arch/blackfin/mach-bf561/boards/acvilon.c

   1 /*
   2  * File:         arch/blackfin/mach-bf561/acvilon.c
   3  * Based on:     arch/blackfin/mach-bf561/ezkit.c
   4  * Author:
   5  *
   6  * Created:
   7  * Description:
   8  *
   9  * Modified:
  10  *               Copyright 2004-2006 Analog Devices Inc.
  11  *               Copyright 2009 CJSC "NII STT"
  12  *
  13  * Bugs:
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, see the file COPYING, or write
  27  * to the Free Software Foundation, Inc.,
  28  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  29  *
  30  *
  31  * For more information about Acvilon BF561 SoM please
  32  * go to http://www.niistt.ru/
  33  *
  34  */
  35
  36 #include <linux/device.h>
  37 #include <linux/platform_device.h>
  38 #include <linux/mtd/mtd.h>
  39 #include <linux/mtd/partitions.h>
  40 #include <linux/mtd/physmap.h>
  41 #include <linux/mtd/nand.h>
  42 #include <linux/mtd/plat-ram.h>
  43 #include <linux/spi/spi.h>
  44 #include <linux/spi/flash.h>
  45 #include <linux/irq.h>
  46 #include <linux/interrupt.h>
  47 #include <linux/gpio.h>
  48 #include <linux/jiffies.h>
  49 #include <linux/i2c-pca-platform.h>
  50 #include <linux/delay.h>
  51 #include <linux/io.h>
  52 #include <asm/dma.h>
  53 #include <asm/bfin5xx_spi.h>
  54 #include <asm/portmux.h>
  55 #include <asm/dpmc.h>
  56 #include <asm/cacheflush.h>
  57 #include <linux/i2c.h>
  58
  59 /*
  60  * Name the Board for the /proc/cpuinfo
  61  */
  62 const char bfin_board_name[] = "Acvilon board";
  63
  64 #if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
  65 #include <linux/usb/isp1760.h>
  66 static struct resource bfin_isp1760_resources[] = {
  67         [0] = {
  68                .start = 0x20000000,
  69                .end = 0x20000000 + 0x000fffff,
  70                .flags = IORESOURCE_MEM,
  71                },
  72         [1] = {
  73                .start = IRQ_PF15,
  74                .end = IRQ_PF15,
  75                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
  76                },
  77 };
  78
  79 static struct isp1760_platform_data isp1760_priv = {
  80         .is_isp1761 = 0,
  81         .port1_disable = 0,
  82         .bus_width_16 = 1,
  83         .port1_otg = 0,
  84         .analog_oc = 0,
  85         .dack_polarity_high = 0,
  86         .dreq_polarity_high = 0,
  87 };
  88
  89 static struct platform_device bfin_isp1760_device = {
  90         .name = "isp1760-hcd",
  91         .id = 0,
  92         .dev = {
  93                 .platform_data = &isp1760_priv,
  94                 },
  95         .num_resources = ARRAY_SIZE(bfin_isp1760_resources),
  96         .resource = bfin_isp1760_resources,
  97 };
  98 #endif
  99
 100 static struct resource bfin_i2c_pca_resources[] = {
 101         {
 102          .name = "pca9564-regs",
 103          .start = 0x2C000000,
 104          .end = 0x2C000000 + 16,
 105          .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
 106          }, {
 107
 108              .start = IRQ_PF8,
 109              .end = IRQ_PF8,
 110              .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 111              },
 112 };
 113
 114 struct i2c_pca9564_pf_platform_data pca9564_platform_data = {
 115         .gpio = -1,
 116         .i2c_clock_speed = 330000,
 117         .timeout = HZ,
 118 };
 119
 120 /* PCA9564 I2C Bus driver */
 121 static struct platform_device bfin_i2c_pca_device = {
 122         .name = "i2c-pca-platform",
 123         .id = 0,
 124         .num_resources = ARRAY_SIZE(bfin_i2c_pca_resources),
 125         .resource = bfin_i2c_pca_resources,
 126         .dev = {
 127                 .platform_data = &pca9564_platform_data,
 128                 }
 129 };
 130
 131 /* I2C devices fitted. */
 132 static struct i2c_board_info acvilon_i2c_devs[] __initdata = {
 133         {
 134          I2C_BOARD_INFO("ds1339", 0x68),
 135          },
 136         {
 137          I2C_BOARD_INFO("tcn75", 0x49),
 138          },
 139 };
 140
 141 #if IS_ENABLED(CONFIG_MTD_PLATRAM)
 142 static struct platdata_mtd_ram mtd_ram_data = {
 143         .mapname = "rootfs(RAM)",
 144         .bankwidth = 4,
 145 };
 146
