1 // SPDX-License-Identifier: GPL-2.0-only
3 * Linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
4 * flexcop-pci.c - covers the PCI part including DMA transfers
5 * see flexcop.c for copyright information
8 #define FC_LOG_PREFIX "flexcop-pci"
9 #include "flexcop-common.h"
11 static int enable_pid_filtering
= 1;
12 module_param(enable_pid_filtering
, int, 0444);
13 MODULE_PARM_DESC(enable_pid_filtering
,
14 "enable hardware pid filtering: supported values: 0 (fullts), 1");
16 static int irq_chk_intv
= 100;
17 module_param(irq_chk_intv
, int, 0644);
18 MODULE_PARM_DESC(irq_chk_intv
, "set the interval for IRQ streaming watchdog.");
20 #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
21 #define dprintk(level,args...) \
22 do { if ((debug & level)) printk(args); } while (0)
25 #define dprintk(level,args...)
26 #define DEBSTATUS " (debugging is not enabled)"
29 #define deb_info(args...) dprintk(0x01, args)
30 #define deb_reg(args...) dprintk(0x02, args)
31 #define deb_ts(args...) dprintk(0x04, args)
32 #define deb_irq(args...) dprintk(0x08, args)
33 #define deb_chk(args...) dprintk(0x10, args)
36 module_param(debug
, int, 0644);
37 MODULE_PARM_DESC(debug
,
38 "set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))."
41 #define DRIVER_VERSION "0.1"
42 #define DRIVER_NAME "flexcop-pci"
43 #define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@posteo.de>"
48 #define FC_PCI_INIT 0x01
49 #define FC_PCI_DMA_INIT 0x02
54 /* buffersize (at least for DMA1, need to be % 188 == 0,
55 * this logic is required */
56 #define FC_DEFAULT_DMA1_BUFSIZE (1280 * 188)
57 #define FC_DEFAULT_DMA2_BUFSIZE (10 * 188)
58 struct flexcop_dma dma
[2];
60 int active_dma1_addr
; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
61 u32 last_dma1_cur_pos
;
62 /* position of the pointer last time the timer/packet irq occurred */
68 unsigned long last_irq
;
70 struct delayed_work irq_check_work
;
71 struct flexcop_device
*fc_dev
;
74 static int lastwreg
, lastwval
, lastrreg
, lastrval
;
76 static flexcop_ibi_value
flexcop_pci_read_ibi_reg(struct flexcop_device
*fc
,
77 flexcop_ibi_register r
)
79 struct flexcop_pci
*fc_pci
= fc
->bus_specific
;
81 v
.raw
= readl(fc_pci
->io_mem
+ r
);
83 if (lastrreg
!= r
|| lastrval
!= v
.raw
) {
84 lastrreg
= r
; lastrval
= v
.raw
;
85 deb_reg("new rd: %3x: %08x\n", r
, v
.raw
);
91 static int flexcop_pci_write_ibi_reg(struct flexcop_device
*fc
,
92 flexcop_ibi_register r
, flexcop_ibi_value v
)
94 struct flexcop_pci
*fc_pci
= fc
->bus_specific
;
96 if (lastwreg
!= r
|| lastwval
!= v
.raw
) {
97 lastwreg
= r
; lastwval
= v
.raw
;
98 deb_reg("new wr: %3x: %08x\n", r
, v
.raw
);
101 writel(v
.raw
, fc_pci
->io_mem
+ r
);
105 static void flexcop_pci_irq_check_work(struct work_struct
*work
)
107 struct flexcop_pci
*fc_pci
=
108 container_of(work
, struct flexcop_pci
, irq_check_work
.work
);
109 struct flexcop_device
*fc
= fc_pci
->fc_dev
;
113 if (fc_pci
->count
== fc_pci
