ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wxl/wsxl
[linux/fpc-iii.git] / sound / firewire / bebob / bebob_stream.c
blob926e5dcbb66a1a3ec523482ceb5e199f8c455b64
1 /*
2 * bebob_stream.c - a part of driver for BeBoB based devices
4 * Copyright (c) 2013-2014 Takashi Sakamoto
6 * Licensed under the terms of the GNU General Public License, version 2.
7 */
9 #include "./bebob.h"
11 #define CALLBACK_TIMEOUT 2000
12 #define FW_ISO_RESOURCE_DELAY 1000
15 * NOTE;
16 * For BeBoB streams, Both of input and output CMP connection are important.
18 * For most devices, each CMP connection starts to transmit/receive a
19 * corresponding stream. But for a few devices, both of CMP connection needs
20 * to start transmitting stream. An example is 'M-Audio Firewire 410'.
23 /* 128 is an arbitrary length but it seems to be enough */
24 #define FORMAT_MAXIMUM_LENGTH 128
26 const unsigned int snd_bebob_rate_table[SND_BEBOB_STRM_FMT_ENTRIES] = {
27 [0] = 32000,
28 [1] = 44100,
29 [2] = 48000,
30 [3] = 88200,
31 [4] = 96000,
32 [5] = 176400,
33 [6] = 192000,
37 * See: Table 51: Extended Stream Format Info ‘Sampling Frequency’
38 * in Additional AVC commands (Nov 2003, BridgeCo)
40 static const unsigned int bridgeco_freq_table[] = {
41 [0] = 0x02,
42 [1] = 0x03,
43 [2] = 0x04,
44 [3] = 0x0a,
45 [4] = 0x05,
46 [5] = 0x06,
47 [6] = 0x07,
50 static unsigned int
51 get_formation_index(unsigned int rate)
53 unsigned int i;
55 for (i = 0; i < ARRAY_SIZE(snd_bebob_rate_table); i++) {
56 if (snd_bebob_rate_table[i] == rate)
57 return i;
59 return -EINVAL;
62 int
63 snd_bebob_stream_get_rate(struct snd_bebob *bebob, unsigned int *curr_rate)
65 unsigned int tx_rate, rx_rate, trials;
66 int err;
68 trials = 0;
69 do {
70 err = avc_general_get_sig_fmt(bebob->unit, &tx_rate,
71 AVC_GENERAL_PLUG_DIR_OUT, 0);
72 } while (err == -EAGAIN && ++trials < 3);
73 if (err < 0)
74 goto end;
76 trials = 0;
77 do {
78 err = avc_general_get_sig_fmt(bebob->unit, &rx_rate,
79 AVC_GENERAL_PLUG_DIR_IN, 0);
80 } while (err == -EAGAIN && ++trials < 3);
81 if (err < 0)
82 goto end;
84 *curr_rate = rx_rate;
85 if (rx_rate == tx_rate)
86 goto end;
88 /* synchronize receive stream rate to transmit stream rate */
89 err = avc_general_set_sig_fmt(bebob->unit, rx_rate,
90 AVC_GENERAL_PLUG_DIR_IN, 0);
91 end:
92 return err;
95 int
96 snd_bebob_stream_set_rate(struct snd_bebob *bebob, unsigned int rate)
98 int err;
100 err = avc_general_set_sig_fmt(bebob->unit, rate,
101 AVC_GENERAL_PLUG_DIR_OUT, 0);
102 if (err < 0)
103 goto end;
105 err = avc_general_set_sig_fmt(bebob->unit, rate,
106 AVC_GENERAL_PLUG_DIR_IN, 0);
107 if (err < 0)
108 goto end;
111 * Some devices need a bit time for transition.
112 * 300msec is got by some experiments.
114 msleep(300);
115 end:
116 return err;
119 int snd_bebob_stream_get_clock_src(struct snd_bebob *bebob,
120 enum snd_bebob_clock_type *src)
122 const struct snd_bebob_clock_spec *clk_spec = bebob->spec->clock;
123 u8 addr[AVC_BRIDGECO_ADDR_BYTES], input[7];
124 unsigned int id;
125 enum avc_bridgeco_plug_type type;
126 int err = 0;
128 /* 1.The device has its own operation to switch source of clock */
129 if (clk_spec) {
130 err = clk_spec->get(bebob, &id);
131 if (err < 0) {
132 dev_err(&bebob->unit->device,
133 "fail to get clock source: %d\n", err);
134 goto end;
137 if (id >= clk_spec->num) {
138 dev_err(&bebob->unit->device,
139 "clock source %d out of range 0..%d\n",
140 id, clk_spec->num - 1);
141 err = -EIO;
142 goto end;
145 *src = clk_spec->types[id];
146 goto end;
150 * 2.The device don't support to switch source of clock then assumed
151 * to use internal clock always
153 if (bebob->sync_input_plug < 0) {
154 *src = SND_BEBOB_CLOCK_TYPE_INTERNAL;
155 goto end;
159 * 3.The device supports to switch source of clock by an usual way.
