2 * linux/arch/arm/mach-sa1100/generic.c
4 * Author: Nicolas Pitre
6 * Code common to all SA11x0 machines.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
12 #include <linux/gpio.h>
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/delay.h>
17 #include <linux/dma-mapping.h>
19 #include <linux/cpufreq.h>
20 #include <linux/ioport.h>
21 #include <linux/platform_device.h>
22 #include <linux/reboot.h>
23 #include <linux/irqchip/irq-sa11x0.h>
25 #include <video/sa1100fb.h>
27 #include <soc/sa1100/pwer.h>
29 #include <asm/div64.h>
30 #include <asm/mach/map.h>
31 #include <asm/mach/flash.h>
33 #include <asm/system_misc.h>
35 #include <mach/hardware.h>
36 #include <mach/irqs.h>
39 #include <clocksource/pxa.h>
41 unsigned int reset_status
;
42 EXPORT_SYMBOL(reset_status
);
47 * This table is setup for a 3.6864MHz Crystal.
49 struct cpufreq_frequency_table sa11x0_freq_table
[NR_FREQS
+1] = {
50 { .frequency
= 59000, /* 59.0 MHz */},
51 { .frequency
= 73700, /* 73.7 MHz */},
52 { .frequency
= 88500, /* 88.5 MHz */},
53 { .frequency
= 103200, /* 103.2 MHz */},
54 { .frequency
= 118000, /* 118.0 MHz */},
55 { .frequency
= 132700, /* 132.7 MHz */},
56 { .frequency
= 147500, /* 147.5 MHz */},
57 { .frequency
= 162200, /* 162.2 MHz */},
58 { .frequency
= 176900, /* 176.9 MHz */},
59 { .frequency
= 191700, /* 191.7 MHz */},
60 { .frequency
= 206400, /* 206.4 MHz */},
61 { .frequency
= 221200, /* 221.2 MHz */},
62 { .frequency
= 235900, /* 235.9 MHz */},
63 { .frequency
= 250700, /* 250.7 MHz */},
64 { .frequency
= 265400, /* 265.4 MHz */},
65 { .frequency
= 280200, /* 280.2 MHz */},
66 { .frequency
= CPUFREQ_TABLE_END
, },
69 unsigned int sa11x0_getspeed(unsigned int cpu
)
73 return sa11x0_freq_table
[PPCR
& 0xf].frequency
;
77 * Default power-off for SA1100
79 static void sa1100_power_off(void)
83 /* disable internal oscillator, float CS lines */
84 PCFR
= (PCFR_OPDE
| PCFR_FP
| PCFR_FS
);
85 /* enable wake-up on GPIO0 (Assabet...) */
86 PWER
= GFER
= GRER
= 1;
88 * set scratchpad to zero, just in case it is used as a
89 * restart address by the bootloader.
92 /* enter sleep mode */
96 void sa11x0_restart(enum reboot_mode mode
, const char *cmd
)
98 if (mode
== REBOOT_SOFT
) {
99 /* Jump into ROM at address 0 */
102 /* Use on-chip reset capability */
107 static void sa11x0_register_device(struct platform_device
*dev
, void *data
)
110 dev
->dev
.platform_data
= data
;
111 err
= platform_device_register(dev
);
113 printk(KERN_ERR
"Unable to register device %s: %d\n",
118 static struct resource sa11x0udc_resources
[] = {
119 [0] = DEFINE_RES_MEM(__PREG(Ser0UDCCR
), SZ_64K
),
120 [1] = DEFINE_RES_IRQ(IRQ_Ser0UDC
),
123 static u64 sa11x0udc_dma_mask
= 0xffffffffUL
;
125 static struct platform_device sa11x0udc_device
= {
126 .name
= "sa11x0-udc",
129 .dma_mask
= &sa11x0udc_dma_mask
,
130 .coherent_dma_mask
= 0xffffffff,
132 .num_resources
= ARRAY_SIZE(sa11x0udc_resources
),
133 .resource
= sa11x0udc_resources
,
136 static struct resource sa11x0uart1_resources
[] = {
137 [0] = DEFINE_RES_MEM(__PREG(Ser1UTCR0
), SZ_64K
),
138 [1] = DEFINE_RES_IRQ(IRQ_Ser1UART
),
141 static struct platform_device sa11x0uart1_device
= {
142 .name
= "sa11x0-uart",
144 .num_resources
= ARRAY_SIZE(sa11x0uart1_resources
),
145 .resource
= sa11x0uart1_resources
,
148 static struct resource sa11x0uart3_resources
