2 * T1040 Silicon/SoC Device Tree Source (post include)
4 * Copyright 2013 - 2014 Freescale Semiconductor Inc.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 * * Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * * Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * * Neither the name of Freescale Semiconductor nor the
14 * names of its contributors may be used to endorse or promote products
15 * derived from this software without specific prior written permission.
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
36 compatible = "fsl,bman-fbpr";
37 alloc-ranges = <0 0 0x10000 0>;
41 compatible = "fsl,qman-fqd";
42 alloc-ranges = <0 0 0x10000 0>;
46 compatible = "fsl,qman-pfdr";
47 alloc-ranges = <0 0 0x10000 0>;
53 compatible = "fsl,ifc", "simple-bus";
54 interrupts = <25 2 0 0>;
58 compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
62 bus-range = <0x0 0xff>;
63 interrupts = <20 2 0 0>;
64 fsl,iommu-parent = <&pamu0>;
67 #interrupt-cells = <1>;
71 interrupts = <20 2 0 0>;
72 interrupt-map-mask = <0xf800 0 0 7>;
75 0000 0 0 1 &mpic 40 1 0 0
76 0000 0 0 2 &mpic 1 1 0 0
77 0000 0 0 3 &mpic 2 1 0 0
78 0000 0 0 4 &mpic 3 1 0 0
84 compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
89 interrupts = <21 2 0 0>;
90 fsl,iommu-parent = <&pamu0>;
93 #interrupt-cells = <1>;
97 interrupts = <21 2 0 0>;
98 interrupt-map-mask = <0xf800 0 0 7>;
101 0000 0 0 1 &mpic 41 1 0 0
102 0000 0 0 2 &mpic 5 1 0 0
103 0000 0 0 3 &mpic 6 1 0 0
104 0000 0 0 4 &mpic 7 1 0 0
110 compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
113 #address-cells = <3>;
114 bus-range = <0x0 0xff>;
115 interrupts = <22 2 0 0>;
116 fsl,iommu-parent = <&pamu0>;
119 #interrupt-cells = <1>;
121 #address-cells = <3>;
123 interrupts = <22 2 0 0>;
124 interrupt-map-mask = <0xf800 0 0 7>;
127 0000 0 0 1 &mpic 42 1 0 0
128 0000 0 0 2 &mpic 9 1 0 0
129 0000 0 0 3 &mpic 10 1 0 0
130 0000 0 0 4 &mpic 11 1 0 0
136 compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
139 #address-cells = <3>;
140 bus-range = <0x0 0xff>;
141 interrupts = <23 2 0 0>;
142 fsl,iommu-parent = <&pamu0>;
145 #interrupt-cells = <1>;
147 #address-cells = <3>;
149 interrupts = <23 2 0 0>;
150 interrupt-map-mask = <0xf800 0 0 7>;
153 0000 0 0 1 &mpic 43 1 0 0
154 0000 0 0 2 &mpic 0 1 0 0
155 0000 0 0 3 &mpic 4 1 0 0
156 0000 0 0 4 &mpic 8 1 0 0
162 #address-cells = <1>;
164 compatible = "fsl,dcsr", "simple-bus";
167 compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu";
168 interrupts = <52 2 0 0
174 compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc";
175 reg = <0x1000 0x1000 0x1002000 0x10000>;
178 compatible = "fsl,dcsr-nxc";
179 reg = <0x2000 0x1000>;
182 compatible = "fsl,dcsr-corenet";
183 reg = <0x8000 0x1000 0x1A000 0x1000>;
186 compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa";
187 reg = <0x9000 0x1000>;
190 compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn";
191 reg = <0x11000 0x1000>;
194 compatible = "fsl,dcsr-ddr";
195 dev-handle = <&ddr1>;
196 reg = <0x12000 0x1000>;
199 compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal";
200 reg = <0x18000 0x1000>;
203 compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm";
204 reg = <0x22000 0x1000>;
207 compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
208 reg = <0x30000 0x1000 0x1022000 0x10000>;
211 compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
212 reg = <0x31000 0x1000 0x1042000 0x10000>;
214 dcsr-cpu-sb-proxy@100000 {
215 compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
216 cpu-handle = <&cpu0>;
217 reg = <0x100000 0x1000 0x101000 0x1000>;
219 dcsr-cpu-sb-proxy@108000 {
220 compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
221 cpu-handle = <&cpu1>;
222 reg = <0x108000 0x1000 0x109000 0x1000>;
224 dcsr-cpu-sb-proxy@110000 {
