBLOCKING_WAIT_TIME_LPM   4000
  58
  59 #define SHT3X_WORD_LEN         2
  60 #define SHT3X_CMD_LENGTH       2
  61 #define SHT3X_CRC8_LEN         1
  62 #define SHT3X_RESPONSE_LENGTH  6
  63 #define SHT3X_CRC8_POLYNOMIAL  0x31
  64 #define SHT3X_CRC8_INIT        0xFF
  65 #define SHT3X_MIN_TEMPERATURE  -45000
  66 #define SHT3X_MAX_TEMPERATURE  130000
  67 #define SHT3X_MIN_HUMIDITY     0
  68 #define SHT3X_MAX_HUMIDITY     100000
  69
  70 enum sht3x_chips {
  71         sht3x,
  72         sts3x,
  73 };
  74
  75 enum sht3x_limits {
  76         limit_max = 0,
  77         limit_max_hyst,
  78         limit_min,
  79         limit_min_hyst,
  80 };
  81
  82 DECLARE_CRC8_TABLE(sht3x_crc8_table);
  83
  84 /* periodic measure commands (high precision mode) */
  85 static const char periodic_measure_commands_hpm[][SHT3X_CMD_LENGTH] = {
  86         /* 0.5 measurements per second */
  87         {0x20, 0x32},
  88         /* 1 measurements per second */
  89         {0x21, 0x30},
  90         /* 2 measurements per second */
  91         {0x22, 0x36},
  92         /* 4 measurements per second */
  93         {0x23, 0x34},
  94         /* 10 measurements per second */
  95         {0x27, 0x37},
  96 };
  97
  98 /* periodic measure commands (low power mode) */
  99 static const char periodic_measure_commands_lpm[][SHT3X_CMD_LENGTH] = {
 100         /* 0.5 measurements per second */
 101         {0x20, 0x2f},
 102         /* 1 measurements per second */
 103         {0x21, 0x2d},
 104         /* 2 measurements per second */
 105         {0x22, 0x2b},
 106         /* 4 measurements per second */
 107         {0x23, 0x29},
 108         /* 10 measurements per second */
 109         {0x27, 0x2a},
 110 };
 111
 112 struct sht3x_limit_commands {
 113         const char read_command[SHT3X_CMD_LENGTH];
 114         const char write_command[SHT3X_CMD_LENGTH];
 115 };
 116
 117 static const struct sht3x_limit_commands limit_commands[] = {
 118         /* temp1_max, humidity1_max */
 119         [limit_max] = { {0xe1, 0x1f}, {0x61, 0x1d} },
 120         /* temp_1_max_hyst, humidity1_max_hyst */
 121         [limit_max_hyst] = { {0xe1, 0x14}, {0x61, 0x16} },
 122         /* temp1_min, humidity1_min */
 123         [limit_min] = { {0xe1, 0x02}, {0x61, 0x00} },
 124         /* temp_1_min_hyst, humidity1_min_hyst */
 125         [limit_min_hyst] = { {0xe1, 0x09}, {0x61, 0x0B} },
 126 };
 127
 128 #define SHT3X_NUM_LIMIT_CMD  ARRAY_SIZE(limit_commands)
 129
 130 static const u16 mode_to_update_interval[] = {
 131            0,
 132         2000,
 133         1000,
 134          500,
 135          250,
 136          100,
 137 };
 138
 139 struct sht3x_data {
 140         struct i2c_client *client;
 141         struct mutex i2c_lock; /* lock for sending i2c commands */
 142         struct mutex data_lock; /* lock for updating driver data */
 143
 144         u8 mode;
 145         const unsigned char *command;
 146         u32 wait_time;                  /* in us*/
 147         unsigned long last_update;      /* last update in periodic mode*/
 148
 149         struct sht3x_platform_data setup;
 150
 151         /*
 152          * cached values for temperature and humidity and limits
 153          * the limits arrays have the following order:
 154          * max, max_hyst, min, min_hyst
 155          */
 156         int temperature;
 157         int temperature_limits[SHT3X_NUM_LIMIT_CMD];
 158         u32 humidity;
 159         u32 humidity_limits[SHT3X_NUM_LIMIT_CMD];
 160 };
 161
 162 static u8 get_mode_from_update_interval(u16 value)
 163 {
 164         size_t index;
 165         u8 number_of_modes = ARRAY_SIZE(mode_to_update_interval);
 166
 167         if (value == 0)
 168                 return 0;
 169
 170         /* find next faster update interval */
 171         for (index = 1; index < number_of_modes; index++) {
 172                 if (mode_to_update_interval[index] <= value)
 173                         return index;
 174         }
 175
 176         return number_of_modes - 1;
 177 }
 178
 179 static int sht3x_read_from_command(struct i2c_client *client,
 180                                    struct sht3x_data *data,
 181                                    const char *command,
 182                                    char *buf, int length, u32 wait_time)
 183 {
 184         int ret;
 185
 186         mutex_lock(&data->i2c_lock);
 187         ret = i2c_master_send(client, command, SHT3X_CMD_LENGTH);
 188
 189         if (ret != SHT3X_CMD_LENGTH) {
 190                 ret = ret < 0 ? ret : -EIO;
 191                 goto out;
 192         }
 193
 194         if (wait_time)
 195                 usleep_range(wait_time, wait_time + 1000);
 196
 197         ret = i2c_master_recv(client, buf, length);
 198         if (ret != length) {
 199                 ret = ret < 0 ? ret : -EIO;
 200                 goto out;
 201         }
 202
 203         ret = 0;
 204 out:
 205         mutex_unlock(&data->i2c_lock);
 206         return ret;
 207 }
 208
 209 static int sht3x_extract_temperature(u16 raw)
 210 {
 211         /*
 212          * From datasheet:
 213          * T = -45 + 175 * ST / 2^16
 214          * Adapted for integer fixed point (3 digit) arithmetic.
 215          */
 216         return ((21875 * (int)raw) >> 13) - 45000;
 217 }
 218
 219 static u32 sht3x_extract_humidity(u16 raw)
 220 {
 221         /*
 222          * From datasheet:
 223          * RH = 100 * SRH / 2^16
 224          * Adapted for integer fixed point (3 digit) arithmetic.
 225          */
 226         return (12500 * (u32)raw) >> 13;
 227 }
 228
 229 static struct sht3x_data *sht3x_update_client(struct device *dev)
 230 {
 231         struct sht3x_data *data = dev_get_drvdata(dev);
 232         struct i2c_client *client = data->client;
 233         u16 interval_ms = mode_to_update_interval[data->mode];
 234         unsigned long interval_jiffies = msecs_to_jiffies(interval_ms);
 235         unsigned char buf[SHT3X_RESPONSE_LENGTH];
 236         u16 val;
 237         int ret = 0;
 238
 239         mutex_lock(&data->data_lock);
 240         /*
 241          * Only update cached readings once per update interval in periodic
 242          * mode. In single shot mode the sensor measures values on demand, so
 243          * every time the sysfs interface is called, a measurement is triggered.
 244          * In periodic mode however, the measurement process is handled
 245          * internally by the sensor and reading out sensor values only makes
 246          * sense if a new reading is available.
