drivers/char/lp.c

   1 /*
   2  * Generic parallel printer driver
   3  *
   4  * Copyright (C) 1992 by Jim Weigand and Linus Torvalds
   5  * Copyright (C) 1992,1993 by Michael K. Johnson
   6  * - Thanks much to Gunter Windau for pointing out to me where the error
   7  *   checking ought to be.
   8  * Copyright (C) 1993 by Nigel Gamble (added interrupt code)
   9  * Copyright (C) 1994 by Alan Cox (Modularised it)
  10  * LPCAREFUL, LPABORT, LPGETSTATUS added by Chris Metcalf, metcalf@lcs.mit.edu
  11  * Statistics and support for slow printers by Rob Janssen, rob@knoware.nl
  12  * "lp=" command line parameters added by Grant Guenther, grant@torque.net
  13  * lp_read (Status readback) support added by Carsten Gross,
  14  *                                             carsten@sol.wohnheim.uni-ulm.de
  15  * Support for parport by Philip Blundell <philb@gnu.org>
  16  * Parport sharing hacking by Andrea Arcangeli
  17  * Fixed kernel_(to/from)_user memory copy to check for errors
  18  *                              by Riccardo Facchetti <fizban@tin.it>
  19  * 22-JAN-1998  Added support for devfs  Richard Gooch <rgooch@atnf.csiro.au>
  20  * Redesigned interrupt handling for handle printers with buggy handshake
  21  *                              by Andrea Arcangeli, 11 May 1998
  22  * Full efficient handling of printer with buggy irq handshake (now I have
  23  * understood the meaning of the strange handshake). This is done sending new
  24  * characters if the interrupt is just happened, even if the printer say to
  25  * be still BUSY. This is needed at least with Epson Stylus Color. To enable
  26  * the new TRUST_IRQ mode read the `LP OPTIMIZATION' section below...
  27  * Fixed the irq on the rising edge of the strobe case.
  28  * Obsoleted the CAREFUL flag since a printer that doesn' t work with
  29  * CAREFUL will block a bit after in lp_check_status().
  30  *                              Andrea Arcangeli, 15 Oct 1998
  31  * Obsoleted and removed all the lowlevel stuff implemented in the last
  32  * month to use the IEEE1284 functions (that handle the _new_ compatibilty
  33  * mode fine).
  34  */
  35
  36 /* This driver should, in theory, work with any parallel port that has an
  37  * appropriate low-level driver; all I/O is done through the parport
  38  * abstraction layer.
  39  *
  40  * If this driver is built into the kernel, you can configure it using the
  41  * kernel command-line.  For example:
  42  *
  43  *      lp=parport1,none,parport2       (bind lp0 to parport1, disable lp1 and
  44  *                                       bind lp2 to parport2)
  45  *
  46  *      lp=auto                         (assign lp devices to all ports that
  47  *                                       have printers attached, as determined
  48  *                                       by the IEEE-1284 autoprobe)
  49  *
  50  *      lp=reset                        (reset the printer during
  51  *                                       initialisation)
  52  *
  53  *      lp=off                          (disable the printer driver entirely)
  54  *
  55  * If the driver is loaded as a module, similar functionality is available
  56  * using module parameters.  The equivalent of the above commands would be:
  57  *
  58  *      # insmod lp.o parport=1,none,2
  59  *
  60  *      # insmod lp.o parport=auto
  61  *
  62  *      # insmod lp.o reset=1
  63  */
  64
  65 /* COMPATIBILITY WITH OLD KERNELS
  66  *
  67  * Under Linux 2.0 and previous versions, lp devices were bound to ports at
  68  * particular I/O addresses, as follows:
  69  *
  70  *      lp0             0x3bc
  71  *      lp1             0x378
  72  *      lp2             0x278
  73  *
  74  * The new driver, by default, binds lp devices to parport devices as it
  75  * finds them.  This means that if you only have one port, it will be bound
  76  * to lp0 regardless of its I/O address.  If you need the old behaviour, you
  77  * can force it using the parameters described above.
  78  */
  79
  80 /*
  81  * The new interrupt handling code take care of the buggy handshake
  82  * of some HP and Epson printer:
  83  * ___
  84  * ACK    _______________    ___________
  85  *                       |__|
  86  * ____
  87  * BUSY   _________              _______
  88  *                 |____________|
  89  *
  90  * I discovered this using the printer scanner that you can find at:
  91  *
  92  *      ftp://e-mind.com/pub/linux/pscan/
  93  *
  94  *                                      11 May 98, Andrea Arcangeli
  95  *
  96  * My printer scanner run on an Epson Stylus Color show that such printer
  97  * generates the irq on the _rising_ edge of the STROBE. Now lp handle
  98  * this case fine too.
  99  *
 100  *                                      15 Oct 1998, Andrea Arcangeli
 101  *
 102  * The so called `buggy' handshake is really the well documented
 103  * compatibility mode IEEE1284 handshake. They changed the well known
 104  * Centronics handshake acking in the middle of busy expecting to not
 105  * break drivers or legacy application, while they broken linux lp
 106  * until I fixed it reverse engineering the protocol by hand some
 107  * month ago...
