Merge tag 'io_uring-5.11-2021-01-16' of git://git.kernel.dk/linux-block
[linux/fpc-iii.git] / drivers / rtc / rtc-spear.c
blob833daeb7b60e506a38b569fa655b9783402791e3
1 /*
2 * drivers/rtc/rtc-spear.c
4 * Copyright (C) 2010 ST Microelectronics
5 * Rajeev Kumar<rajeev-dlh.kumar@st.com>
7 * This file is licensed under the terms of the GNU General Public
8 * License version 2. This program is licensed "as is" without any
9 * warranty of any kind, whether express or implied.
12 #include <linux/bcd.h>
13 #include <linux/clk.h>
14 #include <linux/delay.h>
15 #include <linux/init.h>
16 #include <linux/io.h>
17 #include <linux/irq.h>
18 #include <linux/module.h>
19 #include <linux/of.h>
20 #include <linux/platform_device.h>
21 #include <linux/rtc.h>
22 #include <linux/slab.h>
23 #include <linux/spinlock.h>
25 /* RTC registers */
26 #define TIME_REG 0x00
27 #define DATE_REG 0x04
28 #define ALARM_TIME_REG 0x08
29 #define ALARM_DATE_REG 0x0C
30 #define CTRL_REG 0x10
31 #define STATUS_REG 0x14
33 /* TIME_REG & ALARM_TIME_REG */
34 #define SECONDS_UNITS (0xf<<0) /* seconds units position */
35 #define SECONDS_TENS (0x7<<4) /* seconds tens position */
36 #define MINUTES_UNITS (0xf<<8) /* minutes units position */
37 #define MINUTES_TENS (0x7<<12) /* minutes tens position */
38 #define HOURS_UNITS (0xf<<16) /* hours units position */
39 #define HOURS_TENS (0x3<<20) /* hours tens position */
41 /* DATE_REG & ALARM_DATE_REG */
42 #define DAYS_UNITS (0xf<<0) /* days units position */
43 #define DAYS_TENS (0x3<<4) /* days tens position */
44 #define MONTHS_UNITS (0xf<<8) /* months units position */
45 #define MONTHS_TENS (0x1<<12) /* months tens position */
46 #define YEARS_UNITS (0xf<<16) /* years units position */
47 #define YEARS_TENS (0xf<<20) /* years tens position */
48 #define YEARS_HUNDREDS (0xf<<24) /* years hundereds position */
49 #define YEARS_MILLENIUMS (0xf<<28) /* years millenium position */
51 /* MASK SHIFT TIME_REG & ALARM_TIME_REG*/
52 #define SECOND_SHIFT 0x00 /* seconds units */
53 #define MINUTE_SHIFT 0x08 /* minutes units position */
54 #define HOUR_SHIFT 0x10 /* hours units position */
55 #define MDAY_SHIFT 0x00 /* Month day shift */
56 #define MONTH_SHIFT 0x08 /* Month shift */
57 #define YEAR_SHIFT 0x10 /* Year shift */
59 #define SECOND_MASK 0x7F
60 #define MIN_MASK 0x7F
61 #define HOUR_MASK 0x3F
62 #define DAY_MASK 0x3F
63 #define MONTH_MASK 0x7F
64 #define YEAR_MASK 0xFFFF
66 /* date reg equal to time reg, for debug only */
67 #define TIME_BYP (1<<9)
68 #define INT_ENABLE (1<<31) /* interrupt enable */
70 /* STATUS_REG */
71 #define CLK_UNCONNECTED (1<<0)
72 #define PEND_WR_TIME (1<<2)
73 #define PEND_WR_DATE (1<<3)
74 #define LOST_WR_TIME (1<<4)
75 #define LOST_WR_DATE (1<<5)
76 #define RTC_INT_MASK (1<<31)
77 #define STATUS_BUSY (PEND_WR_TIME | PEND_WR_DATE)
78 #define STATUS_FAIL (LOST_WR_TIME | LOST_WR_DATE)
80 struct spear_rtc_config {
81 struct rtc_device *rtc;
82 struct clk *clk;
83 spinlock_t lock;
84 void __iomem *ioaddr;
85 unsigned int irq_wake;
88 static inline void spear_rtc_clear_interrupt(struct spear_rtc_config *config)
90 unsigned int val;
91 unsigned long flags;
93 spin_lock_irqsave(&config->lock, flags);
94 val = readl(config->ioaddr + STATUS_REG);
95 val |= RTC_INT_MASK;
96 writel(val, config->ioaddr + STATUS_REG);
97 spin_unlock_irqrestore(&config->lock, flags);
100 static inline void spear_rtc_enable_interrupt(struct spear_rtc_config *config)
102 unsigned int val;
