Merge tag 'io_uring-5.11-2021-01-16' of git://git.kernel.dk/linux-block
[linux/fpc-iii.git] / drivers / gpu / drm / exynos / exynos_drm_g2d.c
blob967a5cdc120e33d83a751177207ef2732f81c444
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2012 Samsung Electronics Co.Ltd
4 * Authors: Joonyoung Shim <jy0922.shim@samsung.com>
5 */
7 #include <linux/clk.h>
8 #include <linux/component.h>
9 #include <linux/delay.h>
10 #include <linux/dma-mapping.h>
11 #include <linux/err.h>
12 #include <linux/interrupt.h>
13 #include <linux/io.h>
14 #include <linux/kernel.h>
15 #include <linux/of.h>
16 #include <linux/platform_device.h>
17 #include <linux/pm_runtime.h>
18 #include <linux/slab.h>
19 #include <linux/uaccess.h>
20 #include <linux/workqueue.h>
22 #include <drm/drm_file.h>
23 #include <drm/exynos_drm.h>
25 #include "exynos_drm_drv.h"
26 #include "exynos_drm_g2d.h"
27 #include "exynos_drm_gem.h"
29 #define G2D_HW_MAJOR_VER 4
30 #define G2D_HW_MINOR_VER 1
32 /* vaild register range set from user: 0x0104 ~ 0x0880 */
33 #define G2D_VALID_START 0x0104
34 #define G2D_VALID_END 0x0880
36 /* general registers */
37 #define G2D_SOFT_RESET 0x0000
38 #define G2D_INTEN 0x0004
39 #define G2D_INTC_PEND 0x000C
40 #define G2D_DMA_SFR_BASE_ADDR 0x0080
41 #define G2D_DMA_COMMAND 0x0084
42 #define G2D_DMA_STATUS 0x008C
43 #define G2D_DMA_HOLD_CMD 0x0090
45 /* command registers */
46 #define G2D_BITBLT_START 0x0100
48 /* registers for base address */
49 #define G2D_SRC_BASE_ADDR 0x0304
50 #define G2D_SRC_STRIDE 0x0308
51 #define G2D_SRC_COLOR_MODE 0x030C
52 #define G2D_SRC_LEFT_TOP 0x0310
53 #define G2D_SRC_RIGHT_BOTTOM 0x0314
54 #define G2D_SRC_PLANE2_BASE_ADDR 0x0318
55 #define G2D_DST_BASE_ADDR 0x0404
56 #define G2D_DST_STRIDE 0x0408
57 #define G2D_DST_COLOR_MODE 0x040C
58 #define G2D_DST_LEFT_TOP 0x0410
59 #define G2D_DST_RIGHT_BOTTOM 0x0414
60 #define G2D_DST_PLANE2_BASE_ADDR 0x0418
61 #define G2D_PAT_BASE_ADDR 0x0500
62 #define G2D_MSK_BASE_ADDR 0x0520
64 /* G2D_SOFT_RESET */
65 #define G2D_SFRCLEAR (1 << 1)
66 #define G2D_R (1 << 0)
68 /* G2D_INTEN */
69 #define G2D_INTEN_ACF (1 << 3)
70 #define G2D_INTEN_UCF (1 << 2)
71 #define G2D_INTEN_GCF (1 << 1)
72 #define G2D_INTEN_SCF (1 << 0)
74 /* G2D_INTC_PEND */
75 #define G2D_INTP_ACMD_FIN (1 << 3)
76 #define G2D_INTP_UCMD_FIN (1 << 2)
77 #define G2D_INTP_GCMD_FIN (1 << 1)
78 #define G2D_INTP_SCMD_FIN (1 << 0)
80 /* G2D_DMA_COMMAND */
81 #define G2D_DMA_HALT (1 << 2)
82 #define G2D_DMA_CONTINUE (1 << 1)
83 #define G2D_DMA_START (1 << 0)
85 /* G2D_DMA_STATUS */
86 #define G2D_DMA_LIST_DONE_COUNT (0xFF << 17)
87 #define G2D_DMA_BITBLT_DONE_COUNT (0xFFFF << 1)
88 #define G2D_DMA_DONE (1 << 0)
89 #define G2D_DMA_LIST_DONE_COUNT_OFFSET 17
91 /* G2D_DMA_HOLD_CMD */
92 #define G2D_USER_HOLD (1 << 2)
93 #define G2D_LIST_HOLD (1 << 1)
94 #define G2D_BITBLT_HOLD (1 << 0)
96 /* G2D_BITBLT_START */
97 #define G2D_START_CASESEL (1 << 2)
98 #define G2D_START_NHOLT (1 << 1)
99 #define G2D_START_BITBLT (1 << 0)
101 /* buffer color format */
102 #define G2D_FMT_XRGB8888 0
103 #define G2D_FMT_ARGB8888 1
104 #define G2D_FMT_RGB565 2
105 #define G2D_FMT_XRGB1555 3
106 #define G2D_FMT_ARGB1555 4
107 #define G2D_FMT_XRGB4444 5
108 #define G2D_FMT_ARGB4444 6
109 #define G2D_FMT_PACKED_RGB888 7
110 #define G2D_FMT_A8 11
111 #define G2D_FMT_L8 12
113 /* buffer valid length */
114 #define G2D_LEN_MIN 1
115 #define G2D_LEN_MAX 8000
117 #define G2D_CMDLIST_SIZE (PAGE_SIZE / 4)
118 #define G2D_CMDLIST_NUM 64
119 #define G2D_CMDLIST_POOL_SIZE (G2D_CMDLIST_SIZE * G2D_CMDLIST_NUM)
120 #define G2D_CMDLIST_DATA_NUM (G2D_CMDLIST_SIZE / sizeof(u32) - 2)
122 /* maximum buffer pool size of userptr is 64MB as default */
123 #define MAX_POOL (64 * 1024 * 1024)
125 enum {
126 BUF_TYPE_GEM = 1,
127 BUF_TYPE_USERPTR,
130 enum g2d_reg_type {
131 REG_TYPE_NONE = -1,
132 REG_TYPE_SRC,
133 REG_TYPE_SRC_PLANE2,
134 REG_TYPE_DST,
135 REG_TYPE_DST_PLANE2,
136 REG_TYPE_PAT,
137 REG_TYPE_MSK,
138 MAX_REG_TYPE_NR
141 enum g2d_flag_bits {
143 * If set, suspends the runqueue worker after the currently
144 * processed node is finished.
146 G2D_BIT_SUSPEND_RUNQUEUE,
148 * If set, indicates that the engine is currently busy.