 108  *
 109  *                                     14 Dec 1998, Andrea Arcangeli
 110  *
 111  * Copyright (C) 2000 by Tim Waugh (added LPSETTIMEOUT ioctl)
 112  */
 113
 114 #include <linux/module.h>
 115 #include <linux/init.h>
 116
 117 #include <linux/errno.h>
 118 #include <linux/kernel.h>
 119 #include <linux/major.h>
 120 #include <linux/sched.h>
 121 #include <linux/slab.h>
 122 #include <linux/fcntl.h>
 123 #include <linux/delay.h>
 124 #include <linux/poll.h>
 125 #include <linux/console.h>
 126 #include <linux/device.h>
 127 #include <linux/wait.h>
 128 #include <linux/jiffies.h>
 129 #include <linux/mutex.h>
 130 #include <linux/compat.h>
 131
 132 #include <linux/parport.h>
 133 #undef LP_STATS
 134 #include <linux/lp.h>
 135
 136 #include <asm/irq.h>
 137 #include <asm/uaccess.h>
 138
 139 /* if you have more than 8 printers, remember to increase LP_NO */
 140 #define LP_NO 8
 141
 142 static DEFINE_MUTEX(lp_mutex);
 143 static struct lp_struct lp_table[LP_NO];
 144
 145 static unsigned int lp_count = 0;
 146 static struct class *lp_class;
 147
 148 #ifdef CONFIG_LP_CONSOLE
 149 static struct parport *console_registered;
 150 #endif /* CONFIG_LP_CONSOLE */
 151
 152 #undef LP_DEBUG
 153
 154 /* Bits used to manage claiming the parport device */
 155 #define LP_PREEMPT_REQUEST 1
 156 #define LP_PARPORT_CLAIMED 2
 157
 158 /* --- low-level port access ----------------------------------- */
 159
 160 #define r_dtr(x)        (parport_read_data(lp_table[(x)].dev->port))
 161 #define r_str(x)        (parport_read_status(lp_table[(x)].dev->port))
 162 #define w_ctr(x,y)      do { parport_write_control(lp_table[(x)].dev->port, (y)); } while (0)
 163 #define w_dtr(x,y)      do { parport_write_data(lp_table[(x)].dev->port, (y)); } while (0)
 164
 165 /* Claim the parport or block trying unless we've already claimed it */
 166 static void lp_claim_parport_or_block(struct lp_struct *this_lp)
 167 {
 168         if (!test_and_set_bit(LP_PARPORT_CLAIMED, &this_lp->bits)) {
 169                 parport_claim_or_block (this_lp->dev);
 170         }
 171 }
 172
 173 /* Claim the parport or block trying unless we've already claimed it */
 174 static void lp_release_parport(struct lp_struct *this_lp)
 175 {
 176         if (test_and_clear_bit(LP_PARPORT_CLAIMED, &this_lp->bits)) {
 177                 parport_release (this_lp->dev);
 178         }
 179 }
 180
 181
 182
 183 static int lp_preempt(void *handle)
 184 {
 185         struct lp_struct *this_lp = (struct lp_struct *)handle;
 186         set_bit(LP_PREEMPT_REQUEST, &this_lp->bits);
 187         return (1);
 188 }
 189
 190
 191 /*
 192  * Try to negotiate to a new mode; if unsuccessful negotiate to
 193  * compatibility mode.  Return the mode we ended up in.
 194  */
 195 static int lp_negotiate(struct parport * port, int mode)
 196 {
 197         if (parport_negotiate (port, mode) != 0) {
 198                 mode = IEEE1284_MODE_COMPAT;
 199                 parport_negotiate (port, mode);
 200         }
 201
 202         return (mode);
 203 }
 204
 205 static int lp_reset(int minor)
 206 {
 207         int retval;
 208         lp_claim_parport_or_block (&lp_table[minor]);
 209         w_ctr(minor, LP_PSELECP);
 210         udelay (LP_DELAY);
 211         w_ctr(minor, LP_PSELECP | LP_PINITP);
 212         retval = r_str(minor);
 213         lp_release_parport (&lp_table[minor]);
 214         return retval;
 215 }
 216
 217 static void lp_error (int minor)
 218 {
 219         DEFINE_WAIT(wait);
 220         int polling;
 221
 222         if (LP_F(minor) & LP_ABORT)
 223                 return;
 224
 225         polling = lp_table[minor].dev->port->irq == PARPORT_IRQ_NONE;
 226         if (polling) lp_release_parport (&lp_table[minor]);
 227         prepare_to_wait(&lp_table[minor].waitq, &wait, TASK_INTERRUPTIBLE);
 228         schedule_timeout(LP_TIMEOUT_POLLED);
 229         finish_wait(&lp_table[minor].waitq, &wait);
 230         if (polling) lp_claim_parport_or_block (&lp_table[minor]);
 231         else parport_yield_blocking (lp_table[minor].dev);
 232 }
 233
 234 static int lp_check_status(int minor)
 235 {
 236         int error = 0;
 237         unsigned int last = lp_table[minor].last_error;
 238         unsigned char status = r_str(minor);
 239         if ((status & LP_PERRORP) && !(LP_F(minor) & LP_CAREFUL))
 240                 /* No error. */
 241                 last = 0;
 242         else if ((status & LP_POUTPA)) {
 243                 if (last != LP_POUTPA) {
 244                         last = LP_POUTPA;
 245                         printk(KERN_INFO "lp%d out of paper\n", minor);
 246                 }
 247                 error = -ENOSPC;
 248         } else if (!(status & LP_PSELECD)) {
 249                 if (last != LP_PSELECD) {
 250                         last = LP_PSELECD;
 251                         printk(KERN_INFO "lp%d off-line\n", minor);
 252                 }
 253                 error = -EIO;
 254         } else if (!(status & LP_PERRORP)) {
 255                 if (last != LP_PERRORP) {
 256                         last = LP_PERRORP;
 257                         printk(KERN_INFO "lp%d on fire\n", minor);
 258                 }