 247          */
 248         if (time_after(jiffies, data->last_update + interval_jiffies)) {
 249                 ret = sht3x_read_from_command(client, data, data->command, buf,
 250                                               sizeof(buf), data->wait_time);
 251                 if (ret)
 252                         goto out;
 253
 254                 val = be16_to_cpup((__be16 *)buf);
 255                 data->temperature = sht3x_extract_temperature(val);
 256                 val = be16_to_cpup((__be16 *)(buf + 3));
 257                 data->humidity = sht3x_extract_humidity(val);
 258                 data->last_update = jiffies;
 259         }
 260
 261 out:
 262         mutex_unlock(&data->data_lock);
 263         if (ret)
 264                 return ERR_PTR(ret);
 265
 266         return data;
 267 }
 268
 269 /* sysfs attributes */
 270 static ssize_t temp1_input_show(struct device *dev,
 271                                 struct device_attribute *attr, char *buf)
 272 {
 273         struct sht3x_data *data = sht3x_update_client(dev);
 274
 275         if (IS_ERR(data))
 276                 return PTR_ERR(data);
 277
 278         return sprintf(buf, "%d\n", data->temperature);
 279 }
 280
 281 static ssize_t humidity1_input_show(struct device *dev,
 282                                     struct device_attribute *attr, char *buf)
 283 {
 284         struct sht3x_data *data = sht3x_update_client(dev);
 285
 286         if (IS_ERR(data))
 287                 return PTR_ERR(data);
 288
 289         return sprintf(buf, "%u\n", data->humidity);
 290 }
 291
 292 /*
 293  * limits_update must only be called from probe or with data_lock held
 294  */
 295 static int limits_update(struct sht3x_data *data)
 296 {
 297         int ret;
 298         u8 index;
 299         int temperature;
 300         u32 humidity;
 301         u16 raw;
 302         char buffer[SHT3X_RESPONSE_LENGTH];
 303         const struct sht3x_limit_commands *commands;
 304         struct i2c_client *client = data->client;
 305
 306         for (index = 0; index < SHT3X_NUM_LIMIT_CMD; index++) {
 307                 commands = &limit_commands[index];
 308                 ret = sht3x_read_from_command(client, data,
 309                                               commands->read_command, buffer,
 310                                               SHT3X_RESPONSE_LENGTH, 0);
 311
 312                 if (ret)
 313                         return ret;
 314
 315                 raw = be16_to_cpup((__be16 *)buffer);
 316                 temperature = sht3x_extract_temperature((raw & 0x01ff) << 7);
 317                 humidity = sht3x_extract_humidity(raw & 0xfe00);
 318                 data->temperature_limits[index] = temperature;
 319                 data->humidity_limits[index] = humidity;
 320         }
 321
 322         return ret;
 323 }
 324
 325 static ssize_t temp1_limit_show(struct device *dev,
 326                                 struct device_attribute *attr,
 327                                 char *buf)
 328 {
 329         struct sht3x_data *data = dev_get_drvdata(dev);
 330         u8 index = to_sensor_dev_attr(attr)->index;
 331         int temperature_limit = data->temperature_limits[index];
 332
 333         return scnprintf(buf, PAGE_SIZE, "%d\n", temperature_limit);
 334 }
 335
 336 static ssize_t humidity1_limit_show(struct device *dev,
 337                                     struct device_attribute *attr,
 338                                     char *buf)
 339 {
 340         struct sht3x_data *data = dev_get_drvdata(dev);
 341         u8 index = to_sensor_dev_attr(attr)->index;
 342         u32 humidity_limit = data->humidity_limits[index];
 343
 344         return scnprintf(buf, PAGE_SIZE, "%u\n", humidity_limit);
 345 }
 346
 347 /*
 348  * limit_store must only be called with data_lock held
 349  */
 350 static size_t limit_store(struct device *dev,
 351                           size_t count,
 352                           u8 index,
 353                           int temperature,