->count_prev
) {
114 deb_chk("no IRQ since the last check\n");
115 if (fc_pci
->stream_problem
++ == 3) {
116 struct dvb_demux_feed
*feed
;
117 deb_info("flexcop-pci: stream problem, resetting pid filter\n");
119 spin_lock_irq(&fc
->demux
.lock
);
120 list_for_each_entry(feed
, &fc
->demux
.feed_list
,
122 flexcop_pid_feed_control(fc
, feed
, 0);
125 list_for_each_entry(feed
, &fc
->demux
.feed_list
,
127 flexcop_pid_feed_control(fc
, feed
, 1);
129 spin_unlock_irq(&fc
->demux
.lock
);
131 fc_pci
->stream_problem
= 0;
134 fc_pci
->stream_problem
= 0;
135 fc_pci
->count_prev
= fc_pci
->count
;
139 schedule_delayed_work(&fc_pci
->irq_check_work
,
140 msecs_to_jiffies(irq_chk_intv
< 100 ? 100 : irq_chk_intv
));
143 /* When PID filtering is turned on, we use the timer IRQ, because small amounts
144 * of data need to be passed to the user space instantly as well. When PID
145 * filtering is turned off, we use the page-change-IRQ */
146 static irqreturn_t
flexcop_pci_isr(int irq
, void *dev_id
)
148 struct flexcop_pci
*fc_pci
= dev_id
;
149 struct flexcop_device
*fc
= fc_pci
->fc_dev
;
152 irqreturn_t ret
= IRQ_HANDLED
;
154 spin_lock_irqsave(&fc_pci
->irq_lock
, flags
);
155 v
= fc
->read_ibi_reg(fc
, irq_20c
);
158 if (v
.irq_20c
.Data_receiver_error
)
159 deb_chk("data receiver error\n");
160 if (v
.irq_20c
.Continuity_error_flag
)
161 deb_chk("Continuity error flag is set\n");
162 if (v
.irq_20c
.LLC_SNAP_FLAG_set
)
163 deb_chk("LLC_SNAP_FLAG_set is set\n");
164 if (v
.irq_20c
.Transport_Error
)
165 deb_chk("Transport error\n");
167 if ((fc_pci
->count
% 1000) == 0)
168 deb_chk("%d valid irq took place so far\n", fc_pci
->count
);
170 if (v
.irq_20c
.DMA1_IRQ_Status
== 1) {
171 if (fc_pci
->active_dma1_addr
== 0)
172 flexcop_pass_dmx_packets(fc_pci
->fc_dev
,
173 fc_pci
->dma
[0].cpu_addr0
,
174 fc_pci
->dma
[0].size
/ 188);
176 flexcop_pass_dmx_packets(fc_pci
->fc_dev
,
177 fc_pci
->dma
[0].cpu_addr1
,
178 fc_pci
->dma
[0].size
/ 188);
180 deb_irq("page change to page: %d\n",!fc_pci
->active_dma1_addr
);
181 fc_pci
->active_dma1_addr
= !fc_pci
->active_dma1_addr
;
182 /* for the timer IRQ we only can use buffer dmx feeding, because we don't have
183 * complete TS packets when reading from the DMA memory */
184 } else if (v
.irq_20c
.DMA1_Timer_Status
== 1) {
185 dma_addr_t cur_addr
=
186 fc
->read_ibi_reg(fc
,dma1_008
).dma_0x8
.dma_cur_addr
<< 2;
187 u32 cur_pos
= cur_addr
- fc_pci
->dma
[0].dma_addr0
;
189 deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, last_cur_pos: %08x ",
190 jiffies_to_usecs(jiffies
- fc_pci
->last_irq
),
191 v
.raw
, (unsigned long long)cur_addr
, cur_pos
,
192 fc_pci
->last_dma1_cur_pos
);
193 fc_pci
->last_irq
= jiffies
;
195 /* buffer end was reached, restarted from the beginning
196 * pass the data from last_cur_pos to the buffer end to the demux
198 if (cur_pos
< fc_pci
->last_dma1_cur_pos
) {
199 deb_irq(" end was reached: passing %d bytes ",
200 (fc_pci
