arch/powerpc/platforms/85xx/sgy_cts1000.c

   1 /*
   2  * Servergy CTS-1000 Setup
   3  *
   4  * Maintained by Ben Collins <ben.c@servergy.com>
   5  *
   6  * Copyright 2012 by Servergy, Inc.
   7  *
   8  * This program is free software; you can redistribute  it and/or modify it
   9  * under  the terms of  the GNU General  Public License as published by the
  10  * Free Software Foundation;  either version 2 of the  License, or (at your
  11  * option) any later version.
  12  */
  13
  14 #include <linux/platform_device.h>
  15 #include <linux/device.h>
  16 #include <linux/module.h>
  17 #include <linux/of_gpio.h>
  18 #include <linux/of_irq.h>
  19 #include <linux/workqueue.h>
  20 #include <linux/reboot.h>
  21 #include <linux/interrupt.h>
  22
  23 #include <asm/machdep.h>
  24
  25 static struct device_node *halt_node;
  26
  27 static const struct of_device_id child_match[] = {
  28         {
  29                 .compatible = "sgy,gpio-halt",
  30         },
  31         {},
  32 };
  33
  34 static void gpio_halt_wfn(struct work_struct *work)
  35 {
  36         /* Likely wont return */
  37         orderly_poweroff(true);
  38 }
  39 static DECLARE_WORK(gpio_halt_wq, gpio_halt_wfn);
  40
  41 static void gpio_halt_cb(void)
  42 {
  43         enum of_gpio_flags flags;
  44         int trigger, gpio;
  45
  46         if (!halt_node)
  47                 return;
  48
  49         gpio = of_get_gpio_flags(halt_node, 0, &flags);
  50
  51         if (!gpio_is_valid(gpio))
  52                 return;
  53
  54         trigger = (flags == OF_GPIO_ACTIVE_LOW);
  55
  56         printk(KERN_INFO "gpio-halt: triggering GPIO.\n");
  57
  58         /* Probably wont return */
  59         gpio_set_value(gpio, trigger);
  60 }
  61
  62 /* This IRQ means someone pressed the power button and it is waiting for us
  63  * to handle the shutdown/poweroff. */
  64 static irqreturn_t gpio_halt_irq(int irq, void *__data)
  65 {
  66         printk(KERN_INFO "gpio-halt: shutdown due to power button IRQ.\n");
  67         schedule_work(&gpio_halt_wq);
  68
  69         return IRQ_HANDLED;
  70 };
  71
  72 static int gpio_halt_probe(struct platform_device *pdev)
  73 {
  74         enum of_gpio_flags flags;
  75         struct device_node *node = pdev->dev.of_node;
  76         int gpio, err, irq;
  77         int trigger;
  78
  79         if (!node)
  80                 return -ENODEV;
  81
  82         /* If there's no matching child, this isn't really an error */
  83         halt_node = of_find_matching_node(node, child_match);
  84         if (!halt_node)
  85                 return 0;
  86
  87         /* Technically we could just read the first one, but punish
  88          * DT writers for invalid form. */
  89         if (of_gpio_count(halt_node) != 1)
  90                 return -EINVAL;
  91
  92         /* Get the gpio number relative to the dynamic base. */
  93         gpio = of_get_gpio_flags(halt_node, 0, &flags);
  94         if (!gpio_is_valid(gpio))
  95                 return -EINVAL;
  96
  97         err = gpio_request(gpio, "gpio-halt");
  98         if (err) {
  99                 printk(KERN_ERR "gpio-halt: error requesting GPIO %d.\n",
 100                        gpio);
 101                 halt_node = NULL;
 102                 return err;
 103         }
 104
 105         trigger = (flags == OF_GPIO_ACTIVE_LOW);
 106
 107         gpio_direction_output(gpio, !trigger);
 108
 109         /* Now get the IRQ which tells us when the power button is hit */
 110         irq = irq_of_parse_and_map(halt_node, 0);
 111         err = request_irq(irq, gpio_halt_irq, IRQF_TRIGGER_RISING |
 112                           IRQF_TRIGGER_FALLING, "gpio-halt", halt_node);
 113         if (err) {
 114                 printk(KERN_ERR "gpio-halt: error requesting IRQ %d for "
 115                        "GPIO %d.\n", irq, gpio);
 116                 gpio_free(gpio);
 117                 halt_node = NULL;
 118                 return err;
 119         }
 120
 121         /* Register our halt function */
 122         ppc_md.halt = gpio_halt_cb;
 123         pm_power_off = gpio_halt_cb;
 124
 125         printk(KERN_INFO "gpio-halt: registered GPIO %d (%d trigger, %d"
 126                " irq).\n", gpio, trigger, irq);
 127
 128         return 0;
 129 }
 130
 131 static int gpio_halt_remove(struct platform_device *pdev)
 132 {
 133         if (halt_node) {
 134                 int gpio = of_get_gpio(halt_node, 0);
 135                 int irq = irq_of_parse_and_map(halt_node, 0);
 136
 137                 free_irq(irq, halt_node);
 138
 139                 ppc_md.halt = NULL;
 140                 pm_power_off = NULL;
 141
 142                 gpio_free(gpio);
 143
 144                 halt_node = NULL;
 145         }
 146
 147         return 0;
 148 }
 149
 150 static const struct of_device_id gpio_halt_match[] = {
 151         /* We match on the gpio bus itself and scan the children since they
 152          * wont be matched against us. We know the bus wont match until it
 153          * has been registered too. */
 154         {
 155                 .compatible = "fsl,qoriq-gpio",
 156         },
 157         {},
 158 };
 159 MODULE_DEVICE_TABLE(of, gpio_halt_match);
 160
 161 static struct platform_driver gpio_halt_driver = {
 162         .driver = {
 163                 .name           = "gpio-halt",
 164                 .of_match_table = gpio_halt_match,
 165         },
 166         .probe          = gpio_halt_probe,
 167         .remove         = gpio_halt_remove,
 168 };
 169
 170 module_platform_driver(gpio_halt_driver);
 171
 172 MODULE_DESCRIPTION("Driver to support GPIO triggered system halt for Servergy CTS-1000 Systems.");
 173 MODULE_VERSION("1.0");
 174 MODULE_AUTHOR("Ben Collins <ben.c@servergy.com>");
 175 MODULE_LICENSE("GPL");