2 * Copyright (C) 2013 Imagination Technologies
3 * Author: Paul Burton <paul.burton@imgtec.com>
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2 of the License, or (at your
8 * option) any later version.
11 #include <linux/errno.h>
12 #include <linux/percpu.h>
13 #include <linux/spinlock.h>
15 #include <asm/mips-cm.h>
16 #include <asm/mipsregs.h>
18 void __iomem
*mips_cm_base
;
19 void __iomem
*mips_cm_l2sync_base
;
22 static char *cm2_tr
[8] = {
23 "mem", "gcr", "gic", "mmio",
24 "0x04", "cpc", "0x06", "0x07"
27 /* CM3 Tag ECC transation type */
28 static char *cm3_tr
[16] = {
35 [0x6] = "IReqNoRespDat",
36 [0x7] = "IReqWRespDat",
38 [0x9] = "RespDataFol",
40 [0xb] = "RespDataOnly",
41 [0xc] = "IRespNoData",
42 [0xd] = "IRespDataFol",
44 [0xf] = "IRespDataOnly"
47 static char *cm2_cmd
[32] = {
49 [0x01] = "Legacy Write",
50 [0x02] = "Legacy Read",
56 [0x08] = "Coherent Read Own",
57 [0x09] = "Coherent Read Share",
58 [0x0a] = "Coherent Read Discard",
59 [0x0b] = "Coherent Ready Share Always",
60 [0x0c] = "Coherent Upgrade",
61 [0x0d] = "Coherent Writeback",
64 [0x10] = "Coherent Copyback",
65 [0x11] = "Coherent Copyback Invalidate",
66 [0x12] = "Coherent Invalidate",
67 [0x13] = "Coherent Write Invalidate",
68 [0x14] = "Coherent Completion Sync",
82 /* CM3 Tag ECC command type */
83 static char *cm3_cmd
[16] = {
84 [0x0] = "Legacy Read",
85 [0x1] = "Legacy Write",
86 [0x2] = "Coherent Read Own",
87 [0x3] = "Coherent Read Share",
88 [0x4] = "Coherent Read Discard",
89 [0x5] = "Coherent Evicted",
90 [0x6] = "Coherent Upgrade",
91 [0x7] = "Coherent Upgrade for Store Conditional",
92 [0x8] = "Coherent Writeback",
93 [0x9] = "Coherent Write Invalidate",
102 /* CM3 Tag ECC command group */
103 static char *cm3_cmd_group
[8] = {
114 static char *cm2_core
[8] = {
115 "Invalid/OK", "Invalid/Data",
116 "Shared/OK", "Shared/Data",
117 "Modified/OK", "Modified/Data",
118 "Exclusive/OK", "Exclusive/Data"
121 static char *cm2_causes
[32] = {
122 "None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR",
123 "COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07",
124 "0x08", "0x09", "0x0a", "0x0b",
125 "0x0c", "0x0d", "0x0e", "0x0f",
126 "0x10", "0x11", "0x12", "0x13",
127 "0x14", "0x15", "0x16", "INTVN_WR_ERR",
128 "INTVN_RD_ERR", "0x19", "0x1a", "0x1b",
129 "0x1c", "0x1d", "0x1e", "0x1f"
132 static char *cm3_causes
[32] = {
133 "0x0", "MP_CORRECTABLE_ECC_ERR", "MP_REQUEST_DECODE_ERR",
134 "MP_UNCORRECTABLE_ECC_ERR", "MP_PARITY_ERR", "MP_COHERENCE_ERR",
135 "CMBIU_REQUEST_DECODE_ERR", "CMBIU_PARITY_ERR", "CMBIU_AXI_RESP_ERR",
136 "0x9", "RBI_BUS_ERR", "0xb", "0xc", "0xd", "0xe", "0xf", "0x10",
137 "0x11", "0x12", "0x13", "0x14", "0x15", "0x16", "0x17", "0x18",
138 "0x19", "0x1a", "0x1b", "0x1c", "0x1d", "0x1e", "0x1f"
141 static DEFINE_PER_CPU_ALIGNED(spinlock_t
, cm_core_lock
);
142 static DEFINE_PER_CPU_ALIGNED(unsigned long, cm_core_lock_flags
);
144 phys_addr_t
__mips_cm_phys_base(void)
146 u32 config3
= read_c0_config3();
149 /* Check the CMGCRBase register is implemented */
150 if (!(config3
& MIPS_CONF3_CMGCR
))
153 /* Read the address from CMGCRBase */
154 cmgcr
= read_c0_cmgcrbase();
155 return (cmgcr
& MIPS_CMGCRF_BASE
) << (36 - 32);
158 phys_addr_t
mips_cm_phys_base(void)
159 __attribute__((weak
, alias("__mips_cm_phys_base")));
161 phys_addr_t
__mips_cm_l2sync_phys_base(void)
166 * If the L2-only sync region is already enabled then leave it at it's
169 base_reg
= read_gcr_l2_only_sync_base();
170 if (base_reg
& CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_MSK
)
171 return base_reg
& CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_MSK
;
173 /* Default to following the CM */
