Makefile

   1 VERSION = 4
   2 PATCHLEVEL = 4
   3 SUBLEVEL = 178
   4 EXTRAVERSION =
   5 NAME = Blurry Fish Butt
   6
   7 # *DOCUMENTATION*
   8 # To see a list of typical targets execute "make help"
   9 # More info can be located in ./README
  10 # Comments in this file are targeted only to the developer, do not
  11 # expect to learn how to build the kernel reading this file.
  12
  13 # o Do not use make's built-in rules and variables
  14 #   (this increases performance and avoids hard-to-debug behaviour);
  15 # o Look for make include files relative to root of kernel src
  16 MAKEFLAGS += -rR --include-dir=$(CURDIR)
  17
  18 # Avoid funny character set dependencies
  19 unexport LC_ALL
  20 LC_COLLATE=C
  21 LC_NUMERIC=C
  22 export LC_COLLATE LC_NUMERIC
  23
  24 # Avoid interference with shell env settings
  25 unexport GREP_OPTIONS
  26
  27 # We are using a recursive build, so we need to do a little thinking
  28 # to get the ordering right.
  29 #
  30 # Most importantly: sub-Makefiles should only ever modify files in
  31 # their own directory. If in some directory we have a dependency on
  32 # a file in another dir (which doesn't happen often, but it's often
  33 # unavoidable when linking the built-in.o targets which finally
  34 # turn into vmlinux), we will call a sub make in that other dir, and
  35 # after that we are sure that everything which is in that other dir
  36 # is now up to date.
  37 #
  38 # The only cases where we need to modify files which have global
  39 # effects are thus separated out and done before the recursive
  40 # descending is started. They are now explicitly listed as the
  41 # prepare rule.
  42
  43 # Beautify output
  44 # ---------------------------------------------------------------------------
  45 #
  46 # Normally, we echo the whole command before executing it. By making
  47 # that echo $($(quiet)$(cmd)), we now have the possibility to set
  48 # $(quiet) to choose other forms of output instead, e.g.
  49 #
  50 #         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
  51 #         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
  52 #
  53 # If $(quiet) is empty, the whole command will be printed.
  54 # If it is set to "quiet_", only the short version will be printed.
  55 # If it is set to "silent_", nothing will be printed at all, since
  56 # the variable $(silent_cmd_cc_o_c) doesn't exist.
  57 #
  58 # A simple variant is to prefix commands with $(Q) - that's useful
  59 # for commands that shall be hidden in non-verbose mode.
  60 #
  61 #       $(Q)ln $@ :<
  62 #
  63 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
  64 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
  65 #
  66 # To put more focus on warnings, be less verbose as default
  67 # Use 'make V=1' to see the full commands
  68
  69 ifeq ("$(origin V)", "command line")
  70   KBUILD_VERBOSE = $(V)
  71 endif
  72 ifndef KBUILD_VERBOSE
  73   KBUILD_VERBOSE = 0
  74 endif
  75
  76 ifeq ($(KBUILD_VERBOSE),1)
  77   quiet =
  78   Q =
  79 else
  80   quiet=quiet_
  81   Q = @
  82 endif
  83
  84 # If the user is running make -s (silent mode), suppress echoing of
  85 # commands
  86
  87 ifneq ($(filter 4.%,$(MAKE_VERSION)),)  # make-4
  88 ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
  89   quiet=silent_
  90   tools_silent=s
  91 endif
  92 else                                    # make-3.8x
  93 ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
  94   quiet=silent_
  95   tools_silent=-s
  96 endif
  97 endif
  98
  99 export quiet Q KBUILD_VERBOSE
 100
 101 # kbuild supports saving output files in a separate directory.
 102 # To locate output files in a separate directory two syntaxes are supported.
 103 # In both cases the working directory must be the root of the kernel src.
 104 # 1) O=
 105 # Use "make O=dir/to/store/output/files/"
 106 #
 107 # 2) Set KBUILD_OUTPUT
 108 # Set the environment variable KBUILD_OUTPUT to point to the directory
 109 # where the output files shall be placed.
 110 # export KBUILD_OUTPUT=dir/to/store/output/files/
 111 # make
 112 #
 113 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
 114 # variable.
 115
 116 # KBUILD_SRC is set on invocation of make in OBJ directory
 117 # KBUILD_SRC is not intended to be used by the regular user (for now)
 118 ifeq ($(KBUILD_SRC),)
 119
 120 # OK, Make called in directory where kernel src resides
 121 # Do we want to locate output files in a separate directory?
 122 ifeq ("$(origin O)", "command line")
 123   KBUILD_OUTPUT := $(O)
 124 endif
 125
 126 # That's our default target when none is given on the command line
 127 PHONY := _all
 128 _all:
 129
 130 # Cancel implicit rules on top Makefile
 131 $(CURDIR)/Makefile Makefile: ;
 132
 133 ifneq ($(words $(subst :, ,$(CURDIR))), 1)
 134   $(error main directory cannot contain spaces nor colons)
 135 endif
 136
 137 ifneq ($(KBUILD_OUTPUT),)
 138 # Invoke a second make in the output directory, passing relevant variables
 139 # check that the output directory actually exists
 140 saved-output := $(KBUILD_OUTPUT)
 141 KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
 142                                                                 && /bin/pwd)
 143 $(if $(KBUILD_OUTPUT),, \
 144      $(error failed to create output directory "$(saved-output)"))
 145
 146 PHONY += $(MAKECMDGOALS) sub-make
 147
 148 $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
 149         @:
 150
 151 sub-make: FORCE
 152         $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
 153         -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
 154
 155 # Leave processing to above invocation of make
 156 skip-makefile := 1
 157 endif # ifneq ($(KBUILD_OUTPUT),)
 158 endif # ifeq ($(KBUILD_SRC),)
 159
 160 # We process the rest of the Makefile if this is the final invocation of make
 161 ifeq ($(skip-makefile),)
 162
 163 # Do not print "Entering directory ...",
 164 # but we want to display it when entering to the output directory
 165 # so that IDEs/editors are able to understand relative filenames.
 166 MAKEFLAGS += --no-print-directory
 167
 168 # Call a source code checker (by default, "sparse") as part of the
 169 # C compilation.
 170 #
 171 # Use 'make C=1' to enable checking of only re-compiled files.
 172 # Use 'make C=2' to enable checking of *all* source files, regardless
 173 # of whether they are re-compiled or not.
 174 #
 175 # See the file "Documentation/sparse.txt" for more details, including
 176 # where to get the "sparse" utility.
 177
 178 ifeq ("$(origin C)", "command line")
 179   KBUILD_CHECKSRC = $(C)
 180 endif
 181 ifndef KBUILD_CHECKSRC
 182   KBUILD_CHECKSRC = 0
 183 endif
 184
 185 # Use make M=dir to specify directory of external module to build
 186 # Old syntax make ... SUBDIRS=$PWD is still supported
 187 # Setting the environment variable KBUILD_EXTMOD take precedence
 188 ifdef SUBDIRS
 189   KBUILD_EXTMOD ?= $(SUBDIRS)
 190 endif
 191
 192 ifeq ("$(origin M)", "command line")
 193   KBUILD_EXTMOD := $(M)
 194 endif
 195
 196 # If building an external module we do not care about the all: rule
 197 # but instead _all depend on modules
 198 PHONY += all
 199 ifeq ($(KBUILD_EXTMOD),)
 200 _all: all
 201 else
 202 _all: modules
 203 endif
 204
 205 ifeq ($(KBUILD_SRC),)
 206         # building in the source tree
 207         srctree := .
 208 else
 209         ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
 210                 # building in a subdirectory of the source tree
 211                 srctree := ..
 212         else
 213                 srctree := $(KBUILD_SRC)
 214         endif
 215 endif
 216 objtree         := .