 259                 error = -EIO;
 260         } else {
 261                 last = 0; /* Come here if LP_CAREFUL is set and no
 262                              errors are reported. */
 263         }
 264
 265         lp_table[minor].last_error = last;
 266
 267         if (last != 0)
 268                 lp_error(minor);
 269
 270         return error;
 271 }
 272
 273 static int lp_wait_ready(int minor, int nonblock)
 274 {
 275         int error = 0;
 276
 277         /* If we're not in compatibility mode, we're ready now! */
 278         if (lp_table[minor].current_mode != IEEE1284_MODE_COMPAT) {
 279           return (0);
 280         }
 281
 282         do {
 283                 error = lp_check_status (minor);
 284                 if (error && (nonblock || (LP_F(minor) & LP_ABORT)))
 285                         break;
 286                 if (signal_pending (current)) {
 287                         error = -EINTR;
 288                         break;
 289                 }
 290         } while (error);
 291         return error;
 292 }
 293
 294 static ssize_t lp_write(struct file * file, const char __user * buf,
 295                         size_t count, loff_t *ppos)
 296 {
 297         unsigned int minor = iminor(file_inode(file));
 298         struct parport *port = lp_table[minor].dev->port;
 299         char *kbuf = lp_table[minor].lp_buffer;
 300         ssize_t retv = 0;
 301         ssize_t written;
 302         size_t copy_size = count;
 303         int nonblock = ((file->f_flags & O_NONBLOCK) ||
 304                         (LP_F(minor) & LP_ABORT));
 305
 306 #ifdef LP_STATS
 307         if (time_after(jiffies, lp_table[minor].lastcall + LP_TIME(minor)))
 308                 lp_table[minor].runchars = 0;
 309
 310         lp_table[minor].lastcall = jiffies;
 311 #endif
 312
 313         /* Need to copy the data from user-space. */
 314         if (copy_size > LP_BUFFER_SIZE)
 315                 copy_size = LP_BUFFER_SIZE;
 316
 317         if (mutex_lock_interruptible(&lp_table[minor].port_mutex))
 318                 return -EINTR;
 319
 320         if (copy_from_user (kbuf, buf, copy_size)) {
 321                 retv = -EFAULT;
 322                 goto out_unlock;
 323         }
 324
 325         /* Claim Parport or sleep until it becomes available
 326          */
 327         lp_claim_parport_or_block (&lp_table[minor]);
 328         /* Go to the proper mode. */
 329         lp_table[minor].current_mode = lp_negotiate (port,
 330                                                      lp_table[minor].best_mode);
 331
 332         parport_set_timeout (lp_table[minor].dev,
 333                              (nonblock ? PARPORT_INACTIVITY_O_NONBLOCK
 334                               : lp_table[minor].timeout));
 335
 336         if ((retv = lp_wait_ready (minor, nonblock)) == 0)
 337         do {
 338                 /* Write the data. */
 339                 written = parport_write (port, kbuf, copy_size);
 340                 if (written > 0) {
 341                         copy_size -= written;
 342                         count -= written;
 343                         buf  += written;
 344                         retv += written;
 345                 }
 346
 347                 if (signal_pending (current)) {
 348                         if (retv == 0)
 349                                 retv = -EINTR;
 350
 351                         break;
 352                 }
 353
 354                 if (copy_size > 0) {
 355                         /* incomplete write -> check error ! */
 356                         int error;
 357
 358                         parport_negotiate (lp_table[minor].dev->port,
 359                                            IEEE1284_MODE_COMPAT);
 360                         lp_table[minor].current_mode = IEEE1284_MODE_COMPAT;
 361
 362                         error = lp_wait_ready (minor, nonblock);
 363
 364                         if (error) {
 365                                 if (retv == 0)
 366                                         retv = error;
 367                                 break;
 368                         } else if (nonblock) {
 369                                 if (retv == 0)
 370                                         retv = -EAGAIN;
 371                                 break;
 372                         }
 373
 374                         parport_yield_blocking (lp_table[minor].dev);
 375                         lp_table[minor].current_mode
 376                           = lp_negotiate (port,
 377                                           lp_table[minor].best_mode);
 378
 379                 } else if (need_resched())
 380                         schedule ();
 381
 382                 if (count) {
 383                         copy_size = count;
 384                         if (copy_size > LP_BUFFER_SIZE)
 385                                 copy_size = LP_BUFFER_SIZE;
 386
 387                         if (copy_from_user(kbuf, buf, copy_size)) {
 388                                 if (retv == 0)
 389                                         retv = -EFAULT;
 390                                 break;
 391                         }
 392                 }