150 G2D_BIT_ENGINE_BUSY,
153 /* cmdlist data structure */
154 struct g2d_cmdlist {
155 u32 head;
156 unsigned long data[G2D_CMDLIST_DATA_NUM];
157 u32 last; /* last data offset */
161 * A structure of buffer description
163 * @format: color format
164 * @stride: buffer stride/pitch in bytes
165 * @left_x: the x coordinates of left top corner
166 * @top_y: the y coordinates of left top corner
167 * @right_x: the x coordinates of right bottom corner
168 * @bottom_y: the y coordinates of right bottom corner
171 struct g2d_buf_desc {
172 unsigned int format;
173 unsigned int stride;
174 unsigned int left_x;
175 unsigned int top_y;
176 unsigned int right_x;
177 unsigned int bottom_y;
181 * A structure of buffer information
183 * @map_nr: manages the number of mapped buffers
184 * @reg_types: stores regitster type in the order of requested command
185 * @handles: stores buffer handle in its reg_type position
186 * @types: stores buffer type in its reg_type position
187 * @descs: stores buffer description in its reg_type position
190 struct g2d_buf_info {
191 unsigned int map_nr;
192 enum g2d_reg_type reg_types[MAX_REG_TYPE_NR];
193 void *obj[MAX_REG_TYPE_NR];
194 unsigned int types[MAX_REG_TYPE_NR];
195 struct g2d_buf_desc descs[MAX_REG_TYPE_NR];
198 struct drm_exynos_pending_g2d_event {
199 struct drm_pending_event base;
200 struct drm_exynos_g2d_event event;
203 struct g2d_cmdlist_userptr {
204 struct list_head list;
205 dma_addr_t dma_addr;
206 unsigned long userptr;
207 unsigned long size;
208 struct frame_vector *vec;
209 struct sg_table *sgt;
210 atomic_t refcount;
211 bool in_pool;
212 bool out_of_list;
214 struct g2d_cmdlist_node {
215 struct list_head list;
216 struct g2d_cmdlist *cmdlist;
217 dma_addr_t dma_addr;
218 struct g2d_buf_info buf_info;
220 struct drm_exynos_pending_g2d_event *event;
223 struct g2d_runqueue_node {
224 struct list_head list;
225 struct list_head run_cmdlist;
226 struct list_head event_list;
227 struct drm_file *filp;
228 pid_t pid;
229 struct completion complete;
230 int async;
233 struct g2d_data {
234 struct device *dev;
235 void *dma_priv;
236 struct clk *gate_clk;
237 void __iomem *regs;
238 int irq;
239 struct workqueue_struct *g2d_workq;
240 struct work_struct runqueue_work;
241 struct drm_device *drm_dev;
242 unsigned long flags;
244 /* cmdlist */
245 struct g2d_cmdlist_node *cmdlist_node;
246 struct list_head free_cmdlist;
247 struct mutex cmdlist_mutex;
248 dma_addr_t cmdlist_pool;
249 void *cmdlist_pool_virt;
250 unsigned long cmdlist_dma_attrs;
252 /* runqueue*/
253 struct g2d_runqueue_node *runqueue_node;
254 struct list_head runqueue;
255 struct mutex runqueue_mutex;
256 struct kmem_cache *runqueue_slab;
258 unsigned long current_pool;
259 unsigned long max_pool;
262 static inline void g2d_hw_reset(struct g2d_data *g2d)
264 writel(G2D_R | G2D_SFRCLEAR, g2d->regs + G2D_SOFT_RESET);
265 clear_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags);
268 static int g2d_init_cmdlist(struct g2d_data *g2d)
270 struct device *dev = g2d->dev;
271 struct g2d_cmdlist_node *node;
272 int nr;
273 int ret;
274 struct g2d_buf_info *buf_info;
276 g2d->cmdlist_dma_attrs = DMA_ATTR_WRITE_COMBINE;
278 g2d->cmdlist_pool_virt = dma_alloc_attrs(to_dma_dev(g2d->drm_dev),
279 G2D_CMDLIST_POOL_SIZE,
280 &g2d->cmdlist_pool, GFP_KERNEL,
281 g2d->cmdlist_dma_attrs);
282 if (!g2d->cmdlist_pool_virt) {
283 dev_err(dev, "failed to allocate dma memory\n");
284 return -ENOMEM;
287 node = kcalloc(G2D_CMDLIST_NUM, sizeof(*node), GFP_KERNEL);
288 if (!node) {
289 ret = -ENOMEM;
290 goto err;
293 for (nr = 0; nr < G2D_CMDLIST_NUM; nr++) {
294 unsigned int i;
296 node[nr].cmdlist =
297 g2d->cmdlist_pool_virt + nr * G2D_CMDLIST_SIZE;
298 node[nr].dma_addr =
299 g2d->cmdlist_pool + nr * G2D_CMDLIST_SIZE;
301 buf_info = &node[nr].buf_info;
302 for (i = 0; i < MAX_REG_TYPE_NR; i++)
303 buf_info->reg_types[i] = REG_TYPE_NONE;
305 list_add_tail(&node[nr].list, &g2d->free_cmdlist);
308 return 0;
310 err:
311 dma_free_attrs(to_dma_dev(g2d->drm_dev), G2D_CMDLIST_POOL_SIZE,
312 g2d->cmdlist_pool_virt,
313 g2d->cmdlist_pool, g2d->cmdlist_dma_attrs);
314 return ret;
317 static void g2d_fini_cmdlist(struct g2d_data *g2d)
319 kfree(g2d->cmdlist_node);
321 if (g2d->cmdlist_pool_virt && g2d->cmdlist_pool) {
322 dma_free_attrs(to_dma_dev(g2d->drm_dev),
323 G2D_CMDLIST_POOL_SIZE,
324 g2d->cmdlist_pool_virt,
325 g2d->cmdlist_pool, g2d->cmdlist_dma_attrs);
329 static struct g2d_cmdlist_node *g2d_get_cmdlist(struct g2d_data *g2d)
331 struct device *dev = g2d->dev;
332 struct g2d_cmdlist_node *node;
334 mutex_lock(&g2d->cmdlist_mutex);
335 if (list_empty(&g2d->free_cmdlist)) {
336 dev_err(dev, "there is no free cmdlist\n");
337 mutex_unlock(&g2d->cmdlist_mutex);
338 return NULL;
341 node = list_first_entry(&g2d->free_cmdlist, struct g2d_cmdlist_node,
342 list);
343 list_del_init(&node->list);
344 mutex_unlock(&g2d->cmdlist_mutex);
346 return node;
349 static void g2d_put_cmdlist(struct g2d_data *g2d, struct g2d_cmdlist_node *node)
351 mutex_lock(&g2d->cmdlist_mutex);
352 list_move_tail(&node->list, &g2d->free_cmdlist);
353 mutex_unlock(&g2d->cmdlist_mutex);
356 static void g2d_add_cmdlist_to_inuse(struct drm_exynos_file_private *file_priv,
357 struct g2d_cmdlist_node *node)
359 struct g2d_cmdlist_node *lnode;
361 if (list_empty(&file_priv->inuse_cmdlist))
362 goto add_to_list;
364 /* this links to base address of new cmdlist */
365 lnode = list_entry(file_priv->inuse_cmdlist.prev,
366 struct g2d_cmdlist_node, list);
367 lnode->cmdlist->data[lnode->cmdlist->last] = node->dma_addr;
369 add_to_list:
370 list_add_tail(&node->list, &file_priv->inuse_cmdlist);
372 if (node->event)
373 list_add_tail(&node->event->base.link, &file_priv->event_list);
376 static void g2d_userptr_put_dma_addr(struct g2d_data *g2d,
377 void *obj,
378 bool force)
380 struct g2d_cmdlist_userptr *g2d_userptr = obj;
381 struct page **pages;
383 if (!obj)
384 return;
386 if (force)
387 goto out;
389 atomic_dec(&g2d_userptr->refcount);
391 if (atomic_read(&g2d_userptr->refcount) > 0)
392 return;
394 if (g2d_userptr->in_pool)
395 return;
397 out:
398 dma_unmap_sgtable(to_dma_dev(g2d->drm_dev), g2d_userptr->sgt,
399 DMA_BIDIRECTIONAL, 0);
401 pages = frame_vector_pages(g2d_userptr->vec);
402 if (!IS_ERR(pages)) {
403 int i;
405 for (i = 0; i < frame_vector_count(g2d_userptr->vec); i++)
406 set_page_dirty_lock(pages[i]);
408 put_vaddr_frames(g2d_userptr->vec);
409 frame_vector_destroy(g2d_userptr->vec);
411 if (!g2d_userptr->out_of_list)
412 list_del_init(&g2d_userptr->list);
414 sg_free_table(g2d_userptr->sgt);
415 kfree(g2d_userptr->sgt);
416 kfree(g2d_userptr);
419 static dma_addr_t *g2d_userptr_get_dma_addr(struct g2d_data *g2d,
420 unsigned long userptr,
421 unsigned long size,
422 struct drm_file *filp,
423 void **obj)
425 struct drm_exynos_file_private *file_priv = filp->driver_priv;
426 struct g2d_cmdlist_userptr *g2d_userptr;
427 struct sg_table *sgt;
428 unsigned long start, end;
429 unsigned int npages, offset;
430 int ret;
432 if (!size) {
433 DRM_DEV_ERROR(g2d->dev, "invalid userptr size.\n");
434 return ERR_PTR(-EINVAL);
437 /* check if userptr already exists in userptr_list. */
438 list_for_each_entry(g2d_userptr, &file_priv->userptr_list, list) {
439 if (g2d_userptr->userptr == userptr) {
441 * also check size because there could be same address
442 * and different size.