104 val = readl(config->ioaddr + CTRL_REG);
105 if (!(val & INT_ENABLE)) {
106 spear_rtc_clear_interrupt(config);
107 val |= INT_ENABLE;
108 writel(val, config->ioaddr + CTRL_REG);
112 static inline void spear_rtc_disable_interrupt(struct spear_rtc_config *config)
114 unsigned int val;
116 val = readl(config->ioaddr + CTRL_REG);
117 if (val & INT_ENABLE) {
118 val &= ~INT_ENABLE;
119 writel(val, config->ioaddr + CTRL_REG);
123 static inline int is_write_complete(struct spear_rtc_config *config)
125 int ret = 0;
126 unsigned long flags;
128 spin_lock_irqsave(&config->lock, flags);
129 if ((readl(config->ioaddr + STATUS_REG)) & STATUS_FAIL)
130 ret = -EIO;
131 spin_unlock_irqrestore(&config->lock, flags);
133 return ret;
136 static void rtc_wait_not_busy(struct spear_rtc_config *config)
138 int status, count = 0;
139 unsigned long flags;
141 /* Assuming BUSY may stay active for 80 msec) */
142 for (count = 0; count < 80; count++) {
143 spin_lock_irqsave(&config->lock, flags);
144 status = readl(config->ioaddr + STATUS_REG);
145 spin_unlock_irqrestore(&config->lock, flags);
146 if ((status & STATUS_BUSY) == 0)
147 break;
148 /* check status busy, after each msec */
149 msleep(1);
153 static irqreturn_t spear_rtc_irq(int irq, void *dev_id)
155 struct spear_rtc_config *config = dev_id;
156 unsigned long flags, events = 0;
157 unsigned int irq_data;
159 spin_lock_irqsave(&config->lock, flags);
160 irq_data = readl(config->ioaddr + STATUS_REG);
161 spin_unlock_irqrestore(&config->lock, flags);
163 if ((irq_data & RTC_INT_MASK)) {
164 spear_rtc_clear_interrupt(config);
165 events = RTC_IRQF | RTC_AF;
166 rtc_update_irq(config->rtc, 1, events);
167 return IRQ_HANDLED;
168 } else
169 return IRQ_NONE;
173 static void tm2bcd(struct rtc_time *tm)
175 tm->tm_sec = bin2bcd(tm->tm_sec);
176 tm->tm_min = bin2bcd(tm->tm_min);
177 tm->tm_hour = bin2bcd(tm->tm_hour);
178 tm->tm_mday = bin2bcd(tm->tm_mday);
179 tm->tm_mon = bin2bcd(tm->tm_mon + 1);
180 tm->tm_year = bin2bcd(tm->tm_year);
183 static void bcd2tm(struct rtc_time *tm)
185 tm->tm_sec = bcd2bin(tm->tm_sec);
186 tm->tm_min = bcd2bin(tm->tm_min);
187 tm->tm_hour = bcd2bin(tm->tm_hour);
188 tm->tm_mday = bcd2bin(tm->tm_mday);
189 tm->tm_mon = bcd2bin(tm->tm_mon) - 1;
190 /* epoch == 1900 */
191 tm->tm_year = bcd2bin(tm->tm_year);
195 * spear_rtc_read_time - set the time
196 * @dev: rtc device in use
197 * @tm: holds date and time
199 * This function read time and date. On success it will return 0
200 * otherwise -ve error is returned.
202 static int spear_rtc_read_time(struct device *dev, struct rtc_time *tm)
204 struct spear_rtc_config *config = dev_get_drvdata(dev);
205 unsigned int time, date;
207 /* we don't report wday/yday/isdst ... */
208 rtc_wait_not_busy(config);
210 time = readl(config->ioaddr + TIME_REG);
211 date = readl(config->ioaddr + DATE_REG);
212 tm->tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK;
213 tm->tm_min = (time >> MINUTE_SHIFT) & MIN_MASK;
214 tm->tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK;
215 tm->tm_mday = (date >> MDAY_SHIFT) & DAY_MASK;
216 tm->tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK;
217 tm->tm_year = (date >> YEAR_SHIFT) & YEAR_MASK;
219 bcd2tm(tm);
220 return 0;
224 * spear_rtc_set_time - set the time
225 * @dev: rtc device in use
226 * @tm: holds date and time
228 * This function set time and date. On success it will return 0
229 * otherwise -ve error is returned.
