Merge tag 'io_uring-5.11-2021-01-16' of git://git.kernel.dk/linux-block
[linux/fpc-iii.git] / drivers / leds / leds-bcm6328.c
blob226d17d253ed321292ca56371148f493781ea353
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Driver for BCM6328 memory-mapped LEDs, based on leds-syscon.c
5 * Copyright 2015 Álvaro Fernández Rojas <noltari@gmail.com>
6 * Copyright 2015 Jonas Gorski <jogo@openwrt.org>
7 */
8 #include <linux/io.h>
9 #include <linux/leds.h>
10 #include <linux/module.h>
11 #include <linux/of.h>
12 #include <linux/platform_device.h>
13 #include <linux/spinlock.h>
15 #define BCM6328_REG_INIT 0x00
16 #define BCM6328_REG_MODE_HI 0x04
17 #define BCM6328_REG_MODE_LO 0x08
18 #define BCM6328_REG_HWDIS 0x0c
19 #define BCM6328_REG_STROBE 0x10
20 #define BCM6328_REG_LNKACTSEL_HI 0x14
21 #define BCM6328_REG_LNKACTSEL_LO 0x18
22 #define BCM6328_REG_RBACK 0x1c
23 #define BCM6328_REG_SERMUX 0x20
25 #define BCM6328_LED_MAX_COUNT 24
26 #define BCM6328_LED_DEF_DELAY 500
28 #define BCM6328_LED_BLINK_DELAYS 2
29 #define BCM6328_LED_BLINK_MS 20
31 #define BCM6328_LED_BLINK_MASK 0x3f
32 #define BCM6328_LED_BLINK1_SHIFT 0
33 #define BCM6328_LED_BLINK1_MASK (BCM6328_LED_BLINK_MASK << \
34 BCM6328_LED_BLINK1_SHIFT)
35 #define BCM6328_LED_BLINK2_SHIFT 6
36 #define BCM6328_LED_BLINK2_MASK (BCM6328_LED_BLINK_MASK << \
37 BCM6328_LED_BLINK2_SHIFT)
38 #define BCM6328_SERIAL_LED_EN BIT(12)
39 #define BCM6328_SERIAL_LED_MUX BIT(13)
40 #define BCM6328_SERIAL_LED_CLK_NPOL BIT(14)
41 #define BCM6328_SERIAL_LED_DATA_PPOL BIT(15)
42 #define BCM6328_SERIAL_LED_SHIFT_DIR BIT(16)
43 #define BCM6328_LED_SHIFT_TEST BIT(30)
44 #define BCM6328_LED_TEST BIT(31)
45 #define BCM6328_INIT_MASK (BCM6328_SERIAL_LED_EN | \
46 BCM6328_SERIAL_LED_MUX | \
47 BCM6328_SERIAL_LED_CLK_NPOL | \
48 BCM6328_SERIAL_LED_DATA_PPOL | \
49 BCM6328_SERIAL_LED_SHIFT_DIR)
51 #define BCM6328_LED_MODE_MASK 3
52 #define BCM6328_LED_MODE_ON 0
53 #define BCM6328_LED_MODE_BLINK1 1
54 #define BCM6328_LED_MODE_BLINK2 2
55 #define BCM6328_LED_MODE_OFF 3
56 #define BCM6328_LED_SHIFT(X) ((X) << 1)
58 /**
59 * struct bcm6328_led - state container for bcm6328 based LEDs
60 * @cdev: LED class device for this LED
61 * @mem: memory resource
62 * @lock: memory lock
63 * @pin: LED pin number
64 * @blink_leds: blinking LEDs
65 * @blink_delay: blinking delay
66 * @active_low: LED is active low
68 struct bcm6328_led {
69 struct led_classdev cdev;
70 void __iomem *mem;
71 spinlock_t *lock;
72 unsigned long pin;
73 unsigned long *blink_leds;
74 unsigned long *blink_delay;
75 bool active_low;
78 static void bcm6328_led_write(void __iomem *reg, unsigned long data)
80 #ifdef CONFIG_CPU_BIG_ENDIAN
81 iowrite32be(data, reg);
82 #else
83 writel(data, reg);
84 #endif
87 static unsigned long bcm6328_led_read(void __iomem *reg)
89 #ifdef CONFIG_CPU_BIG_ENDIAN
90 return ioread32be(reg);