444 if (g2d_userptr->size == size) {
445 atomic_inc(&g2d_userptr->refcount);
446 *obj = g2d_userptr;
448 return &g2d_userptr->dma_addr;
452 * at this moment, maybe g2d dma is accessing this
453 * g2d_userptr memory region so just remove this
454 * g2d_userptr object from userptr_list not to be
455 * referred again and also except it the userptr
456 * pool to be released after the dma access completion.
458 g2d_userptr->out_of_list = true;
459 g2d_userptr->in_pool = false;
460 list_del_init(&g2d_userptr->list);
462 break;
466 g2d_userptr = kzalloc(sizeof(*g2d_userptr), GFP_KERNEL);
467 if (!g2d_userptr)
468 return ERR_PTR(-ENOMEM);
470 atomic_set(&g2d_userptr->refcount, 1);
471 g2d_userptr->size = size;
473 start = userptr & PAGE_MASK;
474 offset = userptr & ~PAGE_MASK;
475 end = PAGE_ALIGN(userptr + size);
476 npages = (end - start) >> PAGE_SHIFT;
477 g2d_userptr->vec = frame_vector_create(npages);
478 if (!g2d_userptr->vec) {
479 ret = -ENOMEM;
480 goto err_free;
483 ret = get_vaddr_frames(start, npages, FOLL_FORCE | FOLL_WRITE,
484 g2d_userptr->vec);
485 if (ret != npages) {
486 DRM_DEV_ERROR(g2d->dev,
487 "failed to get user pages from userptr.\n");
488 if (ret < 0)
489 goto err_destroy_framevec;
490 ret = -EFAULT;
491 goto err_put_framevec;
493 if (frame_vector_to_pages(g2d_userptr->vec) < 0) {
494 ret = -EFAULT;
495 goto err_put_framevec;
498 sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
499 if (!sgt) {
500 ret = -ENOMEM;
501 goto err_put_framevec;
504 ret = sg_alloc_table_from_pages(sgt,
505 frame_vector_pages(g2d_userptr->vec),
506 npages, offset, size, GFP_KERNEL);
507 if (ret < 0) {
508 DRM_DEV_ERROR(g2d->dev, "failed to get sgt from pages.\n");
509 goto err_free_sgt;
512 g2d_userptr->sgt = sgt;
514 ret = dma_map_sgtable(to_dma_dev(g2d->drm_dev), sgt,
515 DMA_BIDIRECTIONAL, 0);
516 if (ret) {
517 DRM_DEV_ERROR(g2d->dev, "failed to map sgt with dma region.\n");
518 goto err_sg_free_table;
521 g2d_userptr->dma_addr = sgt->sgl[0].dma_address;
522 g2d_userptr->userptr = userptr;
524 list_add_tail(&g2d_userptr->list, &file_priv->userptr_list);
526 if (g2d->current_pool + (npages << PAGE_SHIFT) < g2d->max_pool) {
527 g2d->current_pool += npages << PAGE_SHIFT;
528 g2d_userptr->in_pool = true;
531 *obj = g2d_userptr;
533 return &g2d_userptr->dma_addr;
535 err_sg_free_table:
536 sg_free_table(sgt);
538 err_free_sgt:
539 kfree(sgt);
541 err_put_framevec:
542 put_vaddr_frames(g2d_userptr->vec);
544 err_destroy_framevec:
545 frame_vector_destroy(g2d_userptr->vec);
547 err_free:
548 kfree(g2d_userptr);
550 return ERR_PTR(ret);
553 static void g2d_userptr_free_all(struct g2d_data *g2d, struct drm_file *filp)
555 struct drm_exynos_file_private *file_priv = filp->driver_priv;
556 struct g2d_cmdlist_userptr *g2d_userptr, *n;
558 list_for_each_entry_safe(g2d_userptr, n, &file_priv->userptr_list, list)
559 if (g2d_userptr->in_pool)
560 g2d_userptr_put_dma_addr(g2d, g2d_userptr, true);
562 g2d->current_pool = 0;
565 static enum g2d_reg_type g2d_get_reg_type(struct g2d_data *g2d, int reg_offset)
567 enum g2d_reg_type reg_type;
569 switch (reg_offset) {
570 case G2D_SRC_BASE_ADDR:
571 case G2D_SRC_STRIDE:
572 case G2D_SRC_COLOR_MODE:
573 case G2D_SRC_LEFT_TOP:
574 case G2D_SRC_RIGHT_BOTTOM:
575 reg_type = REG_TYPE_SRC;
576 break;
577 case G2D_SRC_PLANE2_BASE_ADDR:
578 reg_type = REG_TYPE_SRC_PLANE2;
579 break;
580 case G2D_DST_BASE_ADDR:
581 case G2D_DST_STRIDE:
582 case G2D_DST_COLOR_MODE:
583 case G2D_DST_LEFT_TOP:
584 case G2D_DST_RIGHT_BOTTOM:
585 reg_type = REG_TYPE_DST;
586 break;
587 case G2D_DST_PLANE2_BASE_ADDR:
588 reg_type = REG_TYPE_DST_PLANE2;
589 break;
590 case G2D_PAT_BASE_ADDR:
591 reg_type = REG_TYPE_PAT;
592 break;
593 case G2D_MSK_BASE_ADDR:
594 reg_type = REG_TYPE_MSK;
595 break;
596 default:
597 reg_type = REG_TYPE_NONE;
598 DRM_DEV_ERROR(g2d->dev, "Unknown register offset![%d]\n",
599 reg_offset);
600 break;
603 return reg_type;
606 static unsigned long g2d_get_buf_bpp(unsigned int format)
608 unsigned long bpp;
610 switch (format) {
611 case G2D_FMT_XRGB8888:
612 case G2D_FMT_ARGB8888:
613 bpp = 4;
614 break;
615 case G2D_FMT_RGB565:
616 case G2D_FMT_XRGB1555:
617 case G2D_FMT_ARGB1555:
618 case G2D_FMT_XRGB4444:
619 case G2D_FMT_ARGB4444:
620 bpp = 2;
621 break;
622 case G2D_FMT_PACKED_RGB888:
623 bpp = 3;
624 break;
625 default:
626 bpp = 1;
627 break;
630 return bpp;
633 static bool g2d_check_buf_desc_is_valid(struct g2d_data *g2d,
634 struct g2d_buf_desc *buf_desc,
635 enum g2d_reg_type reg_type,
636 unsigned long size)
638 int width, height;
639 unsigned long bpp, last_pos;
642 * check source and destination buffers only.