 393         } while (count > 0);
 394
 395         if (test_and_clear_bit(LP_PREEMPT_REQUEST,
 396                                &lp_table[minor].bits)) {
 397                 printk(KERN_INFO "lp%d releasing parport\n", minor);
 398                 parport_negotiate (lp_table[minor].dev->port,
 399                                    IEEE1284_MODE_COMPAT);
 400                 lp_table[minor].current_mode = IEEE1284_MODE_COMPAT;
 401                 lp_release_parport (&lp_table[minor]);
 402         }
 403 out_unlock:
 404         mutex_unlock(&lp_table[minor].port_mutex);
 405
 406         return retv;
 407 }
 408
 409 #ifdef CONFIG_PARPORT_1284
 410
 411 /* Status readback conforming to ieee1284 */
 412 static ssize_t lp_read(struct file * file, char __user * buf,
 413                        size_t count, loff_t *ppos)
 414 {
 415         DEFINE_WAIT(wait);
 416         unsigned int minor=iminor(file_inode(file));
 417         struct parport *port = lp_table[minor].dev->port;
 418         ssize_t retval = 0;
 419         char *kbuf = lp_table[minor].lp_buffer;
 420         int nonblock = ((file->f_flags & O_NONBLOCK) ||
 421                         (LP_F(minor) & LP_ABORT));
 422
 423         if (count > LP_BUFFER_SIZE)
 424                 count = LP_BUFFER_SIZE;
 425
 426         if (mutex_lock_interruptible(&lp_table[minor].port_mutex))
 427                 return -EINTR;
 428
 429         lp_claim_parport_or_block (&lp_table[minor]);
 430
 431         parport_set_timeout (lp_table[minor].dev,
 432                              (nonblock ? PARPORT_INACTIVITY_O_NONBLOCK
 433                               : lp_table[minor].timeout));
 434
 435         parport_negotiate (lp_table[minor].dev->port, IEEE1284_MODE_COMPAT);
 436         if (parport_negotiate (lp_table[minor].dev->port,
 437                                IEEE1284_MODE_NIBBLE)) {
 438                 retval = -EIO;
 439                 goto out;
 440         }
 441
 442         while (retval == 0) {
 443                 retval = parport_read (port, kbuf, count);
 444
 445                 if (retval > 0)
 446                         break;
 447
 448                 if (nonblock) {
 449                         retval = -EAGAIN;
 450                         break;
 451                 }
 452
 453                 /* Wait for data. */
 454
 455                 if (lp_table[minor].dev->port->irq == PARPORT_IRQ_NONE) {
 456                         parport_negotiate (lp_table[minor].dev->port,
 457                                            IEEE1284_MODE_COMPAT);
 458                         lp_error (minor);
 459                         if (parport_negotiate (lp_table[minor].dev->port,
 460                                                IEEE1284_MODE_NIBBLE)) {
 461                                 retval = -EIO;
 462                                 goto out;
 463                         }
 464                 } else {
 465                         prepare_to_wait(&lp_table[minor].waitq, &wait, TASK_INTERRUPTIBLE);
 466                         schedule_timeout(LP_TIMEOUT_POLLED);
 467                         finish_wait(&lp_table[minor].waitq, &wait);
 468                 }
 469
 470                 if (signal_pending (current)) {
 471                         retval = -ERESTARTSYS;
 472                         break;
 473                 }
 474
 475                 cond_resched ();
 476         }
 477         parport_negotiate (lp_table[minor].dev->port, IEEE1284_MODE_COMPAT);
 478  out:
 479         lp_release_parport (&lp_table[minor]);
 480
 481         if (retval > 0 && copy_to_user (buf, kbuf, retval))
 482                 retval = -EFAULT;
 483
 484         mutex_unlock(&lp_table[minor].port_mutex);
 485
 486         return retval;
 487 }
 488
 489 #endif /* IEEE 1284 support */
 490
 491 static int lp_open(struct inode * inode, struct file * file)
 492 {
 493         unsigned int minor = iminor(inode);
 494         int ret = 0;
 495
 496         mutex_lock(&lp_mutex);
 497         if (minor >= LP_NO) {
 498                 ret = -ENXIO;
 499                 goto out;
 500         }
 501         if ((LP_F(minor) & LP_EXIST) == 0) {
 502                 ret = -ENXIO;
 503                 goto out;
 504         }
 505         if (test_and_set_bit(LP_BUSY_BIT_POS, &LP_F(minor))) {
 506                 ret = -EBUSY;
 507                 goto out;
 508         }
 509         /* If ABORTOPEN is set and the printer is offline or out of paper,
 510            we may still want to open it to perform ioctl()s.  Therefore we
 511            have commandeered O_NONBLOCK, even though it is being used in
 512            a non-standard manner.  This is strictly a Linux hack, and
 513            should most likely only ever be used by the tunelp application. */
 514         if ((LP_F(minor) & LP_ABORTOPEN) && !(file->f_flags & O_NONBLOCK)) {
 515                 int status;
 516                 lp_claim_parport_or_block (&lp_table[minor]);
 517                 status = r_str(minor);
 518                 lp_release_parport (&lp_table[minor]);
 519                 if (status & LP_POUTPA) {
 520                         printk(KERN_INFO "lp%d out of paper\n", minor);