 147 static struct resource mtd_ram_resource = {
 148         .start = 0x4000000,
 149         .end = 0x5ffffff,
 150         .flags = IORESOURCE_MEM,
 151 };
 152
 153 static struct platform_device mtd_ram_device = {
 154         .name = "mtd-ram",
 155         .id = 0,
 156         .dev = {
 157                 .platform_data = &mtd_ram_data,
 158                 },
 159         .num_resources = 1,
 160         .resource = &mtd_ram_resource,
 161 };
 162 #endif
 163
 164 #if IS_ENABLED(CONFIG_SMSC911X)
 165 #include <linux/smsc911x.h>
 166 static struct resource smsc911x_resources[] = {
 167         {
 168          .name = "smsc911x-memory",
 169          .start = 0x28000000,
 170          .end = 0x28000000 + 0xFF,
 171          .flags = IORESOURCE_MEM,
 172          },
 173         {
 174          .start = IRQ_PF7,
 175          .end = IRQ_PF7,
 176          .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 177          },
 178 };
 179
 180 static struct smsc911x_platform_config smsc911x_config = {
 181         .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
 182         .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 183         .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
 184         .phy_interface = PHY_INTERFACE_MODE_MII,
 185 };
 186
 187 static struct platform_device smsc911x_device = {
 188         .name = "smsc911x",
 189         .id = 0,
 190         .num_resources = ARRAY_SIZE(smsc911x_resources),
 191         .resource = smsc911x_resources,
 192         .dev = {
 193                 .platform_data = &smsc911x_config,
 194                 },
 195 };
 196 #endif
 197
 198 #if IS_ENABLED(CONFIG_SERIAL_BFIN)
 199 #ifdef CONFIG_SERIAL_BFIN_UART0
 200 static struct resource bfin_uart0_resources[] = {
 201         {
 202          .start = BFIN_UART_THR,
 203          .end = BFIN_UART_GCTL + 2,
 204          .flags = IORESOURCE_MEM,
 205          },
 206         {
 207          .start = IRQ_UART_TX,
 208          .end = IRQ_UART_TX,
 209          .flags = IORESOURCE_IRQ,
 210          },
 211         {
 212          .start = IRQ_UART_RX,
 213          .end = IRQ_UART_RX,
 214          .flags = IORESOURCE_IRQ,
 215          },
 216         {
 217          .start = IRQ_UART_ERROR,
 218          .end = IRQ_UART_ERROR,
 219          .flags = IORESOURCE_IRQ,
 220          },
 221         {
 222          .start = CH_UART_TX,
 223          .end = CH_UART_TX,
 224          .flags = IORESOURCE_DMA,
 225          },
 226         {
 227          .start = CH_UART_RX,
 228          .end = CH_UART_RX,
 229          .flags = IORESOURCE_DMA,
 230          },
 231 };
 232
 233 static unsigned short bfin_uart0_peripherals[] = {
 234         P_UART0_TX, P_UART0_RX, 0
 235 };
 236
 237 static struct platform_device bfin_uart0_device = {
 238         .name = "bfin-uart",
 239         .id = 0,
 240         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
 241         .resource = bfin_uart0_resources,
 242         .dev = {
 243                 /* Passed to driver */
 244                 .platform_data = &bfin_uart0_peripherals,
 245                 },
 246 };
 247 #endif
 248 #endif
 249
 250 #if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
 251
 252 static struct mtd_partition bfin_plat_nand_partitions[] = {
 253         {
 254          .name = "params(nand)",
 255          .size = 32 * 1024 * 1024,
 256          .offset = 0,
 257          }, {
 258              .name = "userfs(nand)",
 259              .size = MTDPART_SIZ_FULL,
 260              .offset = MTDPART_OFS_APPEND,
 261              },
 262 };
 263
 264 #define BFIN_NAND_PLAT_CLE 2
 265 #define BFIN_NAND_PLAT_ALE 3
 266
 267 static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
 268                                     unsigned int ctrl)
 269 {
 270         struct nand_chip *this = mtd->priv;
 271
 272         if (cmd == NAND_CMD_NONE)
 273                 return;
 274
 275         if (ctrl & NAND_CLE)
 276                 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
 277         else
 278                 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
 279 }
 280
 281 #define BFIN_NAND_PLAT_READY GPIO_PF10
 282 static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