643 * so the others are always valid.
645 if (reg_type != REG_TYPE_SRC && reg_type != REG_TYPE_DST)
646 return true;
648 /* This check also makes sure that right_x > left_x. */
649 width = (int)buf_desc->right_x - (int)buf_desc->left_x;
650 if (width < G2D_LEN_MIN || width > G2D_LEN_MAX) {
651 DRM_DEV_ERROR(g2d->dev, "width[%d] is out of range!\n", width);
652 return false;
655 /* This check also makes sure that bottom_y > top_y. */
656 height = (int)buf_desc->bottom_y - (int)buf_desc->top_y;
657 if (height < G2D_LEN_MIN || height > G2D_LEN_MAX) {
658 DRM_DEV_ERROR(g2d->dev,
659 "height[%d] is out of range!\n", height);
660 return false;
663 bpp = g2d_get_buf_bpp(buf_desc->format);
665 /* Compute the position of the last byte that the engine accesses. */
666 last_pos = ((unsigned long)buf_desc->bottom_y - 1) *
667 (unsigned long)buf_desc->stride +
668 (unsigned long)buf_desc->right_x * bpp - 1;
671 * Since right_x > left_x and bottom_y > top_y we already know
672 * that the first_pos < last_pos (first_pos being the position
673 * of the first byte the engine accesses), it just remains to
674 * check if last_pos is smaller then the buffer size.
677 if (last_pos >= size) {
678 DRM_DEV_ERROR(g2d->dev, "last engine access position [%lu] "
679 "is out of range [%lu]!\n", last_pos, size);
680 return false;
683 return true;
686 static int g2d_map_cmdlist_gem(struct g2d_data *g2d,
687 struct g2d_cmdlist_node *node,
688 struct drm_device *drm_dev,
689 struct drm_file *file)
691 struct g2d_cmdlist *cmdlist = node->cmdlist;
692 struct g2d_buf_info *buf_info = &node->buf_info;
693 int offset;
694 int ret;
695 int i;
697 for (i = 0; i < buf_info->map_nr; i++) {
698 struct g2d_buf_desc *buf_desc;
699 enum g2d_reg_type reg_type;
700 int reg_pos;
701 unsigned long handle;
702 dma_addr_t *addr;
704 reg_pos = cmdlist->last - 2 * (i + 1);
706 offset = cmdlist->data[reg_pos];
707 handle = cmdlist->data[reg_pos + 1];
709 reg_type = g2d_get_reg_type(g2d, offset);
710 if (reg_type == REG_TYPE_NONE) {
711 ret = -EFAULT;
712 goto err;
715 buf_desc = &buf_info->descs[reg_type];
717 if (buf_info->types[reg_type] == BUF_TYPE_GEM) {
718 struct exynos_drm_gem *exynos_gem;
720 exynos_gem = exynos_drm_gem_get(file, handle);
721 if (!exynos_gem) {
722 ret = -EFAULT;
723 goto err;
726 if (!g2d_check_buf_desc_is_valid(g2d, buf_desc,
727 reg_type, exynos_gem->size)) {
728 exynos_drm_gem_put(exynos_gem);
729 ret = -EFAULT;
730 goto err;
733 addr = &exynos_gem->dma_addr;
734 buf_info->obj[reg_type] = exynos_gem;
735 } else {
736 struct drm_exynos_g2d_userptr g2d_userptr;
738 if (copy_from_user(&g2d_userptr, (void __user *)handle,
739 sizeof(struct drm_exynos_g2d_userptr))) {
740 ret = -EFAULT;
741 goto err;
744 if (!g2d_check_buf_desc_is_valid(g2d, buf_desc,
745 reg_type,
746 g2d_userptr.size)) {
747 ret = -EFAULT;
748 goto err;
751 addr = g2d_userptr_get_dma_addr(g2d,
752 g2d_userptr.userptr,
753 g2d_userptr.size,
754 file,
755 &buf_info->obj[reg_type]);
756 if (IS_ERR(addr)) {
757 ret = -EFAULT;
758 goto err;
762 cmdlist->data[reg_pos + 1] = *addr;
763 buf_info->reg_types[i] = reg_type;
766 return 0;
768 err:
769 buf_info->map_nr = i;
770 return ret;
773 static void g2d_unmap_cmdlist_gem(struct g2d_data *g2d,
774 struct g2d_cmdlist_node *node,
775 struct drm_file *filp)
777 struct g2d_buf_info *buf_info = &node->buf_info;
778 int i;
780 for (i = 0; i < buf_info->map_nr; i++) {
781 struct g2d_buf_desc *buf_desc;
782 enum g2d_reg_type reg_type;
783 void *obj;
785 reg_type = buf_info->reg_types[i];
787 buf_desc = &buf_info->descs[reg_type];
788 obj = buf_info->obj[reg_type];
790 if (buf_info->types[reg_type] == BUF_TYPE_GEM)
791 exynos_drm_gem_put(obj);
792 else
793 g2d_userptr_put_dma_addr(g2d, obj, false);
795 buf_info->reg_types[i] = REG_TYPE_NONE;
796 buf_info->obj[reg_type] = NULL;
797 buf_info->types[reg_type] = 0;
798 memset(buf_desc, 0x00, sizeof(*buf_desc));
801 buf_info->map_nr = 0;
804 static void g2d_dma_start(struct g2d_data *g2d,
805 struct g2d_runqueue_node *runqueue_node)
807 struct g2d_cmdlist_node *node =
808 list_first_entry(&runqueue_node->run_cmdlist,
809 struct g2d_cmdlist_node, list);
811 set_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags);
812 writel_relaxed(node->dma_addr, g2d->regs + G2D_DMA_SFR_BASE_ADDR);
813 writel_relaxed(G2D_DMA_START, g2d->regs + G2D_DMA_COMMAND);
816 static struct g2d_runqueue_node *g2d_get_runqueue_node(struct g2d_data *g2d)
818 struct g2d_runqueue_node *runqueue_node;
820 if (list_empty(&g2d->runqueue))
821 return NULL;
823 runqueue_node = list_first_entry(&g2d->runqueue,
824 struct g2d_runqueue_node, list);
825 list_del_init(&runqueue_node->list);
826 return runqueue_node;
829 static void g2d_free_runqueue_node(struct g2d_data *g2d,
830 struct g2d_runqueue_node *runqueue_node)
832 struct g2d_cmdlist_node *node;
834 mutex_lock(&g2d->cmdlist_mutex);
836 * commands in run_cmdlist have been completed so unmap all gem
837 * objects in each command node so that they are unreferenced.