 354                           u32 humidity)
 355 {
 356         char buffer[SHT3X_CMD_LENGTH + SHT3X_WORD_LEN + SHT3X_CRC8_LEN];
 357         char *position = buffer;
 358         int ret;
 359         u16 raw;
 360         struct sht3x_data *data = dev_get_drvdata(dev);
 361         struct i2c_client *client = data->client;
 362         const struct sht3x_limit_commands *commands;
 363
 364         commands = &limit_commands[index];
 365
 366         memcpy(position, commands->write_command, SHT3X_CMD_LENGTH);
 367         position += SHT3X_CMD_LENGTH;
 368         /*
 369          * ST = (T + 45) / 175 * 2^16
 370          * SRH = RH / 100 * 2^16
 371          * adapted for fixed point arithmetic and packed the same as
 372          * in limit_show()
 373          */
 374         raw = ((u32)(temperature + 45000) * 24543) >> (16 + 7);
 375         raw |= ((humidity * 42950) >> 16) & 0xfe00;
 376
 377         *((__be16 *)position) = cpu_to_be16(raw);
 378         position += SHT3X_WORD_LEN;
 379         *position = crc8(sht3x_crc8_table,
 380                          position - SHT3X_WORD_LEN,
 381                          SHT3X_WORD_LEN,
 382                          SHT3X_CRC8_INIT);
 383
 384         mutex_lock(&data->i2c_lock);
 385         ret = i2c_master_send(client, buffer, sizeof(buffer));
 386         mutex_unlock(&data->i2c_lock);
 387
 388         if (ret != sizeof(buffer))
 389                 return ret < 0 ? ret : -EIO;
 390
 391         data->temperature_limits[index] = temperature;
 392         data->humidity_limits[index] = humidity;
 393         return count;
 394 }
 395
 396 static ssize_t temp1_limit_store(struct device *dev,
 397                                  struct device_attribute *attr,
 398                                  const char *buf,
 399                                  size_t count)
 400 {
 401         int temperature;
 402         int ret;
 403         struct sht3x_data *data = dev_get_drvdata(dev);
 404         u8 index = to_sensor_dev_attr(attr)->index;
 405
 406         ret = kstrtoint(buf, 0, &temperature);
 407         if (ret)
 408                 return ret;
 409
 410         temperature = clamp_val(temperature, SHT3X_MIN_TEMPERATURE,
 411                                 SHT3X_MAX_TEMPERATURE);
 412         mutex_lock(&data->data_lock);
 413         ret = limit_store(dev, count, index, temperature,
 414                           data->humidity_limits[index]);
 415         mutex_unlock(&data->data_lock);
 416
 417         return ret;
 418 }
 419
 420 static ssize_t humidity1_limit_store(struct device *dev,
 421                                      struct device_attribute *attr,
 422                                      const char *buf,
 423                                      size_t count)
 424 {
 425         u32 humidity;
 426         int ret;
 427         struct sht3x_data *data = dev_get_drvdata(dev);
 428         u8 index = to_sensor_dev_attr(attr)->index;
 429
 430         ret = kstrtou32(buf, 0, &humidity);
 431         if (ret)
 432                 return ret;
 433
 434         humidity = clamp_val(humidity, SHT3X_MIN_HUMIDITY, SHT3X_MAX_HUMIDITY);
 435         mutex_lock(&data->data_lock);
 436         ret = limit_store(dev, count, index, data->temperature_limits[index],
 437                           humidity);
 438         mutex_unlock(&data->data_lock);
 439
 440         return ret;
 441 }
 442
 443 static void sht3x_select_command(struct sht3x_data *data)
 444 {
 445         /*
 446          * In blocking mode (clock stretching mode) the I2C bus
 447          * is blocked for other traffic, thus the call to i2c_master_recv()
 448          * will wait until the data is ready. For non blocking mode, we
 449          * have to wait ourselves.
 450          */
 451         if (data->mode > 0) {
 452                 data->command = sht3x_cmd_measure_periodic_mode;
 453                 data->wait_time = 0;
 454         } else if (data->setup.blocking_io) {
 455                 data->command = data->setup.high_precision ?