->dma
[0].size
*2 - 1) -
201 fc_pci
->last_dma1_cur_pos
);
202 flexcop_pass_dmx_data(fc_pci
->fc_dev
,
203 fc_pci
->dma
[0].cpu_addr0
+
204 fc_pci
->last_dma1_cur_pos
,
205 (fc_pci
->dma
[0].size
*2) -
206 fc_pci
->last_dma1_cur_pos
);
207 fc_pci
->last_dma1_cur_pos
= 0;
210 if (cur_pos
> fc_pci
->last_dma1_cur_pos
) {
211 deb_irq(" passing %d bytes ",
212 cur_pos
- fc_pci
->last_dma1_cur_pos
);
213 flexcop_pass_dmx_data(fc_pci
->fc_dev
,
214 fc_pci
->dma
[0].cpu_addr0
+
215 fc_pci
->last_dma1_cur_pos
,
216 cur_pos
- fc_pci
->last_dma1_cur_pos
);
220 fc_pci
->last_dma1_cur_pos
= cur_pos
;
223 deb_irq("isr for flexcop called, apparently without reason (%08x)\n",
228 spin_unlock_irqrestore(&fc_pci
->irq_lock
, flags
);
232 static int flexcop_pci_stream_control(struct flexcop_device
*fc
, int onoff
)
234 struct flexcop_pci
*fc_pci
= fc
->bus_specific
;
236 flexcop_dma_config(fc
, &fc_pci
->dma
[0], FC_DMA_1
);
237 flexcop_dma_config(fc
, &fc_pci
->dma
[1], FC_DMA_2
);
238 flexcop_dma_config_timer(fc
, FC_DMA_1
, 0);
239 flexcop_dma_xfer_control(fc
, FC_DMA_1
,
240 FC_DMA_SUBADDR_0
| FC_DMA_SUBADDR_1
, 1);
241 deb_irq("DMA xfer enabled\n");
243 fc_pci
->last_dma1_cur_pos
= 0;
244 flexcop_dma_control_timer_irq(fc
, FC_DMA_1
, 1);
245 deb_irq("IRQ enabled\n");
246 fc_pci
->count_prev
= fc_pci
->count
;
248 flexcop_dma_control_timer_irq(fc
, FC_DMA_1
, 0);
249 deb_irq("IRQ disabled\n");
251 flexcop_dma_xfer_control(fc
, FC_DMA_1
,
252 FC_DMA_SUBADDR_0
| FC_DMA_SUBADDR_1
, 0);
253 deb_irq("DMA xfer disabled\n");
258 static int flexcop_pci_dma_init(struct flexcop_pci
*fc_pci
)
261 ret
= flexcop_dma_allocate(fc_pci
->pdev
, &fc_pci
->dma
[0],
262 FC_DEFAULT_DMA1_BUFSIZE
);
266 ret
= flexcop_dma_allocate(fc_pci
->pdev
, &fc_pci
->dma
[1],
267 FC_DEFAULT_DMA2_BUFSIZE
);
269 flexcop_dma_free(&fc_pci
->dma
[0]);
273 flexcop_sram_set_dest(fc_pci
->fc_dev
, FC_SRAM_DEST_MEDIA
|
274 FC_SRAM_DEST_NET
, FC_SRAM_DEST_TARGET_DMA1
);
275 flexcop_sram_set_dest(fc_pci
->fc_dev
, FC_SRAM_DEST_CAO
|
276 FC_SRAM_DEST_CAI
, FC_SRAM_DEST_TARGET_DMA2
);
277 fc_pci
->init_state
|= FC_PCI_DMA_INIT
;
281 static void flexcop_pci_dma_exit(struct flexcop_pci
*fc_pci
)
283 if (fc_pci
->init_state
& FC_PCI_DMA_INIT
) {
284 flexcop_dma_free(&fc_pci
->dma
[0]);
285 flexcop_dma_free(&fc_pci
->dma
[1]);
287 fc_pci
->init_state
&= ~FC_PCI_DMA_INIT
;
290 static int flexcop_pci_init(struct flexcop_pci
*fc_pci
)
294 info("card revision %x", fc_pci
->pdev
->revision
);
296 if ((ret
= pci_enable_device(fc_pci
->pdev
)) != 0)
298 pci_set_master(fc_pci
->pdev
);
300 if ((ret
= pci_request_regions(fc_pci
->pdev
, DRIVER_NAME
)) != 0)
301 goto err_pci_disable_device
;
303 fc_pci
->io_mem
= pci_iomap(fc_pci
->pdev
, 0, 0x800);
305 if (!fc_pci
->io_mem
) {
306 err("cannot map io memory\n");
308 goto err_pci_release_regions
;
311 pci_set_drvdata(fc_pci
->pdev
, fc_pci
);
312 spin_lock_init(&fc_pci
->irq_lock
);
313 if ((ret
= request_irq(fc_pci