 217 src             := $(srctree)
 218 obj             := $(objtree)
 219
 220 VPATH           := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 221
 222 export srctree objtree VPATH
 223
 224 # SUBARCH tells the usermode build what the underlying arch is.  That is set
 225 # first, and if a usermode build is happening, the "ARCH=um" on the command
 226 # line overrides the setting of ARCH below.  If a native build is happening,
 227 # then ARCH is assigned, getting whatever value it gets normally, and
 228 # SUBARCH is subsequently ignored.
 229
 230 SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
 231                                   -e s/sun4u/sparc64/ \
 232                                   -e s/arm.*/arm/ -e s/sa110/arm/ \
 233                                   -e s/s390x/s390/ -e s/parisc64/parisc/ \
 234                                   -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
 235                                   -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
 236
 237 # Cross compiling and selecting different set of gcc/bin-utils
 238 # ---------------------------------------------------------------------------
 239 #
 240 # When performing cross compilation for other architectures ARCH shall be set
 241 # to the target architecture. (See arch/* for the possibilities).
 242 # ARCH can be set during invocation of make:
 243 # make ARCH=ia64
 244 # Another way is to have ARCH set in the environment.
 245 # The default ARCH is the host where make is executed.
 246
 247 # CROSS_COMPILE specify the prefix used for all executables used
 248 # during compilation. Only gcc and related bin-utils executables
 249 # are prefixed with $(CROSS_COMPILE).
 250 # CROSS_COMPILE can be set on the command line
 251 # make CROSS_COMPILE=ia64-linux-
 252 # Alternatively CROSS_COMPILE can be set in the environment.
 253 # A third alternative is to store a setting in .config so that plain
 254 # "make" in the configured kernel build directory always uses that.
 255 # Default value for CROSS_COMPILE is not to prefix executables
 256 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
 257 ARCH            ?= $(SUBARCH)
 258 CROSS_COMPILE   ?= $(CONFIG_CROSS_COMPILE:"%"=%)
 259
 260 # Architecture as present in compile.h
 261 UTS_MACHINE     := $(ARCH)
 262 SRCARCH         := $(ARCH)
 263
 264 # Additional ARCH settings for x86
 265 ifeq ($(ARCH),i386)
 266         SRCARCH := x86
 267 endif
 268 ifeq ($(ARCH),x86_64)
 269         SRCARCH := x86
 270 endif
 271
 272 # Additional ARCH settings for sparc
 273 ifeq ($(ARCH),sparc32)
 274        SRCARCH := sparc
 275 endif
 276 ifeq ($(ARCH),sparc64)
 277        SRCARCH := sparc
 278 endif
 279
 280 # Additional ARCH settings for sh
 281 ifeq ($(ARCH),sh64)
 282        SRCARCH := sh
 283 endif
 284
 285 # Additional ARCH settings for tile
 286 ifeq ($(ARCH),tilepro)
 287        SRCARCH := tile
 288 endif
 289 ifeq ($(ARCH),tilegx)
 290        SRCARCH := tile
 291 endif
 292
 293 # Where to locate arch specific headers
 294 hdr-arch  := $(SRCARCH)
 295
 296 KCONFIG_CONFIG  ?= .config
 297 export KCONFIG_CONFIG
 298
 299 # SHELL used by kbuild
 300 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 301           else if [ -x /bin/bash ]; then echo /bin/bash; \
 302           else echo sh; fi ; fi)
 303
 304 HOSTCC       = gcc
 305 HOSTCXX      = g++
 306 HOSTCFLAGS   := -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89
 307 HOSTCXXFLAGS = -O2
 308
 309 # Decide whether to build built-in, modular, or both.
 310 # Normally, just do built-in.
 311
 312 KBUILD_MODULES :=
 313 KBUILD_BUILTIN := 1
 314
 315 # If we have only "make modules", don't compile built-in objects.
 316 # When we're building modules with modversions, we need to consider
 317 # the built-in objects during the descend as well, in order to
 318 # make sure the checksums are up to date before we record them.
 319
 320 ifeq ($(MAKECMDGOALS),modules)
 321   KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
 322 endif
 323
 324 # If we have "make <whatever> modules", compile modules
 325 # in addition to whatever we do anyway.
 326 # Just "make" or "make all" shall build modules as well
 327
 328 ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
 329   KBUILD_MODULES := 1
 330 endif
 331
 332 ifeq ($(MAKECMDGOALS),)
 333   KBUILD_MODULES := 1
 334 endif
 335
 336 export KBUILD_MODULES KBUILD_BUILTIN
 337 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
 338
 339 # We need some generic definitions (do not try to remake the file).
 340 scripts/Kbuild.include: ;
 341 include scripts/Kbuild.include
 342
 343 # Make variables (CC, etc...)
 344 AS              = $(CROSS_COMPILE)as
 345 LD              = $(CROSS_COMPILE)ld
 346 CC              = $(CROSS_COMPILE)gcc
 347 CPP             = $(CC) -E
 348 AR              = $(CROSS_COMPILE)ar
 349 NM              = $(CROSS_COMPILE)nm
 350 STRIP           = $(CROSS_COMPILE)strip
 351 OBJCOPY         = $(CROSS_COMPILE)objcopy
 352 OBJDUMP         = $(CROSS_COMPILE)objdump
 353 AWK             = awk
 354 GENKSYMS        = scripts/genksyms/genksyms
 355 INSTALLKERNEL  := installkernel
 356 DEPMOD          = /sbin/depmod
 357 PERL            = perl
 358 PYTHON          = python
 359 CHECK           = sparse
 360
 361 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
 362                   -Wbitwise -Wno-return-void $(CF)
 363 CFLAGS_MODULE   =
 364 AFLAGS_MODULE   =
 365 LDFLAGS_MODULE  =
 366 CFLAGS_KERNEL   =
 367 AFLAGS_KERNEL   =
 368 CFLAGS_GCOV     = -fprofile-arcs -ftest-coverage -fno-tree-loop-im
 369
 370
 371 # Use USERINCLUDE when you must reference the UAPI directories only.
 372 USERINCLUDE    := \
 373                 -I$(srctree)/arch/$(hdr-arch)/include/uapi \
 374                 -Iarch/$(hdr-arch)/include/generated/uapi \
 375                 -I$(srctree)/include/uapi \
 376                 -Iinclude/generated/uapi \
 377                 -include $(srctree)/include/linux/kconfig.h
 378
 379 # Use LINUXINCLUDE when you must reference the include/ directory.
 380 # Needed to be compatible with the O= option
 381 LINUXINCLUDE    := \
 382                 -I$(srctree)/arch/$(hdr-arch)/include \
 383                 -Iarch/$(hdr-arch)/include/generated/uapi \
 384                 -Iarch/$(hdr-arch)/include/generated \
 385                 $(if $(KBUILD_SRC), -I$(srctree)/include) \
 386                 -Iinclude \
 387                 $(USERINCLUDE)
 388
 389 KBUILD_CPPFLAGS := -D__KERNEL__
 390
 391 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 392                    -fno-strict-aliasing -fno-common \
 393                    -Werror-implicit-function-declaration \
 394                    -Wno-format-security \
 395                    -std=gnu89 $(call cc-option,-fno-PIE)
 396
 397
 398 KBUILD_AFLAGS_KERNEL :=
 399 KBUILD_CFLAGS_KERNEL :=
 400 KBUILD_AFLAGS   := -D__ASSEMBLY__ $(call cc-option,-fno-PIE)
 401 KBUILD_AFLAGS_MODULE  := -DMODULE
 402 KBUILD_CFLAGS_MODULE  := -DMODULE
 403 KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
 404
 405 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
 406 KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
 407 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 408
 409 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 410 export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
 411 export CPP AR NM STRIP OBJCOPY OBJDUMP
 412 export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE
 413 export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
 414
 415 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
 416 export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
 417 export CFLAGS_KASAN CFLAGS_KASAN_NOSANITIZE
 418 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 419 export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
 420 export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
 421 export KBUILD_ARFLAGS
 422
 423 # When compiling out-of-tree modules, put MODVERDIR in the module
 424 # tree rather than in the kernel tree. The kernel tree might
 425 # even be read-only.