231 static int spear_rtc_set_time(struct device *dev, struct rtc_time *tm)
233 struct spear_rtc_config *config = dev_get_drvdata(dev);
234 unsigned int time, date;
236 tm2bcd(tm);
238 rtc_wait_not_busy(config);
239 time = (tm->tm_sec << SECOND_SHIFT) | (tm->tm_min << MINUTE_SHIFT) |
240 (tm->tm_hour << HOUR_SHIFT);
241 date = (tm->tm_mday << MDAY_SHIFT) | (tm->tm_mon << MONTH_SHIFT) |
242 (tm->tm_year << YEAR_SHIFT);
243 writel(time, config->ioaddr + TIME_REG);
244 writel(date, config->ioaddr + DATE_REG);
246 return is_write_complete(config);
250 * spear_rtc_read_alarm - read the alarm time
251 * @dev: rtc device in use
252 * @alm: holds alarm date and time
254 * This function read alarm time and date. On success it will return 0
255 * otherwise -ve error is returned.
257 static int spear_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
259 struct spear_rtc_config *config = dev_get_drvdata(dev);
260 unsigned int time, date;
262 rtc_wait_not_busy(config);
264 time = readl(config->ioaddr + ALARM_TIME_REG);
265 date = readl(config->ioaddr + ALARM_DATE_REG);
266 alm->time.tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK;
267 alm->time.tm_min = (time >> MINUTE_SHIFT) & MIN_MASK;
268 alm->time.tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK;
269 alm->time.tm_mday = (date >> MDAY_SHIFT) & DAY_MASK;
270 alm->time.tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK;
271 alm->time.tm_year = (date >> YEAR_SHIFT) & YEAR_MASK;
273 bcd2tm(&alm->time);
274 alm->enabled = readl(config->ioaddr + CTRL_REG) & INT_ENABLE;
276 return 0;
280 * spear_rtc_set_alarm - set the alarm time
281 * @dev: rtc device in use
282 * @alm: holds alarm date and time
284 * This function set alarm time and date. On success it will return 0
285 * otherwise -ve error is returned.
287 static int spear_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
289 struct spear_rtc_config *config = dev_get_drvdata(dev);
290 unsigned int time, date;
291 int err;
293 tm2bcd(&alm->time);
295 rtc_wait_not_busy(config);
297 time = (alm->time.tm_sec << SECOND_SHIFT) | (alm->time.tm_min <<
298 MINUTE_SHIFT) | (alm->time.tm_hour << HOUR_SHIFT);
299 date = (alm->time.tm_mday << MDAY_SHIFT) | (alm->time.tm_mon <<
300 MONTH_SHIFT) | (alm->time.tm_year << YEAR_SHIFT);
302 writel(time, config->ioaddr + ALARM_TIME_REG);
303 writel(date, config->ioaddr + ALARM_DATE_REG);
304 err = is_write_complete(config);
305 if (err < 0)
306 return err;
308 if (alm->enabled)
309 spear_rtc_enable_interrupt(config);
310 else
311 spear_rtc_disable_interrupt(config);
313 return 0;
316 static int spear_alarm_irq_enable(struct device *dev, unsigned int enabled)
318 struct spear_rtc_config *config = dev_get_drvdata(dev);
319 int ret = 0;
321 spear_rtc_clear_interrupt(config);
323 switch (enabled) {
324 case 0:
325 /* alarm off */
326 spear_rtc_disable_interrupt(config);
327 break;
328 case 1:
329 /* alarm on */
330 spear_rtc_enable_interrupt(config);
331 break;
332 default:
333 ret = -EINVAL;
334 break;
337 return ret;
340 static const struct rtc_class_ops spear_rtc_ops = {
341 .read_time = spear_rtc_read_time,
342 .set_time = spear_rtc_set_time,
343 .read_alarm = spear_rtc_read_alarm,
344 .set_alarm = spear_rtc_set_alarm,
345 .alarm_irq_enable = spear_alarm_irq_enable,
348 static int spear_rtc_probe(struct platform_device *pdev)
350 struct spear_rtc_config *config;
351 int status = 0;
352 int irq;