 283 {
 284         return gpio_get_value(BFIN_NAND_PLAT_READY);
 285 }
 286
 287 static struct platform_nand_data bfin_plat_nand_data = {
 288         .chip = {
 289                  .nr_chips = 1,
 290                  .chip_delay = 30,
 291                  .partitions = bfin_plat_nand_partitions,
 292                  .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
 293                  },
 294         .ctrl = {
 295                  .cmd_ctrl = bfin_plat_nand_cmd_ctrl,
 296                  .dev_ready = bfin_plat_nand_dev_ready,
 297                  },
 298 };
 299
 300 #define MAX(x, y) (x > y ? x : y)
 301 static struct resource bfin_plat_nand_resources = {
 302         .start = 0x24000000,
 303         .end = 0x24000000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
 304         .flags = IORESOURCE_MEM,
 305 };
 306
 307 static struct platform_device bfin_async_nand_device = {
 308         .name = "gen_nand",
 309         .id = -1,
 310         .num_resources = 1,
 311         .resource = &bfin_plat_nand_resources,
 312         .dev = {
 313                 .platform_data = &bfin_plat_nand_data,
 314                 },
 315 };
 316
 317 static void bfin_plat_nand_init(void)
 318 {
 319         gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
 320 }
 321 #else
 322 static void bfin_plat_nand_init(void)
 323 {
 324 }
 325 #endif
 326
 327 #if IS_ENABLED(CONFIG_MTD_DATAFLASH)
 328 static struct mtd_partition bfin_spi_dataflash_partitions[] = {
 329         {
 330          .name = "bootloader",
 331          .size = 0x4200,
 332          .offset = 0,
 333          .mask_flags = MTD_CAP_ROM},
 334         {
 335          .name = "u-boot",
 336          .size = 0x42000,
 337          .offset = MTDPART_OFS_APPEND,
 338          },
 339         {
 340          .name = "u-boot(params)",
 341          .size = 0x4200,
 342          .offset = MTDPART_OFS_APPEND,
 343          },
 344         {
 345          .name = "kernel",
 346          .size = 0x294000,
 347          .offset = MTDPART_OFS_APPEND,
 348          },
 349         {
 350          .name = "params",
 351          .size = 0x42000,
 352          .offset = MTDPART_OFS_APPEND,
 353          },
 354         {
 355          .name = "rootfs",
 356          .size = MTDPART_SIZ_FULL,
 357          .offset = MTDPART_OFS_APPEND,
 358          }
 359 };
 360
 361 static struct flash_platform_data bfin_spi_dataflash_data = {
 362         .name = "SPI Dataflash",
 363         .parts = bfin_spi_dataflash_partitions,
 364         .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
 365 };
 366
 367 /* DataFlash chip */
 368 static struct bfin5xx_spi_chip data_flash_chip_info = {
 369         .enable_dma = 0,        /* use dma transfer with this chip */
 370 };
 371 #endif
 372
 373 #if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 374 /* SPI (0) */
 375 static struct resource bfin_spi0_resource[] = {
 376         [0] = {
 377                .start = SPI0_REGBASE,
 378                .end = SPI0_REGBASE + 0xFF,
 379                .flags = IORESOURCE_MEM,
 380                },
 381         [1] = {
 382                .start = CH_SPI,
 383                .end = CH_SPI,
 384                .flags = IORESOURCE_DMA,
 385                },
 386         [2] = {
 387                .start = IRQ_SPI,
 388                .end = IRQ_SPI,
 389                .flags = IORESOURCE_IRQ,
 390                },
 391 };
 392
 393 /* SPI controller data */
 394 static struct bfin5xx_spi_master bfin_spi0_info = {
 395         .num_chipselect = 8,
 396         .enable_dma = 1,        /* master has the ability to do dma transfer */
 397         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 398 };
 399
 400 static struct platform_device bfin_spi0_device = {
 401         .name = "bfin-spi",
 402         .id = 0,                /* Bus number */
 403         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 404         .resource = bfin_spi0_resource,
 405         .dev = {
 406                 .platform_data = &bfin_spi0_info,       /* Passed to driver */
 407                 },
 408 };
 409 #endif
 410
 411 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 412 #if IS_ENABLED(CONFIG_SPI_SPIDEV)
