of: MSI: Simplify irqdomain lookup
[linux/fpc-iii.git] / arch / mips / cavium-octeon / executive / cvmx-helper-sgmii.c
blob6f9609e63a65af18bc36c69072a71b631e408216
1 /***********************license start***************
2 * Author: Cavium Networks
4 * Contact: support@caviumnetworks.com
5 * This file is part of the OCTEON SDK
7 * Copyright (c) 2003-2008 Cavium Networks
9 * This file is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License, Version 2, as
11 * published by the Free Software Foundation.
13 * This file is distributed in the hope that it will be useful, but
14 * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
15 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
16 * NONINFRINGEMENT. See the GNU General Public License for more
17 * details.
19 * You should have received a copy of the GNU General Public License
20 * along with this file; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 * or visit http://www.gnu.org/licenses/.
24 * This file may also be available under a different license from Cavium.
25 * Contact Cavium Networks for more information
26 ***********************license end**************************************/
29 * Functions for SGMII initialization, configuration,
30 * and monitoring.
33 #include <asm/octeon/octeon.h>
35 #include <asm/octeon/cvmx-config.h>
37 #include <asm/octeon/cvmx-mdio.h>
38 #include <asm/octeon/cvmx-helper.h>
39 #include <asm/octeon/cvmx-helper-board.h>
41 #include <asm/octeon/cvmx-gmxx-defs.h>
42 #include <asm/octeon/cvmx-pcsx-defs.h>
44 void __cvmx_interrupt_gmxx_enable(int interface);
45 void __cvmx_interrupt_pcsx_intx_en_reg_enable(int index, int block);
46 void __cvmx_interrupt_pcsxx_int_en_reg_enable(int index);
48 /**
49 * Perform initialization required only once for an SGMII port.
51 * @interface: Interface to init
52 * @index: Index of prot on the interface
54 * Returns Zero on success, negative on failure
56 static int __cvmx_helper_sgmii_hardware_init_one_time(int interface, int index)
58 const uint64_t clock_mhz = cvmx_sysinfo_get()->cpu_clock_hz / 1000000;
59 union cvmx_pcsx_miscx_ctl_reg pcs_misc_ctl_reg;
60 union cvmx_pcsx_linkx_timer_count_reg pcsx_linkx_timer_count_reg;
61 union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg;
63 /* Disable GMX */
64 gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
65 gmxx_prtx_cfg.s.en = 0;
66 cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64);
69 * Write PCS*_LINK*_TIMER_COUNT_REG[COUNT] with the
70 * appropriate value. 1000BASE-X specifies a 10ms
71 * interval. SGMII specifies a 1.6ms interval.
73 pcs_misc_ctl_reg.u64 =
74 cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface));
75 pcsx_linkx_timer_count_reg.u64 =
76 cvmx_read_csr(CVMX_PCSX_LINKX_TIMER_COUNT_REG(index, interface));
77 if (pcs_misc_ctl_reg.s.mode) {
78 /* 1000BASE-X */
79 pcsx_linkx_timer_count_reg.s.count =
80 (10000ull * clock_mhz) >> 10;
81 } else {
82 /* SGMII */
83 pcsx_linkx_timer_count_reg.s.count =
84 (1600ull * clock_mhz) >> 10;
86 cvmx_write_csr(CVMX_PCSX_LINKX_TIMER_COUNT_REG(index, interface),
87 pcsx_linkx_timer_count_reg.u64);
90 * Write the advertisement register to be used as the
91 * tx_Config_Reg<D15:D0> of the autonegotiation. In
92 * 1000BASE-X mode, tx_Config_Reg<D15:D0> is PCS*_AN*_ADV_REG.
93 * In SGMII PHY mode, tx_Config_Reg<D15:D0> is
94 * PCS*_SGM*_AN_ADV_REG. In SGMII MAC mode,
95 * tx_Config_Reg<D15:D0> is the fixed value 0x4001, so this
96 * step can be skipped.