354 config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
355 if (!config)
356 return -ENOMEM;
358 /* alarm irqs */
359 irq = platform_get_irq(pdev, 0);
360 if (irq < 0)
361 return irq;
363 status = devm_request_irq(&pdev->dev, irq, spear_rtc_irq, 0, pdev->name,
364 config);
365 if (status) {
366 dev_err(&pdev->dev, "Alarm interrupt IRQ%d already claimed\n",
367 irq);
368 return status;
371 config->ioaddr = devm_platform_ioremap_resource(pdev, 0);
372 if (IS_ERR(config->ioaddr))
373 return PTR_ERR(config->ioaddr);
375 config->clk = devm_clk_get(&pdev->dev, NULL);
376 if (IS_ERR(config->clk))
377 return PTR_ERR(config->clk);
379 status = clk_prepare_enable(config->clk);
380 if (status < 0)
381 return status;
383 spin_lock_init(&config->lock);
384 platform_set_drvdata(pdev, config);
386 config->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
387 &spear_rtc_ops, THIS_MODULE);
388 if (IS_ERR(config->rtc)) {
389 dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
390 PTR_ERR(config->rtc));
391 status = PTR_ERR(config->rtc);
392 goto err_disable_clock;
395 config->rtc->uie_unsupported = 1;
397 if (!device_can_wakeup(&pdev->dev))
398 device_init_wakeup(&pdev->dev, 1);
400 return 0;
402 err_disable_clock:
403 clk_disable_unprepare(config->clk);
405 return status;
408 static int spear_rtc_remove(struct platform_device *pdev)
410 struct spear_rtc_config *config = platform_get_drvdata(pdev);
412 spear_rtc_disable_interrupt(config);
413 clk_disable_unprepare(config->clk);
414 device_init_wakeup(&pdev->dev, 0);
416 return 0;
419 #ifdef CONFIG_PM_SLEEP
420 static int spear_rtc_suspend(struct device *dev)
422 struct platform_device *pdev = to_platform_device(dev);
423 struct spear_rtc_config *config = platform_get_drvdata(pdev);
424 int irq;
426 irq = platform_get_irq(pdev, 0);
427 if (device_may_wakeup(&pdev->dev)) {
428 if (!enable_irq_wake(irq))
429 config->irq_wake = 1;
430 } else {
431 spear_rtc_disable_interrupt(config);
432 clk_disable(config->clk);
435 return 0;
438 static int spear_rtc_resume(struct device *dev)
440 struct platform_device *pdev = to_platform_device(dev);
441 struct spear_rtc_config *config = platform_get_drvdata(pdev);
442 int irq;
444 irq = platform_get_irq(pdev, 0);
446 if (device_may_wakeup(&pdev->dev)) {
447 if (config->irq_wake) {
448 disable_irq_wake(irq);
449 config->irq_wake = 0;
451 } else {
452 clk_enable(config->clk);
453 spear_rtc_enable_interrupt(config);
456 return 0;
458 #endif
460 static SIMPLE_DEV_PM_OPS(spear_rtc_pm_ops, spear_rtc_suspend, spear_rtc_resume);
462 static void spear_rtc_shutdown(struct platform_device *pdev)
464 struct spear_rtc_config *config = platform_get_drvdata(pdev);
466 spear_rtc_disable_interrupt(config);
467 clk_disable(config->clk);
470 #ifdef CONFIG_OF
471 static const struct of_device_id spear_rtc_id_table[] = {
472 { .compatible = "st,spear600-rtc" },
475 MODULE_DEVICE_TABLE(of, spear_rtc_id_table);
476 #endif
478 static struct platform_driver spear_rtc_driver = {
479 .probe = spear_rtc_probe,
480 .remove = spear_rtc_remove,
481 .shutdown = spear_rtc_shutdown,
482 .driver = {
483 .name = "rtc-spear",
484 .pm = &spear_rtc_pm_ops,
485 .of_match_table = of_match_ptr(spear_rtc_id_table),
489 module_platform_driver(spear_rtc_driver);
491 MODULE_ALIAS("platform:rtc-spear");
492 MODULE_AUTHOR("Rajeev Kumar <rajeev-dlh.kumar@st.com>");
493 MODULE_DESCRIPTION("ST SPEAr Realtime Clock Driver (RTC)");
494 MODULE_LICENSE("GPL");