160 * Let's check input for 'Music Sub Unit Sync Input' plug.
162 avc_bridgeco_fill_msu_addr(addr, AVC_BRIDGECO_PLUG_DIR_IN,
163 bebob->sync_input_plug);
164 err = avc_bridgeco_get_plug_input(bebob->unit, addr, input);
165 if (err < 0) {
166 dev_err(&bebob->unit->device,
167 "fail to get an input for MSU in plug %d: %d\n",
168 bebob->sync_input_plug, err);
169 goto end;
173 * If there are no input plugs, all of fields are 0xff.
174 * Here check the first field. This field is used for direction.
176 if (input[0] == 0xff) {
177 *src = SND_BEBOB_CLOCK_TYPE_INTERNAL;
178 goto end;
181 /* The source from any output plugs is for one purpose only. */
182 if (input[0] == AVC_BRIDGECO_PLUG_DIR_OUT) {
184 * In BeBoB architecture, the source from music subunit may
185 * bypass from oPCR[0]. This means that this source gives
186 * synchronization to IEEE 1394 cycle start packet.
188 if (input[1] == AVC_BRIDGECO_PLUG_MODE_SUBUNIT &&
189 input[2] == 0x0c) {
190 *src = SND_BEBOB_CLOCK_TYPE_INTERNAL;
191 goto end;
193 /* The source from any input units is for several purposes. */
194 } else if (input[1] == AVC_BRIDGECO_PLUG_MODE_UNIT) {
195 if (input[2] == AVC_BRIDGECO_PLUG_UNIT_ISOC) {
196 if (input[3] == 0x00) {
198 * This source comes from iPCR[0]. This means
199 * that presentation timestamp calculated by
200 * SYT series of the received packets. In
201 * short, this driver is the master of
202 * synchronization.
204 *src = SND_BEBOB_CLOCK_TYPE_SYT;
205 goto end;
206 } else {
208 * This source comes from iPCR[1-29]. This
209 * means that the synchronization stream is not
210 * the Audio/MIDI compound stream.
212 *src = SND_BEBOB_CLOCK_TYPE_EXTERNAL;
213 goto end;
215 } else if (input[2] == AVC_BRIDGECO_PLUG_UNIT_EXT) {
216 /* Check type of this plug. */
217 avc_bridgeco_fill_unit_addr(addr,
218 AVC_BRIDGECO_PLUG_DIR_IN,
219 AVC_BRIDGECO_PLUG_UNIT_EXT,
220 input[3]);
221 err = avc_bridgeco_get_plug_type(bebob->unit, addr,
222 &type);
223 if (err < 0)
224 goto end;
226 if (type == AVC_BRIDGECO_PLUG_TYPE_DIG) {
228 * SPDIF/ADAT or sometimes (not always) word
229 * clock.
231 *src = SND_BEBOB_CLOCK_TYPE_EXTERNAL;
232 goto end;
233 } else if (type == AVC_BRIDGECO_PLUG_TYPE_SYNC) {
234 /* Often word clock. */
235 *src = SND_BEBOB_CLOCK_TYPE_EXTERNAL;
236 goto end;
237 } else if (type == AVC_BRIDGECO_PLUG_TYPE_ADDITION) {
239 * Not standard.
240 * Mostly, additional internal clock.
242 *src = SND_BEBOB_CLOCK_TYPE_INTERNAL;
243 goto end;
248 /* Not supported. */
249 err = -EIO;
250 end:
251 return err;
254 static unsigned int
255 map_data_channels(struct snd_bebob *bebob, struct amdtp_stream *s)
257 unsigned int sec, sections, ch, channels;
258 unsigned int pcm, midi, location;
259 unsigned int stm_pos, sec_loc, pos;
260 u8 *buf, addr[AVC_BRIDGECO_ADDR_BYTES], type;
261 enum avc_bridgeco_plug_dir dir;
262 int err;
265 * The length of return value of this command cannot be expected. Here
266 * use the maximum length of FCP.