98 if (pcs_misc_ctl_reg.s.mode) {
99 /* 1000BASE-X */
100 union cvmx_pcsx_anx_adv_reg pcsx_anx_adv_reg;
101 pcsx_anx_adv_reg.u64 =
102 cvmx_read_csr(CVMX_PCSX_ANX_ADV_REG(index, interface));
103 pcsx_anx_adv_reg.s.rem_flt = 0;
104 pcsx_anx_adv_reg.s.pause = 3;
105 pcsx_anx_adv_reg.s.hfd = 1;
106 pcsx_anx_adv_reg.s.fd = 1;
107 cvmx_write_csr(CVMX_PCSX_ANX_ADV_REG(index, interface),
108 pcsx_anx_adv_reg.u64);
109 } else {
110 union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg;
111 pcsx_miscx_ctl_reg.u64 =
112 cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface));
113 if (pcsx_miscx_ctl_reg.s.mac_phy) {
114 /* PHY Mode */
115 union cvmx_pcsx_sgmx_an_adv_reg pcsx_sgmx_an_adv_reg;
116 pcsx_sgmx_an_adv_reg.u64 =
117 cvmx_read_csr(CVMX_PCSX_SGMX_AN_ADV_REG
118 (index, interface));
119 pcsx_sgmx_an_adv_reg.s.link = 1;
120 pcsx_sgmx_an_adv_reg.s.dup = 1;
121 pcsx_sgmx_an_adv_reg.s.speed = 2;
122 cvmx_write_csr(CVMX_PCSX_SGMX_AN_ADV_REG
123 (index, interface),
124 pcsx_sgmx_an_adv_reg.u64);
125 } else {
126 /* MAC Mode - Nothing to do */
129 return 0;
133 * Initialize the SERTES link for the first time or after a loss
134 * of link.
136 * @interface: Interface to init
137 * @index: Index of prot on the interface
139 * Returns Zero on success, negative on failure
141 static int __cvmx_helper_sgmii_hardware_init_link(int interface, int index)
143 union cvmx_pcsx_mrx_control_reg control_reg;
146 * Take PCS through a reset sequence.
147 * PCS*_MR*_CONTROL_REG[PWR_DN] should be cleared to zero.
148 * Write PCS*_MR*_CONTROL_REG[RESET]=1 (while not changing the
149 * value of the other PCS*_MR*_CONTROL_REG bits). Read
150 * PCS*_MR*_CONTROL_REG[RESET] until it changes value to
151 * zero.
153 control_reg.u64 =
154 cvmx_read_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface));
155 if (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) {
156 control_reg.s.reset = 1;
157 cvmx_write_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface),
158 control_reg.u64);
159 if (CVMX_WAIT_FOR_FIELD64
160 (CVMX_PCSX_MRX_CONTROL_REG(index, interface),
161 union cvmx_pcsx_mrx_control_reg, reset, ==, 0, 10000)) {
162 cvmx_dprintf("SGMII%d: Timeout waiting for port %d "
163 "to finish reset\n",
164 interface, index);
165 return -1;
170 * Write PCS*_MR*_CONTROL_REG[RST_AN]=1 to ensure a fresh
171 * sgmii negotiation starts.
173 control_reg.s.rst_an = 1;
174 control_reg.s.an_en = 1;
175 control_reg.s.pwr_dn = 0;
176 cvmx_write_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface),
177 control_reg.u64);
180 * Wait for PCS*_MR*_STATUS_REG[AN_CPT] to be set, indicating
181 * that sgmii autonegotiation is complete. In MAC mode this
182 * isn't an ethernet link, but a link between Octeon and the
183 * PHY.
185 if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) &&
186 CVMX_WAIT_FOR_FIELD64(CVMX_PCSX_MRX_STATUS_REG(index, interface),
187 union cvmx_pcsx_mrx_status_reg, an_cpt, ==, 1,
188 10000)) {
189 /* cvmx_dprintf("SGMII%d: Port %d link timeout\n", interface, index); */
190 return -1;
192 return 0;
196 * Configure an SGMII link to the specified speed after the SERTES
197 * link is up.