 426 export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
 427
 428 # Files to ignore in find ... statements
 429
 430 export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o    \
 431                           -name CVS -o -name .pc -o -name .hg -o -name .git \) \
 432                           -prune -o
 433 export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
 434                          --exclude CVS --exclude .pc --exclude .hg --exclude .git
 435
 436 # ===========================================================================
 437 # Rules shared between *config targets and build targets
 438
 439 # Basic helpers built in scripts/
 440 PHONY += scripts_basic
 441 scripts_basic:
 442         $(Q)$(MAKE) $(build)=scripts/basic
 443         $(Q)rm -f .tmp_quiet_recordmcount
 444
 445 # To avoid any implicit rule to kick in, define an empty command.
 446 scripts/basic/%: scripts_basic ;
 447
 448 PHONY += outputmakefile
 449 # outputmakefile generates a Makefile in the output directory, if using a
 450 # separate output directory. This allows convenient use of make in the
 451 # output directory.
 452 outputmakefile:
 453 ifneq ($(KBUILD_SRC),)
 454         $(Q)ln -fsn $(srctree) source
 455         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
 456             $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
 457 endif
 458
 459 # Support for using generic headers in asm-generic
 460 PHONY += asm-generic
 461 asm-generic:
 462         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
 463                     src=asm obj=arch/$(SRCARCH)/include/generated/asm
 464         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
 465                     src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm
 466
 467 # To make sure we do not include .config for any of the *config targets
 468 # catch them early, and hand them over to scripts/kconfig/Makefile
 469 # It is allowed to specify more targets when calling make, including
 470 # mixing *config targets and build targets.
 471 # For example 'make oldconfig all'.
 472 # Detect when mixed targets is specified, and make a second invocation
 473 # of make so .config is not included in this case either (for *config).
 474
 475 version_h := include/generated/uapi/linux/version.h
 476 old_version_h := include/linux/version.h
 477
 478 no-dot-config-targets := clean mrproper distclean \
 479                          cscope gtags TAGS tags help% %docs check% coccicheck \
 480                          $(version_h) headers_% archheaders archscripts \
 481                          kernelversion %src-pkg
 482
 483 config-targets := 0
 484 mixed-targets  := 0
 485 dot-config     := 1
 486
 487 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
 488         ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
 489                 dot-config := 0
 490         endif
 491 endif
 492
 493 ifeq ($(KBUILD_EXTMOD),)
 494         ifneq ($(filter config %config,$(MAKECMDGOALS)),)
 495                 config-targets := 1
 496                 ifneq ($(words $(MAKECMDGOALS)),1)
 497                         mixed-targets := 1
 498                 endif
 499         endif
 500 endif
 501 # install and module_install need also be processed one by one
 502 ifneq ($(filter install,$(MAKECMDGOALS)),)
 503         ifneq ($(filter modules_install,$(MAKECMDGOALS)),)
 504                 mixed-targets := 1
 505         endif
 506 endif
 507
 508 ifeq ($(mixed-targets),1)
 509 # ===========================================================================
 510 # We're called with mixed targets (*config and build targets).
 511 # Handle them one by one.
 512
 513 PHONY += $(MAKECMDGOALS) __build_one_by_one
 514
 515 $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
 516         @:
 517
 518 __build_one_by_one:
 519         $(Q)set -e; \
 520         for i in $(MAKECMDGOALS); do \
 521                 $(MAKE) -f $(srctree)/Makefile $$i; \
 522         done
 523
 524 else
 525 ifeq ($(config-targets),1)
 526 # ===========================================================================
 527 # *config targets only - make sure prerequisites are updated, and descend
 528 # in scripts/kconfig to make the *config target
 529
 530 # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
 531 # KBUILD_DEFCONFIG may point out an alternative default configuration
 532 # used for 'make defconfig'
 533 include arch/$(SRCARCH)/Makefile
 534 export KBUILD_DEFCONFIG KBUILD_KCONFIG
 535
 536 config: scripts_basic outputmakefile FORCE
 537         $(Q)$(MAKE) $(build)=scripts/kconfig $@
 538
 539 %config: scripts_basic outputmakefile FORCE
 540         $(Q)$(MAKE) $(build)=scripts/kconfig $@
 541
 542 else
 543 # ===========================================================================
 544 # Build targets only - this includes vmlinux, arch specific targets, clean
 545 # targets and others. In general all targets except *config targets.
 546
 547 ifeq ($(KBUILD_EXTMOD),)
 548 # Additional helpers built in scripts/
 549 # Carefully list dependencies so we do not try to build scripts twice
 550 # in parallel
 551 PHONY += scripts
 552 scripts: scripts_basic include/config/auto.conf include/config/tristate.conf \
 553          asm-generic
 554         $(Q)$(MAKE) $(build)=$(@)
 555
 556 # Objects we will link into vmlinux / subdirs we need to visit
 557 init-y          := init/
 558 drivers-y       := drivers/ sound/ firmware/
 559 net-y           := net/
 560 libs-y          := lib/
 561 core-y          := usr/
 562 virt-y          := virt/
 563 endif # KBUILD_EXTMOD
 564
 565 ifeq ($(dot-config),1)
 566 # Read in config
 567 -include include/config/auto.conf
 568
 569 ifeq ($(KBUILD_EXTMOD),)
 570 # Read in dependencies to all Kconfig* files, make sure to run
 571 # oldconfig if changes are detected.
 572 -include include/config/auto.conf.cmd
 573
 574 # To avoid any implicit rule to kick in, define an empty command
 575 $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
 576
 577 # If .config is newer than include/config/auto.conf, someone tinkered
 578 # with it and forgot to run make oldconfig.
 579 # if auto.conf.cmd is missing then we are probably in a cleaned tree so
 580 # we execute the config step to be sure to catch updated Kconfig files
 581 include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
 582         $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 583 else
 584 # external modules needs include/generated/autoconf.h and include/config/auto.conf
 585 # but do not care if they are up-to-date. Use auto.conf to trigger the test
 586 PHONY += include/config/auto.conf
 587
 588 include/config/auto.conf:
 589         $(Q)test -e include/generated/autoconf.h -a -e $@ || (          \
 590         echo >&2;                                                       \
 591         echo >&2 "  ERROR: Kernel configuration is invalid.";           \
 592         echo >&2 "         include/generated/autoconf.h or $@ are missing.";\
 593         echo >&2 "         Run 'make oldconfig && make prepare' on kernel src to fix it.";      \
 594         echo >&2 ;                                                      \
 595         /bin/false)
 596
 597 endif # KBUILD_EXTMOD
 598
 599 else
 600 # Dummy target needed, because used as prerequisite
 601 include/config/auto.conf: ;
 602 endif # $(dot-config)
 603
 604 # The all: target is the default when no target is given on the
 605 # command line.
 606 # This allow a user to issue only 'make' to build a kernel including modules
 607 # Defaults to vmlinux, but the arch makefile usually adds further targets
 608 all: vmlinux
 609
 610 ifeq ($(cc-name),clang)
 611 ifneq ($(CROSS_COMPILE),)
 612 CLANG_TARGET    := --target=$(notdir $(CROSS_COMPILE:%-=%))
 613 GCC_TOOLCHAIN_DIR := $(dir $(shell which $(LD)))
 614 CLANG_PREFIX    := --prefix=$(GCC_TOOLCHAIN_DIR)
 615 GCC_TOOLCHAIN   := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
 616 endif
 617 ifneq ($(GCC_TOOLCHAIN),)
 618 CLANG_GCC_TC    := --gcc-toolchain=$(GCC_TOOLCHAIN)
 619 endif
 620 KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
 621 KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
 622 KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
 623 KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
 624 endif
 625
 626 # The arch Makefile can set ARCH_{CPP,A,C}FLAGS to override the default
 627 # values of the respective KBUILD_* variables
 628 ARCH_CPPFLAGS :=
 629 ARCH_AFLAGS :=
 630 ARCH_CFLAGS :=
 631 include arch/$(SRCARCH)/Makefile
 632
 633 KBUILD_CFLAGS   += $(call cc-option,-fno-delete-null-pointer-checks,)
 634 KBUILD_CFLAGS   += $(call cc-disable-warning,maybe-uninitialized,)
 635 KBUILD_CFLAGS   += $(call cc-disable-warning,frame-address,)
 636 KBUILD_CFLAGS   += $(call cc-disable-warning, format-truncation)
 637 KBUILD_CFLAGS   += $(call cc-disable-warning, format-overflow)
 638 KBUILD_CFLAGS   += $(call cc-disable-warning, int-in-bool-context)
 639 KBUILD_CFLAGS   += $(call cc-disable-warning, attribute-alias)
 640
 641 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 642 KBUILD_CFLAGS   += $(call cc-option,-Oz,-Os)
 643 else
 644 ifdef CONFIG_PROFILE_ALL_BRANCHES
 645 KBUILD_CFLAGS   += -O2
 646 else
 647 KBUILD_CFLAGS   += -O2
 648 endif
 649 endif
 650
 651 # Tell gcc to never replace conditional load with a non-conditional one
 652 KBUILD_CFLAGS   += $(call cc-option,--param=allow-store-data-races=0)
 653
 654 # check for 'asm goto'
 655 ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y)
 656         KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
 657         KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO
 658 endif
 659
 660 ifdef CONFIG_READABLE_ASM
 661 # Disable optimizations that make assembler listings hard to read.