268 buf = kzalloc(256, GFP_KERNEL);
269 if (buf == NULL)
270 return -ENOMEM;
272 if (s == &bebob->tx_stream)
273 dir = AVC_BRIDGECO_PLUG_DIR_OUT;
274 else
275 dir = AVC_BRIDGECO_PLUG_DIR_IN;
277 avc_bridgeco_fill_unit_addr(addr, dir, AVC_BRIDGECO_PLUG_UNIT_ISOC, 0);
278 err = avc_bridgeco_get_plug_ch_pos(bebob->unit, addr, buf, 256);
279 if (err < 0) {
280 dev_err(&bebob->unit->device,
281 "fail to get channel position for isoc %s plug 0: %d\n",
282 (dir == AVC_BRIDGECO_PLUG_DIR_IN) ? "in" : "out",
283 err);
284 goto end;
286 pos = 0;
288 /* positions in I/O buffer */
289 pcm = 0;
290 midi = 0;
292 /* the number of sections in AMDTP packet */
293 sections = buf[pos++];
295 for (sec = 0; sec < sections; sec++) {
296 /* type of this section */
297 avc_bridgeco_fill_unit_addr(addr, dir,
298 AVC_BRIDGECO_PLUG_UNIT_ISOC, 0);
299 err = avc_bridgeco_get_plug_section_type(bebob->unit, addr,
300 sec, &type);
301 if (err < 0) {
302 dev_err(&bebob->unit->device,
303 "fail to get section type for isoc %s plug 0: %d\n",
304 (dir == AVC_BRIDGECO_PLUG_DIR_IN) ? "in" :
305 "out",
306 err);
307 goto end;
309 /* NoType */
310 if (type == 0xff) {
311 err = -ENOSYS;
312 goto end;
315 /* the number of channels in this section */
316 channels = buf[pos++];
318 for (ch = 0; ch < channels; ch++) {
319 /* position of this channel in AMDTP packet */
320 stm_pos = buf[pos++] - 1;
321 /* location of this channel in this section */
322 sec_loc = buf[pos++] - 1;
325 * Basically the number of location is within the
326 * number of channels in this section. But some models
327 * of M-Audio don't follow this. Its location for MIDI
328 * is the position of MIDI channels in AMDTP packet.
330 if (sec_loc >= channels)
331 sec_loc = ch;
333 switch (type) {
334 /* for MIDI conformant data channel */
335 case 0x0a:
336 /* AMDTP_MAX_CHANNELS_FOR_MIDI is 1. */
337 if ((midi > 0) && (stm_pos != midi)) {
338 err = -ENOSYS;
339 goto end;
341 amdtp_am824_set_midi_position(s, stm_pos);
342 midi = stm_pos;
343 break;
344 /* for PCM data channel */
345 case 0x01: /* Headphone */
346 case 0x02: /* Microphone */
347 case 0x03: /* Line */
348 case 0x04: /* SPDIF */
349 case 0x05: /* ADAT */
350 case 0x06: /* TDIF */
351 case 0x07: /* MADI */
352 /* for undefined/changeable signal */
353 case 0x08: /* Analog */
354 case 0x09: /* Digital */
355 default:
356 location = pcm + sec_loc;
357 if (location >= AM824_MAX_CHANNELS_FOR_PCM) {
358 err = -ENOSYS;
359 goto end;
361 amdtp_am824_set_pcm_position(s, location,
362 stm_pos);
363 break;
367 if (type != 0x0a)
368 pcm += channels;
369 else
370 midi += channels;
372 end:
373 kfree(buf);
374 return err;
377 static int
378 init_both_connections(struct snd_bebob *bebob)
380 int err;
382 err = cmp_connection_init(&bebob->in_conn,
383 bebob->unit, CMP_INPUT, 0);
384 if (err < 0)
385 goto end;
387 err = cmp_connection_init(&bebob->out_conn,
388 bebob->unit, CMP_OUTPUT, 0);
389 if (err < 0)
390 cmp_connection_destroy(&bebob->in_conn);
391 end:
392 return err;
395 static int
396 check_connection_used_by_others(struct snd_bebob *bebob, struct amdtp_stream *s)
398 struct cmp_connection *conn;
399 bool used;
400 int err;
402 if (s == &bebob->tx_stream)
403 conn = &bebob->out_conn;
404 else
405 conn = &bebob->in_conn;
407 err = cmp_connection_check_used(conn, &used);
408 if ((err >= 0) && used && !amdtp_stream_running(s)) {
409 dev_err(&bebob->unit->device,
410 "Connection established by others: %cPCR[%d]\n",
411 (conn->direction == CMP_OUTPUT) ? 'o' : 'i',
412 conn->pcr_index);
413 err = -EBUSY;
416 return err;
419 static int
420 make_both_connections(struct snd_bebob *bebob, unsigned int rate)
