drivers/mtd/nand/raw/sharpsl.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  *  Copyright (C) 2004 Richard Purdie
   4  *  Copyright (C) 2008 Dmitry Baryshkov
   5  *
   6  *  Based on Sharp's NAND driver sharp_sl.c
   7  */
   8
   9 #include <linux/genhd.h>
  10 #include <linux/slab.h>
  11 #include <linux/module.h>
  12 #include <linux/delay.h>
  13 #include <linux/mtd/mtd.h>
  14 #include <linux/mtd/rawnand.h>
  15 #include <linux/mtd/partitions.h>
  16 #include <linux/mtd/sharpsl.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/platform_device.h>
  19 #include <linux/io.h>
  20
  21 struct sharpsl_nand {
  22         struct nand_controller  controller;
  23         struct nand_chip        chip;
  24
  25         void __iomem            *io;
  26 };
  27
  28 static inline struct sharpsl_nand *mtd_to_sharpsl(struct mtd_info *mtd)
  29 {
  30         return container_of(mtd_to_nand(mtd), struct sharpsl_nand, chip);
  31 }
  32
  33 /* register offset */
  34 #define ECCLPLB         0x00    /* line parity 7 - 0 bit */
  35 #define ECCLPUB         0x04    /* line parity 15 - 8 bit */
  36 #define ECCCP           0x08    /* column parity 5 - 0 bit */
  37 #define ECCCNTR         0x0C    /* ECC byte counter */
  38 #define ECCCLRR         0x10    /* cleare ECC */
  39 #define FLASHIO         0x14    /* Flash I/O */
  40 #define FLASHCTL        0x18    /* Flash Control */
  41
  42 /* Flash control bit */
  43 #define FLRYBY          (1 << 5)
  44 #define FLCE1           (1 << 4)
  45 #define FLWP            (1 << 3)
  46 #define FLALE           (1 << 2)
  47 #define FLCLE           (1 << 1)
  48 #define FLCE0           (1 << 0)
  49
  50 /*
  51  *      hardware specific access to control-lines
  52  *      ctrl:
  53  *      NAND_CNE: bit 0 -> ! bit 0 & 4
  54  *      NAND_CLE: bit 1 -> bit 1
  55  *      NAND_ALE: bit 2 -> bit 2
  56  *
  57  */
  58 static void sharpsl_nand_hwcontrol(struct nand_chip *chip, int cmd,
  59                                    unsigned int ctrl)
  60 {
  61         struct sharpsl_nand *sharpsl = mtd_to_sharpsl(nand_to_mtd(chip));
  62
  63         if (ctrl & NAND_CTRL_CHANGE) {
  64                 unsigned char bits = ctrl & 0x07;
  65
  66                 bits |= (ctrl & 0x01) << 4;
  67
  68                 bits ^= 0x11;
  69
  70                 writeb((readb(sharpsl->io + FLASHCTL) & ~0x17) | bits, sharpsl->io + FLASHCTL);
  71         }
  72
  73         if (cmd != NAND_CMD_NONE)
  74                 writeb(cmd, chip->legacy.IO_ADDR_W);
  75 }
  76
  77 static int sharpsl_nand_dev_ready(struct nand_chip *chip)
  78 {
  79         struct sharpsl_nand *sharpsl = mtd_to_sharpsl(nand_to_mtd(chip));
  80         return !((readb(sharpsl->io + FLASHCTL) & FLRYBY) == 0);
  81 }
  82
  83 static void sharpsl_nand_enable_hwecc(struct nand_chip *chip, int mode)
  84 {
  85         struct sharpsl_nand *sharpsl = mtd_to_sharpsl(nand_to_mtd(chip));
  86         writeb(0, sharpsl->io + ECCCLRR);
  87 }
  88
  89 static int sharpsl_nand_calculate_ecc(struct nand_chip *chip,
  90                                       const u_char * dat, u_char * ecc_code)
  91 {
  92         struct sharpsl_nand *sharpsl = mtd_to_sharpsl(nand_to_mtd(chip));
  93         ecc_code[0] = ~readb(sharpsl->io + ECCLPUB);
  94         ecc_code[1] = ~readb(sharpsl->io + ECCLPLB);
  95         ecc_code[2] = (~readb(sharpsl->io + ECCCP) << 2) | 0x03;
  96         return readb(sharpsl->io + ECCCNTR) != 0;
  97 }
  98
  99 static int sharpsl_attach_chip(struct nand_chip *chip)
 100 {
 101         if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
 102                 return 0;
 103
 104         chip->ecc.size = 256;
 105         chip->ecc.bytes = 3;
 106         chip->ecc.strength = 1;
 107         chip->ecc.hwctl = sharpsl_nand_enable_hwecc;
 108         chip->ecc.calculate = sharpsl_nand_calculate_ecc;
 109         chip->ecc.correct = rawnand_sw_hamming_correct;
 110
 111         return 0;
 112 }
 113
 114 static const struct nand_controller_ops sharpsl_ops = {
 115         .attach_chip = sharpsl_attach_chip,
 116 };
 117
 118 /*
 119  * Main initialization routine
 120  */
 121 static int sharpsl_nand_probe(struct platform_device *pdev)
 122 {