 456                                 sht3x_cmd_measure_blocking_hpm :
 457                                 sht3x_cmd_measure_blocking_lpm;
 458                 data->wait_time = 0;
 459         } else {
 460                 if (data->setup.high_precision) {
 461                         data->command = sht3x_cmd_measure_nonblocking_hpm;
 462                         data->wait_time = SHT3X_NONBLOCKING_WAIT_TIME_HPM;
 463                 } else {
 464                         data->command = sht3x_cmd_measure_nonblocking_lpm;
 465                         data->wait_time = SHT3X_NONBLOCKING_WAIT_TIME_LPM;
 466                 }
 467         }
 468 }
 469
 470 static int status_register_read(struct device *dev,
 471                                 struct device_attribute *attr,
 472                                 char *buffer, int length)
 473 {
 474         int ret;
 475         struct sht3x_data *data = dev_get_drvdata(dev);
 476         struct i2c_client *client = data->client;
 477
 478         ret = sht3x_read_from_command(client, data, sht3x_cmd_read_status_reg,
 479                                       buffer, length, 0);
 480
 481         return ret;
 482 }
 483
 484 static ssize_t temp1_alarm_show(struct device *dev,
 485                                 struct device_attribute *attr,
 486                                 char *buf)
 487 {
 488         char buffer[SHT3X_WORD_LEN + SHT3X_CRC8_LEN];
 489         int ret;
 490
 491         ret = status_register_read(dev, attr, buffer,
 492                                    SHT3X_WORD_LEN + SHT3X_CRC8_LEN);
 493         if (ret)
 494                 return ret;
 495
 496         return scnprintf(buf, PAGE_SIZE, "%d\n", !!(buffer[0] & 0x04));
 497 }
 498
 499 static ssize_t humidity1_alarm_show(struct device *dev,
 500                                     struct device_attribute *attr,
 501                                     char *buf)
 502 {
 503         char buffer[SHT3X_WORD_LEN + SHT3X_CRC8_LEN];
 504         int ret;
 505
 506         ret = status_register_read(dev, attr, buffer,
 507                                    SHT3X_WORD_LEN + SHT3X_CRC8_LEN);
 508         if (ret)
 509                 return ret;
 510
 511         return scnprintf(buf, PAGE_SIZE, "%d\n", !!(buffer[0] & 0x08));
 512 }
 513
 514 static ssize_t heater_enable_show(struct device *dev,
 515                                   struct device_attribute *attr,
 516                                   char *buf)
 517 {
 518         char buffer[SHT3X_WORD_LEN + SHT3X_CRC8_LEN];
 519         int ret;
 520
 521         ret = status_register_read(dev, attr, buffer,
 522                                    SHT3X_WORD_LEN + SHT3X_CRC8_LEN);
 523         if (ret)
 524                 return ret;
 525
 526         return scnprintf(buf, PAGE_SIZE, "%d\n", !!(buffer[0] & 0x20));
 527 }
 528
 529 static ssize_t heater_enable_store(struct device *dev,
 530                                    struct device_attribute *attr,
 531                                    const char *buf,
 532                                    size_t count)
 533 {
 534         struct sht3x_data *data = dev_get_drvdata(dev);
 535         struct i2c_client *client = data->client;
 536         int ret;
 537         bool status;
 538
 539         ret = kstrtobool(buf, &status);
 540         if (ret)
 541                 return ret;
 542
 543         mutex_lock(&data->i2c_lock);
 544
 545         if (status)
 546                 ret = i2c_master_send(client, (char *)&sht3x_cmd_heater_on,
 547                                       SHT3X_CMD_LENGTH);
 548         else
 549                 ret = i2c_master_send(client, (char *)&sht3x_cmd_heater_off,
 550                                       SHT3X_CMD_LENGTH);
 551
 552         mutex_unlock(&data->i2c_lock);
 553
 554         return ret;
 555 }
 556
 557 static ssize_t update_interval_show(struct device *dev,
 558                                     struct device_attribute *attr,
 559                                     char *buf)
 560 {
 561         struct sht3x_data *data = dev_get_drvdata(dev);
 562
 563         return scnprintf(buf, PAGE_SIZE, "%u\n",
 564                          mode_to_update_interval[data->mode]);
 565 }
 566
 567 static ssize_t update_interval_store(struct device *dev,
 568                                      struct device_attribute *attr,
 569                                      const char *buf,
 570                                      size_t count)
 571 {
 572         u16 update_interval;
 573         u8 mode;
 574         int ret;
 575         const char *command;
 576         struct sht3x_data *data = dev_get_drvdata(dev);
 577         struct i2c_client *client = data->client;
 578
 579         ret = kstrtou16(buf, 0, &update_interval);
 580         if (ret)
 581                 return ret;
 582
 583         mode = get_mode_from_update_interval(update_interval);
 584
 585         mutex_lock(&data->data_lock);
 586         /* mode did not change */
 587         if (mode == data->mode) {
 588                 mutex_unlock(&data->data_lock);
 589                 return count;
 590         }
 591
 592         mutex_lock(&data->i2c_lock);
 593         /*
 594          * Abort periodic measure mode.