91 #else
92 return readl(reg);
93 #endif
96 /**
97 * LEDMode 64 bits / 24 LEDs
98 * bits [31:0] -> LEDs 8-23
99 * bits [47:32] -> LEDs 0-7
100 * bits [63:48] -> unused
102 static unsigned long bcm6328_pin2shift(unsigned long pin)
104 if (pin < 8)
105 return pin + 16; /* LEDs 0-7 (bits 47:32) */
106 else
107 return pin - 8; /* LEDs 8-23 (bits 31:0) */
110 static void bcm6328_led_mode(struct bcm6328_led *led, unsigned long value)
112 void __iomem *mode;
113 unsigned long val, shift;
115 shift = bcm6328_pin2shift(led->pin);
116 if (shift / 16)
117 mode = led->mem + BCM6328_REG_MODE_HI;
118 else
119 mode = led->mem + BCM6328_REG_MODE_LO;
121 val = bcm6328_led_read(mode);
122 val &= ~(BCM6328_LED_MODE_MASK << BCM6328_LED_SHIFT(shift % 16));
123 val |= (value << BCM6328_LED_SHIFT(shift % 16));
124 bcm6328_led_write(mode, val);
127 static void bcm6328_led_set(struct led_classdev *led_cdev,
128 enum led_brightness value)
130 struct bcm6328_led *led =
131 container_of(led_cdev, struct bcm6328_led, cdev);
132 unsigned long flags;
134 spin_lock_irqsave(led->lock, flags);
136 /* Remove LED from cached HW blinking intervals */
137 led->blink_leds[0] &= ~BIT(led->pin);
138 led->blink_leds[1] &= ~BIT(led->pin);
140 /* Set LED on/off */
141 if ((led->active_low && value == LED_OFF) ||
142 (!led->active_low && value != LED_OFF))
143 bcm6328_led_mode(led, BCM6328_LED_MODE_ON);
144 else
145 bcm6328_led_mode(led, BCM6328_LED_MODE_OFF);
147 spin_unlock_irqrestore(led->lock, flags);
150 static unsigned long bcm6328_blink_delay(unsigned long delay)
152 unsigned long bcm6328_delay;
154 bcm6328_delay = delay + BCM6328_LED_BLINK_MS / 2;
155 bcm6328_delay = bcm6328_delay / BCM6328_LED_BLINK_MS;
156 if (bcm6328_delay == 0)
157 bcm6328_delay = 1;
159 return bcm6328_delay;
162 static int bcm6328_blink_set(struct led_classdev *led_cdev,
163 unsigned long *delay_on, unsigned long *delay_off)
165 struct bcm6328_led *led =
166 container_of(led_cdev, struct bcm6328_led, cdev);
167 unsigned long delay, flags;
168 int rc;
170 if (!*delay_on)
171 *delay_on = BCM6328_LED_DEF_DELAY;
172 if (!*delay_off)
173 *delay_off = BCM6328_LED_DEF_DELAY;
175 delay = bcm6328_blink_delay(*delay_on);
176 if (delay != bcm6328_blink_delay(*delay_off)) {
177 dev_dbg(led_cdev->dev,
178 "fallback to soft blinking (delay_on != delay_off)\n");
179 return -EINVAL;
182 if (delay > BCM6328_LED_BLINK_MASK) {
183 dev_dbg(led_cdev->dev,
184 "fallback to soft blinking (delay > %ums)\n",
185 BCM6328_LED_BLINK_MASK * BCM6328_LED_BLINK_MS);
186 return -EINVAL;
189 spin_lock_irqsave(led->lock, flags);
191 * Check if any of the two configurable HW blinking intervals is
192 * available:
193 * 1. No LEDs assigned to the HW blinking interval.
194 * 2. Only this LED is assigned to the HW blinking interval.
195 * 3. LEDs with the same delay assigned.