422 int index, pcm_channels, midi_channels, err = 0;
424 if (bebob->connected)
425 goto end;
427 /* confirm params for both streams */
428 index = get_formation_index(rate);
429 pcm_channels = bebob->tx_stream_formations[index].pcm;
430 midi_channels = bebob->tx_stream_formations[index].midi;
431 err = amdtp_am824_set_parameters(&bebob->tx_stream, rate,
432 pcm_channels, midi_channels * 8,
433 false);
434 if (err < 0)
435 goto end;
437 pcm_channels = bebob->rx_stream_formations[index].pcm;
438 midi_channels = bebob->rx_stream_formations[index].midi;
439 err = amdtp_am824_set_parameters(&bebob->rx_stream, rate,
440 pcm_channels, midi_channels * 8,
441 false);
442 if (err < 0)
443 goto end;
445 /* establish connections for both streams */
446 err = cmp_connection_establish(&bebob->out_conn,
447 amdtp_stream_get_max_payload(&bebob->tx_stream));
448 if (err < 0)
449 goto end;
450 err = cmp_connection_establish(&bebob->in_conn,
451 amdtp_stream_get_max_payload(&bebob->rx_stream));
452 if (err < 0) {
453 cmp_connection_break(&bebob->out_conn);
454 goto end;
457 bebob->connected = true;
458 end:
459 return err;
462 static void
463 break_both_connections(struct snd_bebob *bebob)
465 cmp_connection_break(&bebob->in_conn);
466 cmp_connection_break(&bebob->out_conn);
468 bebob->connected = false;
470 /* These models seems to be in transition state for a longer time. */
471 if (bebob->maudio_special_quirk != NULL)
472 msleep(200);
475 static void
476 destroy_both_connections(struct snd_bebob *bebob)
478 cmp_connection_destroy(&bebob->in_conn);
479 cmp_connection_destroy(&bebob->out_conn);
482 static int
483 get_sync_mode(struct snd_bebob *bebob, enum cip_flags *sync_mode)
485 enum snd_bebob_clock_type src;
486 int err;
488 err = snd_bebob_stream_get_clock_src(bebob, &src);
489 if (err < 0)
490 return err;
492 switch (src) {
493 case SND_BEBOB_CLOCK_TYPE_INTERNAL:
494 case SND_BEBOB_CLOCK_TYPE_EXTERNAL:
495 *sync_mode = CIP_SYNC_TO_DEVICE;
496 break;
497 default:
498 case SND_BEBOB_CLOCK_TYPE_SYT:
499 *sync_mode = 0;
500 break;
503 return 0;
506 static int
507 start_stream(struct snd_bebob *bebob, struct amdtp_stream *stream,
508 unsigned int rate)
510 struct cmp_connection *conn;
511 int err = 0;
513 if (stream == &bebob->rx_stream)
514 conn = &bebob->in_conn;
515 else
516 conn = &bebob->out_conn;
518 /* channel mapping */
519 if (bebob->maudio_special_quirk == NULL) {
520 err = map_data_channels(bebob, stream);
521 if (err < 0)
522 goto end;
525 /* start amdtp stream */
526 err = amdtp_stream_start(stream,
527 conn->resources.channel,
528 conn->speed);
529 end:
530 return err;
533 int snd_bebob_stream_init_duplex(struct snd_bebob *bebob)
535 int err;
537 err = init_both_connections(bebob);
538 if (err < 0)
539 goto end;
541 err = amdtp_am824_init(&bebob->tx_stream, bebob->unit,
542 AMDTP_IN_STREAM, CIP_BLOCKING);
543 if (err < 0) {
544 amdtp_stream_destroy(&bebob->tx_stream);
545 destroy_both_connections(bebob);
546 goto end;
548 /* See comments in next function */
549 init_completion(&bebob->bus_reset);
550 bebob->tx_stream.flags |= CIP_SKIP_INIT_DBC_CHECK;
553 * BeBoB v3 transfers packets with these qurks:
554 * - In the beginning of streaming, the value of dbc is incremented
555 * even if no data blocks are transferred.
556 * - The value of dbc is reset suddenly.
558 if (bebob->version > 2)
559 bebob->tx_stream.flags |= CIP_EMPTY_HAS_WRONG_DBC |
560 CIP_SKIP_DBC_ZERO_CHECK;
563 * At high sampling rate, M-Audio special firmware transmits empty
564 * packet with the value of dbc incremented by 8 but the others are
565 * valid to IEC 61883-1.