199 * @interface: Interface to init
200 * @index: Index of prot on the interface
201 * @link_info: Link state to configure
203 * Returns Zero on success, negative on failure
205 static int __cvmx_helper_sgmii_hardware_init_link_speed(int interface,
206 int index,
207 cvmx_helper_link_info_t
208 link_info)
210 int is_enabled;
211 union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg;
212 union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg;
214 /* Disable GMX before we make any changes. Remember the enable state */
215 gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
216 is_enabled = gmxx_prtx_cfg.s.en;
217 gmxx_prtx_cfg.s.en = 0;
218 cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64);
220 /* Wait for GMX to be idle */
221 if (CVMX_WAIT_FOR_FIELD64
222 (CVMX_GMXX_PRTX_CFG(index, interface), union cvmx_gmxx_prtx_cfg,
223 rx_idle, ==, 1, 10000)
224 || CVMX_WAIT_FOR_FIELD64(CVMX_GMXX_PRTX_CFG(index, interface),
225 union cvmx_gmxx_prtx_cfg, tx_idle, ==, 1,
226 10000)) {
227 cvmx_dprintf
228 ("SGMII%d: Timeout waiting for port %d to be idle\n",
229 interface, index);
230 return -1;
233 /* Read GMX CFG again to make sure the disable completed */
234 gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
237 * Get the misc control for PCS. We will need to set the
238 * duplication amount.
240 pcsx_miscx_ctl_reg.u64 =
241 cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface));
244 * Use GMXENO to force the link down if the status we get says
245 * it should be down.
247 pcsx_miscx_ctl_reg.s.gmxeno = !link_info.s.link_up;
249 /* Only change the duplex setting if the link is up */
250 if (link_info.s.link_up)
251 gmxx_prtx_cfg.s.duplex = link_info.s.full_duplex;
253 /* Do speed based setting for GMX */
254 switch (link_info.s.speed) {
255 case 10:
256 gmxx_prtx_cfg.s.speed = 0;
257 gmxx_prtx_cfg.s.speed_msb = 1;
258 gmxx_prtx_cfg.s.slottime = 0;
259 /* Setting from GMX-603 */
260 pcsx_miscx_ctl_reg.s.samp_pt = 25;
261 cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 64);
262 cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0);
263 break;
264 case 100:
265 gmxx_prtx_cfg.s.speed = 0;
266 gmxx_prtx_cfg.s.speed_msb = 0;
267 gmxx_prtx_cfg.s.slottime = 0;
268 pcsx_miscx_ctl_reg.s.samp_pt = 0x5;
269 cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 64);
270 cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0);
271 break;
272 case 1000:
273 gmxx_prtx_cfg.s.speed = 1;
274 gmxx_prtx_cfg.s.speed_msb = 0;
275 gmxx_prtx_cfg.s.slottime = 1;
276 pcsx_miscx_ctl_reg.s.samp_pt = 1;
277 cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 512);
278 cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 8192);
279 break;
280 default:
281 break;
284 /* Write the new misc control for PCS */
285 cvmx_write_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface),
286 pcsx_miscx_ctl_reg.u64);
288 /* Write the new GMX settings with the port still disabled */
289 cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64);
291 /* Read GMX CFG again to make sure the config completed */
292 gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
294 /* Restore the enabled / disabled state */
295 gmxx_prtx_cfg.s.en = is_enabled;
296 cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64);
298 return 0;
302 * Bring up the SGMII interface to be ready for packet I/O but
303 * leave I/O disabled using the GMX override. This function
304 * follows the bringup documented in 10.6.3 of the manual.
306 * @interface: Interface to bringup
307 * @num_ports: Number of ports on the interface
309 * Returns Zero on success, negative on failure
311 static int __cvmx_helper_sgmii_hardware_init(int interface, int num_ports)
313 int index;
315 __cvmx_helper_setup_gmx(interface, num_ports);
317 for (index = 0; index < num_ports; index++) {
318 int ipd_port = cvmx_helper_get_ipd_port(interface, index);
319 __cvmx_helper_sgmii_hardware_init_one_time(interface, index);
320 /* Linux kernel driver will call ....link_set with the
321 * proper link state. In the simulator there is no
322 * link state polling and hence it is set from
323 * here.