197 if (led->blink_leds[0] == 0 ||
198 led->blink_leds[0] == BIT(led->pin) ||
199 led->blink_delay[0] == delay) {
200 unsigned long val;
202 /* Add LED to the first HW blinking interval cache */
203 led->blink_leds[0] |= BIT(led->pin);
205 /* Remove LED from the second HW blinking interval cache */
206 led->blink_leds[1] &= ~BIT(led->pin);
208 /* Cache first HW blinking interval delay */
209 led->blink_delay[0] = delay;
211 /* Update the delay for the first HW blinking interval */
212 val = bcm6328_led_read(led->mem + BCM6328_REG_INIT);
213 val &= ~BCM6328_LED_BLINK1_MASK;
214 val |= (delay << BCM6328_LED_BLINK1_SHIFT);
215 bcm6328_led_write(led->mem + BCM6328_REG_INIT, val);
217 /* Set the LED to first HW blinking interval */
218 bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK1);
220 rc = 0;
221 } else if (led->blink_leds[1] == 0 ||
222 led->blink_leds[1] == BIT(led->pin) ||
223 led->blink_delay[1] == delay) {
224 unsigned long val;
226 /* Remove LED from the first HW blinking interval */
227 led->blink_leds[0] &= ~BIT(led->pin);
229 /* Add LED to the second HW blinking interval */
230 led->blink_leds[1] |= BIT(led->pin);
232 /* Cache second HW blinking interval delay */
233 led->blink_delay[1] = delay;
235 /* Update the delay for the second HW blinking interval */
236 val = bcm6328_led_read(led->mem + BCM6328_REG_INIT);
237 val &= ~BCM6328_LED_BLINK2_MASK;
238 val |= (delay << BCM6328_LED_BLINK2_SHIFT);
239 bcm6328_led_write(led->mem + BCM6328_REG_INIT, val);
241 /* Set the LED to second HW blinking interval */
242 bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK2);
244 rc = 0;
245 } else {
246 dev_dbg(led_cdev->dev,
247 "fallback to soft blinking (delay already set)\n");
248 rc = -EINVAL;
250 spin_unlock_irqrestore(led->lock, flags);
252 return rc;
255 static int bcm6328_hwled(struct device *dev, struct device_node *nc, u32 reg,
256 void __iomem *mem, spinlock_t *lock)
258 int i, cnt;
259 unsigned long flags, val;
261 spin_lock_irqsave(lock, flags);
262 val = bcm6328_led_read(mem + BCM6328_REG_HWDIS);
263 val &= ~BIT(reg);
264 bcm6328_led_write(mem + BCM6328_REG_HWDIS, val);
265 spin_unlock_irqrestore(lock, flags);
267 /* Only LEDs 0-7 can be activity/link controlled */
268 if (reg >= 8)
269 return 0;
271 cnt = of_property_count_elems_of_size(nc, "brcm,link-signal-sources",
272 sizeof(u32));
273 for (i = 0; i < cnt; i++) {
274 u32 sel;
275 void __iomem *addr;
277 if (reg < 4)
278 addr = mem + BCM6328_REG_LNKACTSEL_LO;
279 else
280 addr = mem + BCM6328_REG_LNKACTSEL_HI;
282 of_property_read_u32_index(nc, "brcm,link-signal-sources", i,
283 &sel);
285 if (reg / 4 != sel / 4) {
286 dev_warn(dev, "invalid link signal source\n");
287 continue;
290 spin_lock_irqsave(lock, flags);
291 val = bcm6328_led_read(addr);
292 val |= (BIT(reg % 4) << (((sel % 4) * 4) + 16));
293 bcm6328_led_write(addr, val);
294 spin_unlock_irqrestore(lock, flags);
297 cnt = of_property_count_elems_of_size(nc,
298 "brcm,activity-signal-sources",
299 sizeof(u32));
300 for (i = 0; i < cnt; i++) {
301 u32 sel;
302 void __iomem *addr;
304 if (reg < 4)
305 addr = mem + BCM6328_REG_LNKACTSEL_LO;
306 else
307 addr = mem + BCM6328_REG_LNKACTSEL_HI;
309 of_property_read_u32_index(nc, "brcm,activity-signal-sources",
310 i, &sel);
312 if (reg / 4 != sel / 4) {
313 dev_warn(dev, "invalid activity signal source\n");
314 continue;
317 spin_lock_irqsave(lock, flags);
318 val = bcm6328_led_read(addr);
319 val |= (BIT(reg % 4) << ((sel % 4) * 4));
320 bcm6328_led_write(addr, val);
321 spin_unlock_irqrestore(lock, flags);
324 return 0;
327 static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg,
328 void __iomem *mem, spinlock_t *lock,
329 unsigned long *blink_leds, unsigned long *blink_delay)
331 struct led_init_data init_data = {};
332 struct bcm6328_led *led;
333 const char *state;
334 int rc;
336 led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
337 if (!led)
338 return -ENOMEM;
340 led->pin = reg;
341 led->mem = mem;
342 led->lock = lock;
343 led->blink_leds = blink_leds;
