arch/powerpc/platforms/85xx/ge_imp3a.c

   1 /*
   2  * GE IMP3A Board Setup
   3  *
   4  * Author Martyn Welch <martyn.welch@ge.com>
   5  *
   6  * Copyright 2010 GE Intelligent Platforms Embedded Systems, Inc.
   7  *
   8  * This program is free software; you can redistribute  it and/or modify it
   9  * under  the terms of  the GNU General  Public License as published by the
  10  * Free Software Foundation;  either version 2 of the  License, or (at your
  11  * option) any later version.
  12  *
  13  * Based on: mpc85xx_ds.c (MPC85xx DS Board Setup)
  14  * Copyright 2007 Freescale Semiconductor Inc.
  15  */
  16
  17 #include <linux/stddef.h>
  18 #include <linux/kernel.h>
  19 #include <linux/pci.h>
  20 #include <linux/kdev_t.h>
  21 #include <linux/delay.h>
  22 #include <linux/seq_file.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/of_platform.h>
  25
  26 #include <asm/time.h>
  27 #include <asm/machdep.h>
  28 #include <asm/pci-bridge.h>
  29 #include <mm/mmu_decl.h>
  30 #include <asm/prom.h>
  31 #include <asm/udbg.h>
  32 #include <asm/mpic.h>
  33 #include <asm/swiotlb.h>
  34 #include <asm/nvram.h>
  35
  36 #include <sysdev/fsl_soc.h>
  37 #include <sysdev/fsl_pci.h>
  38 #include "smp.h"
  39
  40 #include "mpc85xx.h"
  41 #include <sysdev/ge/ge_pic.h>
  42
  43 void __iomem *imp3a_regs;
  44
  45 void __init ge_imp3a_pic_init(void)
  46 {
  47         struct mpic *mpic;
  48         struct device_node *np;
  49         struct device_node *cascade_node = NULL;
  50         unsigned long root = of_get_flat_dt_root();
  51
  52         if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) {
  53                 mpic = mpic_alloc(NULL, 0,
  54                         MPIC_NO_RESET |
  55                         MPIC_BIG_ENDIAN |
  56                         MPIC_SINGLE_DEST_CPU,
  57                         0, 256, " OpenPIC  ");
  58         } else {
  59                 mpic = mpic_alloc(NULL, 0,
  60                           MPIC_BIG_ENDIAN |
  61                           MPIC_SINGLE_DEST_CPU,
  62                         0, 256, " OpenPIC  ");
  63         }
  64
  65         BUG_ON(mpic == NULL);
  66         mpic_init(mpic);
  67         /*
  68          * There is a simple interrupt handler in the main FPGA, this needs
  69          * to be cascaded into the MPIC
  70          */
  71         for_each_node_by_type(np, "interrupt-controller")
  72                 if (of_device_is_compatible(np, "gef,fpga-pic-1.00")) {
  73                         cascade_node = np;
  74                         break;
  75                 }
  76
  77         if (cascade_node == NULL) {
  78                 printk(KERN_WARNING "IMP3A: No FPGA PIC\n");
  79                 return;
  80         }
  81
  82         gef_pic_init(cascade_node);
  83         of_node_put(cascade_node);
  84 }
  85
  86 static void ge_imp3a_pci_assign_primary(void)
  87 {
  88 #ifdef CONFIG_PCI
  89         struct device_node *np;
  90         struct resource rsrc;
  91
  92         for_each_node_by_type(np, "pci") {
  93                 if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
  94                     of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
  95                     of_device_is_compatible(np, "fsl,p2020-pcie")) {
  96                         of_address_to_resource(np, 0, &rsrc);
  97                         if ((rsrc.start & 0xfffff) == 0x9000)
  98                                 fsl_pci_primary = np;
  99                 }
 100         }
 101 #endif
 102 }
 103
 104 /*
 105  * Setup the architecture
 106  */
 107 static void __init ge_imp3a_setup_arch(void)
 108 {
 109         struct device_node *regs;
 110