 662 # reorder blocks reorders the control in the function
 663 # ipa clone creates specialized cloned functions
 664 # partial inlining inlines only parts of functions
 665 KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \
 666                  $(call cc-option,-fno-ipa-cp-clone,) \
 667                  $(call cc-option,-fno-partial-inlining)
 668 endif
 669
 670 ifneq ($(CONFIG_FRAME_WARN),0)
 671 KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
 672 endif
 673
 674 # Handle stack protector mode.
 675 #
 676 # Since kbuild can potentially perform two passes (first with the old
 677 # .config values and then with updated .config values), we cannot error out
 678 # if a desired compiler option is unsupported. If we were to error, kbuild
 679 # could never get to the second pass and actually notice that we changed
 680 # the option to something that was supported.
 681 #
 682 # Additionally, we don't want to fallback and/or silently change which compiler
 683 # flags will be used, since that leads to producing kernels with different
 684 # security feature characteristics depending on the compiler used. ("But I
 685 # selected CC_STACKPROTECTOR_STRONG! Why did it build with _REGULAR?!")
 686 #
 687 # The middle ground is to warn here so that the failed option is obvious, but
 688 # to let the build fail with bad compiler flags so that we can't produce a
 689 # kernel when there is a CONFIG and compiler mismatch.
 690 #
 691 ifdef CONFIG_CC_STACKPROTECTOR_REGULAR
 692   stackp-flag := -fstack-protector
 693   ifeq ($(call cc-option, $(stackp-flag)),)
 694     $(warning Cannot use CONFIG_CC_STACKPROTECTOR_REGULAR: \
 695              -fstack-protector not supported by compiler)
 696   endif
 697 else
 698 ifdef CONFIG_CC_STACKPROTECTOR_STRONG
 699   stackp-flag := -fstack-protector-strong
 700   ifeq ($(call cc-option, $(stackp-flag)),)
 701     $(warning Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: \
 702               -fstack-protector-strong not supported by compiler)
 703   endif
 704 else
 705   # Force off for distro compilers that enable stack protector by default.
 706   stackp-flag := $(call cc-option, -fno-stack-protector)
 707 endif
 708 endif
 709 KBUILD_CFLAGS += $(stackp-flag)
 710
 711 ifeq ($(cc-name),clang)
 712 KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
 713 KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
 714 KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
 715 KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
 716 # Quiet clang warning: comparison of unsigned expression < 0 is always false
 717 KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
 718 # CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
 719 # source of a reference will be _MergedGlobals and not on of the whitelisted names.
 720 # See modpost pattern 2
 721 KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
 722 KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
 723 else
 724
 725 # These warnings generated too much noise in a regular build.
 726 # Use make W=1 to enable them (see scripts/Makefile.extrawarn)
 727 KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
 728 endif
 729
 730 KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
 731 ifdef CONFIG_FRAME_POINTER
 732 KBUILD_CFLAGS   += -fno-omit-frame-pointer -fno-optimize-sibling-calls
 733 else
 734 # Some targets (ARM with Thumb2, for example), can't be built with frame
 735 # pointers.  For those, we don't have FUNCTION_TRACER automatically
 736 # select FRAME_POINTER.  However, FUNCTION_TRACER adds -pg, and this is
 737 # incompatible with -fomit-frame-pointer with current GCC, so we don't use
 738 # -fomit-frame-pointer with FUNCTION_TRACER.
 739 ifndef CONFIG_FUNCTION_TRACER
 740 KBUILD_CFLAGS   += -fomit-frame-pointer
 741 endif
 742 endif
 743
 744 KBUILD_CFLAGS   += $(call cc-option, -fno-var-tracking-assignments)
 745
 746 ifdef CONFIG_DEBUG_INFO
 747 ifdef CONFIG_DEBUG_INFO_SPLIT
 748 KBUILD_CFLAGS   += $(call cc-option, -gsplit-dwarf, -g)
 749 else
 750 KBUILD_CFLAGS   += -g
 751 endif
 752 KBUILD_AFLAGS   += -Wa,-gdwarf-2
 753 endif
 754 ifdef CONFIG_DEBUG_INFO_DWARF4
 755 KBUILD_CFLAGS   += $(call cc-option, -gdwarf-4,)
 756 endif
 757
 758 ifdef CONFIG_DEBUG_INFO_REDUCED
 759 KBUILD_CFLAGS   += $(call cc-option, -femit-struct-debug-baseonly) \
 760                    $(call cc-option,-fno-var-tracking)
 761 endif
 762
 763 ifdef CONFIG_FUNCTION_TRACER
 764 ifndef CC_FLAGS_FTRACE
 765 CC_FLAGS_FTRACE := -pg
 766 endif
 767 export CC_FLAGS_FTRACE
 768 ifdef CONFIG_HAVE_FENTRY
 769 CC_USING_FENTRY := $(call cc-option, -mfentry -DCC_USING_FENTRY)
 770 endif
 771 KBUILD_CFLAGS   += $(CC_FLAGS_FTRACE) $(CC_USING_FENTRY)
 772 KBUILD_AFLAGS   += $(CC_USING_FENTRY)
 773 ifdef CONFIG_DYNAMIC_FTRACE
 774         ifdef CONFIG_HAVE_C_RECORDMCOUNT
 775                 BUILD_C_RECORDMCOUNT := y
 776                 export BUILD_C_RECORDMCOUNT
 777         endif
 778 endif
 779 endif
 780
 781 # We trigger additional mismatches with less inlining
 782 ifdef CONFIG_DEBUG_SECTION_MISMATCH
 783 KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
 784 endif
 785
 786 # arch Makefile may override CC so keep this after arch Makefile is included
 787 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
 788 CHECKFLAGS     += $(NOSTDINC_FLAGS)
 789
 790 # warn about C99 declaration after statement
 791 KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 792
 793 # disable pointer signed / unsigned warnings in gcc 4.0
 794 KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
 795
 796 # disable stringop warnings in gcc 8+
 797 KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
 798
 799 # disable invalid "can't wrap" optimizations for signed / pointers
 800 KBUILD_CFLAGS   += $(call cc-option,-fno-strict-overflow)
 801
 802 # clang sets -fmerge-all-constants by default as optimization, but this
 803 # is non-conforming behavior for C and in fact breaks the kernel, so we
 804 # need to disable it here generally.
 805 KBUILD_CFLAGS   += $(call cc-option,-fno-merge-all-constants)
 806
 807 # for gcc -fno-merge-all-constants disables everything, but it is fine
 808 # to have actual conforming behavior enabled.