325 if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM)
326 __cvmx_helper_sgmii_link_set(ipd_port,
327 __cvmx_helper_sgmii_link_get(ipd_port));
330 return 0;
333 int __cvmx_helper_sgmii_enumerate(int interface)
335 return 4;
338 * Probe a SGMII interface and determine the number of ports
339 * connected to it. The SGMII interface should still be down after
340 * this call.
342 * @interface: Interface to probe
344 * Returns Number of ports on the interface. Zero to disable.
346 int __cvmx_helper_sgmii_probe(int interface)
348 union cvmx_gmxx_inf_mode mode;
351 * Due to errata GMX-700 on CN56XXp1.x and CN52XXp1.x, the
352 * interface needs to be enabled before IPD otherwise per port
353 * backpressure may not work properly
355 mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
356 mode.s.en = 1;
357 cvmx_write_csr(CVMX_GMXX_INF_MODE(interface), mode.u64);
358 return __cvmx_helper_sgmii_enumerate(interface);
362 * Bringup and enable a SGMII interface. After this call packet
363 * I/O should be fully functional. This is called with IPD
364 * enabled but PKO disabled.
366 * @interface: Interface to bring up
368 * Returns Zero on success, negative on failure
370 int __cvmx_helper_sgmii_enable(int interface)
372 int num_ports = cvmx_helper_ports_on_interface(interface);
373 int index;
375 __cvmx_helper_sgmii_hardware_init(interface, num_ports);
377 for (index = 0; index < num_ports; index++) {
378 union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg;
379 gmxx_prtx_cfg.u64 =
380 cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
381 gmxx_prtx_cfg.s.en = 1;
382 cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface),
383 gmxx_prtx_cfg.u64);
384 __cvmx_interrupt_pcsx_intx_en_reg_enable(index, interface);
386 __cvmx_interrupt_pcsxx_int_en_reg_enable(interface);
387 __cvmx_interrupt_gmxx_enable(interface);
388 return 0;
392 * Return the link state of an IPD/PKO port as returned by
393 * auto negotiation. The result of this function may not match
394 * Octeon's link config if auto negotiation has changed since
395 * the last call to cvmx_helper_link_set().
397 * @ipd_port: IPD/PKO port to query
399 * Returns Link state
401 cvmx_helper_link_info_t __cvmx_helper_sgmii_link_get(int ipd_port)
403 cvmx_helper_link_info_t result;
404 union cvmx_pcsx_miscx_ctl_reg pcs_misc_ctl_reg;
405 int interface = cvmx_helper_get_interface_num(ipd_port);
406 int index = cvmx_helper_get_interface_index_num(ipd_port);
407 union cvmx_pcsx_mrx_control_reg pcsx_mrx_control_reg;
409 result.u64 = 0;
411 if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) {
412 /* The simulator gives you a simulated 1Gbps full duplex link */
413 result.s.link_up = 1;
414 result.s.full_duplex = 1;
415 result.s.speed = 1000;
416 return result;
419 pcsx_mrx_control_reg.u64 =
420 cvmx_read_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface));
421 if (pcsx_mrx_control_reg.s.loopbck1) {
422 /* Force 1Gbps full duplex link for internal loopback */
423 result.s.link_up = 1;
424 result.s.full_duplex = 1;
425 result.s.speed = 1000;
426 return result;
429 pcs_misc_ctl_reg.u64 =
430 cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface));
431 if (pcs_misc_ctl_reg.s.mode) {
432 /* 1000BASE-X */
433 /* FIXME */
434 } else {
435 union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg;
436 pcsx_miscx_ctl_reg.u64 =
437 cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface));
438 if (pcsx_miscx_ctl_reg.s.mac_phy) {
439 /* PHY Mode */
440 union cvmx_pcsx_mrx_status_reg pcsx_mrx_status_reg;
441 union cvmx_pcsx_anx_results_reg pcsx_anx_results_reg;
444 * Don't bother continuing if the SERTES low
445 * level link is down
447 pcsx_mrx_status_reg.u64 =
448 cvmx_read_csr(CVMX_PCSX_MRX_STATUS_REG
449 (index, interface));
450 if (pcsx_mrx_status_reg.s.lnk_st == 0) {
451 if (__cvmx_helper_sgmii_hardware_init_link
452 (interface, index) != 0)
453 return result;
456 /* Read the autoneg results */
457 pcsx_anx_results_reg.u64 =
458 cvmx_read_csr(CVMX_PCSX_ANX_RESULTS_REG
459 (index, interface));
460 if (pcsx_anx_results_reg.s.an_cpt) {
462 * Auto negotiation is complete. Set
463 * status accordingly.