839 list_for_each_entry(node, &runqueue_node->run_cmdlist, list)
840 g2d_unmap_cmdlist_gem(g2d, node, runqueue_node->filp);
841 list_splice_tail_init(&runqueue_node->run_cmdlist, &g2d->free_cmdlist);
842 mutex_unlock(&g2d->cmdlist_mutex);
844 kmem_cache_free(g2d->runqueue_slab, runqueue_node);
848 * g2d_remove_runqueue_nodes - remove items from the list of runqueue nodes
849 * @g2d: G2D state object
850 * @file: if not zero, only remove items with this DRM file
852 * Has to be called under runqueue lock.
854 static void g2d_remove_runqueue_nodes(struct g2d_data *g2d, struct drm_file *file)
856 struct g2d_runqueue_node *node, *n;
858 if (list_empty(&g2d->runqueue))
859 return;
861 list_for_each_entry_safe(node, n, &g2d->runqueue, list) {
862 if (file && node->filp != file)
863 continue;
865 list_del_init(&node->list);
866 g2d_free_runqueue_node(g2d, node);
870 static void g2d_runqueue_worker(struct work_struct *work)
872 struct g2d_data *g2d = container_of(work, struct g2d_data,
873 runqueue_work);
874 struct g2d_runqueue_node *runqueue_node;
877 * The engine is busy and the completion of the current node is going
878 * to poke the runqueue worker, so nothing to do here.
880 if (test_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags))
881 return;
883 mutex_lock(&g2d->runqueue_mutex);
885 runqueue_node = g2d->runqueue_node;
886 g2d->runqueue_node = NULL;
888 if (runqueue_node) {
889 pm_runtime_mark_last_busy(g2d->dev);
890 pm_runtime_put_autosuspend(g2d->dev);
892 complete(&runqueue_node->complete);
893 if (runqueue_node->async)
894 g2d_free_runqueue_node(g2d, runqueue_node);
897 if (!test_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags)) {
898 g2d->runqueue_node = g2d_get_runqueue_node(g2d);
900 if (g2d->runqueue_node) {
901 pm_runtime_get_sync(g2d->dev);
902 g2d_dma_start(g2d, g2d->runqueue_node);
906 mutex_unlock(&g2d->runqueue_mutex);
909 static void g2d_finish_event(struct g2d_data *g2d, u32 cmdlist_no)
911 struct drm_device *drm_dev = g2d->drm_dev;
912 struct g2d_runqueue_node *runqueue_node = g2d->runqueue_node;
913 struct drm_exynos_pending_g2d_event *e;
914 struct timespec64 now;
916 if (list_empty(&runqueue_node->event_list))
917 return;
919 e = list_first_entry(&runqueue_node->event_list,
920 struct drm_exynos_pending_g2d_event, base.link);
922 ktime_get_ts64(&now);
923 e->event.tv_sec = now.tv_sec;
924 e->event.tv_usec = now.tv_nsec / NSEC_PER_USEC;
925 e->event.cmdlist_no = cmdlist_no;
927 drm_send_event(drm_dev, &e->base);
930 static irqreturn_t g2d_irq_handler(int irq, void *dev_id)
932 struct g2d_data *g2d = dev_id;
933 u32 pending;
935 pending = readl_relaxed(g2d->regs + G2D_INTC_PEND);
936 if (pending)
937 writel_relaxed(pending, g2d->regs + G2D_INTC_PEND);
939 if (pending & G2D_INTP_GCMD_FIN) {
940 u32 cmdlist_no = readl_relaxed(g2d->regs + G2D_DMA_STATUS);
942 cmdlist_no = (cmdlist_no & G2D_DMA_LIST_DONE_COUNT) >>
943 G2D_DMA_LIST_DONE_COUNT_OFFSET;
945 g2d_finish_event(g2d, cmdlist_no);
947 writel_relaxed(0, g2d->regs + G2D_DMA_HOLD_CMD);
948 if (!(pending & G2D_INTP_ACMD_FIN)) {
949 writel_relaxed(G2D_DMA_CONTINUE,
950 g2d->regs + G2D_DMA_COMMAND);
954 if (pending & G2D_INTP_ACMD_FIN) {
955 clear_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags);
956 queue_work(g2d->g2d_workq, &g2d->runqueue_work);
959 return IRQ_HANDLED;
963 * g2d_wait_finish - wait for the G2D engine to finish the current runqueue node
964 * @g2d: G2D state object
965 * @file: if not zero, only wait if the current runqueue node belongs
966 * to the DRM file
968 * Should the engine not become idle after a 100ms timeout, a hardware
969 * reset is issued.
971 static void g2d_wait_finish(struct g2d_data *g2d, struct drm_file *file)
973 struct device *dev = g2d->dev;
975 struct g2d_runqueue_node *runqueue_node = NULL;
976 unsigned int tries = 10;
978 mutex_lock(&g2d->runqueue_mutex);
980 /* If no node is currently processed, we have nothing to do. */
981 if (!g2d->runqueue_node)
982 goto out;
984 runqueue_node = g2d->runqueue_node;
986 /* Check if the currently processed item belongs to us. */
987 if (file && runqueue_node->filp != file)
988 goto out;
990 mutex_unlock(&g2d->runqueue_mutex);
992 /* Wait for the G2D engine to finish. */
993 while (tries-- && (g2d->runqueue_node == runqueue_node))
994 mdelay(10);
996 mutex_lock(&g2d->runqueue_mutex);
998 if (g2d->runqueue_node != runqueue_node)
999 goto out;
1001 dev_err(dev, "wait timed out, resetting engine...\n");
1002 g2d_hw_reset(g2d);
1005 * After the hardware reset of the engine we are going to loose
1006 * the IRQ which triggers the PM runtime put().
1007 * So do this manually here.