344 led->blink_delay = blink_delay;
346 if (of_property_read_bool(nc, "active-low"))
347 led->active_low = true;
349 if (!of_property_read_string(nc, "default-state", &state)) {
350 if (!strcmp(state, "on")) {
351 led->cdev.brightness = LED_FULL;
352 } else if (!strcmp(state, "keep")) {
353 void __iomem *mode;
354 unsigned long val, shift;
356 shift = bcm6328_pin2shift(led->pin);
357 if (shift / 16)
358 mode = mem + BCM6328_REG_MODE_HI;
359 else
360 mode = mem + BCM6328_REG_MODE_LO;
362 val = bcm6328_led_read(mode) >>
363 BCM6328_LED_SHIFT(shift % 16);
364 val &= BCM6328_LED_MODE_MASK;
365 if ((led->active_low && val == BCM6328_LED_MODE_OFF) ||
366 (!led->active_low && val == BCM6328_LED_MODE_ON))
367 led->cdev.brightness = LED_FULL;
368 else
369 led->cdev.brightness = LED_OFF;
370 } else {
371 led->cdev.brightness = LED_OFF;
373 } else {
374 led->cdev.brightness = LED_OFF;
377 bcm6328_led_set(&led->cdev, led->cdev.brightness);
379 led->cdev.brightness_set = bcm6328_led_set;
380 led->cdev.blink_set = bcm6328_blink_set;
381 init_data.fwnode = of_fwnode_handle(nc);
383 rc = devm_led_classdev_register_ext(dev, &led->cdev, &init_data);
384 if (rc < 0)
385 return rc;
387 dev_dbg(dev, "registered LED %s\n", led->cdev.name);
389 return 0;
392 static int bcm6328_leds_probe(struct platform_device *pdev)
394 struct device *dev = &pdev->dev;
395 struct device_node *np = dev_of_node(&pdev->dev);
396 struct device_node *child;
397 void __iomem *mem;
398 spinlock_t *lock; /* memory lock */
399 unsigned long val, *blink_leds, *blink_delay;
401 mem = devm_platform_ioremap_resource(pdev, 0);
402 if (IS_ERR(mem))
403 return PTR_ERR(mem);
405 lock = devm_kzalloc(dev, sizeof(*lock), GFP_KERNEL);
406 if (!lock)
407 return -ENOMEM;
409 blink_leds = devm_kcalloc(dev, BCM6328_LED_BLINK_DELAYS,
410 sizeof(*blink_leds), GFP_KERNEL);
411 if (!blink_leds)
412 return -ENOMEM;
414 blink_delay = devm_kcalloc(dev, BCM6328_LED_BLINK_DELAYS,
415 sizeof(*blink_delay), GFP_KERNEL);
416 if (!blink_delay)
417 return -ENOMEM;
419 spin_lock_init(lock);
421 bcm6328_led_write(mem + BCM6328_REG_HWDIS, ~0);
422 bcm6328_led_write(mem + BCM6328_REG_LNKACTSEL_HI, 0);
423 bcm6328_led_write(mem + BCM6328_REG_LNKACTSEL_LO, 0);
425 val = bcm6328_led_read(mem + BCM6328_REG_INIT);
426 val &= ~(BCM6328_INIT_MASK);
427 if (of_property_read_bool(np, "brcm,serial-leds"))
428 val |= BCM6328_SERIAL_LED_EN;
429 if (of_property_read_bool(np, "brcm,serial-mux"))
430 val |= BCM6328_SERIAL_LED_MUX;
431 if (of_property_read_bool(np, "brcm,serial-clk-low"))
432 val |= BCM6328_SERIAL_LED_CLK_NPOL;
433 if (!of_property_read_bool(np, "brcm,serial-dat-low"))
434 val |= BCM6328_SERIAL_LED_DATA_PPOL;
435 if (!of_property_read_bool(np, "brcm,serial-shift-inv"))
436 val |= BCM6328_SERIAL_LED_SHIFT_DIR;
437 bcm6328_led_write(mem + BCM6328_REG_INIT, val);
439 for_each_available_child_of_node(np, child) {
440 int rc;
441 u32 reg;
443 if (of_property_read_u32(child, "reg", &reg))
444 continue;
446 if (reg >= BCM6328_LED_MAX_COUNT) {
447 dev_err(dev, "invalid LED (%u >= %d)\n", reg,
448 BCM6328_LED_MAX_COUNT);
449 continue;
452 if (of_property_read_bool(child, "brcm,hardware-controlled"))
453 rc = bcm6328_hwled(dev, child, reg, mem, lock);
454 else
455 rc = bcm6328_led(dev, child, reg, mem, lock,
456 blink_leds, blink_delay);
458 if (rc < 0) {
459 of_node_put(child);
460 return rc;
464 return 0;
467 static const struct of_device_id bcm6328_leds_of_match[] = {
468 { .compatible = "brcm,bcm6328-leds", },
469 { },
471 MODULE_DEVICE_TABLE(of, bcm6328_leds_of_match);
473 static struct platform_driver bcm6328_leds_driver = {
474 .probe = bcm6328_leds_probe,
475 .driver = {
476 .name = "leds-bcm6328",
477 .of_match_table = bcm6328_leds_of_match,
481 module_platform_driver(bcm6328_leds_driver);
483 MODULE_AUTHOR("Álvaro Fernández Rojas <noltari@gmail.com>");
484 MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
485 MODULE_DESCRIPTION("LED driver for BCM6328 controllers");
486 MODULE_LICENSE("GPL v2");
487 MODULE_ALIAS("platform:leds-bcm6328");