 595          * To do any changes to the configuration while in periodic mode, we
 596          * have to send a break command to the sensor, which then falls back
 597          * to single shot (mode = 0).
 598          */
 599         if (data->mode > 0) {
 600                 ret = i2c_master_send(client, sht3x_cmd_break,
 601                                       SHT3X_CMD_LENGTH);
 602                 if (ret != SHT3X_CMD_LENGTH)
 603                         goto out;
 604                 data->mode = 0;
 605         }
 606
 607         if (mode > 0) {
 608                 if (data->setup.high_precision)
 609                         command = periodic_measure_commands_hpm[mode - 1];
 610                 else
 611                         command = periodic_measure_commands_lpm[mode - 1];
 612
 613                 /* select mode */
 614                 ret = i2c_master_send(client, command, SHT3X_CMD_LENGTH);
 615                 if (ret != SHT3X_CMD_LENGTH)
 616                         goto out;
 617         }
 618
 619         /* select mode and command */
 620         data->mode = mode;
 621         sht3x_select_command(data);
 622
 623 out:
 624         mutex_unlock(&data->i2c_lock);
 625         mutex_unlock(&data->data_lock);
 626         if (ret != SHT3X_CMD_LENGTH)
 627                 return ret < 0 ? ret : -EIO;
 628
 629         return count;
 630 }
 631
 632 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, temp1_input_show, NULL, 0);
 633 static SENSOR_DEVICE_ATTR(humidity1_input, S_IRUGO, humidity1_input_show,
 634                           NULL, 0);
 635 static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
 636                           temp1_limit_show, temp1_limit_store,
 637                           limit_max);
 638 static SENSOR_DEVICE_ATTR(humidity1_max, S_IRUGO | S_IWUSR,
 639                           humidity1_limit_show, humidity1_limit_store,
 640                           limit_max);
 641 static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
 642                           temp1_limit_show, temp1_limit_store,
 643                           limit_max_hyst);
 644 static SENSOR_DEVICE_ATTR(humidity1_max_hyst, S_IRUGO | S_IWUSR,
 645                           humidity1_limit_show, humidity1_limit_store,
 646                           limit_max_hyst);
 647 static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR,
 648                           temp1_limit_show, temp1_limit_store,
 649                           limit_min);
 650 static SENSOR_DEVICE_ATTR(humidity1_min, S_IRUGO | S_IWUSR,
 651                           humidity1_limit_show, humidity1_limit_store,
 652                           limit_min);
 653 static SENSOR_DEVICE_ATTR(temp1_min_hyst, S_IRUGO | S_IWUSR,
 654                           temp1_limit_show, temp1_limit_store,
 655                           limit_min_hyst);
 656 static SENSOR_DEVICE_ATTR(humidity1_min_hyst, S_IRUGO | S_IWUSR,
 657                           humidity1_limit_show, humidity1_limit_store,
 658                           limit_min_hyst);
 659 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, temp1_alarm_show, NULL, 0);
 660 static SENSOR_DEVICE_ATTR(humidity1_alarm, S_IRUGO, humidity1_alarm_show,
 661                           NULL, 0);
 662 static SENSOR_DEVICE_ATTR(heater_enable, S_IRUGO | S_IWUSR,
 663                           heater_enable_show, heater_enable_store, 0);
 664 static SENSOR_DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR,
 665                           update_interval_show, update_interval_store, 0);
 666
 667 static struct attribute *sht3x_attrs[] = {
 668         &sensor_dev_attr_temp1_input.dev_attr.attr,
 669         &sensor_dev_attr_humidity1_input.dev_attr.attr,
 670         &sensor_dev_attr_temp1_max.dev_attr.attr,
 671         &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
 672         &sensor_dev_attr_humidity1_max.dev_attr.attr,
