3 * Copyright (C) 2014 Jason Baron <jbaron@akamai.com>
5 * Support for the E3-1200 processor family. Heavily based on previous
8 * Since the DRAM controller is on the cpu chip, we can use its PCI device
9 * id to identify these processors.
11 * PCI DRAM controller device ids (Taken from The PCI ID Repository - http://pci-ids.ucw.cz/)
13 * 0108: Xeon E3-1200 Processor Family DRAM Controller
14 * 010c: Xeon E3-1200/2nd Generation Core Processor Family DRAM Controller
15 * 0150: Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller
16 * 0158: Xeon E3-1200 v2/Ivy Bridge DRAM Controller
17 * 015c: Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller
18 * 0c04: Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller
19 * 0c08: Xeon E3-1200 v3 Processor DRAM Controller
21 * Based on Intel specification:
22 * http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e3-1200v3-vol-2-datasheet.pdf
23 * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e3-1200-family-vol-2-datasheet.html
25 * According to the above datasheet (p.16):
27 * 6. Software must not access B0/D0/F0 32-bit memory-mapped registers with
28 * requests that cross a DW boundary.
31 * Thus, we make use of the explicit: lo_hi_readq(), which breaks the readq into
32 * 2 readl() calls. This restriction may be lifted in subsequent chip releases,
33 * but lo_hi_readq() ensures that we are safe across all e3-1200 processors.
36 #include <linux/module.h>
37 #include <linux/init.h>
38 #include <linux/pci.h>
39 #include <linux/pci_ids.h>
40 #include <linux/edac.h>
42 #include <linux/io-64-nonatomic-lo-hi.h>
43 #include "edac_core.h"
45 #define IE31200_REVISION "1.0"
46 #define EDAC_MOD_STR "ie31200_edac"
48 #define ie31200_printk(level, fmt, arg...) \
49 edac_printk(level, "ie31200", fmt, ##arg)
51 #define PCI_DEVICE_ID_INTEL_IE31200_HB_1 0x0108
52 #define PCI_DEVICE_ID_INTEL_IE31200_HB_2 0x010c
53 #define PCI_DEVICE_ID_INTEL_IE31200_HB_3 0x0150
54 #define PCI_DEVICE_ID_INTEL_IE31200_HB_4 0x0158
55 #define PCI_DEVICE_ID_INTEL_IE31200_HB_5 0x015c
56 #define PCI_DEVICE_ID_INTEL_IE31200_HB_6 0x0c04
57 #define PCI_DEVICE_ID_INTEL_IE31200_HB_7 0x0c08
59 #define IE31200_DIMMS 4
60 #define IE31200_RANKS 8
61 #define IE31200_RANKS_PER_CHANNEL 4
62 #define IE31200_DIMMS_PER_CHANNEL 2
63 #define IE31200_CHANNELS 2
65 /* Intel IE31200 register addresses - device 0 function 0 - DRAM Controller */
66 #define IE31200_MCHBAR_LOW 0x48
67 #define IE31200_MCHBAR_HIGH 0x4c
68 #define IE31200_MCHBAR_MASK GENMASK_ULL(38, 15)
69 #define IE31200_MMR_WINDOW_SIZE BIT(15)
72 * Error Status Register (16b)
75 * 14 Isochronous TBWRR Run Behind FIFO Full
77 * 13 Isochronous TBWRR Run Behind FIFO Put
80 * 11 MCH Thermal Sensor Event
81 * for SMI/SCI/SERR (GTSE)
83 * 9 LOCK to non-DRAM Memory Flag (LCKF)
85 * 7 DRAM Throttle Flag (DTF)
87 * 1 Multi-bit DRAM ECC Error Flag (DMERR)
88 * 0 Single-bit DRAM ECC Error Flag (DSERR)
90 #define IE31200_ERRSTS 0xc8
91 #define IE31200_ERRSTS_UE BIT(1)
92 #define IE31200_ERRSTS_CE BIT(0)
93 #define IE31200_ERRSTS_BITS (IE31200_ERRSTS_UE | IE31200_ERRSTS_CE)
96 * Channel 0 ECC Error Log (64b)
98 * 63:48 Error Column Address (ERRCOL)
99 * 47:32 Error Row Address (ERRROW)
100 * 31:29 Error Bank Address (ERRBANK)
101 * 28:27 Error Rank Address (ERRRANK)
103 * 23:16 Error Syndrome (ERRSYND)
105 * 1 Multiple Bit Error Status (MERRSTS)
106 * 0 Correctable Error Status (CERRSTS)
108 #define IE31200_C0ECCERRLOG 0x40c8
109 #define IE31200_C1ECCERRLOG 0x44c8