1009 pm_runtime_mark_last_busy(dev);
1010 pm_runtime_put_autosuspend(dev);
1012 complete(&runqueue_node->complete);
1013 if (runqueue_node->async)
1014 g2d_free_runqueue_node(g2d, runqueue_node);
1016 out:
1017 mutex_unlock(&g2d->runqueue_mutex);
1020 static int g2d_check_reg_offset(struct g2d_data *g2d,
1021 struct g2d_cmdlist_node *node,
1022 int nr, bool for_addr)
1024 struct g2d_cmdlist *cmdlist = node->cmdlist;
1025 int reg_offset;
1026 int index;
1027 int i;
1029 for (i = 0; i < nr; i++) {
1030 struct g2d_buf_info *buf_info = &node->buf_info;
1031 struct g2d_buf_desc *buf_desc;
1032 enum g2d_reg_type reg_type;
1033 unsigned long value;
1035 index = cmdlist->last - 2 * (i + 1);
1037 reg_offset = cmdlist->data[index] & ~0xfffff000;
1038 if (reg_offset < G2D_VALID_START || reg_offset > G2D_VALID_END)
1039 goto err;
1040 if (reg_offset % 4)
1041 goto err;
1043 switch (reg_offset) {
1044 case G2D_SRC_BASE_ADDR:
1045 case G2D_SRC_PLANE2_BASE_ADDR:
1046 case G2D_DST_BASE_ADDR:
1047 case G2D_DST_PLANE2_BASE_ADDR:
1048 case G2D_PAT_BASE_ADDR:
1049 case G2D_MSK_BASE_ADDR:
1050 if (!for_addr)
1051 goto err;
1053 reg_type = g2d_get_reg_type(g2d, reg_offset);
1055 /* check userptr buffer type. */
1056 if ((cmdlist->data[index] & ~0x7fffffff) >> 31) {
1057 buf_info->types[reg_type] = BUF_TYPE_USERPTR;
1058 cmdlist->data[index] &= ~G2D_BUF_USERPTR;
1059 } else
1060 buf_info->types[reg_type] = BUF_TYPE_GEM;
1061 break;
1062 case G2D_SRC_STRIDE:
1063 case G2D_DST_STRIDE:
1064 if (for_addr)
1065 goto err;
1067 reg_type = g2d_get_reg_type(g2d, reg_offset);
1069 buf_desc = &buf_info->descs[reg_type];
1070 buf_desc->stride = cmdlist->data[index + 1];
1071 break;
1072 case G2D_SRC_COLOR_MODE:
1073 case G2D_DST_COLOR_MODE:
1074 if (for_addr)
1075 goto err;
1077 reg_type = g2d_get_reg_type(g2d, reg_offset);
1079 buf_desc = &buf_info->descs[reg_type];
1080 value = cmdlist->data[index + 1];
1082 buf_desc->format = value & 0xf;
1083 break;
1084 case G2D_SRC_LEFT_TOP:
1085 case G2D_DST_LEFT_TOP:
1086 if (for_addr)
1087 goto err;
1089 reg_type = g2d_get_reg_type(g2d, reg_offset);
1091 buf_desc = &buf_info->descs[reg_type];
1092 value = cmdlist->data[index + 1];
1094 buf_desc->left_x = value & 0x1fff;
1095 buf_desc->top_y = (value & 0x1fff0000) >> 16;
1096 break;
1097 case G2D_SRC_RIGHT_BOTTOM:
1098 case G2D_DST_RIGHT_BOTTOM:
1099 if (for_addr)
1100 goto err;
1102 reg_type = g2d_get_reg_type(g2d, reg_offset);
1104 buf_desc = &buf_info->descs[reg_type];
1105 value = cmdlist->data[index + 1];
1107 buf_desc->right_x = value & 0x1fff;
1108 buf_desc->bottom_y = (value & 0x1fff0000) >> 16;
1109 break;
1110 default:
1111 if (for_addr)
1112 goto err;
1113 break;
1117 return 0;
1119 err:
1120 dev_err(g2d->dev, "Bad register offset: 0x%lx\n", cmdlist->data[index]);
1121 return -EINVAL;
1124 /* ioctl functions */
1125 int exynos_g2d_get_ver_ioctl(struct drm_device *drm_dev, void *data,
1126 struct drm_file *file)
1128 struct drm_exynos_g2d_get_ver *ver = data;
1130 ver->major = G2D_HW_MAJOR_VER;
1131 ver->minor = G2D_HW_MINOR_VER;
1133 return 0;
1136 int exynos_g2d_set_cmdlist_ioctl(struct drm_device *drm_dev, void *data,
1137 struct drm_file *file)
1139 struct drm_exynos_file_private *file_priv = file->driver_priv;
1140 struct exynos_drm_private *priv = drm_dev->dev_private;
1141 struct g2d_data *g2d = dev_get_drvdata(priv->g2d_dev);
1142 struct drm_exynos_g2d_set_cmdlist *req = data;
1143 struct drm_exynos_g2d_cmd *cmd;
1144 struct drm_exynos_pending_g2d_event *e;
1145 struct g2d_cmdlist_node *node;
1146 struct g2d_cmdlist *cmdlist;
1147 int size;
1148 int ret;
1150 node = g2d_get_cmdlist(g2d);
1151 if (!node)
1152 return -ENOMEM;
1155 * To avoid an integer overflow for the later size computations, we
1156 * enforce a maximum number of submitted commands here. This limit is
1157 * sufficient for all conceivable usage cases of the G2D.
1159 if (req->cmd_nr > G2D_CMDLIST_DATA_NUM ||
1160 req->cmd_buf_nr > G2D_CMDLIST_DATA_NUM) {
1161 dev_err(g2d->dev, "number of submitted G2D commands exceeds limit\n");
1162 return -EINVAL;
1165 node->event = NULL;
1167 if (req->event_type != G2D_EVENT_NOT) {
1168 e = kzalloc(sizeof(*node->event), GFP_KERNEL);
1169 if (!e) {
1170 ret = -ENOMEM;
1171 goto err;
1174 e->event.base.type = DRM_EXYNOS_G2D_EVENT;
1175 e->event.base.length = sizeof(e->event);
1176 e->event.user_data = req->user_data;
1178 ret = drm_event_reserve_init(drm_dev, file, &e->base, &e->event.base);
1179 if (ret) {
1180 kfree(e);
1181 goto err;
1184 node->event = e;
1187 cmdlist = node->cmdlist;
1189 cmdlist->last = 0;
1192 * If don't clear SFR registers, the cmdlist is affected by register
1193 * values of previous cmdlist. G2D hw executes SFR clear command and
1194 * a next command at the same time then the next command is ignored and
1195 * is executed rightly from next next command, so needs a dummy command
1196 * to next command of SFR clear command.
1198 cmdlist->data[cmdlist->last++] = G2D_SOFT_RESET;
1199 cmdlist->data[cmdlist->last++] = G2D_SFRCLEAR;
1200 cmdlist->data[cmdlist->last++] = G2D_SRC_BASE_ADDR;
1201 cmdlist->data[cmdlist->last++] = 0;
1204 * 'LIST_HOLD' command should be set to the DMA_HOLD_CMD_REG
1205 * and GCF bit should be set to INTEN register if user wants
1206 * G2D interrupt event once current command list execution is
1207 * finished.
1208 * Otherwise only ACF bit should be set to INTEN register so
1209 * that one interrupt is occurred after all command lists
1210 * have been completed.
1212 if (node->event) {
1213 cmdlist->data[cmdlist->last++] = G2D_INTEN;
1214 cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF | G2D_INTEN_GCF;
1215 cmdlist->data[cmdlist->last++] = G2D_DMA_HOLD_CMD;
1216 cmdlist->data[cmdlist->last++] = G2D_LIST_HOLD;
1217 } else {
1218 cmdlist->data[cmdlist->last++] = G2D_INTEN;
1219 cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF;
1223 * Check the size of cmdlist. The 2 that is added last comes from
1224 * the implicit G2D_BITBLT_START that is appended once we have
1225 * checked all the submitted commands.