567 if (bebob->maudio_special_quirk)
568 bebob->tx_stream.flags |= CIP_EMPTY_HAS_WRONG_DBC;
570 err = amdtp_am824_init(&bebob->rx_stream, bebob->unit,
571 AMDTP_OUT_STREAM, CIP_BLOCKING);
572 if (err < 0) {
573 amdtp_stream_destroy(&bebob->tx_stream);
574 amdtp_stream_destroy(&bebob->rx_stream);
575 destroy_both_connections(bebob);
577 end:
578 return err;
581 int snd_bebob_stream_start_duplex(struct snd_bebob *bebob, unsigned int rate)
583 const struct snd_bebob_rate_spec *rate_spec = bebob->spec->rate;
584 struct amdtp_stream *master, *slave;
585 enum cip_flags sync_mode;
586 unsigned int curr_rate;
587 bool updated = false;
588 int err = 0;
591 * Normal BeBoB firmware has a quirk at bus reset to transmits packets
592 * with discontinuous value in dbc field.
594 * This 'struct completion' is used to call .update() at first to update
595 * connections/streams. Next following codes handle streaming error.
597 if (amdtp_streaming_error(&bebob->tx_stream)) {
598 if (completion_done(&bebob->bus_reset))
599 reinit_completion(&bebob->bus_reset);
601 updated = (wait_for_completion_interruptible_timeout(
602 &bebob->bus_reset,
603 msecs_to_jiffies(FW_ISO_RESOURCE_DELAY)) > 0);
606 mutex_lock(&bebob->mutex);
608 /* Need no substreams */
609 if (atomic_read(&bebob->substreams_counter) == 0)
610 goto end;
612 err = get_sync_mode(bebob, &sync_mode);
613 if (err < 0)
614 goto end;
615 if (sync_mode == CIP_SYNC_TO_DEVICE) {
616 master = &bebob->tx_stream;
617 slave = &bebob->rx_stream;
618 } else {
619 master = &bebob->rx_stream;
620 slave = &bebob->tx_stream;
624 * Considering JACK/FFADO streaming:
625 * TODO: This can be removed hwdep functionality becomes popular.
627 err = check_connection_used_by_others(bebob, master);
628 if (err < 0)
629 goto end;
632 * packet queueing error or detecting discontinuity
634 * At bus reset, connections should not be broken here. So streams need
635 * to be re-started. This is a reason to use SKIP_INIT_DBC_CHECK flag.
637 if (amdtp_streaming_error(master))
638 amdtp_stream_stop(master);
639 if (amdtp_streaming_error(slave))
640 amdtp_stream_stop(slave);
641 if (!updated &&
642 !amdtp_stream_running(master) && !amdtp_stream_running(slave))
643 break_both_connections(bebob);
645 /* stop streams if rate is different */
646 err = rate_spec->get(bebob, &curr_rate);
647 if (err < 0) {
648 dev_err(&bebob->unit->device,
649 "fail to get sampling rate: %d\n", err);
650 goto end;
652 if (rate == 0)
653 rate = curr_rate;
654 if (rate != curr_rate) {
655 amdtp_stream_stop(master);
656 amdtp_stream_stop(slave);
657 break_both_connections(bebob);
660 /* master should be always running */
661 if (!amdtp_stream_running(master)) {
662 amdtp_stream_set_sync(sync_mode, master, slave);
663 bebob->master = master;
666 * NOTE:
667 * If establishing connections at first, Yamaha GO46
668 * (and maybe Terratec X24) don't generate sound.
670 * For firmware customized by M-Audio, refer to next NOTE.
672 if (bebob->maudio_special_quirk == NULL) {
673 err = rate_spec->set(bebob, rate);
674 if (err < 0) {
675 dev_err(&bebob->unit->device,
676 "fail to set sampling rate: %d\n",
677 err);
678 goto end;
682 err = make_both_connections(bebob, rate);
683 if (err < 0)
684 goto end;
686 err = start_stream(bebob, master, rate);
687 if (err < 0) {
688 dev_err(&bebob->unit->device,
689 "fail to run AMDTP master stream:%d\n", err);
690 break_both_connections(bebob);
691 goto end;
695 * NOTE:
696 * The firmware customized by M-Audio uses these commands to
697 * start transmitting stream. This is not usual way.