 673         &sensor_dev_attr_humidity1_max_hyst.dev_attr.attr,
 674         &sensor_dev_attr_temp1_min.dev_attr.attr,
 675         &sensor_dev_attr_temp1_min_hyst.dev_attr.attr,
 676         &sensor_dev_attr_humidity1_min.dev_attr.attr,
 677         &sensor_dev_attr_humidity1_min_hyst.dev_attr.attr,
 678         &sensor_dev_attr_temp1_alarm.dev_attr.attr,
 679         &sensor_dev_attr_humidity1_alarm.dev_attr.attr,
 680         &sensor_dev_attr_heater_enable.dev_attr.attr,
 681         &sensor_dev_attr_update_interval.dev_attr.attr,
 682         NULL
 683 };
 684
 685 static struct attribute *sts3x_attrs[] = {
 686         &sensor_dev_attr_temp1_input.dev_attr.attr,
 687         NULL
 688 };
 689
 690 ATTRIBUTE_GROUPS(sht3x);
 691 ATTRIBUTE_GROUPS(sts3x);
 692
 693 static int sht3x_probe(struct i2c_client *client,
 694                        const struct i2c_device_id *id)
 695 {
 696         int ret;
 697         struct sht3x_data *data;
 698         struct device *hwmon_dev;
 699         struct i2c_adapter *adap = client->adapter;
 700         struct device *dev = &client->dev;
 701         const struct attribute_group **attribute_groups;
 702
 703         /*
 704          * we require full i2c support since the sht3x uses multi-byte read and
 705          * writes as well as multi-byte commands which are not supported by
 706          * the smbus protocol
 707          */
 708         if (!i2c_check_functionality(adap, I2C_FUNC_I2C))
 709                 return -ENODEV;
 710
 711         ret = i2c_master_send(client, sht3x_cmd_clear_status_reg,
 712                               SHT3X_CMD_LENGTH);
 713         if (ret != SHT3X_CMD_LENGTH)
 714                 return ret < 0 ? ret : -ENODEV;
 715
 716         data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 717         if (!data)
 718                 return -ENOMEM;
 719
 720         data->setup.blocking_io = false;
 721         data->setup.high_precision = true;
 722         data->mode = 0;
 723         data->last_update = jiffies - msecs_to_jiffies(3000);
 724         data->client = client;
 725         crc8_populate_msb(sht3x_crc8_table, SHT3X_CRC8_POLYNOMIAL);
 726
 727         if (client->dev.platform_data)
 728                 data->setup = *(struct sht3x_platform_data *)dev->platform_data;
 729
 730         sht3x_select_command(data);
 731
 732         mutex_init(&data->i2c_lock);
 733         mutex_init(&data->data_lock);
 734
 735         ret = limits_update(data);
 736         if (ret)
 737                 return ret;
 738
 739         if (id->driver_data == sts3x)
 740                 attribute_groups = sts3x_groups;
 741         else
 742                 attribute_groups = sht3x_groups;
 743
 744         hwmon_dev = devm_hwmon_device_register_with_groups(dev,
 745                                                            client->name,
 746                                                            data,
 747                                                            attribute_groups);
 748
 749         if (IS_ERR(hwmon_dev))
 750                 dev_dbg(dev, "unable to register hwmon device\n");
 751
 752         return PTR_ERR_OR_ZERO(hwmon_dev);
 753 }
 754
 755 /* device ID table */
 756 static const struct i2c_device_id sht3x_ids[] = {
 757         {"sht3x", sht3x},
 758         {"sts3x", sts3x},
 759         {}
 760 };
 761
 762 MODULE_DEVICE_TABLE(i2c, sht3x_ids);
 763
 764 static struct i2c_driver sht3x_i2c_driver = {
 765         .driver.name = "sht3x",
 766         .probe       = sht3x_probe,
 767         .id_table    = sht3x_ids,
 768 };
 769
 770 module_i2c_driver(sht3x_i2c_driver);
 771
 772 MODULE_AUTHOR("David Frey <david.frey@sensirion.com>");
 773 MODULE_AUTHOR("Pascal Sachs <pascal.sachs@sensirion.com>");
 774 MODULE_DESCRIPTION("Sensirion SHT3x humidity and temperature sensor driver");
 775 MODULE_LICENSE("GPL");