1227 size = cmdlist->last + req->cmd_nr * 2 + req->cmd_buf_nr * 2 + 2;
1228 if (size > G2D_CMDLIST_DATA_NUM) {
1229 dev_err(g2d->dev, "cmdlist size is too big\n");
1230 ret = -EINVAL;
1231 goto err_free_event;
1234 cmd = (struct drm_exynos_g2d_cmd *)(unsigned long)req->cmd;
1236 if (copy_from_user(cmdlist->data + cmdlist->last,
1237 (void __user *)cmd,
1238 sizeof(*cmd) * req->cmd_nr)) {
1239 ret = -EFAULT;
1240 goto err_free_event;
1242 cmdlist->last += req->cmd_nr * 2;
1244 ret = g2d_check_reg_offset(g2d, node, req->cmd_nr, false);
1245 if (ret < 0)
1246 goto err_free_event;
1248 node->buf_info.map_nr = req->cmd_buf_nr;
1249 if (req->cmd_buf_nr) {
1250 struct drm_exynos_g2d_cmd *cmd_buf;
1252 cmd_buf = (struct drm_exynos_g2d_cmd *)
1253 (unsigned long)req->cmd_buf;
1255 if (copy_from_user(cmdlist->data + cmdlist->last,
1256 (void __user *)cmd_buf,
1257 sizeof(*cmd_buf) * req->cmd_buf_nr)) {
1258 ret = -EFAULT;
1259 goto err_free_event;
1261 cmdlist->last += req->cmd_buf_nr * 2;
1263 ret = g2d_check_reg_offset(g2d, node, req->cmd_buf_nr, true);
1264 if (ret < 0)
1265 goto err_free_event;
1267 ret = g2d_map_cmdlist_gem(g2d, node, drm_dev, file);
1268 if (ret < 0)
1269 goto err_unmap;
1272 cmdlist->data[cmdlist->last++] = G2D_BITBLT_START;
1273 cmdlist->data[cmdlist->last++] = G2D_START_BITBLT;
1275 /* head */
1276 cmdlist->head = cmdlist->last / 2;
1278 /* tail */
1279 cmdlist->data[cmdlist->last] = 0;
1281 g2d_add_cmdlist_to_inuse(file_priv, node);
1283 return 0;
1285 err_unmap:
1286 g2d_unmap_cmdlist_gem(g2d, node, file);
1287 err_free_event:
1288 if (node->event)
1289 drm_event_cancel_free(drm_dev, &node->event->base);
1290 err:
1291 g2d_put_cmdlist(g2d, node);
1292 return ret;
1295 int exynos_g2d_exec_ioctl(struct drm_device *drm_dev, void *data,
1296 struct drm_file *file)
1298 struct drm_exynos_file_private *file_priv = file->driver_priv;
1299 struct exynos_drm_private *priv = drm_dev->dev_private;
1300 struct g2d_data *g2d = dev_get_drvdata(priv->g2d_dev);
1301 struct drm_exynos_g2d_exec *req = data;
1302 struct g2d_runqueue_node *runqueue_node;
1303 struct list_head *run_cmdlist;
1304 struct list_head *event_list;
1306 runqueue_node = kmem_cache_alloc(g2d->runqueue_slab, GFP_KERNEL);
1307 if (!runqueue_node)
1308 return -ENOMEM;
1310 run_cmdlist = &runqueue_node->run_cmdlist;
1311 event_list = &runqueue_node->event_list;
1312 INIT_LIST_HEAD(run_cmdlist);
1313 INIT_LIST_HEAD(event_list);
1314 init_completion(&runqueue_node->complete);
1315 runqueue_node->async = req->async;
1317 list_splice_init(&file_priv->inuse_cmdlist, run_cmdlist);
1318 list_splice_init(&file_priv->event_list, event_list);
1320 if (list_empty(run_cmdlist)) {
1321 dev_err(g2d->dev, "there is no inuse cmdlist\n");
1322 kmem_cache_free(g2d->runqueue_slab, runqueue_node);
1323 return -EPERM;
1326 mutex_lock(&g2d->runqueue_mutex);
1327 runqueue_node->pid = current->pid;
1328 runqueue_node->filp = file;
1329 list_add_tail(&runqueue_node->list, &g2d->runqueue);
1330 mutex_unlock(&g2d->runqueue_mutex);
1332 /* Let the runqueue know that there is work to do. */
1333 queue_work(g2d->g2d_workq, &g2d->runqueue_work);
1335 if (runqueue_node->async)
1336 goto out;
1338 wait_for_completion(&runqueue_node->complete);
1339 g2d_free_runqueue_node(g2d, runqueue_node);
1341 out:
1342 return 0;
1345 int g2d_open(struct drm_device *drm_dev, struct drm_file *file)
1347 struct drm_exynos_file_private *file_priv = file->driver_priv;
1349 INIT_LIST_HEAD(&file_priv->inuse_cmdlist);
1350 INIT_LIST_HEAD(&file_priv->event_list);
1351 INIT_LIST_HEAD(&file_priv->userptr_list);
1353 return 0;
1356 void g2d_close(struct drm_device *drm_dev, struct drm_file *file)
1358 struct drm_exynos_file_private *file_priv = file->driver_priv;
1359 struct exynos_drm_private *priv = drm_dev->dev_private;
1360 struct g2d_data *g2d;
1361 struct g2d_cmdlist_node *node, *n;
1363 if (!priv->g2d_dev)
1364 return;
1366 g2d = dev_get_drvdata(priv->g2d_dev);
1368 /* Remove the runqueue nodes that belong to us. */
1369 mutex_lock(&g2d->runqueue_mutex);
1370 g2d_remove_runqueue_nodes(g2d, file);
1371 mutex_unlock(&g2d->runqueue_mutex);
1374 * Wait for the runqueue worker to finish its current node.
1375 * After this the engine should no longer be accessing any
1376 * memory belonging to us.
1378 g2d_wait_finish(g2d, file);
1381 * Even after the engine is idle, there might still be stale cmdlists
1382 * (i.e. cmdlisst which we submitted but never executed) around, with
1383 * their corresponding GEM/userptr buffers.
1384 * Properly unmap these buffers here.
