2 * Copyright (C) 2006-2010, 2012-2013 Freescale Semiconductor, Inc.
5 * Author: Andy Fleming <afleming@freescale.com>
7 * Based on 83xx/mpc8360e_pb.c by:
8 * Li Yang <LeoLi@freescale.com>
9 * Yin Olivia <Hong-hua.Yin@freescale.com>
12 * MPC85xx MDS board specific routines.
14 * This program is free software; you can redistribute it and/or modify it
15 * under the terms of the GNU General Public License as published by the
16 * Free Software Foundation; either version 2 of the License, or (at your
17 * option) any later version.
20 #include <linux/stddef.h>
21 #include <linux/kernel.h>
22 #include <linux/init.h>
23 #include <linux/errno.h>
24 #include <linux/reboot.h>
25 #include <linux/pci.h>
26 #include <linux/kdev_t.h>
27 #include <linux/major.h>
28 #include <linux/console.h>
29 #include <linux/delay.h>
30 #include <linux/seq_file.h>
31 #include <linux/initrd.h>
32 #include <linux/fsl_devices.h>
33 #include <linux/of_platform.h>
34 #include <linux/of_device.h>
35 #include <linux/phy.h>
36 #include <linux/memblock.h>
37 #include <linux/fsl/guts.h>
39 #include <linux/atomic.h>
42 #include <asm/machdep.h>
43 #include <asm/pci-bridge.h>
45 #include <mm/mmu_decl.h>
48 #include <sysdev/fsl_soc.h>
49 #include <sysdev/fsl_pci.h>
50 #include <sysdev/simple_gpio.h>
52 #include <asm/qe_ic.h>
54 #include <asm/swiotlb.h>
61 #define DBG(fmt...) udbg_printf(fmt)
66 #define MV88E1111_SCR 0x10
67 #define MV88E1111_SCR_125CLK 0x0010
68 static int mpc8568_fixup_125_clock(struct phy_device
*phydev
)
73 /* Workaround for the 125 CLK Toggle */
74 scr
= phy_read(phydev
, MV88E1111_SCR
);
79 err
= phy_write(phydev
, MV88E1111_SCR
, scr
& ~(MV88E1111_SCR_125CLK
));
84 err
= phy_write(phydev
, MII_BMCR
, BMCR_RESET
);
89 scr
= phy_read(phydev
, MV88E1111_SCR
);
94 err
= phy_write(phydev
, MV88E1111_SCR
, scr
| 0x0008);
99 static int mpc8568_mds_phy_fixups(struct phy_device
*phydev
)
105 err
= phy_write(phydev
,29, 0x0006);
110 temp
= phy_read(phydev
, 30);
115 temp
= (temp
& (~0x8000)) | 0x4000;
116 err
= phy_write(phydev
,30, temp
);
121 err
= phy_write(phydev
,29, 0x000a);
126 temp
= phy_read(phydev
, 30);
131 temp
= phy_read(phydev
, 30);
138 err
= phy_write(phydev
,30,temp
);
143 /* Disable automatic MDI/MDIX selection */
144 temp
= phy_read(phydev
, 16);
150 err
= phy_write(phydev
,16,temp
);
155 /* ************************************************************************
157 * Setup the architecture
160 #ifdef CONFIG_QUICC_ENGINE
161 static void __init
mpc85xx_mds_reset_ucc_phys(void)
163 struct device_node
*np
;
164 static u8 __iomem
*bcsr_regs
;
167 np
= of_find_node_by_name(NULL
, "bcsr");
171 bcsr_regs
= of_iomap(np
, 0);
176 if (machine_is(mpc8568_mds
)) {
177 #define BCSR_UCC1_GETH_EN (0x1 << 7)
178 #define BCSR_UCC2_GETH_EN (0x1 << 7)
179 #define BCSR_UCC1_MODE_MSK (0x3 << 4)
180 #define BCSR_UCC2_MODE_MSK (0x3 << 0)
182 /* Turn off UCC1 & UCC2 */
183 clrbits8(&bcsr_regs
[8], BCSR_UCC1_GETH_EN
);
184 clrbits8(&bcsr_regs
[9], BCSR_UCC2_GETH_EN
);
186 /* Mode is RGMII, all bits clear */
187 clrbits8(&bcsr_regs
[11], BCSR_UCC1_MODE_MSK
|
190 /* Turn UCC1 & UCC2 on */
191 setbits8(&bcsr_regs
[8], BCSR_UCC1_GETH_EN
);
192 setbits8(&bcsr_regs
[9], BCSR_UCC2_GETH_EN
);
193 } else if (machine_is(mpc8569_mds
)) {
194 #define BCSR7_UCC12_GETHnRST (0x1 << 2)
195 #define BCSR8_UEM_MARVELL_RST (0x1 << 1)
196 #define BCSR_UCC_RGMII (0x1 << 6)
197 #define BCSR_UCC_RTBI (0x1 << 5)
199 * U-Boot mangles interrupt polarity for Marvell PHYs,
200 * so reset built-in and UEM Marvell PHYs, this puts
201 * the PHYs into their normal state.