[] = {
149 [0] = DEFINE_RES_MEM(__PREG(Ser3UTCR0
), SZ_64K
),
150 [1] = DEFINE_RES_IRQ(IRQ_Ser3UART
),
153 static struct platform_device sa11x0uart3_device
= {
154 .name
= "sa11x0-uart",
156 .num_resources
= ARRAY_SIZE(sa11x0uart3_resources
),
157 .resource
= sa11x0uart3_resources
,
160 static struct resource sa11x0mcp_resources
[] = {
161 [0] = DEFINE_RES_MEM(__PREG(Ser4MCCR0
), SZ_64K
),
162 [1] = DEFINE_RES_MEM(__PREG(Ser4MCCR1
), 4),
163 [2] = DEFINE_RES_IRQ(IRQ_Ser4MCP
),
166 static u64 sa11x0mcp_dma_mask
= 0xffffffffUL
;
168 static struct platform_device sa11x0mcp_device
= {
169 .name
= "sa11x0-mcp",
172 .dma_mask
= &sa11x0mcp_dma_mask
,
173 .coherent_dma_mask
= 0xffffffff,
175 .num_resources
= ARRAY_SIZE(sa11x0mcp_resources
),
176 .resource
= sa11x0mcp_resources
,
179 void __init
sa11x0_ppc_configure_mcp(void)
181 /* Setup the PPC unit for the MCP */
183 PPDR
|= PPC_TXD4
| PPC_SCLK
| PPC_SFRM
;
185 PSDR
&= ~(PPC_TXD4
| PPC_SCLK
| PPC_SFRM
);
186 PPSR
&= ~(PPC_TXD4
| PPC_SCLK
| PPC_SFRM
);
189 void sa11x0_register_mcp(struct mcp_plat_data
*data
)
191 sa11x0_register_device(&sa11x0mcp_device
, data
);
194 static struct resource sa11x0ssp_resources
[] = {
195 [0] = DEFINE_RES_MEM(0x80070000, SZ_64K
),
196 [1] = DEFINE_RES_IRQ(IRQ_Ser4SSP
),
199 static u64 sa11x0ssp_dma_mask
= 0xffffffffUL
;
201 static struct platform_device sa11x0ssp_device
= {
202 .name
= "sa11x0-ssp",
205 .dma_mask
= &sa11x0ssp_dma_mask
,
206 .coherent_dma_mask
= 0xffffffff,
208 .num_resources
= ARRAY_SIZE(sa11x0ssp_resources
),
209 .resource
= sa11x0ssp_resources
,
212 static struct resource sa11x0fb_resources
[] = {
213 [0] = DEFINE_RES_MEM(0xb0100000, SZ_64K
),
214 [1] = DEFINE_RES_IRQ(IRQ_LCD
),
217 static struct platform_device sa11x0fb_device
= {
221 .coherent_dma_mask
= 0xffffffff,
223 .num_resources
= ARRAY_SIZE(sa11x0fb_resources
),
224 .resource
= sa11x0fb_resources
,
227 void sa11x0_register_lcd(struct sa1100fb_mach_info
*inf
)
229 sa11x0_register_device(&sa11x0fb_device
, inf
);
232 static struct platform_device sa11x0pcmcia_device
= {
233 .name
= "sa11x0-pcmcia",
237 static struct platform_device sa11x0mtd_device
= {
238 .name
= "sa1100-mtd",
242 void sa11x0_register_mtd(struct flash_platform_data
*flash
,
243 struct resource
*res
, int nr
)
245 flash
->name
= "sa1100";
246 sa11x0mtd_device
.resource
= res
;
247 sa11x0mtd_device
.num_resources
= nr
;
248 sa11x0_register_device(&sa11x0mtd_device
, flash
);
251 static struct resource sa11x0ir_resources
[] = {
252 DEFINE_RES_MEM(__PREG(Ser2UTCR0
), 0x24),
253 DEFINE_RES_MEM(__PREG(Ser2HSCR0
), 0x1c),
254 DEFINE_RES_MEM(__PREG(Ser2HSCR2
), 0x04),
255 DEFINE_RES_IRQ(IRQ_Ser2ICP
),
258 static struct platform_device sa11x0ir_device
= {
261 .num_resources
= ARRAY_SIZE(sa11x0ir_resources
),
262 .resource
= sa11x0ir_resources
,
265 void sa11x0_register_irda(struct irda_platform_data
*irda
)
267 sa11x0_register_device(&sa11x0ir_device
, irda
);
270 static struct resource sa1100_rtc_resources
[] = {
271 DEFINE_RES_MEM(0x90010000, 0x40),
272 DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz
, "rtc 1Hz"),
273 DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm
, "rtc alarm"),
276 static struct platform_device sa11x0rtc_device
= {
277 .name
= "sa1100-rtc",
279 .num_resources
= ARRAY_SIZE(sa1100_rtc_resources