 521                         LP_F(minor) &= ~LP_BUSY;
 522                         ret = -ENOSPC;
 523                         goto out;
 524                 } else if (!(status & LP_PSELECD)) {
 525                         printk(KERN_INFO "lp%d off-line\n", minor);
 526                         LP_F(minor) &= ~LP_BUSY;
 527                         ret = -EIO;
 528                         goto out;
 529                 } else if (!(status & LP_PERRORP)) {
 530                         printk(KERN_ERR "lp%d printer error\n", minor);
 531                         LP_F(minor) &= ~LP_BUSY;
 532                         ret = -EIO;
 533                         goto out;
 534                 }
 535         }
 536         lp_table[minor].lp_buffer = kmalloc(LP_BUFFER_SIZE, GFP_KERNEL);
 537         if (!lp_table[minor].lp_buffer) {
 538                 LP_F(minor) &= ~LP_BUSY;
 539                 ret = -ENOMEM;
 540                 goto out;
 541         }
 542         /* Determine if the peripheral supports ECP mode */
 543         lp_claim_parport_or_block (&lp_table[minor]);
 544         if ( (lp_table[minor].dev->port->modes & PARPORT_MODE_ECP) &&
 545              !parport_negotiate (lp_table[minor].dev->port,
 546                                  IEEE1284_MODE_ECP)) {
 547                 printk (KERN_INFO "lp%d: ECP mode\n", minor);
 548                 lp_table[minor].best_mode = IEEE1284_MODE_ECP;
 549         } else {
 550                 lp_table[minor].best_mode = IEEE1284_MODE_COMPAT;
 551         }
 552         /* Leave peripheral in compatibility mode */
 553         parport_negotiate (lp_table[minor].dev->port, IEEE1284_MODE_COMPAT);
 554         lp_release_parport (&lp_table[minor]);
 555         lp_table[minor].current_mode = IEEE1284_MODE_COMPAT;
 556 out:
 557         mutex_unlock(&lp_mutex);
 558         return ret;
 559 }
 560
 561 static int lp_release(struct inode * inode, struct file * file)
 562 {
 563         unsigned int minor = iminor(inode);
 564
 565         lp_claim_parport_or_block (&lp_table[minor]);
 566         parport_negotiate (lp_table[minor].dev->port, IEEE1284_MODE_COMPAT);
 567         lp_table[minor].current_mode = IEEE1284_MODE_COMPAT;
 568         lp_release_parport (&lp_table[minor]);
 569         kfree(lp_table[minor].lp_buffer);
 570         lp_table[minor].lp_buffer = NULL;
 571         LP_F(minor) &= ~LP_BUSY;
 572         return 0;
 573 }
 574
 575 static int lp_do_ioctl(unsigned int minor, unsigned int cmd,
 576         unsigned long arg, void __user *argp)
 577 {
 578         int status;
 579         int retval = 0;
 580
 581 #ifdef LP_DEBUG
 582         printk(KERN_DEBUG "lp%d ioctl, cmd: 0x%x, arg: 0x%lx\n", minor, cmd, arg);
 583 #endif
 584         if (minor >= LP_NO)
 585                 return -ENODEV;
 586         if ((LP_F(minor) & LP_EXIST) == 0)
 587                 return -ENODEV;
 588         switch ( cmd ) {
 589                 case LPTIME:
 590                         if (arg > UINT_MAX / HZ)
 591                                 return -EINVAL;
 592                         LP_TIME(minor) = arg * HZ/100;
 593                         break;
 594                 case LPCHAR:
 595                         LP_CHAR(minor) = arg;
 596                         break;
 597                 case LPABORT:
 598                         if (arg)
 599                                 LP_F(minor) |= LP_ABORT;
 600                         else
 601                                 LP_F(minor) &= ~LP_ABORT;
 602                         break;
 603                 case LPABORTOPEN:
 604                         if (arg)
 605                                 LP_F(minor) |= LP_ABORTOPEN;
 606                         else
 607                                 LP_F(minor) &= ~LP_ABORTOPEN;
 608                         break;
 609                 case LPCAREFUL:
 610                         if (arg)
 611                                 LP_F(minor) |= LP_CAREFUL;
 612                         else
 613                                 LP_F(minor) &= ~LP_CAREFUL;
 614                         break;
 615                 case LPWAIT:
 616                         LP_WAIT(minor) = arg;
 617                         break;
 618                 case LPSETIRQ:
 619                         return -EINVAL;
 620                         break;
 621                 case LPGETIRQ:
 622                         if (copy_to_user(argp, &LP_IRQ(minor),
 623                                         sizeof(int)))
 624                                 return -EFAULT;
 625                         break;
 626                 case LPGETSTATUS:
 627                         if (mutex_lock_interruptible(&lp_table[minor].port_mutex))
 628                                 return -EINTR;
 629                         lp_claim_parport_or_block (&lp_table[minor]);
 630                         status = r_str(minor);
 631                         lp_release_parport (&lp_table[minor]);
 632                         mutex_unlock(&lp_table[minor].port_mutex);
 633
 634                         if (copy_to_user(argp, &status, sizeof(int)))
 635                                 return -EFAULT;
 636                         break;
