1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /* sbc_gxx.c -- MTD map driver for Arcom Control Systems SBC-MediaGX,
3 SBC-GXm and SBC-GX1 series boards.
5 Copyright (C) 2001 Arcom Control System Ltd
8 The SBC-MediaGX / SBC-GXx has up to 16 MiB of
9 Intel StrataFlash (28F320/28F640) in x8 mode.
11 This driver uses the CFI probe and Intel Extended Command Set drivers.
13 The flash is accessed as follows:
15 16 KiB memory window at 0xdc000-0xdffff
17 Two IO address locations for paging
20 bit 0-7: address bit 14-21
22 bit 0-1: address bit 22-23
23 bit 7: 0 - reset/powered down
26 The single flash device is divided into 3 partition which appear as
29 25/04/2001 AJL (Arcom) Modified signon strings and partition sizes
30 (to support bzImages up to 638KiB-ish)
35 #include <linux/module.h>
36 #include <linux/ioport.h>
37 #include <linux/init.h>
40 #include <linux/mtd/mtd.h>
41 #include <linux/mtd/map.h>
42 #include <linux/mtd/partitions.h>
46 // - Hardware specific
48 #define WINDOW_START 0xdc000
50 /* Number of bits in offset. */
51 #define WINDOW_SHIFT 14
52 #define WINDOW_LENGTH (1 << WINDOW_SHIFT)
54 /* The bits for the offset into the window. */
55 #define WINDOW_MASK (WINDOW_LENGTH-1)
57 #define PAGE_IO_SIZE 2
59 /* bit 7 of 0x259 must be 1 to enable device. */
60 #define DEVICE_ENABLE 0x8000
62 // - Flash / Partition sizing
64 #define MAX_SIZE_KiB 16384
65 #define BOOT_PARTITION_SIZE_KiB 768
66 #define DATA_PARTITION_SIZE_KiB 1280
67 #define APP_PARTITION_SIZE_KiB 6144
71 static volatile int page_in_window
= -1; // Current page in window.
72 static void __iomem
*iomapadr
;
73 static DEFINE_SPINLOCK(sbc_gxx_spin
);
75 /* partition_info gives details on the logical partitions that the split the
76 * single flash device into. If the size if zero we use up to the end of the
78 static const struct mtd_partition partition_info
[] = {
79 { .name
= "SBC-GXx flash boot partition",
81 .size
= BOOT_PARTITION_SIZE_KiB
*1024 },
82 { .name
= "SBC-GXx flash data partition",
83 .offset
= BOOT_PARTITION_SIZE_KiB
*1024,
84 .size
= (DATA_PARTITION_SIZE_KiB
)*1024 },
85 { .name
= "SBC-GXx flash application partition",
86 .offset
= (BOOT_PARTITION_SIZE_KiB
+DATA_PARTITION_SIZE_KiB
)*1024 }
89 #define NUM_PARTITIONS 3
91 static inline void sbc_gxx_page(struct map_info
*map
, unsigned long ofs
)
93 unsigned long page
= ofs
>> WINDOW_SHIFT
;
95 if( page
!=page_in_window
) {
96 outw( page
| DEVICE_ENABLE
, PAGE_IO
);
97 page_in_window
= page
;
102 static map_word
sbc_gxx_read8(struct map_info
*map
, unsigned long ofs
)
105 spin_lock(&sbc_gxx_spin
);
106 sbc_gxx_page(map
, ofs
);
107 ret
.x
[0] = readb(iomapadr
+ (ofs
& WINDOW_MASK
));
108 spin_unlock(&sbc_gxx_spin
);
112 static void sbc_gxx_copy_from(struct map_info
*map
, void *to
, unsigned long from
, ssize_t len
)
115 unsigned long thislen
= len
;
116 if (len
> (WINDOW_LENGTH
- (from
& WINDOW_MASK
)))
117 thislen
= WINDOW_LENGTH
-(from
& WINDOW_MASK
);
119 spin_lock(&sbc_gxx_spin
);
120 sbc_gxx_page(map
, from
);
121 memcpy_fromio(to
, iomapadr
+ (from
& WINDOW_MASK
), thislen
);
122 spin_unlock(&sbc_gxx_spin
);
129 static void sbc_gxx_write8(struct map_info
*map
, map_word d
, unsigned long adr
)
131 spin_lock(&sbc_gxx_spin
);
132 sbc_gxx_page(map
, adr
);
133 writeb(d
.x
[0], iomapadr
+ (adr
& WINDOW_MASK
));
134 spin_unlock(&sbc_gxx_spin
);
137 static void sbc_gxx_copy_to(struct map_info
*map
, unsigned long to
, const void *from
, ssize_t len
)
140 unsigned long thislen
= len
;
141 if (len
> (WINDOW_LENGTH
- (to
& WINDOW_MASK
)))
142 thislen
= WINDOW_LENGTH
-(to
& WINDOW_MASK
);
144 spin_lock(&sbc_gxx_spin
);
145 sbc_gxx_page(map
, to
);
146 memcpy_toio(iomapadr
+ (to
& WINDOW_MASK
), from
, thislen
);
147 spin_unlock(&sbc_gxx_spin
);
154 static struct map_info sbc_gxx_map
= {
155 .name
= "SBC-GXx flash",
157 .size
= MAX_SIZE_KiB
*1024, /* this must be set to a maximum possible amount
158 of flash so the cfi probe routines find all
161 .read
= sbc_gxx_read8
,
162 .copy_from
= sbc_gxx_copy_from
,
163 .write
= sbc_gxx_write8
,
164 .copy_to
= sbc_gxx_copy_to
167 /* MTD device for all of the flash. */
168 static struct mtd_info
*all_mtd
;
170 static void cleanup_sbc_gxx(void)
173 mtd_device_unregister(all_mtd
);
174 map_destroy( all_mtd
);
178 release_region(PAGE_IO
,PAGE_IO_SIZE
);
181 static int __init
init_sbc_gxx(void)
183 iomapadr
= ioremap(WINDOW_START
, WINDOW_LENGTH
);
185 printk( KERN_ERR
"%s: failed to ioremap memory region\n",
190 if (!request_region( PAGE_IO
, PAGE_IO_SIZE
, "SBC-GXx flash")) {
191 printk( KERN_ERR
"%s: IO ports 0x%x-0x%x in use\n",
193 PAGE_IO
, PAGE_IO
+PAGE_IO_SIZE
-1 );
199 printk( KERN_INFO
"%s: IO:0x%x-0x%x MEM:0x%x-0x%x\n",
201 PAGE_IO
, PAGE_IO
+PAGE_IO_SIZE
-1,
202 WINDOW_START
, WINDOW_START
+WINDOW_LENGTH
-1 );
204 /* Probe for chip. */
205 all_mtd
= do_map_probe( "cfi_probe", &sbc_gxx_map
);
211 all_mtd
->owner
= THIS_MODULE
;
213 /* Create MTD devices for each partition. */
214 mtd_device_register(all_mtd
, partition_info
, NUM_PARTITIONS
);
219 module_init(init_sbc_gxx
);
220 module_exit(cleanup_sbc_gxx
);
222 MODULE_LICENSE("GPL");
223 MODULE_AUTHOR("Arcom Control Systems Ltd.");
224 MODULE_DESCRIPTION("MTD map driver for SBC-GXm and SBC-GX1 series boards");