174 return mips_cm_phys_base() + MIPS_CM_GCR_SIZE
;
177 phys_addr_t
mips_cm_l2sync_phys_base(void)
178 __attribute__((weak
, alias("__mips_cm_l2sync_phys_base")));
180 static void mips_cm_probe_l2sync(void)
185 /* L2-only sync was introduced with CM major revision 6 */
186 major_rev
= (read_gcr_rev() & CM_GCR_REV_MAJOR_MSK
) >>
187 CM_GCR_REV_MAJOR_SHF
;
191 /* Find a location for the L2 sync region */
192 addr
= mips_cm_l2sync_phys_base();
193 BUG_ON((addr
& CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_MSK
) != addr
);
197 /* Set the region base address & enable it */
198 write_gcr_l2_only_sync_base(addr
| CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_MSK
);
201 mips_cm_l2sync_base
= ioremap_nocache(addr
, MIPS_CM_L2SYNC_SIZE
);
204 int mips_cm_probe(void)
211 * No need to probe again if we have already been
217 addr
= mips_cm_phys_base();
218 BUG_ON((addr
& CM_GCR_BASE_GCRBASE_MSK
) != addr
);
222 mips_cm_base
= ioremap_nocache(addr
, MIPS_CM_GCR_SIZE
);
226 /* sanity check that we're looking at a CM */
227 base_reg
= read_gcr_base();
228 if ((base_reg
& CM_GCR_BASE_GCRBASE_MSK
) != addr
) {
229 pr_err("GCRs appear to have been moved (expected them at 0x%08lx)!\n",
230 (unsigned long)addr
);
235 /* set default target to memory */
236 base_reg
&= ~CM_GCR_BASE_CMDEFTGT_MSK
;
237 base_reg
|= CM_GCR_BASE_CMDEFTGT_MEM
;
238 write_gcr_base(base_reg
);
240 /* disable CM regions */
241 write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR_MSK
);
242 write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK
);
243 write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR_MSK
);
244 write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK
);
245 write_gcr_reg2_base(CM_GCR_REGn_BASE_BASEADDR_MSK
);
246 write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK
);
247 write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR_MSK
);
248 write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK
);
250 /* probe for an L2-only sync region */
251 mips_cm_probe_l2sync();
253 /* determine register width for this CM */
254 mips_cm_is64
= config_enabled(CONFIG_64BIT
) && (mips_cm_revision() >= CM_REV_CM3
);
256 for_each_possible_cpu(cpu
)
257 spin_lock_init(&per_cpu(cm_core_lock
, cpu
));
262 void mips_cm_lock_other(unsigned int core
, unsigned int vp
)
268 curr_core
= current_cpu_data
.core
;
269 spin_lock_irqsave(&per_cpu(cm_core_lock
, curr_core
),
270 per_cpu(cm_core_lock_flags
, curr_core
));
272 if (mips_cm_revision() >= CM_REV_CM3
) {
273 val
= core
<< CM3_GCR_Cx_OTHER_CORE_SHF
;
274 val
|= vp
<< CM3_GCR_Cx_OTHER_VP_SHF
;
277 val
= core
<< CM_GCR_Cx_OTHER_CORENUM_SHF
;
280 write_gcr_cl_other(val
);
283 * Ensure the core-other region reflects the appropriate core &
284 * VP before any accesses to it occur.
289 void mips_cm_unlock_other(void)
291 unsigned curr_core
= current_cpu_data
.core
;
293 spin_unlock_irqrestore(&per_cpu(cm_core_lock
, curr_core
),
294 per_cpu(cm_core_lock_flags
, curr_core
));
298 void mips_cm_error_report(void)
300 u64 cm_error
, cm_addr
, cm_other
;
301 unsigned long revision
;
305 if (!mips_cm_present())
308 revision
= mips_cm_revision();
310 if (revision
< CM_REV_CM3
) { /* CM2 */
311 cm_error
= read_gcr_error_cause();
312 cm_addr
= read_gcr_error_addr();
313 cm_other
= read_gcr_error_mult();
314 cause
= cm_error
>> CM_GCR_ERROR_CAUSE_ERRTYPE_SHF
;
315 ocause
= cm_other
>> CM_GCR_ERROR_MULT_ERR2ND_SHF
;
321 unsigned long cca_bits
= (cm_error
>> 15) & 7;
322 unsigned long tr_bits
= (cm_error
>> 12) & 7;
323 unsigned long cmd_bits
= (cm_error
>> 7) & 0x1f;
324 unsigned long stag_bits
= (cm_error
>> 3) & 15;
325 unsigned long sport_bits