->pdev
->irq
, flexcop_pci_isr
,
314 IRQF_SHARED
, DRIVER_NAME
, fc_pci
)) != 0)
315 goto err_pci_iounmap
;
317 fc_pci
->init_state
|= FC_PCI_INIT
;
321 pci_iounmap(fc_pci
->pdev
, fc_pci
->io_mem
);
322 err_pci_release_regions
:
323 pci_release_regions(fc_pci
->pdev
);
324 err_pci_disable_device
:
325 pci_disable_device(fc_pci
->pdev
);
329 static void flexcop_pci_exit(struct flexcop_pci
*fc_pci
)
331 if (fc_pci
->init_state
& FC_PCI_INIT
) {
332 free_irq(fc_pci
->pdev
->irq
, fc_pci
);
333 pci_iounmap(fc_pci
->pdev
, fc_pci
->io_mem
);
334 pci_release_regions(fc_pci
->pdev
);
335 pci_disable_device(fc_pci
->pdev
);
337 fc_pci
->init_state
&= ~FC_PCI_INIT
;
340 static int flexcop_pci_probe(struct pci_dev
*pdev
,
341 const struct pci_device_id
*ent
)
343 struct flexcop_device
*fc
;
344 struct flexcop_pci
*fc_pci
;
347 if ((fc
= flexcop_device_kmalloc(sizeof(struct flexcop_pci
))) == NULL
) {
348 err("out of memory\n");
352 /* general flexcop init */
353 fc_pci
= fc
->bus_specific
;
356 fc
->read_ibi_reg
= flexcop_pci_read_ibi_reg
;
357 fc
->write_ibi_reg
= flexcop_pci_write_ibi_reg
;
358 fc
->i2c_request
= flexcop_i2c_request
;
359 fc
->get_mac_addr
= flexcop_eeprom_check_mac_addr
;
360 fc
->stream_control
= flexcop_pci_stream_control
;
362 if (enable_pid_filtering
)
363 info("will use the HW PID filter.");
365 info("will pass the complete TS to the demuxer.");
367 fc
->pid_filtering
= enable_pid_filtering
;
368 fc
->bus_type
= FC_PCI
;
369 fc
->dev
= &pdev
->dev
;
370 fc
->owner
= THIS_MODULE
;
372 /* bus specific part */
374 if ((ret
= flexcop_pci_init(fc_pci
)) != 0)
378 if ((ret
= flexcop_device_initialize(fc
)) != 0)
382 if ((ret
= flexcop_pci_dma_init(fc_pci
)) != 0)
385 INIT_DELAYED_WORK(&fc_pci
->irq_check_work
, flexcop_pci_irq_check_work
);
387 if (irq_chk_intv
> 0)
388 schedule_delayed_work(&fc_pci
->irq_check_work
,
389 msecs_to_jiffies(irq_chk_intv
< 100 ?
395 flexcop_device_exit(fc
);
397 flexcop_pci_exit(fc_pci
);
399 flexcop_device_kfree(fc
);
403 /* in theory every _exit function should be called exactly two times,
404 * here and in the bail-out-part of the _init-function
406 static void flexcop_pci_remove(struct pci_dev
*pdev
)
408 struct flexcop_pci
*fc_pci
= pci_get_drvdata(pdev
);
410 if (irq_chk_intv
> 0)
411 cancel_delayed_work(&fc_pci
->irq_check_work
);
413 flexcop_pci_dma_exit(fc_pci
);
414 flexcop_device_exit(fc_pci
->fc_dev
);
415 flexcop_pci_exit(fc_pci
);
416 flexcop_device_kfree(fc_pci
->fc_dev
);
419 static const struct pci_device_id flexcop_pci_tbl
[] = {
420 { PCI_DEVICE(0x13d0, 0x2103) },
424 MODULE_DEVICE_TABLE(pci
, flexcop_pci_tbl
);
426 static struct pci_driver flexcop_pci_driver
= {
427 .name
= "b2c2_flexcop_pci",
428 .id_table
= flexcop_pci_tbl
,
429 .probe
= flexcop_pci_probe
,
430 .remove
= flexcop_pci_remove
,
433 module_pci_driver(flexcop_pci_driver
);
435 MODULE_AUTHOR(DRIVER_AUTHOR
);
436 MODULE_DESCRIPTION(DRIVER_NAME
);
437 MODULE_LICENSE("GPL");