 111         if (ppc_md.progress)
 112                 ppc_md.progress("ge_imp3a_setup_arch()", 0);
 113
 114         mpc85xx_smp_init();
 115
 116         ge_imp3a_pci_assign_primary();
 117
 118         swiotlb_detect_4g();
 119
 120         /* Remap basic board registers */
 121         regs = of_find_compatible_node(NULL, NULL, "ge,imp3a-fpga-regs");
 122         if (regs) {
 123                 imp3a_regs = of_iomap(regs, 0);
 124                 if (imp3a_regs == NULL)
 125                         printk(KERN_WARNING "Unable to map board registers\n");
 126                 of_node_put(regs);
 127         }
 128
 129 #if defined(CONFIG_MMIO_NVRAM)
 130         mmio_nvram_init();
 131 #endif
 132
 133         printk(KERN_INFO "GE Intelligent Platforms IMP3A 3U cPCI SBC\n");
 134 }
 135
 136 /* Return the PCB revision */
 137 static unsigned int ge_imp3a_get_pcb_rev(void)
 138 {
 139         unsigned int reg;
 140
 141         reg = ioread16(imp3a_regs);
 142         return (reg >> 8) & 0xff;
 143 }
 144
 145 /* Return the board (software) revision */
 146 static unsigned int ge_imp3a_get_board_rev(void)
 147 {
 148         unsigned int reg;
 149
 150         reg = ioread16(imp3a_regs + 0x2);
 151         return reg & 0xff;
 152 }
 153
 154 /* Return the FPGA revision */
 155 static unsigned int ge_imp3a_get_fpga_rev(void)
 156 {
 157         unsigned int reg;
 158
 159         reg = ioread16(imp3a_regs + 0x2);
 160         return (reg >> 8) & 0xff;
 161 }
 162
 163 /* Return compactPCI Geographical Address */
 164 static unsigned int ge_imp3a_get_cpci_geo_addr(void)
 165 {
 166         unsigned int reg;
 167
 168         reg = ioread16(imp3a_regs + 0x6);
 169         return (reg & 0x0f00) >> 8;
 170 }
 171
 172 /* Return compactPCI System Controller Status */
 173 static unsigned int ge_imp3a_get_cpci_is_syscon(void)
 174 {
 175         unsigned int reg;
 176
 177         reg = ioread16(imp3a_regs + 0x6);
 178         return reg & (1 << 12);
 179 }
 180
 181 static void ge_imp3a_show_cpuinfo(struct seq_file *m)
 182 {
 183         seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
 184
 185         seq_printf(m, "Revision\t: %u%c\n", ge_imp3a_get_pcb_rev(),
 186                 ('A' + ge_imp3a_get_board_rev() - 1));
 187
 188         seq_printf(m, "FPGA Revision\t: %u\n", ge_imp3a_get_fpga_rev());
 189
 190         seq_printf(m, "cPCI geo. addr\t: %u\n", ge_imp3a_get_cpci_geo_addr());
 191
 192         seq_printf(m, "cPCI syscon\t: %s\n",
 193                 ge_imp3a_get_cpci_is_syscon() ? "yes" : "no");
 194 }
 195
 196 /*
 197  * Called very early, device-tree isn't unflattened
 198  */
 199 static int __init ge_imp3a_probe(void)
 200 {
 201         unsigned long root = of_get_flat_dt_root();
 202
 203         return of_flat_dt_is_compatible(root, "ge,IMP3A");
 204 }
 205
 206 machine_arch_initcall(ge_imp3a, mpc85xx_common_publish_devices);
 207
 208 machine_arch_initcall(ge_imp3a, swiotlb_setup_bus_notifier);
 209
 210 define_machine(ge_imp3a) {
 211         .name                   = "GE_IMP3A",
 212         .probe                  = ge_imp3a_probe,
 213         .setup_arch             = ge_imp3a_setup_arch,
 214         .init_IRQ               = ge_imp3a_pic_init,
 215         .show_cpuinfo           = ge_imp3a_show_cpuinfo,
 216 #ifdef CONFIG_PCI
 217         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
 218         .pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 219 #endif
 220         .get_irq                = mpic_get_irq,
 221         .restart                = fsl_rstcr_restart,
 222         .calibrate_decr         = generic_calibrate_decr,
 223         .progress               = udbg_progress,
 224 };