= (cm_error
>> 0) & 7;
327 snprintf(buf
, sizeof(buf
),
328 "CCA=%lu TR=%s MCmd=%s STag=%lu "
329 "SPort=%lu\n", cca_bits
, cm2_tr
[tr_bits
],
330 cm2_cmd
[cmd_bits
], stag_bits
, sport_bits
);
332 /* glob state & sresp together */
333 unsigned long c3_bits
= (cm_error
>> 18) & 7;
334 unsigned long c2_bits
= (cm_error
>> 15) & 7;
335 unsigned long c1_bits
= (cm_error
>> 12) & 7;
336 unsigned long c0_bits
= (cm_error
>> 9) & 7;
337 unsigned long sc_bit
= (cm_error
>> 8) & 1;
338 unsigned long cmd_bits
= (cm_error
>> 3) & 0x1f;
339 unsigned long sport_bits
= (cm_error
>> 0) & 7;
341 snprintf(buf
, sizeof(buf
),
342 "C3=%s C2=%s C1=%s C0=%s SC=%s "
343 "MCmd=%s SPort=%lu\n",
344 cm2_core
[c3_bits
], cm2_core
[c2_bits
],
345 cm2_core
[c1_bits
], cm2_core
[c0_bits
],
346 sc_bit
? "True" : "False",
347 cm2_cmd
[cmd_bits
], sport_bits
);
349 pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error
,
350 cm2_causes
[cause
], buf
);
351 pr_err("CM_ADDR =%08llx\n", cm_addr
);
352 pr_err("CM_OTHER=%08llx %s\n", cm_other
, cm2_causes
[ocause
]);
354 ulong core_id_bits
, vp_id_bits
, cmd_bits
, cmd_group_bits
;
355 ulong cm3_cca_bits
, mcp_bits
, cm3_tr_bits
, sched_bit
;
357 cm_error
= read64_gcr_error_cause();
358 cm_addr
= read64_gcr_error_addr();
359 cm_other
= read64_gcr_error_mult();
360 cause
= cm_error
>> CM3_GCR_ERROR_CAUSE_ERRTYPE_SHF
;
361 ocause
= cm_other
>> CM_GCR_ERROR_MULT_ERR2ND_SHF
;
366 /* Used by cause == {1,2,3} */
367 core_id_bits
= (cm_error
>> 22) & 0xf;
368 vp_id_bits
= (cm_error
>> 18) & 0xf;
369 cmd_bits
= (cm_error
>> 14) & 0xf;
370 cmd_group_bits
= (cm_error
>> 11) & 0xf;
371 cm3_cca_bits
= (cm_error
>> 8) & 7;
372 mcp_bits
= (cm_error
>> 5) & 0xf;
373 cm3_tr_bits
= (cm_error
>> 1) & 0xf;
374 sched_bit
= cm_error
& 0x1;
376 if (cause
== 1 || cause
== 3) { /* Tag ECC */
377 unsigned long tag_ecc
= (cm_error
>> 57) & 0x1;
378 unsigned long tag_way_bits
= (cm_error
>> 29) & 0xffff;
379 unsigned long dword_bits
= (cm_error
>> 49) & 0xff;
380 unsigned long data_way_bits
= (cm_error
>> 45) & 0xf;
381 unsigned long data_sets_bits
= (cm_error
>> 29) & 0xfff;
382 unsigned long bank_bit
= (cm_error
>> 28) & 0x1;
383 snprintf(buf
, sizeof(buf
),
384 "%s ECC Error: Way=%lu (DWORD=%lu, Sets=%lu)"
385 "Bank=%lu CoreID=%lu VPID=%lu Command=%s"
386 "Command Group=%s CCA=%lu MCP=%d"
387 "Transaction type=%s Scheduler=%lu\n",
388 tag_ecc
? "TAG" : "DATA",
389 tag_ecc
? (unsigned long)ffs(tag_way_bits
) - 1 :
390 data_way_bits
, bank_bit
, dword_bits
,
392 core_id_bits
, vp_id_bits
,
394 cm3_cmd_group
[cmd_group_bits
],
395 cm3_cca_bits
, 1 << mcp_bits
,
396 cm3_tr
[cm3_tr_bits
], sched_bit
);
397 } else if (cause
== 2) {
398 unsigned long data_error_type
= (cm_error
>> 41) & 0xfff;
399 unsigned long data_decode_cmd
= (cm_error
>> 37) & 0xf;
400 unsigned long data_decode_group
= (cm_error
>> 34) & 0x7;
401 unsigned long data_decode_destination_id
= (cm_error
>> 28) & 0x3f;
403 snprintf(buf
, sizeof(buf
),
404 "Decode Request Error: Type=%lu, Command=%lu"
405 "Command Group=%lu Destination ID=%lu"
406 "CoreID=%lu VPID=%lu Command=%s"
407 "Command Group=%s CCA=%lu MCP=%d"
408 "Transaction type=%s Scheduler=%lu\n",
409 data_error_type
, data_decode_cmd
,
410 data_decode_group
, data_decode_destination_id
,
411 core_id_bits
, vp_id_bits
,
413 cm3_cmd_group
[cmd_group_bits
],
414 cm3_cca_bits
, 1 << mcp_bits
,
415 cm3_tr
[cm3_tr_bits
], sched_bit
);
420 pr_err("CM_ERROR=%llx %s <%s>\n", cm_error
,
421 cm3_causes
[cause
], buf
);
422 pr_err("CM_ADDR =%llx\n", cm_addr
);
423 pr_err("CM_OTHER=%llx %s\n", cm_other
, cm3_causes
[ocause
]);
426 /* reprime cause register */
427 write_gcr_error_cause(0);