699 if (bebob->maudio_special_quirk != NULL) {
700 err = rate_spec->set(bebob, rate);
701 if (err < 0) {
702 dev_err(&bebob->unit->device,
703 "fail to ensure sampling rate: %d\n",
704 err);
705 amdtp_stream_stop(master);
706 break_both_connections(bebob);
707 goto end;
711 /* wait first callback */
712 if (!amdtp_stream_wait_callback(master, CALLBACK_TIMEOUT)) {
713 amdtp_stream_stop(master);
714 break_both_connections(bebob);
715 err = -ETIMEDOUT;
716 goto end;
720 /* start slave if needed */
721 if (!amdtp_stream_running(slave)) {
722 err = start_stream(bebob, slave, rate);
723 if (err < 0) {
724 dev_err(&bebob->unit->device,
725 "fail to run AMDTP slave stream:%d\n", err);
726 amdtp_stream_stop(master);
727 break_both_connections(bebob);
728 goto end;
731 /* wait first callback */
732 if (!amdtp_stream_wait_callback(slave, CALLBACK_TIMEOUT)) {
733 amdtp_stream_stop(slave);
734 amdtp_stream_stop(master);
735 break_both_connections(bebob);
736 err = -ETIMEDOUT;
739 end:
740 mutex_unlock(&bebob->mutex);
741 return err;
744 void snd_bebob_stream_stop_duplex(struct snd_bebob *bebob)
746 struct amdtp_stream *master, *slave;
748 if (bebob->master == &bebob->rx_stream) {
749 slave = &bebob->tx_stream;
750 master = &bebob->rx_stream;
751 } else {
752 slave = &bebob->rx_stream;
753 master = &bebob->tx_stream;
756 mutex_lock(&bebob->mutex);
758 if (atomic_read(&bebob->substreams_counter) == 0) {
759 amdtp_stream_pcm_abort(master);
760 amdtp_stream_stop(master);
762 amdtp_stream_pcm_abort(slave);
763 amdtp_stream_stop(slave);
765 break_both_connections(bebob);
768 mutex_unlock(&bebob->mutex);
771 void snd_bebob_stream_update_duplex(struct snd_bebob *bebob)
773 /* vs. XRUN recovery due to discontinuity at bus reset */
774 mutex_lock(&bebob->mutex);
776 if ((cmp_connection_update(&bebob->in_conn) < 0) ||
777 (cmp_connection_update(&bebob->out_conn) < 0)) {
778 amdtp_stream_pcm_abort(&bebob->rx_stream);
779 amdtp_stream_pcm_abort(&bebob->tx_stream);
780 amdtp_stream_stop(&bebob->rx_stream);
781 amdtp_stream_stop(&bebob->tx_stream);
782 break_both_connections(bebob);
783 } else {
784 amdtp_stream_update(&bebob->rx_stream);
785 amdtp_stream_update(&bebob->tx_stream);
788 /* wake up stream_start_duplex() */
789 if (!completion_done(&bebob->bus_reset))
790 complete_all(&bebob->bus_reset);
792 mutex_unlock(&bebob->mutex);
796 * This function should be called before starting streams or after stopping
797 * streams.
799 void snd_bebob_stream_destroy_duplex(struct snd_bebob *bebob)
801 amdtp_stream_destroy(&bebob->rx_stream);
802 amdtp_stream_destroy(&bebob->tx_stream);
804 destroy_both_connections(bebob);
808 * See: Table 50: Extended Stream Format Info Format Hierarchy Level 2’
809 * in Additional AVC commands (Nov 2003, BridgeCo)
810 * Also 'Clause 12 AM824 sequence adaption layers' in IEC 61883-6:2005
812 static int
813 parse_stream_formation(u8 *buf, unsigned int len,
814 struct snd_bebob_stream_formation *formation)
816 unsigned int i, e, channels, format;
819 * this module can support a hierarchy combination that:
820 * Root: Audio and Music (0x90)
821 * Level 1: AM824 Compound (0x40)
823 if ((buf[0] != 0x90) || (buf[1] != 0x40))
824 return -ENOSYS;
826 /* check sampling rate */
827 for (i = 0; i < ARRAY_SIZE(bridgeco_freq_table); i++) {
828 if (buf[2] == bridgeco_freq_table[i])
829 break;
831 if (i == ARRAY_SIZE(bridgeco_freq_table))
832 return -ENOSYS;
834 /* Avoid double count by different entries for the same rate. */
835 memset(&formation[i], 0, sizeof(struct snd_bebob_stream_formation));
837 for (e = 0; e < buf[4]; e++) {
838 channels = buf[5 + e * 2];
839 format = buf[6 + e * 2];
841 switch (format) {