 809 KBUILD_CFLAGS   += $(call cc-option,-fmerge-constants)
 810
 811 # Make sure -fstack-check isn't enabled (like gentoo apparently did)
 812 KBUILD_CFLAGS  += $(call cc-option,-fno-stack-check,)
 813
 814 # conserve stack if available
 815 KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
 816
 817 # disallow errors like 'EXPORT_GPL(foo);' with missing header
 818 KBUILD_CFLAGS   += $(call cc-option,-Werror=implicit-int)
 819
 820 # require functions to have arguments in prototypes, not empty 'int foo()'
 821 KBUILD_CFLAGS   += $(call cc-option,-Werror=strict-prototypes)
 822
 823 # Prohibit date/time macros, which would make the build non-deterministic
 824 KBUILD_CFLAGS   += $(call cc-option,-Werror=date-time)
 825
 826 # use the deterministic mode of AR if available
 827 KBUILD_ARFLAGS := $(call ar-option,D)
 828
 829 include scripts/Makefile.kasan
 830 include scripts/Makefile.extrawarn
 831
 832 # Add any arch overrides and user supplied CPPFLAGS, AFLAGS and CFLAGS as the
 833 # last assignments
 834 KBUILD_CPPFLAGS += $(ARCH_CPPFLAGS) $(KCPPFLAGS)
 835 KBUILD_AFLAGS   += $(ARCH_AFLAGS)   $(KAFLAGS)
 836 KBUILD_CFLAGS   += $(ARCH_CFLAGS)   $(KCFLAGS)
 837
 838 # Use --build-id when available.
 839 LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
 840                               $(call cc-ldoption, -Wl$(comma)--build-id,))
 841 KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
 842 LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
 843
 844 ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
 845 LDFLAGS_vmlinux += $(call ld-option, -X,)
 846 endif
 847
 848 # Default kernel image to build when no specific target is given.
 849 # KBUILD_IMAGE may be overruled on the command line or
 850 # set in the environment
 851 # Also any assignments in arch/$(ARCH)/Makefile take precedence over
 852 # this default value
 853 export KBUILD_IMAGE ?= vmlinux
 854
 855 #
 856 # INSTALL_PATH specifies where to place the updated kernel and system map
 857 # images. Default is /boot, but you can set it to other values
 858 export  INSTALL_PATH ?= /boot
 859
 860 #
 861 # INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots.
 862 # Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as
 863 # an argument if needed. Otherwise it defaults to the kernel install path
 864 #
 865 export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE)
 866
 867 #
 868 # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
 869 # relocations required by build roots.  This is not defined in the
 870 # makefile but the argument can be passed to make if needed.
 871 #
 872
 873 MODLIB  = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
 874 export MODLIB
 875
 876 #
 877 # INSTALL_MOD_STRIP, if defined, will cause modules to be
 878 # stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
 879 # the default option --strip-debug will be used.  Otherwise,
 880 # INSTALL_MOD_STRIP value will be used as the options to the strip command.
 881
 882 ifdef INSTALL_MOD_STRIP
 883 ifeq ($(INSTALL_MOD_STRIP),1)
 884 mod_strip_cmd = $(STRIP) --strip-debug
 885 else
 886 mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
 887 endif # INSTALL_MOD_STRIP=1
 888 else
 889 mod_strip_cmd = true
 890 endif # INSTALL_MOD_STRIP
 891 export mod_strip_cmd
 892
 893 # CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed
 894 # after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP
 895 # or CONFIG_MODULE_COMPRESS_XZ.
 896
 897 mod_compress_cmd = true
 898 ifdef CONFIG_MODULE_COMPRESS
 899   ifdef CONFIG_MODULE_COMPRESS_GZIP
 900     mod_compress_cmd = gzip -n -f
 901   endif # CONFIG_MODULE_COMPRESS_GZIP
 902   ifdef CONFIG_MODULE_COMPRESS_XZ
 903     mod_compress_cmd = xz -f
 904   endif # CONFIG_MODULE_COMPRESS_XZ
 905 endif # CONFIG_MODULE_COMPRESS
 906 export mod_compress_cmd
 907
 908 # Select initial ramdisk compression format, default is gzip(1).
 909 # This shall be used by the dracut(8) tool while creating an initramfs image.
 910 #
 911 INITRD_COMPRESS-y                  := gzip
 912 INITRD_COMPRESS-$(CONFIG_RD_BZIP2) := bzip2
 913 INITRD_COMPRESS-$(CONFIG_RD_LZMA)  := lzma
 914 INITRD_COMPRESS-$(CONFIG_RD_XZ)    := xz
 915 INITRD_COMPRESS-$(CONFIG_RD_LZO)   := lzo
 916 INITRD_COMPRESS-$(CONFIG_RD_LZ4)   := lz4
 917 # do not export INITRD_COMPRESS, since we didn't actually
 918 # choose a sane default compression above.
 919 # export INITRD_COMPRESS := $(INITRD_COMPRESS-y)
 920
 921 ifdef CONFIG_MODULE_SIG_ALL
 922 $(eval $(call config_filename,MODULE_SIG_KEY))
 923
 924 mod_sign_cmd = scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODULE_SIG_KEY_SRCPREFIX)$(CONFIG_MODULE_SIG_KEY) certs/signing_key.x509
 925 else
 926 mod_sign_cmd = true
 927 endif
 928 export mod_sign_cmd
 929
 930
 931 ifeq ($(KBUILD_EXTMOD),)
 932 core-y          += kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
 933
 934 vmlinux-dirs    := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
 935                      $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
 936                      $(net-y) $(net-m) $(libs-y) $(libs-m) $(virt-y)))
 937
 938 vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
 939                      $(init-) $(core-) $(drivers-) $(net-) $(libs-) $(virt-))))
 940
 941 init-y          := $(patsubst %/, %/built-in.o, $(init-y))
 942 core-y          := $(patsubst %/, %/built-in.o, $(core-y))
 943 drivers-y       := $(patsubst %/, %/built-in.o, $(drivers-y))
 944 net-y           := $(patsubst %/, %/built-in.o, $(net-y))
 945 libs-y1         := $(patsubst %/, %/lib.a, $(libs-y))
 946 libs-y2         := $(patsubst %/, %/built-in.o, $(libs-y))
 947 libs-y          := $(libs-y1) $(libs-y2)
 948 virt-y          := $(patsubst %/, %/built-in.o, $(virt-y))
 949
 950 # Externally visible symbols (used by link-vmlinux.sh)
 951 export KBUILD_VMLINUX_INIT := $(head-y) $(init-y)
 952 export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y) $(virt-y)
 953 export KBUILD_LDS          := arch/$(SRCARCH)/kernel/vmlinux.lds
 954 export LDFLAGS_vmlinux
 955 # used by scripts/pacmage/Makefile
 956 export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) arch Documentation include samples scripts tools)
 957
 958 vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_INIT) $(KBUILD_VMLINUX_MAIN)
 959
 960 # Final link of vmlinux
 961       cmd_link-vmlinux = $(CONFIG_SHELL) $< $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux)
 962 quiet_cmd_link-vmlinux = LINK    $@
 963
 964 # Include targets which we want to
 965 # execute if the rest of the kernel build went well.
 966 vmlinux: scripts/link-vmlinux.sh $(vmlinux-deps) FORCE
 967 ifdef CONFIG_HEADERS_CHECK
 968         $(Q)$(MAKE) -f $(srctree)/Makefile headers_check
 969 endif
 970 ifdef CONFIG_SAMPLES
 971         $(Q)$(MAKE) $(build)=samples
 972 endif
 973 ifdef CONFIG_BUILD_DOCSRC
 974         $(Q)$(MAKE) $(build)=Documentation
 975 endif
 976 ifdef CONFIG_GDB_SCRIPTS
 977         $(Q)ln -fsn `cd $(srctree) && /bin/pwd`/scripts/gdb/vmlinux-gdb.py
 978 endif
 979         +$(call if_changed,link-vmlinux)
 980
 981 # The actual objects are generated when descending,
 982 # make sure no implicit rule kicks in
 983 $(sort $(vmlinux-deps)): $(vmlinux-dirs) ;
 984
 985 # Handle descending into subdirectories listed in $(vmlinux-dirs)
 986 # Preset locale variables to speed up the build process. Limit locale
 987 # tweaks to this spot to avoid wrong language settings when running
 988 # make menuconfig etc.