203 clrbits8(&bcsr_regs
[7], BCSR7_UCC12_GETHnRST
);
204 setbits8(&bcsr_regs
[8], BCSR8_UEM_MARVELL_RST
);
206 setbits8(&bcsr_regs
[7], BCSR7_UCC12_GETHnRST
);
207 clrbits8(&bcsr_regs
[8], BCSR8_UEM_MARVELL_RST
);
209 for_each_compatible_node(np
, "network", "ucc_geth") {
210 const unsigned int *prop
;
213 prop
= of_get_property(np
, "cell-index", NULL
);
219 prop
= of_get_property(np
, "phy-connection-type", NULL
);
223 if (strcmp("rtbi", (const char *)prop
) == 0)
224 clrsetbits_8(&bcsr_regs
[7 + ucc_num
],
225 BCSR_UCC_RGMII
, BCSR_UCC_RTBI
);
227 } else if (machine_is(p1021_mds
)) {
228 #define BCSR11_ENET_MICRST (0x1 << 5)
229 /* Reset Micrel PHY */
230 clrbits8(&bcsr_regs
[11], BCSR11_ENET_MICRST
);
231 setbits8(&bcsr_regs
[11], BCSR11_ENET_MICRST
);
237 static void __init
mpc85xx_mds_qe_init(void)
239 struct device_node
*np
;
242 mpc85xx_qe_par_io_init();
243 mpc85xx_mds_reset_ucc_phys();
245 if (machine_is(p1021_mds
)) {
247 struct ccsr_guts __iomem
*guts
;
249 np
= of_find_node_by_name(NULL
, "global-utilities");
251 guts
= of_iomap(np
, 0);
253 pr_err("mpc85xx-rdb: could not map global utilities register\n");
255 /* P1021 has pins muxed for QE and other functions. To
256 * enable QE UEC mode, we need to set bit QE0 for UCC1
257 * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
258 * and QE12 for QE MII management signals in PMUXCR
261 setbits32(&guts
->pmuxcr
, MPC85xx_PMUXCR_QE(0) |
262 MPC85xx_PMUXCR_QE(3) |
263 MPC85xx_PMUXCR_QE(9) |
264 MPC85xx_PMUXCR_QE(12));
273 static void __init
mpc85xx_mds_qeic_init(void)
275 struct device_node
*np
;
277 np
= of_find_compatible_node(NULL
, NULL
, "fsl,qe");
278 if (!of_device_is_available(np
)) {
283 np
= of_find_compatible_node(NULL
, NULL
, "fsl,qe-ic");
285 np
= of_find_node_by_type(NULL
, "qeic");
290 if (machine_is(p1021_mds
))
291 qe_ic_init(np
, 0, qe_ic_cascade_low_mpic
,
292 qe_ic_cascade_high_mpic
);
294 qe_ic_init(np
, 0, qe_ic_cascade_muxed_mpic
, NULL
);
298 static void __init
mpc85xx_mds_qe_init(void) { }
299 static void __init
mpc85xx_mds_qeic_init(void) { }
300 #endif /* CONFIG_QUICC_ENGINE */
302 static void __init
mpc85xx_mds_setup_arch(void)
305 ppc_md
.progress("mpc85xx_mds_setup_arch()", 0);
309 mpc85xx_mds_qe_init();
311 fsl_pci_assign_primary();
317 static int __init
board_fixups(void)
320 char *compstrs
[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"};
321 struct device_node
*mdio
;
325 for (i
= 0; i
< ARRAY_SIZE(compstrs
); i
++) {
326 mdio
= of_find_compatible_node(NULL
, NULL
, compstrs
[i
]);
328 of_address_to_resource(mdio
, 0, &res
);
329 snprintf(phy_id
, sizeof(phy_id
), "%llx:%02x",
330 (unsigned long long)res
.start
, 1);
332 phy_register_fixup_for_id(phy_id
, mpc8568_fixup_125_clock
);
333 phy_register_fixup_for_id(phy_id
, mpc8568_mds_phy_fixups
);
335 /* Register a workaround for errata */
336 snprintf(phy_id