 637                 case LPRESET:
 638                         lp_reset(minor);
 639                         break;
 640 #ifdef LP_STATS
 641                 case LPGETSTATS:
 642                         if (copy_to_user(argp, &LP_STAT(minor),
 643                                         sizeof(struct lp_stats)))
 644                                 return -EFAULT;
 645                         if (capable(CAP_SYS_ADMIN))
 646                                 memset(&LP_STAT(minor), 0,
 647                                                 sizeof(struct lp_stats));
 648                         break;
 649 #endif
 650                 case LPGETFLAGS:
 651                         status = LP_F(minor);
 652                         if (copy_to_user(argp, &status, sizeof(int)))
 653                                 return -EFAULT;
 654                         break;
 655
 656                 default:
 657                         retval = -EINVAL;
 658         }
 659         return retval;
 660 }
 661
 662 static int lp_set_timeout(unsigned int minor, struct timeval *par_timeout)
 663 {
 664         long to_jiffies;
 665
 666         /* Convert to jiffies, place in lp_table */
 667         if ((par_timeout->tv_sec < 0) ||
 668             (par_timeout->tv_usec < 0)) {
 669                 return -EINVAL;
 670         }
 671         to_jiffies = DIV_ROUND_UP(par_timeout->tv_usec, 1000000/HZ);
 672         to_jiffies += par_timeout->tv_sec * (long) HZ;
 673         if (to_jiffies <= 0) {
 674                 return -EINVAL;
 675         }
 676         lp_table[minor].timeout = to_jiffies;
 677         return 0;
 678 }
 679
 680 static long lp_ioctl(struct file *file, unsigned int cmd,
 681                         unsigned long arg)
 682 {
 683         unsigned int minor;
 684         struct timeval par_timeout;
 685         int ret;
 686
 687         minor = iminor(file_inode(file));
 688         mutex_lock(&lp_mutex);
 689         switch (cmd) {
 690         case LPSETTIMEOUT:
 691                 if (copy_from_user(&par_timeout, (void __user *)arg,
 692                                         sizeof (struct timeval))) {
 693                         ret = -EFAULT;
 694                         break;
 695                 }
 696                 ret = lp_set_timeout(minor, &par_timeout);
 697                 break;
 698         default:
 699                 ret = lp_do_ioctl(minor, cmd, arg, (void __user *)arg);
 700                 break;
 701         }
 702         mutex_unlock(&lp_mutex);
 703
 704         return ret;
 705 }
 706
 707 #ifdef CONFIG_COMPAT
 708 static long lp_compat_ioctl(struct file *file, unsigned int cmd,
 709                         unsigned long arg)
 710 {
 711         unsigned int minor;
 712         struct timeval par_timeout;
 713         int ret;
 714
 715         minor = iminor(file_inode(file));
 716         mutex_lock(&lp_mutex);
 717         switch (cmd) {
 718         case LPSETTIMEOUT:
 719                 if (compat_get_timeval(&par_timeout, compat_ptr(arg))) {
 720                         ret = -EFAULT;
 721                         break;
 722                 }
 723                 ret = lp_set_timeout(minor, &par_timeout);
 724                 break;
 725 #ifdef LP_STATS
 726         case LPGETSTATS:
 727                 /* FIXME: add an implementation if you set LP_STATS */
 728                 ret = -EINVAL;
 729                 break;
 730 #endif
 731         default:
 732                 ret = lp_do_ioctl(minor, cmd, arg, compat_ptr(arg));
 733                 break;
 734         }
 735         mutex_unlock(&lp_mutex);
 736
 737         return ret;
 738 }
 739 #endif
 740
 741 static const struct file_operations lp_fops = {
 742         .owner          = THIS_MODULE,
 743         .write          = lp_write,
 744         .unlocked_ioctl = lp_ioctl,
 745 #ifdef CONFIG_COMPAT
 746         .compat_ioctl   = lp_compat_ioctl,
 747 #endif
 748         .open           = lp_open,
 749         .release        = lp_release,
 750 #ifdef CONFIG_PARPORT_1284
 751         .read           = lp_read,
 752 #endif
 753         .llseek         = noop_llseek,
 754 };
 755
 756 /* --- support for console on the line printer ----------------- */
 757
 758 #ifdef CONFIG_LP_CONSOLE
 759
 760 #define CONSOLE_LP 0
 761
 762 /* If the printer is out of paper, we can either lose the messages or
 763  * stall until the printer is happy again.  Define CONSOLE_LP_STRICT
 764  * non-zero to get the latter behaviour. */
 765 #define CONSOLE_LP_STRICT 1
 766
 767 /* The console must be locked when we get here. */
 768
 769 static void lp_console_write (struct console *co, const char *s,
 770                               unsigned count)
 771 {
 772         struct pardevice *dev = lp_table[CONSOLE_LP].dev;
 773         struct parport *port = dev->port;
 774         ssize_t written;
 775
 776         if (parport_claim (dev))
 777                 /* Nothing we can do. */
 778                 return;
 779
 780         parport_set_timeout (dev, 0);
 781
 782         /* Go to compatibility mode. */
 783         parport_negotiate (port, IEEE1284_MODE_COMPAT);
 784
 785         do {
 786                 /* Write the data, converting LF->CRLF as we go. */