842 /* IEC 60958 Conformant, currently handled as MBLA */
843 case 0x00:
844 /* Multi bit linear audio */
845 case 0x06: /* Raw */
846 formation[i].pcm += channels;
847 break;
848 /* MIDI Conformant */
849 case 0x0d:
850 formation[i].midi += channels;
851 break;
852 /* IEC 61937-3 to 7 */
853 case 0x01:
854 case 0x02:
855 case 0x03:
856 case 0x04:
857 case 0x05:
858 /* Multi bit linear audio */
859 case 0x07: /* DVD-Audio */
860 case 0x0c: /* High Precision */
861 /* One Bit Audio */
862 case 0x08: /* (Plain) Raw */
863 case 0x09: /* (Plain) SACD */
864 case 0x0a: /* (Encoded) Raw */
865 case 0x0b: /* (Encoded) SACD */
866 /* Synchronization Stream (Stereo Raw audio) */
867 case 0x40:
868 /* Don't care */
869 case 0xff:
870 default:
871 return -ENOSYS; /* not supported */
875 if (formation[i].pcm > AM824_MAX_CHANNELS_FOR_PCM ||
876 formation[i].midi > AM824_MAX_CHANNELS_FOR_MIDI)
877 return -ENOSYS;
879 return 0;
882 static int
883 fill_stream_formations(struct snd_bebob *bebob, enum avc_bridgeco_plug_dir dir,
884 unsigned short pid)
886 u8 *buf;
887 struct snd_bebob_stream_formation *formations;
888 unsigned int len, eid;
889 u8 addr[AVC_BRIDGECO_ADDR_BYTES];
890 int err;
892 buf = kmalloc(FORMAT_MAXIMUM_LENGTH, GFP_KERNEL);
893 if (buf == NULL)
894 return -ENOMEM;
896 if (dir == AVC_BRIDGECO_PLUG_DIR_IN)
897 formations = bebob->rx_stream_formations;
898 else
899 formations = bebob->tx_stream_formations;
901 for (eid = 0; eid < SND_BEBOB_STRM_FMT_ENTRIES; eid++) {
902 len = FORMAT_MAXIMUM_LENGTH;
903 avc_bridgeco_fill_unit_addr(addr, dir,
904 AVC_BRIDGECO_PLUG_UNIT_ISOC, pid);
905 err = avc_bridgeco_get_plug_strm_fmt(bebob->unit, addr, buf,
906 &len, eid);
907 /* No entries remained. */
908 if (err == -EINVAL && eid > 0) {
909 err = 0;
910 break;
911 } else if (err < 0) {
912 dev_err(&bebob->unit->device,
913 "fail to get stream format %d for isoc %s plug %d:%d\n",
914 eid,
915 (dir == AVC_BRIDGECO_PLUG_DIR_IN) ? "in" :
916 "out",
917 pid, err);
918 break;
921 err = parse_stream_formation(buf, len, formations);
922 if (err < 0)
923 break;
926 kfree(buf);
927 return err;
930 static int
931 seek_msu_sync_input_plug(struct snd_bebob *bebob)
933 u8 plugs[AVC_PLUG_INFO_BUF_BYTES], addr[AVC_BRIDGECO_ADDR_BYTES];
934 unsigned int i;
935 enum avc_bridgeco_plug_type type;
936 int err;
938 /* Get the number of Music Sub Unit for both direction. */
939 err = avc_general_get_plug_info(bebob->unit, 0x0c, 0x00, 0x00, plugs);
940 if (err < 0) {
941 dev_err(&bebob->unit->device,
942 "fail to get info for MSU in/out plugs: %d\n",
943 err);
944 goto end;
947 /* seek destination plugs for 'MSU sync input' */
948 bebob->sync_input_plug = -1;
949 for (i = 0; i < plugs[0]; i++) {
950 avc_bridgeco_fill_msu_addr(addr, AVC_BRIDGECO_PLUG_DIR_IN, i);
951 err = avc_bridgeco_get_plug_type(bebob->unit, addr, &type);
952 if (err < 0) {
953 dev_err(&bebob->unit->device,
954 "fail to get type for MSU in plug %d: %d\n",
955 i, err);
956 goto end;
959 if (type == AVC_BRIDGECO_PLUG_TYPE_SYNC) {
960 bebob->sync_input_plug = i;
961 break;
964 end:
965 return err;
968 int snd_bebob_stream_discover(struct snd_bebob *bebob)
970 const struct snd_bebob_clock_spec *clk_spec = bebob->spec->clock;
971 u8 plugs[AVC_PLUG_INFO_BUF_BYTES], addr[AVC_BRIDGECO_ADDR_BYTES];
972 enum avc_bridgeco_plug_type type;
973 unsigned int i;
974 int err;
976 /* the number of plugs for isoc in/out, ext in/out */
977 err = avc_general_get_plug_info(bebob->unit, 0x1f, 0x07, 0x00, plugs);
978 if (err < 0) {
979 dev_err(&bebob->unit->device,
980 "fail to get info for isoc/external in/out plugs: %d\n",
981 err);
982 goto end;
986 * This module supports at least one isoc input plug and one isoc
987 * output plug.