465 result.s.full_duplex =
466 pcsx_anx_results_reg.s.dup;
467 result.s.link_up =
468 pcsx_anx_results_reg.s.link_ok;
469 switch (pcsx_anx_results_reg.s.spd) {
470 case 0:
471 result.s.speed = 10;
472 break;
473 case 1:
474 result.s.speed = 100;
475 break;
476 case 2:
477 result.s.speed = 1000;
478 break;
479 default:
480 result.s.speed = 0;
481 result.s.link_up = 0;
482 break;
484 } else {
486 * Auto negotiation isn't
487 * complete. Return link down.
489 result.s.speed = 0;
490 result.s.link_up = 0;
492 } else { /* MAC Mode */
494 result = __cvmx_helper_board_link_get(ipd_port);
497 return result;
501 * Configure an IPD/PKO port for the specified link state. This
502 * function does not influence auto negotiation at the PHY level.
503 * The passed link state must always match the link state returned
504 * by cvmx_helper_link_get(). It is normally best to use
505 * cvmx_helper_link_autoconf() instead.
507 * @ipd_port: IPD/PKO port to configure
508 * @link_info: The new link state
510 * Returns Zero on success, negative on failure
512 int __cvmx_helper_sgmii_link_set(int ipd_port,
513 cvmx_helper_link_info_t link_info)
515 int interface = cvmx_helper_get_interface_num(ipd_port);
516 int index = cvmx_helper_get_interface_index_num(ipd_port);
517 __cvmx_helper_sgmii_hardware_init_link(interface, index);
518 return __cvmx_helper_sgmii_hardware_init_link_speed(interface, index,
519 link_info);
523 * Configure a port for internal and/or external loopback. Internal
524 * loopback causes packets sent by the port to be received by
525 * Octeon. External loopback causes packets received from the wire to
526 * sent out again.
528 * @ipd_port: IPD/PKO port to loopback.
529 * @enable_internal:
530 * Non zero if you want internal loopback
531 * @enable_external:
532 * Non zero if you want external loopback
534 * Returns Zero on success, negative on failure.
536 int __cvmx_helper_sgmii_configure_loopback(int ipd_port, int enable_internal,
537 int enable_external)
539 int interface = cvmx_helper_get_interface_num(ipd_port);
540 int index = cvmx_helper_get_interface_index_num(ipd_port);
541 union cvmx_pcsx_mrx_control_reg pcsx_mrx_control_reg;
542 union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg;
544 pcsx_mrx_control_reg.u64 =
545 cvmx_read_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface));
546 pcsx_mrx_control_reg.s.loopbck1 = enable_internal;
547 cvmx_write_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface),
548 pcsx_mrx_control_reg.u64);
550 pcsx_miscx_ctl_reg.u64 =
551 cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface));
552 pcsx_miscx_ctl_reg.s.loopbck2 = enable_external;
553 cvmx_write_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface),
554 pcsx_miscx_ctl_reg.u64);
556 __cvmx_helper_sgmii_hardware_init_link(interface, index);
557 return 0;