 787                 ssize_t canwrite = count;
 788                 char *lf = memchr (s, '\n', count);
 789                 if (lf)
 790                         canwrite = lf - s;
 791
 792                 if (canwrite > 0) {
 793                         written = parport_write (port, s, canwrite);
 794
 795                         if (written <= 0)
 796                                 continue;
 797
 798                         s += written;
 799                         count -= written;
 800                         canwrite -= written;
 801                 }
 802
 803                 if (lf && canwrite <= 0) {
 804                         const char *crlf = "\r\n";
 805                         int i = 2;
 806
 807                         /* Dodge the original '\n', and put '\r\n' instead. */
 808                         s++;
 809                         count--;
 810                         do {
 811                                 written = parport_write (port, crlf, i);
 812                                 if (written > 0)
 813                                         i -= written, crlf += written;
 814                         } while (i > 0 && (CONSOLE_LP_STRICT || written > 0));
 815                 }
 816         } while (count > 0 && (CONSOLE_LP_STRICT || written > 0));
 817
 818         parport_release (dev);
 819 }
 820
 821 static struct console lpcons = {
 822         .name           = "lp",
 823         .write          = lp_console_write,
 824         .flags          = CON_PRINTBUFFER,
 825 };
 826
 827 #endif /* console on line printer */
 828
 829 /* --- initialisation code ------------------------------------- */
 830
 831 static int parport_nr[LP_NO] = { [0 ... LP_NO-1] = LP_PARPORT_UNSPEC };
 832 static char *parport[LP_NO];
 833 static bool reset;
 834
 835 module_param_array(parport, charp, NULL, 0);
 836 module_param(reset, bool, 0);
 837
 838 #ifndef MODULE
 839 static int __init lp_setup (char *str)
 840 {
 841         static int parport_ptr;
 842         int x;
 843
 844         if (get_option(&str, &x)) {
 845                 if (x == 0) {
 846                         /* disable driver on "lp=" or "lp=0" */
 847                         parport_nr[0] = LP_PARPORT_OFF;
 848                 } else {
 849                         printk(KERN_WARNING "warning: 'lp=0x%x' is deprecated, ignored\n", x);
 850                         return 0;
 851                 }
 852         } else if (!strncmp(str, "parport", 7)) {
 853                 int n = simple_strtoul(str+7, NULL, 10);
 854                 if (parport_ptr < LP_NO)
 855                         parport_nr[parport_ptr++] = n;
 856                 else
 857                         printk(KERN_INFO "lp: too many ports, %s ignored.\n",
 858                                str);
 859         } else if (!strcmp(str, "auto")) {
 860                 parport_nr[0] = LP_PARPORT_AUTO;
 861         } else if (!strcmp(str, "none")) {
 862                 parport_nr[parport_ptr++] = LP_PARPORT_NONE;
 863         } else if (!strcmp(str, "reset")) {
 864                 reset = 1;
 865         }
 866         return 1;
 867 }
 868 #endif
 869
 870 static int lp_register(int nr, struct parport *port)
 871 {
 872         lp_table[nr].dev = parport_register_device(port, "lp",
 873                                                    lp_preempt, NULL, NULL, 0,
 874                                                    (void *) &lp_table[nr]);
 875         if (lp_table[nr].dev == NULL)
 876                 return 1;
 877         lp_table[nr].flags |= LP_EXIST;
 878
 879         if (reset)
 880                 lp_reset(nr);
 881
 882         device_create(lp_class, port->dev, MKDEV(LP_MAJOR, nr), NULL,
 883                       "lp%d", nr);
 884
 885         printk(KERN_INFO "lp%d: using %s (%s).\n", nr, port->name,
 886                (port->irq == PARPORT_IRQ_NONE)?"polling":"interrupt-driven");
 887
 888 #ifdef CONFIG_LP_CONSOLE
 889         if (!nr) {
 890                 if (port->modes & PARPORT_MODE_SAFEININT) {
 891                         register_console(&lpcons);
 892                         console_registered = port;
 893                         printk (KERN_INFO "lp%d: console ready\n", CONSOLE_LP);
 894                 } else
 895                         printk (KERN_ERR "lp%d: cannot run console on %s\n",
 896                                 CONSOLE_LP, port->name);
 897         }
 898 #endif
 899
 900         return 0;
 901 }
 902
 903 static void lp_attach (struct parport *port)
 904 {
 905         unsigned int i;
 906
 907         switch (parport_nr[0]) {
 908         case LP_PARPORT_UNSPEC:
 909         case LP_PARPORT_AUTO:
 910                 if (parport_nr[0] == LP_PARPORT_AUTO &&
 911                     port->probe_info[0].class != PARPORT_CLASS_PRINTER)
 912                         return;
 913                 if (lp_count == LP_NO) {
 914                         printk(KERN_INFO "lp: ignoring parallel port (max. %d)\n",LP_NO);
 915                         return;
 916                 }
 917                 if (!lp_register(lp_count, port))
 918                         lp_count++;
 919                 break;
 920
 921         default:
 922                 for (i = 0; i < LP_NO; i++) {
 923                         if (port->number == parport_nr[i]) {
 924                                 if (!lp_register(i, port))
 925                                         lp_count++;
 926                                 break;
 927                         }
 928                 }
 929                 break;
 930         }
 931 }
 932
 933 static void lp_detach (struct parport *port)
 934 {
 935         /* Write this some day. */
 936 #ifdef CONFIG_LP_CONSOLE
 937         if (console_registered == port) {
 938                 unregister_console(&lpcons);
 939                 console_registered = NULL;
 940         }
 941 #endif /* CONFIG_LP_CONSOLE */
 942 }
 943
 944 static struct parport_driver lp_driver = {
 945         .name = "lp",
 946         .attach = lp_attach,
 947         .detach = lp_detach,
 948 };
 949
 950 static int __init lp_init (void)
 951 {
 952         int i, err = 0;
 953
 954         if (parport_nr[0] == LP_PARPORT_OFF)
 955                 return 0;
 956
 957         for (i = 0; i < LP_NO; i++) {
 958                 lp_table[i].dev = NULL;
 959                 lp_table[i].flags = 0;
 960                 lp_table[i].chars = LP_INIT_CHAR;
 961                 lp_table[i].time = LP_INIT_TIME;
 962                 lp_table[i].wait = LP_INIT_WAIT;
 963                 lp_table[i].lp_buffer = NULL;
 964 #ifdef LP_STATS
 965                 lp_table[i].lastcall = 0;
 966                 lp_table[i].runchars = 0;
 967                 memset (&lp_table[i].stats, 0, sizeof (struct lp_stats));
 968 #endif
 969                 lp_table[i].last_error = 0;
 970                 init_waitqueue_head (&lp_table[i].waitq);
 971                 init_waitqueue_head (&lp_table[i].dataq);
 972                 mutex_init(&lp_table[i].port_mutex);
 973                 lp_table[i].timeout = 10 * HZ;
 974         }
 975
 976         if (register_chrdev (LP_MAJOR, "lp", &lp_fops)) {
 977                 printk (KERN_ERR "lp: unable to get major %d\n", LP_MAJOR);
 978                 return -EIO;
 979         }
 980
 981         lp_class = class_create(THIS_MODULE, "printer");
 982         if (IS_ERR(lp_class)) {
 983                 err = PTR_ERR(lp_class);
 984                 goto out_reg;
 985         }
 986
 987         if (parport_register_driver (&lp_driver)) {
 988                 printk (KERN_ERR "lp: unable to register with parport\n");
 989                 err = -EIO;
 990                 goto out_class;
 991         }
 992
 993         if (!lp_count) {
 994                 printk (KERN_INFO "lp: driver loaded but no devices found\n");
 995 #ifndef CONFIG_PARPORT_1284
 996                 if (parport_nr[0] == LP_PARPORT_AUTO)
 997                         printk (KERN_INFO "lp: (is IEEE 1284 support enabled?)\n");
 998 #endif
 999         }
1000
1001         return 0;
1002
1003 out_class:
1004         class_destroy(lp_class);
1005 out_reg:
1006         unregister_chrdev(LP_MAJOR, "lp");
1007         return err;
1008 }
1009
1010 static int __init lp_init_module (void)
1011 {
1012         if (parport[0]) {
1013                 /* The user gave some parameters.  Let's see what they were.  */
1014                 if (!strncmp(parport[0], "auto", 4))
1015                         parport_nr[0] = LP_PARPORT_AUTO;
1016                 else {
1017                         int n;
1018                         for (n = 0; n < LP_NO && parport[n]; n++) {
1019                                 if (!strncmp(parport[n], "none", 4))
1020                                         parport_nr[n] = LP_PARPORT_NONE;
1021                                 else {
1022                                         char *ep;
1023                                         unsigned long r = simple_strtoul(parport[n], &ep, 0);
1024                                         if (ep != parport[n])
1025                                                 parport_nr[n] = r;
1026                                         else {
1027                                                 printk(KERN_ERR "lp: bad port specifier `%s'\n", parport[n]);
1028                                                 return -ENODEV;
1029                                         }
1030                                 }
1031                         }
1032                 }
1033         }
1034
1035         return lp_init();
1036 }
1037
1038 static void lp_cleanup_module (void)
1039 {
1040         unsigned int offset;
1041
1042         parport_unregister_driver (&lp_driver);
1043
1044 #ifdef CONFIG_LP_CONSOLE
1045         unregister_console (&lpcons);
1046 #endif
1047
1048         unregister_chrdev(LP_MAJOR, "lp");
1049         for (offset = 0; offset < LP_NO; offset++) {
1050                 if (lp_table[offset].dev == NULL)
1051                         continue;
1052                 parport_unregister_device(lp_table[offset].dev);
1053                 device_destroy(lp_class, MKDEV(LP_MAJOR, offset));
1054         }
1055         class_destroy(lp_class);
1056 }
1057
1058 __setup("lp=", lp_setup);
1059 module_init(lp_init_module);
1060 module_exit(lp_cleanup_module);
1061
1062 MODULE_ALIAS_CHARDEV_MAJOR(LP_MAJOR);
1063 MODULE_LICENSE("GPL");