arch/powerpc/boot/dts/fsl/p2041rdb.dts

   1 /*
   2  * P2041RDB Device Tree Source
   3  *
   4  * Copyright 2011 - 2014 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 /include/ "p2041si-pre.dtsi"
  36
  37 / {
  38         model = "fsl,P2041RDB";
  39         compatible = "fsl,P2041RDB";
  40         #address-cells = <2>;
  41         #size-cells = <2>;
  42         interrupt-parent = <&mpic>;
  43
  44         memory {
  45                 device_type = "memory";
  46         };
  47
  48         reserved-memory {
  49                 #address-cells = <2>;
  50                 #size-cells = <2>;
  51                 ranges;
  52
  53                 bman_fbpr: bman-fbpr {
  54                         size = <0 0x1000000>;
  55                         alignment = <0 0x1000000>;
  56                 };
  57                 qman_fqd: qman-fqd {
  58                         size = <0 0x400000>;
  59                         alignment = <0 0x400000>;
  60                 };
  61                 qman_pfdr: qman-pfdr {
  62                         size = <0 0x2000000>;
  63                         alignment = <0 0x2000000>;
  64                 };
  65         };
  66
  67         dcsr: dcsr@f00000000 {
  68                 ranges = <0x00000000 0xf 0x00000000 0x01008000>;
  69         };
  70
  71         bportals: bman-portals@ff4000000 {
  72                 ranges = <0x0 0xf 0xf4000000 0x200000>;
  73         };
  74
  75         qportals: qman-portals@ff4200000 {
  76                 ranges = <0x0 0xf 0xf4200000 0x200000>;
  77         };
  78
  79         soc: soc@ffe000000 {
  80                 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
  81                 reg = <0xf 0xfe000000 0 0x00001000>;
  82                 spi@110000 {
  83                         flash@0 {
  84                                 #address-cells = <1>;
  85                                 #size-cells = <1>;
  86                                 compatible = "spansion,s25sl12801";
  87                                 reg = <0>;
  88                                 spi-max-frequency = <40000000>; /* input clock */
  89                                 partition@u-boot {
  90                                         label = "u-boot";
  91                                         reg = <0x00000000 0x00100000>;
  92                                         read-only;
  93                                 };
  94                                 partition@kernel {
  95                                         label = "kernel";
  96                                         reg = <0x00100000 0x00500000>;
  97                                         read-only;
  98                                 };
  99                                 partition@dtb {
 100                                         label = "dtb";
 101                                         reg = <0x00600000 0x00100000>;
 102                                         read-only;
 103                                 };
 104                                 partition@fs {
 105                                         label = "file system";
 106                                         reg = <0x00700000 0x00900000>;
 107                                 };
 108                         };
 109                 };
 110
 111                 i2c@118000 {
 112                         lm75b@48 {
 113                                 compatible = "nxp,lm75a";
 114                                 reg = <0x48>;
 115                         };
 116                         eeprom@50 {
 117                                 compatible = "at24,24c256";
 118                                 reg = <0x50>;
 119                         };
 120                         rtc@68 {
 121                                 compatible = "pericom,pt7c4338";
 122                                 reg = <0x68>;
 123                         };
 124                         adt7461@4c {
 125                                 compatible = "adi,adt7461";
 126                                 reg = <0x4c>;
 127                         };
 128                 };
 129
 130                 i2c@118100 {
 131                         eeprom@50 {
 132                                 compatible = "at24,24c256";
 133                                 reg = <0x50>;
 134                         };
 135                 };
 136
 137                 usb1: usb@211000 {
 138                         dr_mode = "host";
 139                 };
 140         };
 141
 142         rio: rapidio@ffe0c0000 {
 143                 reg = <0xf 0xfe0c0000 0 0x11000>;
 144
 145                 port1 {
 146                         ranges = <0 0 0xc 0x20000000 0 0x10000000>;
 147                 };
 148                 port2 {
 149                         ranges = <0 0 0xc 0x30000000 0 0x10000000>;
 150                 };
 151         };
 152
 153         lbc: localbus@ffe124000 {
 154                 reg = <0xf 0xfe124000 0 0x1000>;
 155                 ranges = <0 0 0xf 0xe8000000 0x08000000
 156                           1 0 0xf 0xffa00000 0x00040000>;
 157
 158                 flash@0,0 {
 159                         compatible = "cfi-flash";
 160                         reg = <0 0 0x08000000>;
 161                         bank-width = <2>;
 162                         device-width = <2>;
 163                 };
 164
 165                 nand@1,0 {
 166                         #address-cells = <1>;
 167                         #size-cells = <1>;
 168                         compatible = "fsl,elbc-fcm-nand";
 169                         reg = <0x1 0x0 0x40000>;
 170
 171                         partition@0 {
 172                                 label = "NAND U-Boot Image";
 173                                 reg = <0x0 0x02000000>;
 174                                 read-only;
 175                         };
 176
 177                         partition@2000000 {
 178                                 label = "NAND Root File System";
 179                                 reg = <0x02000000 0x10000000>;
 180                         };
 181
 182                         partition@12000000 {
 183                                 label = "NAND Compressed RFS Image";
 184                                 reg = <0x12000000 0x08000000>;
 185                         };
 186
 187                         partition@1a000000 {
 188                                 label = "NAND Linux Kernel Image";
 189                                 reg = <0x1a000000 0x04000000>;
 190                         };
 191
 192                         partition@1e000000 {
 193                                 label = "NAND DTB Image";
 194                                 reg = <0x1e000000 0x01000000>;
 195                         };
 196
 197                         partition@1f000000 {
 198                                 label = "NAND Writable User area";
 199                                 reg = <0x1f000000 0x01000000>;
 200                         };
 201                 };
 202         };
 203
 204         pci0: pcie@ffe200000 {
 205                 reg = <0xf 0xfe200000 0 0x1000>;
 206                 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 207                           0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
 208                 pcie@0 {
 209                         ranges = <0x02000000 0 0xe0000000
 210                                   0x02000000 0 0xe0000000
 211                                   0 0x20000000
 212
 213                                   0x01000000 0 0x00000000
 214                                   0x01000000 0 0x00000000
 215                                   0 0x00010000>;
 216                 };
 217         };
 218
 219         pci1: pcie@ffe201000 {
 220                 reg = <0xf 0xfe201000 0 0x1000>;
 221                 ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 222                           0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
 223                 pcie@0 {
 224                         ranges = <0x02000000 0 0xe0000000
 225                                   0x02000000 0 0xe0000000
 226                                   0 0x20000000
 227
 228                                   0x01000000 0 0x00000000
 229                                   0x01000000 0 0x00000000
 230                                   0 0x00010000>;
 231                 };
 232         };
 233
 234         pci2: pcie@ffe202000 {
 235                 reg = <0xf 0xfe202000 0 0x1000>;
 236                 ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 237                           0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
 238                 pcie@0 {
 239                         ranges = <0x02000000 0 0xe0000000
 240                                   0x02000000 0 0xe0000000
 241                                   0 0x20000000
 242
 243                                   0x01000000 0 0x00000000
 244                                   0x01000000 0 0x00000000
 245                                   0 0x00010000>;
 246                 };
 247         };
 248 };
 249
 250 /include/ "p2041si-post.dtsi"