 989 # Error messages still appears in the original language
 990
 991 PHONY += $(vmlinux-dirs)
 992 $(vmlinux-dirs): prepare scripts
 993         $(Q)$(MAKE) $(build)=$@
 994
 995 define filechk_kernel.release
 996         echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
 997 endef
 998
 999 # Store (new) KERNELRELEASE string in include/config/kernel.release
1000 include/config/kernel.release: include/config/auto.conf FORCE
1001         $(call filechk,kernel.release)
1002
1003
1004 # Things we need to do before we recursively start building the kernel
1005 # or the modules are listed in "prepare".
1006 # A multi level approach is used. prepareN is processed before prepareN-1.
1007 # archprepare is used in arch Makefiles and when processed asm symlink,
1008 # version.h and scripts_basic is processed / created.
1009
1010 # Listed in dependency order
1011 PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
1012
1013 # prepare3 is used to check if we are building in a separate output directory,
1014 # and if so do:
1015 # 1) Check that make has not been executed in the kernel src $(srctree)
1016 prepare3: include/config/kernel.release
1017 ifneq ($(KBUILD_SRC),)
1018         @$(kecho) '  Using $(srctree) as source for kernel'
1019         $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
1020                 echo >&2 "  $(srctree) is not clean, please run 'make mrproper'"; \
1021                 echo >&2 "  in the '$(srctree)' directory.";\
1022                 /bin/false; \
1023         fi;
1024 endif
1025
1026 # prepare2 creates a makefile if using a separate output directory
1027 prepare2: prepare3 outputmakefile asm-generic
1028
1029 prepare1: prepare2 $(version_h) include/generated/utsrelease.h \
1030                    include/config/auto.conf
1031         $(cmd_crmodverdir)
1032
1033 archprepare: archheaders archscripts prepare1 scripts_basic
1034
1035 prepare0: archprepare FORCE
1036         $(Q)$(MAKE) $(build)=.
1037
1038 # All the preparing..
1039 prepare: prepare0
1040
1041 # Generate some files
1042 # ---------------------------------------------------------------------------
1043
1044 # KERNELRELEASE can change from a few different places, meaning version.h
1045 # needs to be updated, so this check is forced on all builds
1046
1047 uts_len := 64
1048 define filechk_utsrelease.h
1049         if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
1050           echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2;    \
1051           exit 1;                                                         \
1052         fi;                                                               \
1053         (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
1054 endef
1055
1056 define filechk_version.h
1057         (echo \#define LINUX_VERSION_CODE $(shell                         \
1058         expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
1059         echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
1060 endef
1061
1062 $(version_h): $(srctree)/Makefile FORCE
1063         $(call filechk,version.h)
1064         $(Q)rm -f $(old_version_h)
1065
1066 include/generated/utsrelease.h: include/config/kernel.release FORCE
1067         $(call filechk,utsrelease.h)
1068
1069 PHONY += headerdep
1070 headerdep:
1071         $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
1072         $(srctree)/scripts/headerdep.pl -I$(srctree)/include
1073
1074 # ---------------------------------------------------------------------------
1075 # Firmware install
1076 INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
1077 export INSTALL_FW_PATH
1078
1079 PHONY += firmware_install
1080 firmware_install: FORCE
1081         @mkdir -p $(objtree)/firmware
1082         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install
1083
1084 # ---------------------------------------------------------------------------
1085 # Kernel headers
1086
1087 #Default location for installed headers
1088 export INSTALL_HDR_PATH = $(objtree)/usr
1089
1090 # If we do an all arch process set dst to asm-$(hdr-arch)
1091 hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
1092
1093 PHONY += archheaders
1094 archheaders:
1095
1096 PHONY += archscripts
1097 archscripts:
1098
1099 PHONY += __headers
1100 __headers: $(version_h) scripts_basic asm-generic archheaders archscripts FORCE
1101         $(Q)$(MAKE) $(build)=scripts build_unifdef
1102
1103 PHONY += headers_install_all
1104 headers_install_all:
1105         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
1106
1107 PHONY += headers_install
1108 headers_install: __headers
1109         $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \
1110           $(error Headers not exportable for the $(SRCARCH) architecture))
1111         $(Q)$(MAKE) $(hdr-inst)=include/uapi
1112         $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst)
1113
1114 PHONY += headers_check_all
1115 headers_check_all: headers_install_all
1116         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
1117
1118 PHONY += headers_check
1119 headers_check: headers_install
1120         $(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1
1121         $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1
1122
1123 # ---------------------------------------------------------------------------
1124 # Kernel selftest
1125
1126 PHONY += kselftest
1127 kselftest:
1128         $(Q)$(MAKE) -C tools/testing/selftests run_tests
1129
1130 kselftest-clean:
1131         $(Q)$(MAKE) -C tools/testing/selftests clean
1132
1133 # ---------------------------------------------------------------------------
1134 # Modules
1135
1136 ifdef CONFIG_MODULES
1137
1138 # By default, build modules as well
1139
1140 all: modules
1141
1142 # Build modules
1143 #
1144 # A module can be listed more than once in obj-m resulting in
1145 # duplicate lines in modules.order files.  Those are removed
1146 # using awk while concatenating to the final file.
1147
1148 PHONY += modules
1149 modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
1150         $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
1151         @$(kecho) '  Building modules, stage 2.';
1152         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1153         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
1154
1155 modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
1156         $(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
1157
1158 %/modules.builtin: include/config/auto.conf
1159         $(Q)$(MAKE) $(modbuiltin)=$*
1160
1161
1162 # Target to prepare building external modules
1163 PHONY += modules_prepare
1164 modules_prepare: prepare scripts
1165
1166 # Target to install modules
1167 PHONY += modules_install
1168 modules_install: _modinst_ _modinst_post
1169
1170 PHONY += _modinst_
1171 _modinst_:
1172         @rm -rf $(MODLIB)/kernel
1173         @rm -f $(MODLIB)/source
1174         @mkdir -p $(MODLIB)/kernel
1175         @ln -s `cd $(srctree) && /bin/pwd` $(MODLIB)/source
1176         @if [ ! $(objtree) -ef  $(MODLIB)/build ]; then \
1177                 rm -f $(MODLIB)/build ; \
1178                 ln -s $(CURDIR) $(MODLIB)/build ; \
1179         fi
1180         @cp -f $(objtree)/modules.order $(MODLIB)/
1181         @cp -f $(objtree)/modules.builtin $(MODLIB)/
1182         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1183
1184 # This depmod is only for convenience to give the initial
1185 # boot a modules.dep even before / is mounted read-write.  However the
1186 # boot script depmod is the master version.
1187 PHONY += _modinst_post
1188 _modinst_post: _modinst_
1189         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
1190         $(call cmd,depmod)
1191
1192 ifeq ($(CONFIG_MODULE_SIG), y)
1193 PHONY += modules_sign
1194 modules_sign:
1195         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modsign
1196 endif
1197
1198 else # CONFIG_MODULES
1199
1200 # Modules not configured
1201 # ---------------------------------------------------------------------------
1202
1203 modules modules_install: FORCE
1204         @echo >&2
1205         @echo >&2 "The present kernel configuration has modules disabled."
1206         @echo >&2 "Type 'make config' and enable loadable module support."
1207         @echo >&2 "Then build a kernel with module support enabled."
1208         @echo >&2
1209         @exit 1
1210
1211 endif # CONFIG_MODULES
1212
1213 ###
1214 # Cleaning is done on three levels.