 413         {
 414          .modalias = "spidev",
 415          .max_speed_hz = 3125000,       /* max spi clock (SCK) speed in HZ */
 416          .bus_num = 0,
 417          .chip_select = 3,
 418          },
 419 #endif
 420 #if IS_ENABLED(CONFIG_MTD_DATAFLASH)
 421         {                       /* DataFlash chip */
 422          .modalias = "mtd_dataflash",
 423          .max_speed_hz = 33250000,      /* max spi clock (SCK) speed in HZ */
 424          .bus_num = 0,          /* Framework bus number */
 425          .chip_select = 2,      /* Framework chip select */
 426          .platform_data = &bfin_spi_dataflash_data,
 427          .controller_data = &data_flash_chip_info,
 428          .mode = SPI_MODE_3,
 429          },
 430 #endif
 431 };
 432
 433 static struct resource bfin_gpios_resources = {
 434         .start = 31,
 435 /*      .end   = MAX_BLACKFIN_GPIOS - 1, */
 436         .end = 32,
 437         .flags = IORESOURCE_IRQ,
 438 };
 439
 440 static struct platform_device bfin_gpios_device = {
 441         .name = "simple-gpio",
 442         .id = -1,
 443         .num_resources = 1,
 444         .resource = &bfin_gpios_resources,
 445 };
 446
 447 static const unsigned int cclk_vlev_datasheet[] = {
 448         VRPAIR(VLEV_085, 250000000),
 449         VRPAIR(VLEV_090, 300000000),
 450         VRPAIR(VLEV_095, 313000000),
 451         VRPAIR(VLEV_100, 350000000),
 452         VRPAIR(VLEV_105, 400000000),
 453         VRPAIR(VLEV_110, 444000000),
 454         VRPAIR(VLEV_115, 450000000),
 455         VRPAIR(VLEV_120, 475000000),
 456         VRPAIR(VLEV_125, 500000000),
 457         VRPAIR(VLEV_130, 600000000),
 458 };
 459
 460 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
 461         .tuple_tab = cclk_vlev_datasheet,
 462         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
 463         .vr_settling_time = 25 /* us */ ,
 464 };
 465
 466 static struct platform_device bfin_dpmc = {
 467         .name = "bfin dpmc",
 468         .dev = {
 469                 .platform_data = &bfin_dmpc_vreg_data,
 470                 },
 471 };
 472
 473 static struct platform_device *acvilon_devices[] __initdata = {
 474         &bfin_dpmc,
 475
 476 #if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 477         &bfin_spi0_device,
 478 #endif
 479
 480 #if IS_ENABLED(CONFIG_SERIAL_BFIN)
 481 #ifdef CONFIG_SERIAL_BFIN_UART0
 482         &bfin_uart0_device,
 483 #endif
 484 #endif
 485
 486         &bfin_gpios_device,
 487
 488 #if IS_ENABLED(CONFIG_SMSC911X)
 489         &smsc911x_device,
 490 #endif
 491
 492         &bfin_i2c_pca_device,
 493
 494 #if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
 495         &bfin_async_nand_device,
 496 #endif
 497
 498 #if IS_ENABLED(CONFIG_MTD_PLATRAM)
 499         &mtd_ram_device,
 500 #endif
 501
 502 };
 503
 504 static int __init acvilon_init(void)
 505 {
 506         int ret;
 507
 508         printk(KERN_INFO "%s(): registering device resources\n", __func__);
 509
 510         bfin_plat_nand_init();
 511         ret =
 512             platform_add_devices(acvilon_devices, ARRAY_SIZE(acvilon_devices));
 513         if (ret < 0)
 514                 return ret;
 515
 516         i2c_register_board_info(0, acvilon_i2c_devs,
 517                                 ARRAY_SIZE(acvilon_i2c_devs));
 518
 519         bfin_write_FIO0_FLAG_C(1 << 14);
 520         msleep(5);
 521         bfin_write_FIO0_FLAG_S(1 << 14);
 522
 523         spi_register_board_info(bfin_spi_board_info,
 524                                 ARRAY_SIZE(bfin_spi_board_info));
 525         return 0;
 526 }
 527
 528 arch_initcall(acvilon_init);
 529
 530 static struct platform_device *acvilon_early_devices[] __initdata = {
 531 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
 532 #ifdef CONFIG_SERIAL_BFIN_UART0
 533         &bfin_uart0_device,
 534 #endif
 535 #endif
 536 };
 537
 538 void __init native_machine_early_platform_add_devices(void)
 539 {
 540         printk(KERN_INFO "register early platform devices\n");
 541         early_platform_add_devices(acvilon_early_devices,
 542                                    ARRAY_SIZE(acvilon_early_devices));
 543 }