225 compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
226 cpu-handle = <&cpu2>;
227 reg = <0x110000 0x1000 0x111000 0x1000>;
229 dcsr-cpu-sb-proxy@118000 {
230 compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
231 cpu-handle = <&cpu3>;
232 reg = <0x118000 0x1000 0x119000 0x1000>;
237 #address-cells = <0x1>;
239 compatible = "simple-bus";
242 compatible = "fsl,bman-portal";
243 reg = <0x0 0x4000>, <0x1000000 0x1000>;
244 interrupts = <105 2 0 0>;
247 compatible = "fsl,bman-portal";
248 reg = <0x4000 0x4000>, <0x1001000 0x1000>;
249 interrupts = <107 2 0 0>;
252 compatible = "fsl,bman-portal";
253 reg = <0x8000 0x4000>, <0x1002000 0x1000>;
254 interrupts = <109 2 0 0>;
257 compatible = "fsl,bman-portal";
258 reg = <0xc000 0x4000>, <0x1003000 0x1000>;
259 interrupts = <111 2 0 0>;
262 compatible = "fsl,bman-portal";
263 reg = <0x10000 0x4000>, <0x1004000 0x1000>;
264 interrupts = <113 2 0 0>;
267 compatible = "fsl,bman-portal";
268 reg = <0x14000 0x4000>, <0x1005000 0x1000>;
269 interrupts = <115 2 0 0>;
272 compatible = "fsl,bman-portal";
273 reg = <0x18000 0x4000>, <0x1006000 0x1000>;
274 interrupts = <117 2 0 0>;
277 compatible = "fsl,bman-portal";
278 reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
279 interrupts = <119 2 0 0>;
282 compatible = "fsl,bman-portal";
283 reg = <0x20000 0x4000>, <0x1008000 0x1000>;
284 interrupts = <121 2 0 0>;
287 compatible = "fsl,bman-portal";
288 reg = <0x24000 0x4000>, <0x1009000 0x1000>;
289 interrupts = <123 2 0 0>;
294 #address-cells = <0x1>;
296 compatible = "simple-bus";
298 qportal0: qman-portal@0 {
299 compatible = "fsl,qman-portal";
300 reg = <0x0 0x4000>, <0x1000000 0x1000>;
301 interrupts = <104 0x2 0 0>;
304 qportal1: qman-portal@4000 {
305 compatible = "fsl,qman-portal";
306 reg = <0x4000 0x4000>, <0x1001000 0x1000>;
307 interrupts = <106 0x2 0 0>;
310 qportal2: qman-portal@8000 {
311 compatible = "fsl,qman-portal";
312 reg = <0x8000 0x4000>, <0x1002000 0x1000>;
313 interrupts = <108 0x2 0 0>;
316 qportal3: qman-portal@c000 {
317 compatible = "fsl,qman-portal";
318 reg = <0xc000 0x4000>, <0x1003000 0x1000>;
319 interrupts = <110 0x2 0 0>;
322 qportal4: qman-portal@10000 {
323 compatible = "fsl,qman-portal";
324 reg = <0x10000 0x4000>, <0x1004000 0x1000>;
325 interrupts = <112 0x2 0 0>;
328 qportal5: qman-portal@14000 {
329 compatible = "fsl,qman-portal";
330 reg = <0x14000 0x4000>, <0x1005000 0x1000>;
331 interrupts = <114 0x2 0 0>;
334 qportal6: qman-portal@18000 {
335 compatible = "fsl,qman-portal";
336 reg = <0x18000 0x4000>, <0x1006000 0x1000>;
337 interrupts = <116 0x2 0 0>;
340 qportal7: qman-portal@1c000 {
341 compatible = "fsl,qman-portal";
342 reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
343 interrupts = <118 0x2 0 0>;
346 qportal8: qman-portal@20000 {
347 compatible = "fsl,qman-portal";
348 reg = <0x20000 0x4000>, <0x1008000 0x1000>;
349 interrupts = <120 0x2 0 0>;
352 qportal9: qman-portal@24000 {
353 compatible = "fsl,qman-portal";
354 reg = <0x24000 0x4000>, <0x1009000 0x1000>;
355 interrupts = <122 0x2 0 0>;
361 #address-cells = <1>;
364 compatible = "simple-bus";
367 compatible = "fsl,soc-sram-error";
368 interrupts = <16 2 1 29>;
372 compatible = "fsl,corenet-law";
377 ddr1: memory-controller@8000 {
378 compatible = "fsl,qoriq-memory-controller-v5.0",
379 "fsl,qoriq-memory-controller";
380 reg = <0x8000 0x1000>;
381 interrupts = <16 2 1 23>;
384 cpc: l3-cache-controller@10000 {
385 compatible = "fsl,t1040-l3-cache-controller", "cache";
386 reg = <0x10000 0x1000>;
387 interrupts = <16 2 1 27>;
391 compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
392 reg = <0x18000 0x1000>;
393 interrupts = <16 2 1 31>;
394 fsl,ccf-num-csdids = <32>;
395 fsl,ccf-num-snoopids = <32>;