1215 # make clean     Delete most generated files
1216 #                Leave enough to build external modules
1217 # make mrproper  Delete the current configuration, and all generated files
1218 # make distclean Remove editor backup files, patch leftover files and the like
1219
1220 # Directories & files removed with 'make clean'
1221 CLEAN_DIRS  += $(MODVERDIR)
1222
1223 # Directories & files removed with 'make mrproper'
1224 MRPROPER_DIRS  += include/config usr/include include/generated          \
1225                   arch/*/include/generated .tmp_objdiff
1226 MRPROPER_FILES += .config .config.old .version .old_version \
1227                   Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
1228                   signing_key.pem signing_key.priv signing_key.x509     \
1229                   x509.genkey extra_certificates signing_key.x509.keyid \
1230                   signing_key.x509.signer vmlinux-gdb.py
1231
1232 # clean - Delete most, but leave enough to build external modules
1233 #
1234 clean: rm-dirs  := $(CLEAN_DIRS)
1235 clean: rm-files := $(CLEAN_FILES)
1236 clean-dirs      := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation samples)
1237
1238 PHONY += $(clean-dirs) clean archclean vmlinuxclean
1239 $(clean-dirs):
1240         $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1241
1242 vmlinuxclean:
1243         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
1244
1245 clean: archclean vmlinuxclean
1246
1247 # mrproper - Delete all generated files, including .config
1248 #
1249 mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
1250 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1251 mrproper-dirs      := $(addprefix _mrproper_,Documentation/DocBook scripts)
1252
1253 PHONY += $(mrproper-dirs) mrproper archmrproper
1254 $(mrproper-dirs):
1255         $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1256
1257 mrproper: clean archmrproper $(mrproper-dirs)
1258         $(call cmd,rmdirs)
1259         $(call cmd,rmfiles)
1260
1261 # distclean
1262 #
1263 PHONY += distclean
1264
1265 distclean: mrproper
1266         @find $(srctree) $(RCS_FIND_IGNORE) \
1267                 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1268                 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1269                 -o -name '.*.rej' -o -name '*%'  -o -name 'core' \) \
1270                 -type f -print | xargs rm -f
1271
1272
1273 # Packaging of the kernel to various formats
1274 # ---------------------------------------------------------------------------
1275 # rpm target kept for backward compatibility
1276 package-dir     := scripts/package
1277
1278 %src-pkg: FORCE
1279         $(Q)$(MAKE) $(build)=$(package-dir) $@
1280 %pkg: include/config/kernel.release FORCE
1281         $(Q)$(MAKE) $(build)=$(package-dir) $@
1282 rpm: include/config/kernel.release FORCE
1283         $(Q)$(MAKE) $(build)=$(package-dir) $@
1284
1285
1286 # Brief documentation of the typical targets used
1287 # ---------------------------------------------------------------------------
1288
1289 boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
1290 boards := $(sort $(notdir $(boards)))
1291 board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
1292 board-dirs := $(sort $(notdir $(board-dirs:/=)))
1293
1294 help:
1295         @echo  'Cleaning targets:'
1296         @echo  '  clean           - Remove most generated files but keep the config and'
1297         @echo  '                    enough build support to build external modules'
1298         @echo  '  mrproper        - Remove all generated files + config + various backup files'
1299         @echo  '  distclean       - mrproper + remove editor backup and patch files'
1300         @echo  ''
1301         @echo  'Configuration targets:'
1302         @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1303         @echo  ''
1304         @echo  'Other generic targets:'
1305         @echo  '  all             - Build all targets marked with [*]'
1306         @echo  '* vmlinux         - Build the bare kernel'
1307         @echo  '* modules         - Build all modules'
1308         @echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
1309         @echo  '  firmware_install- Install all firmware to INSTALL_FW_PATH'
1310         @echo  '                    (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
1311         @echo  '  dir/            - Build all files in dir and below'
1312         @echo  '  dir/file.[ois]  - Build specified target only'
1313         @echo  '  dir/file.ll     - Build the LLVM assembly file'
1314         @echo  '                    (requires compiler support for LLVM assembly generation)'
1315         @echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
1316         @echo  '                    (requires a recent binutils and recent build (System.map))'
1317         @echo  '  dir/file.ko     - Build module including final link'
1318         @echo  '  modules_prepare - Set up for building external modules'
1319         @echo  '  tags/TAGS       - Generate tags file for editors'
1320         @echo  '  cscope          - Generate cscope index'
1321         @echo  '  gtags           - Generate GNU GLOBAL index'
1322         @echo  '  kernelrelease   - Output the release version string (use with make -s)'
1323         @echo  '  kernelversion   - Output the version stored in Makefile (use with make -s)'
1324         @echo  '  image_name      - Output the image name (use with make -s)'
1325         @echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
1326          echo  '                    (default: $(INSTALL_HDR_PATH))'; \
1327          echo  ''
1328         @echo  'Static analysers'
1329         @echo  '  checkstack      - Generate a list of stack hogs'
1330         @echo  '  namespacecheck  - Name space analysis on compiled kernel'
1331         @echo  '  versioncheck    - Sanity check on version.h usage'
1332         @echo  '  includecheck    - Check for duplicate included header files'
1333         @echo  '  export_report   - List the usages of all exported symbols'
1334         @echo  '  headers_check   - Sanity check on exported headers'
1335         @echo  '  headerdep       - Detect inclusion cycles in headers'
1336         @$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
1337         @echo  ''
1338         @echo  'Kernel selftest'
1339         @echo  '  kselftest       - Build and run kernel selftest (run as root)'
1340         @echo  '                    Build, install, and boot kernel before'
1341         @echo  '                    running kselftest on it'
1342         @echo  '  kselftest-clean - Remove all generated kselftest files'
1343         @echo  ''
1344         @echo  'Kernel packaging:'
1345         @$(MAKE) $(build)=$(package-dir) help
1346         @echo  ''
1347         @echo  'Documentation targets:'
1348         @$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
1349         @echo  ''
1350         @echo  'Architecture specific targets ($(SRCARCH)):'
1351         @$(if $(archhelp),$(archhelp),\
1352                 echo '  No architecture specific help defined for $(SRCARCH)')
1353         @echo  ''
1354         @$(if $(boards), \
1355                 $(foreach b, $(boards), \
1356                 printf "  %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
1357                 echo '')
1358         @$(if $(board-dirs), \
1359                 $(foreach b, $(board-dirs), \
1360                 printf "  %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
1361                 printf "  %-16s - Show all of the above\\n" help-boards; \
1362                 echo '')
1363
1364         @echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1365         @echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
1366         @echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
1367         @echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
1368         @echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
1369         @echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1370         @echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
1371         @echo  '                1: warnings which may be relevant and do not occur too often'
1372         @echo  '                2: warnings which occur quite often but may still be relevant'
1373         @echo  '                3: more obscure warnings, can most likely be ignored'
1374         @echo  '                Multiple levels can be combined with W=12 or W=123'
1375         @echo  ''
1376         @echo  'Execute "make" or "make all" to build all targets marked with [*] '
1377         @echo  'For further info see the ./README file'
1378
1379
1380 help-board-dirs := $(addprefix help-,$(board-dirs))
1381
1382 help-boards: $(help-board-dirs)
1383
1384 boards-per-dir = $(sort $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig)))
1385
1386 $(help-board-dirs): help-%:
1387         @echo  'Architecture specific targets ($(SRCARCH) $*):'
1388         @$(if $(boards-per-dir), \
1389                 $(foreach b, $(boards-per-dir), \
1390                 printf "  %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
1391                 echo '')
1392
1393
1394 # Documentation targets
1395 # ---------------------------------------------------------------------------
1396 %docs: scripts_basic FORCE
1397         $(Q)$(MAKE) $(build)=scripts build_docproc build_check-lc_ctype
1398         $(Q)$(MAKE) $(build)=Documentation/DocBook $@
1399
1400 else # KBUILD_EXTMOD
1401
1402 ###
1403 # External module support.
1404 # When building external modules the kernel used as basis is considered
1405 # read-only, and no consistency checks are made and the make
1406 # system is not used on the basis kernel. If updates are required
1407 # in the basis kernel ordinary make commands (without M=...) must
1408 # be used.
1409 #
1410 # The following are the only valid targets when building external
1411 # modules.