),
280 .resource
= sa1100_rtc_resources
,
283 static struct resource sa11x0dma_resources
[] = {
284 DEFINE_RES_MEM(DMA_PHYS
, DMA_SIZE
),
285 DEFINE_RES_IRQ(IRQ_DMA0
),
286 DEFINE_RES_IRQ(IRQ_DMA1
),
287 DEFINE_RES_IRQ(IRQ_DMA2
),
288 DEFINE_RES_IRQ(IRQ_DMA3
),
289 DEFINE_RES_IRQ(IRQ_DMA4
),
290 DEFINE_RES_IRQ(IRQ_DMA5
),
293 static u64 sa11x0dma_dma_mask
= DMA_BIT_MASK(32);
295 static struct platform_device sa11x0dma_device
= {
296 .name
= "sa11x0-dma",
299 .dma_mask
= &sa11x0dma_dma_mask
,
300 .coherent_dma_mask
= 0xffffffff,
302 .num_resources
= ARRAY_SIZE(sa11x0dma_resources
),
303 .resource
= sa11x0dma_resources
,
306 static struct platform_device
*sa11x0_devices
[] __initdata
= {
311 &sa11x0pcmcia_device
,
316 static int __init
sa1100_init(void)
318 pm_power_off
= sa1100_power_off
;
319 return platform_add_devices(sa11x0_devices
, ARRAY_SIZE(sa11x0_devices
));
322 arch_initcall(sa1100_init
);
324 void __init
sa11x0_init_late(void)
330 * Common I/O mapping:
332 * Typically, static virtual address mappings are as follow:
334 * 0xf0000000-0xf3ffffff: miscellaneous stuff (CPLDs, etc.)
335 * 0xf4000000-0xf4ffffff: SA-1111
336 * 0xf5000000-0xf5ffffff: reserved (used by cache flushing area)
337 * 0xf6000000-0xfffeffff: reserved (internal SA1100 IO defined above)
338 * 0xffff0000-0xffff0fff: SA1100 exception vectors
339 * 0xffff2000-0xffff2fff: Minicache copy_user_page area
341 * Below 0xe8000000 is reserved for vm allocation.
343 * The machine specific code must provide the extra mapping beside the
344 * default mapping provided here.
347 static struct map_desc standard_io_desc
[] __initdata
= {
349 .virtual = 0xf8000000,
350 .pfn
= __phys_to_pfn(0x80000000),
351 .length
= 0x00100000,
354 .virtual = 0xfa000000,
355 .pfn
= __phys_to_pfn(0x90000000),
356 .length
= 0x00100000,
359 .virtual = 0xfc000000,
360 .pfn
= __phys_to_pfn(0xa0000000),
361 .length
= 0x00100000,
364 .virtual = 0xfe000000,
365 .pfn
= __phys_to_pfn(0xb0000000),
366 .length
= 0x00200000,
371 void __init
sa1100_map_io(void)
373 iotable_init(standard_io_desc
, ARRAY_SIZE(standard_io_desc
));
376 void __init
sa1100_timer_init(void)
378 pxa_timer_nodt_init(IRQ_OST0
, io_p2v(0x90000000), 3686400);
381 static struct resource irq_resource
=
382 DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K
, "irqs");
384 void __init
sa1100_init_irq(void)
386 request_resource(&iomem_resource
, &irq_resource
);
388 sa11x0_init_irq_nodt(IRQ_GPIO0_SC
, irq_resource
.start
);
394 * Disable the memory bus request/grant signals on the SA1110 to
395 * ensure that we don't receive spurious memory requests. We set
396 * the MBGNT signal false to ensure the SA1111 doesn't own the
399 void sa1110_mb_disable(void)
403 local_irq_save(flags
);
407 GPDR
= (GPDR
& ~GPIO_MBREQ
) | GPIO_MBGNT
;
409 GAFR
&= ~(GPIO_MBGNT
| GPIO_MBREQ
);
411 local_irq_restore(flags
);
415 * If the system is going to use the SA-1111 DMA engines, set up
416 * the memory bus request/grant pins.
418 void sa1110_mb_enable(void)
422 local_irq_save(flags
);
426 GPDR
= (GPDR
& ~GPIO_MBREQ
) | GPIO_MBGNT
;
428 GAFR
|= (GPIO_MBGNT
| GPIO_MBREQ
);
431 local_irq_restore(flags
);
434 int sa11x0_gpio_set_wake(unsigned int gpio
, unsigned int on
)
444 int sa11x0_sc_set_wake(unsigned int irq
, unsigned int on
)
446 if (BIT(irq
) != IC_RTCAlrm
)