399 compatible = "fsl,pamu-v1.0", "fsl,pamu";
400 reg = <0x20000 0x1000>;
401 ranges = <0 0x20000 0x1000>;
402 #address-cells = <1>;
409 fsl,primary-cache-geometry = <128 1>;
410 fsl,secondary-cache-geometry = <16 2>;
414 /include/ "qoriq-mpic.dtsi"
416 guts: global-utilities@e0000 {
417 compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0";
418 reg = <0xe0000 0xe00>;
420 fsl,liodn-bits = <12>;
423 /include/ "qoriq-clockgen2.dtsi"
424 global-utilities@e1000 {
425 compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
430 compatible = "fsl,qoriq-core-mux-2.0";
431 clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
432 <&pll1 0>, <&pll1 1>, <&pll1 2>;
433 clock-names = "pll0", "pll0-div2", "pll1-div4",
434 "pll1", "pll1-div2", "pll1-div4";
435 clock-output-names = "cmux0";
441 compatible = "fsl,qoriq-core-mux-2.0";
442 clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
443 <&pll1 0>, <&pll1 1>, <&pll1 2>;
444 clock-names = "pll0", "pll0-div2", "pll1-div4",
445 "pll1", "pll1-div2", "pll1-div4";
446 clock-output-names = "cmux1";
452 compatible = "fsl,qoriq-core-mux-2.0";
453 clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
454 <&pll1 0>, <&pll1 1>, <&pll1 2>;
455 clock-names = "pll0", "pll0-div2", "pll1-div4",
456 "pll1", "pll1-div2", "pll1-div4";
457 clock-output-names = "cmux2";
463 compatible = "fsl,qoriq-core-mux-2.0";
464 clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
465 <&pll1 0>, <&pll1 1>, <&pll1 2>;
466 clock-names = "pll0_0", "pll0_1", "pll0_2",
467 "pll1_0", "pll1_1", "pll1_2";
468 clock-output-names = "cmux3";
472 rcpm: global-utilities@e2000 {
473 compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.0";
474 reg = <0xe2000 0x1000>;
478 compatible = "fsl,t1040-sfp";
479 reg = <0xe8000 0x1000>;
482 serdes: serdes@ea000 {
483 compatible = "fsl,t1040-serdes";
484 reg = <0xea000 0x4000>;
487 scfg: global-utilities@fc000 {
488 compatible = "fsl,t1040-scfg";
489 reg = <0xfc000 0x1000>;
492 /include/ "elo3-dma-0.dtsi"
493 /include/ "elo3-dma-1.dtsi"
494 /include/ "qoriq-espi-0.dtsi"
496 fsl,espi-num-chipselects = <4>;
499 /include/ "qoriq-esdhc-0.dtsi"
501 compatible = "fsl,t1040-esdhc", "fsl,esdhc";
502 fsl,iommu-parent = <&pamu0>;
503 fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
506 /include/ "qoriq-i2c-0.dtsi"
507 /include/ "qoriq-i2c-1.dtsi"
508 /include/ "qoriq-duart-0.dtsi"
509 /include/ "qoriq-duart-1.dtsi"
510 /include/ "qoriq-gpio-0.dtsi"
511 /include/ "qoriq-gpio-1.dtsi"
512 /include/ "qoriq-gpio-2.dtsi"
513 /include/ "qoriq-gpio-3.dtsi"
514 /include/ "qoriq-usb2-mph-0.dtsi"
516 compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
517 fsl,iommu-parent = <&pamu0>;
518 fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
522 /include/ "qoriq-usb2-dr-0.dtsi"
524 compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
525 fsl,iommu-parent = <&pamu0>;
526 fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
532 compatible = "fsl,t1040-diu", "fsl,diu";
533 reg = <0x180000 1000>;
534 interrupts = <74 2 0 0>;
537 /include/ "qoriq-sata2-0.dtsi"
539 fsl,iommu-parent = <&pamu0>;
540 fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
542 /include/ "qoriq-sata2-1.dtsi"
544 fsl,iommu-parent = <&pamu0>;
545 fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
547 /include/ "qoriq-sec5.0-0.dtsi"
548 /include/ "qoriq-qman3.dtsi"
549 /include/ "qoriq-bman1.dtsi"
551 /include/ "qoriq-fman3l-0.dtsi"
552 /include/ "qoriq-fman3-0-1g-0.dtsi"
553 /include/ "qoriq-fman3-0-1g-1.dtsi"
554 /include/ "qoriq-fman3-0-1g-2.dtsi"
555 /include/ "qoriq-fman3-0-1g-3.dtsi"
556 /include/ "qoriq-fman3-0-1g-4.dtsi"
558 enet0: ethernet@e0000 {
561 enet1: ethernet@e2000 {
564 enet2: ethernet@e4000 {
567 enet3: ethernet@e6000 {
570 enet4: ethernet@e8000 {
574 interrupts = <100 1 0 0>;