1412 # make M=dir clean     Delete all automatically generated files
1413 # make M=dir modules   Make all modules in specified dir
1414 # make M=dir           Same as 'make M=dir modules'
1415 # make M=dir modules_install
1416 #                      Install the modules built in the module directory
1417 #                      Assumes install directory is already created
1418
1419 # We are always building modules
1420 KBUILD_MODULES := 1
1421 PHONY += crmodverdir
1422 crmodverdir:
1423         $(cmd_crmodverdir)
1424
1425 PHONY += $(objtree)/Module.symvers
1426 $(objtree)/Module.symvers:
1427         @test -e $(objtree)/Module.symvers || ( \
1428         echo; \
1429         echo "  WARNING: Symbol version dump $(objtree)/Module.symvers"; \
1430         echo "           is missing; modules will have no dependencies and modversions."; \
1431         echo )
1432
1433 module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
1434 PHONY += $(module-dirs) modules
1435 $(module-dirs): crmodverdir $(objtree)/Module.symvers
1436         $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
1437
1438 modules: $(module-dirs)
1439         @$(kecho) '  Building modules, stage 2.';
1440         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1441
1442 PHONY += modules_install
1443 modules_install: _emodinst_ _emodinst_post
1444
1445 install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
1446 PHONY += _emodinst_
1447 _emodinst_:
1448         $(Q)mkdir -p $(MODLIB)/$(install-dir)
1449         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1450
1451 PHONY += _emodinst_post
1452 _emodinst_post: _emodinst_
1453         $(call cmd,depmod)
1454
1455 clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
1456
1457 PHONY += $(clean-dirs) clean
1458 $(clean-dirs):
1459         $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1460
1461 clean:  rm-dirs := $(MODVERDIR)
1462 clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
1463
1464 help:
1465         @echo  '  Building external modules.'
1466         @echo  '  Syntax: make -C path/to/kernel/src M=$$PWD target'
1467         @echo  ''
1468         @echo  '  modules         - default target, build the module(s)'
1469         @echo  '  modules_install - install the module'
1470         @echo  '  clean           - remove generated files in module directory only'
1471         @echo  ''
1472
1473 # Dummies...
1474 PHONY += prepare scripts
1475 prepare: ;
1476 scripts: ;
1477 endif # KBUILD_EXTMOD
1478
1479 clean: $(clean-dirs)
1480         $(call cmd,rmdirs)
1481         $(call cmd,rmfiles)
1482         @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1483                 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1484                 -o -name '*.ko.*' \
1485                 -o -name '*.dwo'  \
1486                 -o -name '*.su'  \
1487                 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1488                 -o -name '*.symtypes' -o -name 'modules.order' \
1489                 -o -name modules.builtin -o -name '.tmp_*.o.*' \
1490                 -o -name '*.ll' \
1491                 -o -name '*.gcno' \) -type f -print | xargs rm -f
1492
1493 # Generate tags for editors
1494 # ---------------------------------------------------------------------------
1495 quiet_cmd_tags = GEN     $@
1496       cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
1497
1498 tags TAGS cscope gtags: FORCE
1499         $(call cmd,tags)
1500
1501 # Scripts to check various things for consistency
1502 # ---------------------------------------------------------------------------
1503
1504 PHONY += includecheck versioncheck coccicheck namespacecheck export_report
1505
1506 includecheck:
1507         find $(srctree)/* $(RCS_FIND_IGNORE) \
1508                 -name '*.[hcS]' -type f -print | sort \
1509                 | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
1510
1511 versioncheck:
1512         find $(srctree)/* $(RCS_FIND_IGNORE) \
1513                 -name '*.[hcS]' -type f -print | sort \
1514                 | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
1515
1516 coccicheck:
1517         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
1518
1519 namespacecheck:
1520         $(PERL) $(srctree)/scripts/namespace.pl
1521
1522 export_report:
1523         $(PERL) $(srctree)/scripts/export_report.pl
1524
1525 endif #ifeq ($(config-targets),1)
1526 endif #ifeq ($(mixed-targets),1)
1527
1528 PHONY += checkstack kernelrelease kernelversion image_name
1529
1530 # UML needs a little special treatment here.  It wants to use the host
1531 # toolchain, so needs $(SUBARCH) passed to checkstack.pl.  Everyone
1532 # else wants $(ARCH), including people doing cross-builds, which means
1533 # that $(SUBARCH) doesn't work here.
1534 ifeq ($(ARCH), um)
1535 CHECKSTACK_ARCH := $(SUBARCH)
1536 else
1537 CHECKSTACK_ARCH := $(ARCH)
1538 endif
1539 checkstack:
1540         $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
1541         $(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
1542
1543 kernelrelease:
1544         @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1545
1546 kernelversion:
1547         @echo $(KERNELVERSION)
1548
1549 image_name:
1550         @echo $(KBUILD_IMAGE)
1551
1552 # Clear a bunch of variables before executing the submake
1553 tools/: FORCE
1554         $(Q)mkdir -p $(objtree)/tools
1555         $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(shell cd $(objtree) && /bin/pwd) subdir=tools -C $(src)/tools/
1556
1557 tools/%: FORCE
1558         $(Q)mkdir -p $(objtree)/tools
1559         $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(shell cd $(objtree) && /bin/pwd) subdir=tools -C $(src)/tools/ $*
1560
1561 # Single targets
1562 # ---------------------------------------------------------------------------
1563 # Single targets are compatible with:
1564 # - build with mixed source and output
1565 # - build with separate output dir 'make O=...'
1566 # - external modules
1567 #
1568 #  target-dir => where to store outputfile
1569 #  build-dir  => directory in kernel source tree to use
1570
1571 ifeq ($(KBUILD_EXTMOD),)
1572         build-dir  = $(patsubst %/,%,$(dir $@))
1573         target-dir = $(dir $@)
1574 else
1575         zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1576         build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1577         target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1578 endif
1579
1580 %.s: %.c prepare scripts FORCE
1581         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1582 %.i: %.c prepare scripts FORCE
1583         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1584 %.o: %.c prepare scripts FORCE
1585         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1586 %.lst: %.c prepare scripts FORCE
1587         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1588 %.s: %.S prepare scripts FORCE
1589         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1590 %.o: %.S prepare scripts FORCE
1591         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1592 %.symtypes: %.c prepare scripts FORCE
1593         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1594 %.ll: %.c prepare scripts FORCE
1595         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1596
1597 # Modules
1598 /: prepare scripts FORCE
1599         $(cmd_crmodverdir)
1600         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1601         $(build)=$(build-dir)
1602 # Make sure the latest headers are built for Documentation
1603 Documentation/: headers_install
1604 %/: prepare scripts FORCE
1605         $(cmd_crmodverdir)
1606         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1607         $(build)=$(build-dir)
1608 %.ko: prepare scripts FORCE
1609         $(cmd_crmodverdir)
1610         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
1611         $(build)=$(build-dir) $(@:.ko=.o)
1612         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1613
1614 # FIXME Should go into a make.lib or something
1615 # ===========================================================================
1616
1617 quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
1618       cmd_rmdirs = rm -rf $(rm-dirs)
1619
1620 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
1621       cmd_rmfiles = rm -f $(rm-files)
1622
1623 # Run depmod only if we have System.map and depmod is executable
1624 quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
1625       cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
1626                    $(KERNELRELEASE) "$(patsubst y,_,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX))"
1627
1628 # Create temporary dir for module support files
1629 # clean it up only when building all modules
1630 cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
1631                   $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
1632
1633 # read all saved command lines
1634
1635 targets := $(wildcard $(sort $(targets)))
1636 cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1637
1638 ifneq ($(cmd_files),)
1639   $(cmd_files): ;       # Do not try to update included dependency files
1640   include $(cmd_files)
1641 endif
1642
1643 endif   # skip-makefile
1644
1645 PHONY += FORCE
1646 FORCE:
1647
1648 # Declare the contents of the .PHONY variable as phony.  We keep that
1649 # information in a variable so we can use it in if_changed and friends.
1650 .PHONY: $(PHONY)