 123         struct nand_chip *this;
 124         struct mtd_info *mtd;
 125         struct resource *r;
 126         int err = 0;
 127         struct sharpsl_nand *sharpsl;
 128         struct sharpsl_nand_platform_data *data = dev_get_platdata(&pdev->dev);
 129
 130         if (!data) {
 131                 dev_err(&pdev->dev, "no platform data!\n");
 132                 return -EINVAL;
 133         }
 134
 135         /* Allocate memory for MTD device structure and private data */
 136         sharpsl = kzalloc(sizeof(struct sharpsl_nand), GFP_KERNEL);
 137         if (!sharpsl)
 138                 return -ENOMEM;
 139
 140         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 141         if (!r) {
 142                 dev_err(&pdev->dev, "no io memory resource defined!\n");
 143                 err = -ENODEV;
 144                 goto err_get_res;
 145         }
 146
 147         /* map physical address */
 148         sharpsl->io = ioremap(r->start, resource_size(r));
 149         if (!sharpsl->io) {
 150                 dev_err(&pdev->dev, "ioremap to access Sharp SL NAND chip failed\n");
 151                 err = -EIO;
 152                 goto err_ioremap;
 153         }
 154
 155         /* Get pointer to private data */
 156         this = (struct nand_chip *)(&sharpsl->chip);
 157
 158         nand_controller_init(&sharpsl->controller);
 159         sharpsl->controller.ops = &sharpsl_ops;
 160         this->controller = &sharpsl->controller;
 161
 162         /* Link the private data with the MTD structure */
 163         mtd = nand_to_mtd(this);
 164         mtd->dev.parent = &pdev->dev;
 165         mtd_set_ooblayout(mtd, data->ecc_layout);
 166
 167         platform_set_drvdata(pdev, sharpsl);
 168
 169         /*
 170          * PXA initialize
 171          */
 172         writeb(readb(sharpsl->io + FLASHCTL) | FLWP, sharpsl->io + FLASHCTL);
 173
 174         /* Set address of NAND IO lines */
 175         this->legacy.IO_ADDR_R = sharpsl->io + FLASHIO;
 176         this->legacy.IO_ADDR_W = sharpsl->io + FLASHIO;
 177         /* Set address of hardware control function */
 178         this->legacy.cmd_ctrl = sharpsl_nand_hwcontrol;
 179         this->legacy.dev_ready = sharpsl_nand_dev_ready;
 180         /* 15 us command delay time */
 181         this->legacy.chip_delay = 15;
 182         this->badblock_pattern = data->badblock_pattern;
 183
 184         /* Scan to find existence of the device */
 185         err = nand_scan(this, 1);
 186         if (err)
 187                 goto err_scan;
 188
 189         /* Register the partitions */
 190         mtd->name = "sharpsl-nand";
 191
 192         err = mtd_device_parse_register(mtd, data->part_parsers, NULL,
 193                                         data->partitions, data->nr_partitions);
 194         if (err)
 195                 goto err_add;
 196
 197         /* Return happy */
 198         return 0;
 199
 200 err_add:
 201         nand_cleanup(this);
 202
 203 err_scan:
 204         iounmap(sharpsl->io);
 205 err_ioremap:
 206 err_get_res:
 207         kfree(sharpsl);
 208         return err;
 209 }
 210
 211 /*
 212  * Clean up routine
 213  */
 214 static int sharpsl_nand_remove(struct platform_device *pdev)
 215 {
 216         struct sharpsl_nand *sharpsl = platform_get_drvdata(pdev);
 217         struct nand_chip *chip = &sharpsl->chip;
 218         int ret;
 219
 220         /* Unregister device */
 221         ret = mtd_device_unregister(nand_to_mtd(chip));
 222         WARN_ON(ret);
 223
 224         /* Release resources */
 225         nand_cleanup(chip);
 226
 227         iounmap(sharpsl->io);
 228
 229         /* Free the driver's structure */
 230         kfree(sharpsl);
 231
 232         return 0;
 233 }
 234
 235 static struct platform_driver sharpsl_nand_driver = {
 236         .driver = {
 237                 .name   = "sharpsl-nand",
 238         },
 239         .probe          = sharpsl_nand_probe,
 240         .remove         = sharpsl_nand_remove,
 241 };
 242
 243 module_platform_driver(sharpsl_nand_driver);
 244
 245 MODULE_LICENSE("GPL");
 246 MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
 247 MODULE_DESCRIPTION("Device specific logic for NAND flash on Sharp SL-C7xx Series");