989 if ((plugs[0] == 0) || (plugs[1] == 0)) {
990 err = -ENOSYS;
991 goto end;
994 avc_bridgeco_fill_unit_addr(addr, AVC_BRIDGECO_PLUG_DIR_IN,
995 AVC_BRIDGECO_PLUG_UNIT_ISOC, 0);
996 err = avc_bridgeco_get_plug_type(bebob->unit, addr, &type);
997 if (err < 0) {
998 dev_err(&bebob->unit->device,
999 "fail to get type for isoc in plug 0: %d\n", err);
1000 goto end;
1001 } else if (type != AVC_BRIDGECO_PLUG_TYPE_ISOC) {
1002 err = -ENOSYS;
1003 goto end;
1005 err = fill_stream_formations(bebob, AVC_BRIDGECO_PLUG_DIR_IN, 0);
1006 if (err < 0)
1007 goto end;
1009 avc_bridgeco_fill_unit_addr(addr, AVC_BRIDGECO_PLUG_DIR_OUT,
1010 AVC_BRIDGECO_PLUG_UNIT_ISOC, 0);
1011 err = avc_bridgeco_get_plug_type(bebob->unit, addr, &type);
1012 if (err < 0) {
1013 dev_err(&bebob->unit->device,
1014 "fail to get type for isoc out plug 0: %d\n", err);
1015 goto end;
1016 } else if (type != AVC_BRIDGECO_PLUG_TYPE_ISOC) {
1017 err = -ENOSYS;
1018 goto end;
1020 err = fill_stream_formations(bebob, AVC_BRIDGECO_PLUG_DIR_OUT, 0);
1021 if (err < 0)
1022 goto end;
1024 /* count external input plugs for MIDI */
1025 bebob->midi_input_ports = 0;
1026 for (i = 0; i < plugs[2]; i++) {
1027 avc_bridgeco_fill_unit_addr(addr, AVC_BRIDGECO_PLUG_DIR_IN,
1028 AVC_BRIDGECO_PLUG_UNIT_EXT, i);
1029 err = avc_bridgeco_get_plug_type(bebob->unit, addr, &type);
1030 if (err < 0) {
1031 dev_err(&bebob->unit->device,
1032 "fail to get type for external in plug %d: %d\n",
1033 i, err);
1034 goto end;
1035 } else if (type == AVC_BRIDGECO_PLUG_TYPE_MIDI) {
1036 bebob->midi_input_ports++;
1040 /* count external output plugs for MIDI */
1041 bebob->midi_output_ports = 0;
1042 for (i = 0; i < plugs[3]; i++) {
1043 avc_bridgeco_fill_unit_addr(addr, AVC_BRIDGECO_PLUG_DIR_OUT,
1044 AVC_BRIDGECO_PLUG_UNIT_EXT, i);
1045 err = avc_bridgeco_get_plug_type(bebob->unit, addr, &type);
1046 if (err < 0) {
1047 dev_err(&bebob->unit->device,
1048 "fail to get type for external out plug %d: %d\n",
1049 i, err);
1050 goto end;
1051 } else if (type == AVC_BRIDGECO_PLUG_TYPE_MIDI) {
1052 bebob->midi_output_ports++;
1056 /* for check source of clock later */
1057 if (!clk_spec)
1058 err = seek_msu_sync_input_plug(bebob);
1059 end:
1060 return err;
1063 void snd_bebob_stream_lock_changed(struct snd_bebob *bebob)
1065 bebob->dev_lock_changed = true;
1066 wake_up(&bebob->hwdep_wait);
1069 int snd_bebob_stream_lock_try(struct snd_bebob *bebob)
1071 int err;
1073 spin_lock_irq(&bebob->lock);
1075 /* user land lock this */
1076 if (bebob->dev_lock_count < 0) {
1077 err = -EBUSY;
1078 goto end;
1081 /* this is the first time */
1082 if (bebob->dev_lock_count++ == 0)
1083 snd_bebob_stream_lock_changed(bebob);
1084 err = 0;
1085 end:
1086 spin_unlock_irq(&bebob->lock);
1087 return err;
1090 void snd_bebob_stream_lock_release(struct snd_bebob *bebob)
1092 spin_lock_irq(&bebob->lock);
1094 if (WARN_ON(bebob->dev_lock_count <= 0))
1095 goto end;
1096 if (--bebob->dev_lock_count == 0)
1097 snd_bebob_stream_lock_changed(bebob);
1098 end:
1099 spin_unlock_irq(&bebob->lock);