1386 mutex_lock(&g2d->cmdlist_mutex);
1387 list_for_each_entry_safe(node, n, &file_priv->inuse_cmdlist, list) {
1388 g2d_unmap_cmdlist_gem(g2d, node, file);
1389 list_move_tail(&node->list, &g2d->free_cmdlist);
1391 mutex_unlock(&g2d->cmdlist_mutex);
1393 /* release all g2d_userptr in pool. */
1394 g2d_userptr_free_all(g2d, file);
1397 static int g2d_bind(struct device *dev, struct device *master, void *data)
1399 struct g2d_data *g2d = dev_get_drvdata(dev);
1400 struct drm_device *drm_dev = data;
1401 struct exynos_drm_private *priv = drm_dev->dev_private;
1402 int ret;
1404 g2d->drm_dev = drm_dev;
1406 /* allocate dma-aware cmdlist buffer. */
1407 ret = g2d_init_cmdlist(g2d);
1408 if (ret < 0) {
1409 dev_err(dev, "cmdlist init failed\n");
1410 return ret;
1413 ret = exynos_drm_register_dma(drm_dev, dev, &g2d->dma_priv);
1414 if (ret < 0) {
1415 dev_err(dev, "failed to enable iommu.\n");
1416 g2d_fini_cmdlist(g2d);
1417 return ret;
1419 priv->g2d_dev = dev;
1421 dev_info(dev, "The Exynos G2D (ver %d.%d) successfully registered.\n",
1422 G2D_HW_MAJOR_VER, G2D_HW_MINOR_VER);
1423 return 0;
1426 static void g2d_unbind(struct device *dev, struct device *master, void *data)
1428 struct g2d_data *g2d = dev_get_drvdata(dev);
1429 struct drm_device *drm_dev = data;
1430 struct exynos_drm_private *priv = drm_dev->dev_private;
1432 /* Suspend operation and wait for engine idle. */
1433 set_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags);
1434 g2d_wait_finish(g2d, NULL);
1435 priv->g2d_dev = NULL;
1437 cancel_work_sync(&g2d->runqueue_work);
1438 exynos_drm_unregister_dma(g2d->drm_dev, dev, &g2d->dma_priv);
1441 static const struct component_ops g2d_component_ops = {
1442 .bind = g2d_bind,
1443 .unbind = g2d_unbind,
1446 static int g2d_probe(struct platform_device *pdev)
1448 struct device *dev = &pdev->dev;
1449 struct resource *res;
1450 struct g2d_data *g2d;
1451 int ret;
1453 g2d = devm_kzalloc(dev, sizeof(*g2d), GFP_KERNEL);
1454 if (!g2d)
1455 return -ENOMEM;
1457 g2d->runqueue_slab = kmem_cache_create("g2d_runqueue_slab",
1458 sizeof(struct g2d_runqueue_node), 0, 0, NULL);
1459 if (!g2d->runqueue_slab)
1460 return -ENOMEM;
1462 g2d->dev = dev;
1464 g2d->g2d_workq = create_singlethread_workqueue("g2d");
1465 if (!g2d->g2d_workq) {
1466 dev_err(dev, "failed to create workqueue\n");
1467 ret = -EINVAL;
1468 goto err_destroy_slab;
1471 INIT_WORK(&g2d->runqueue_work, g2d_runqueue_worker);
1472 INIT_LIST_HEAD(&g2d->free_cmdlist);
1473 INIT_LIST_HEAD(&g2d->runqueue);
1475 mutex_init(&g2d->cmdlist_mutex);
1476 mutex_init(&g2d->runqueue_mutex);
1478 g2d->gate_clk = devm_clk_get(dev, "fimg2d");
1479 if (IS_ERR(g2d->gate_clk)) {
1480 dev_err(dev, "failed to get gate clock\n");
1481 ret = PTR_ERR(g2d->gate_clk);
1482 goto err_destroy_workqueue;
1485 pm_runtime_use_autosuspend(dev);
1486 pm_runtime_set_autosuspend_delay(dev, 2000);
1487 pm_runtime_enable(dev);
1488 clear_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags);
1489 clear_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags);
1491 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1493 g2d->regs = devm_ioremap_resource(dev, res);
1494 if (IS_ERR(g2d->regs)) {
1495 ret = PTR_ERR(g2d->regs);
1496 goto err_put_clk;
1499 g2d->irq = platform_get_irq(pdev, 0);
1500 if (g2d->irq < 0) {
1501 ret = g2d->irq;
1502 goto err_put_clk;
1505 ret = devm_request_irq(dev, g2d->irq, g2d_irq_handler, 0,
1506 "drm_g2d", g2d);
1507 if (ret < 0) {
1508 dev_err(dev, "irq request failed\n");
1509 goto err_put_clk;
1512 g2d->max_pool = MAX_POOL;
1514 platform_set_drvdata(pdev, g2d);
1516 ret = component_add(dev, &g2d_component_ops);
1517 if (ret < 0) {
1518 dev_err(dev, "failed to register drm g2d device\n");
1519 goto err_put_clk;
1522 return 0;
1524 err_put_clk:
1525 pm_runtime_disable(dev);
1526 err_destroy_workqueue:
1527 destroy_workqueue(g2d->g2d_workq);
1528 err_destroy_slab:
1529 kmem_cache_destroy(g2d->runqueue_slab);
1530 return ret;
1533 static int g2d_remove(struct platform_device *pdev)
1535 struct g2d_data *g2d = platform_get_drvdata(pdev);
1537 component_del(&pdev->dev, &g2d_component_ops);
1539 /* There should be no locking needed here. */
1540 g2d_remove_runqueue_nodes(g2d, NULL);
1542 pm_runtime_dont_use_autosuspend(&pdev->dev);
1543 pm_runtime_disable(&pdev->dev);
1545 g2d_fini_cmdlist(g2d);
1546 destroy_workqueue(g2d->g2d_workq);
1547 kmem_cache_destroy(g2d->runqueue_slab);
1549 return 0;
1552 #ifdef CONFIG_PM_SLEEP
1553 static int g2d_suspend(struct device *dev)
1555 struct g2d_data *g2d = dev_get_drvdata(dev);
1558 * Suspend the runqueue worker operation and wait until the G2D
1559 * engine is idle.
1561 set_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags);
1562 g2d_wait_finish(g2d, NULL);
1563 flush_work(&g2d->runqueue_work);
1565 return 0;
1568 static int g2d_resume(struct device *dev)
1570 struct g2d_data *g2d = dev_get_drvdata(dev);
1572 clear_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags);
1573 queue_work(g2d->g2d_workq, &g2d->runqueue_work);
1575 return 0;
1577 #endif
1579 #ifdef CONFIG_PM
1580 static int g2d_runtime_suspend(struct device *dev)
1582 struct g2d_data *g2d = dev_get_drvdata(dev);
1584 clk_disable_unprepare(g2d->gate_clk);
1586 return 0;
1589 static int g2d_runtime_resume(struct device *dev)
1591 struct g2d_data *g2d = dev_get_drvdata(dev);
1592 int ret;
1594 ret = clk_prepare_enable(g2d->gate_clk);
1595 if (ret < 0)
1596 dev_warn(dev, "failed to enable clock.\n");
1598 return ret;
1600 #endif
1602 static const struct dev_pm_ops g2d_pm_ops = {
1603 SET_SYSTEM_SLEEP_PM_OPS(g2d_suspend, g2d_resume)
1604 SET_RUNTIME_PM_OPS(g2d_runtime_suspend, g2d_runtime_resume, NULL)
1607 static const struct of_device_id exynos_g2d_match[] = {
1608 { .compatible = "samsung,exynos5250-g2d" },
1609 { .compatible = "samsung,exynos4212-g2d" },
1612 MODULE_DEVICE_TABLE(of, exynos_g2d_match);
1614 struct platform_driver g2d_driver = {
1615 .probe = g2d_probe,
1616 .remove = g2d_remove,
1617 .driver = {
1618 .name = "exynos-drm-g2d",
1619 .owner = THIS_MODULE,
1620 .pm = &g2d_pm_ops,
1621 .of_match_table = exynos_g2d_match,