, sizeof(phy_id
), "%llx:%02x",
337 (unsigned long long)res
.start
, 7);
338 phy_register_fixup_for_id(phy_id
, mpc8568_mds_phy_fixups
);
345 machine_arch_initcall(mpc8568_mds
, board_fixups
);
346 machine_arch_initcall(mpc8569_mds
, board_fixups
);
348 static int __init
mpc85xx_publish_devices(void)
350 if (machine_is(mpc8568_mds
))
351 simple_gpiochip_init("fsl,mpc8568mds-bcsr-gpio");
352 if (machine_is(mpc8569_mds
))
353 simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
355 return mpc85xx_common_publish_devices();
358 machine_arch_initcall(mpc8568_mds
, mpc85xx_publish_devices
);
359 machine_arch_initcall(mpc8569_mds
, mpc85xx_publish_devices
);
360 machine_arch_initcall(p1021_mds
, mpc85xx_common_publish_devices
);
362 machine_arch_initcall(mpc8568_mds
, swiotlb_setup_bus_notifier
);
363 machine_arch_initcall(mpc8569_mds
, swiotlb_setup_bus_notifier
);
364 machine_arch_initcall(p1021_mds
, swiotlb_setup_bus_notifier
);
366 static void __init
mpc85xx_mds_pic_init(void)
368 struct mpic
*mpic
= mpic_alloc(NULL
, 0, MPIC_BIG_ENDIAN
|
369 MPIC_SINGLE_DEST_CPU
,
370 0, 256, " OpenPIC ");
371 BUG_ON(mpic
== NULL
);
374 mpc85xx_mds_qeic_init();
377 static int __init
mpc85xx_mds_probe(void)
379 unsigned long root
= of_get_flat_dt_root();
381 return of_flat_dt_is_compatible(root
, "MPC85xxMDS");
384 define_machine(mpc8568_mds
) {
385 .name
= "MPC8568 MDS",
386 .probe
= mpc85xx_mds_probe
,
387 .setup_arch
= mpc85xx_mds_setup_arch
,
388 .init_IRQ
= mpc85xx_mds_pic_init
,
389 .get_irq
= mpic_get_irq
,
390 .restart
= fsl_rstcr_restart
,
391 .calibrate_decr
= generic_calibrate_decr
,
392 .progress
= udbg_progress
,
394 .pcibios_fixup_bus
= fsl_pcibios_fixup_bus
,
395 .pcibios_fixup_phb
= fsl_pcibios_fixup_phb
,
399 static int __init
mpc8569_mds_probe(void)
401 unsigned long root
= of_get_flat_dt_root();
403 return of_flat_dt_is_compatible(root
, "fsl,MPC8569EMDS");
406 define_machine(mpc8569_mds
) {
407 .name
= "MPC8569 MDS",
408 .probe
= mpc8569_mds_probe
,
409 .setup_arch
= mpc85xx_mds_setup_arch
,
410 .init_IRQ
= mpc85xx_mds_pic_init
,
411 .get_irq
= mpic_get_irq
,
412 .restart
= fsl_rstcr_restart
,
413 .calibrate_decr
= generic_calibrate_decr
,
414 .progress
= udbg_progress
,
416 .pcibios_fixup_bus
= fsl_pcibios_fixup_bus
,
417 .pcibios_fixup_phb
= fsl_pcibios_fixup_phb
,
421 static int __init
p1021_mds_probe(void)
423 unsigned long root
= of_get_flat_dt_root();
425 return of_flat_dt_is_compatible(root
, "fsl,P1021MDS");
429 define_machine(p1021_mds
) {
431 .probe
= p1021_mds_probe
,
432 .setup_arch
= mpc85xx_mds_setup_arch
,
433 .init_IRQ
= mpc85xx_mds_pic_init
,
434 .get_irq
= mpic_get_irq
,
435 .restart
= fsl_rstcr_restart
,
436 .calibrate_decr
= generic_calibrate_decr
,
437 .progress
= udbg_progress
,
439 .pcibios_fixup_bus
= fsl_pcibios_fixup_bus
,
440 .pcibios_fixup_phb
= fsl_pcibios_fixup_phb
,