110 #define IE31200_ECCERRLOG_CE BIT(0)
111 #define IE31200_ECCERRLOG_UE BIT(1)
112 #define IE31200_ECCERRLOG_RANK_BITS GENMASK_ULL(28, 27)
113 #define IE31200_ECCERRLOG_RANK_SHIFT 27
114 #define IE31200_ECCERRLOG_SYNDROME_BITS GENMASK_ULL(23, 16)
115 #define IE31200_ECCERRLOG_SYNDROME_SHIFT 16
117 #define IE31200_ECCERRLOG_SYNDROME(log) \
118 ((log & IE31200_ECCERRLOG_SYNDROME_BITS) >> \
119 IE31200_ECCERRLOG_SYNDROME_SHIFT)
121 #define IE31200_CAPID0 0xe4
122 #define IE31200_CAPID0_PDCD BIT(4)
123 #define IE31200_CAPID0_DDPCD BIT(6)
124 #define IE31200_CAPID0_ECC BIT(1)
126 #define IE31200_MAD_DIMM_0_OFFSET 0x5004
127 #define IE31200_MAD_DIMM_SIZE GENMASK_ULL(7, 0)
128 #define IE31200_MAD_DIMM_A_RANK BIT(17)
129 #define IE31200_MAD_DIMM_A_WIDTH BIT(19)
131 #define IE31200_PAGES(n) (n << (28 - PAGE_SHIFT))
133 static int nr_channels
;
135 struct ie31200_priv
{
136 void __iomem
*window
;
143 struct ie31200_dev_info
{
144 const char *ctl_name
;
147 struct ie31200_error_info
{
150 u64 eccerrlog
[IE31200_CHANNELS
];
153 static const struct ie31200_dev_info ie31200_devs
[] = {
155 .ctl_name
= "IE31200"
160 u8 size
; /* in 256MB multiples */
162 x16_width
: 1; /* 0 means x8 width */
165 static int how_many_channels(struct pci_dev
*pdev
)
168 unsigned char capid0_2b
; /* 2nd byte of CAPID0 */
170 pci_read_config_byte(pdev
, IE31200_CAPID0
+ 1, &capid0_2b
);
172 /* check PDCD: Dual Channel Disable */
173 if (capid0_2b
& IE31200_CAPID0_PDCD
) {
174 edac_dbg(0, "In single channel mode\n");
177 edac_dbg(0, "In dual channel mode\n");
181 /* check DDPCD - check if both channels are filled */
182 if (capid0_2b
& IE31200_CAPID0_DDPCD
)
183 edac_dbg(0, "2 DIMMS per channel disabled\n");
185 edac_dbg(0, "2 DIMMS per channel enabled\n");
190 static bool ecc_capable(struct pci_dev
*pdev
)
192 unsigned char capid0_4b
; /* 4th byte of CAPID0 */
194 pci_read_config_byte(pdev
, IE31200_CAPID0
+ 3, &capid0_4b
);
195 if (capid0_4b
& IE31200_CAPID0_ECC
)
200 static int eccerrlog_row(int channel
, u64 log
)
202 int rank
= ((log
& IE31200_ECCERRLOG_RANK_BITS
) >>
203 IE31200_ECCERRLOG_RANK_SHIFT
);
204 return rank
| (channel
* IE31200_RANKS_PER_CHANNEL
);
207 static void ie31200_clear_error_info(struct mem_ctl_info
*mci
)
210 * Clear any error bits.
211 * (Yes, we really clear bits by writing 1 to them.)
213 pci_write_bits16(to_pci_dev(mci
->pdev
), IE31200_ERRSTS
,
214 IE31200_ERRSTS_BITS
, IE31200_ERRSTS_BITS
);
217 static void ie31200_get_and_clear_error_info(struct mem_ctl_info
*mci
,
218 struct ie31200_error_info
*info
)
220 struct pci_dev
*pdev
;
221 struct ie31200_priv
*priv
= mci
->pvt_info
;
222 void __iomem
*window
= priv
->window
;
224 pdev
= to_pci_dev(mci
->pdev
);
227 * This is a mess because there is no atomic way to read all the
228 * registers at once and the registers can transition from CE being
231 pci_read_config_word(pdev
, IE31200_ERRSTS
, &info
->errsts
);
232 if (!(info
->errsts
& IE31200_ERRSTS_BITS
))
235 info
->eccerrlog
[0] = lo_hi_readq(window
+ IE31200_C0ECCERRLOG
);
236 if (nr_channels
== 2)
237 info
->eccerrlog
[1] = lo_hi_readq(window
+ IE31200_C1ECCERRLOG
);
239 pci_read_config_word(pdev
, IE31200_ERRSTS
, &info
->errsts2
);
242 * If the error is the same for both reads then the first set
243 * of reads is valid. If there is a change then there is a CE
244 * with no info and the second set of reads is valid and
247 if ((info
->errsts
^ info
->errsts2
) & IE31200_ERRSTS_BITS
) {
248 info
->eccerrlog
[0] = lo_hi_readq(window
+ IE31200_C0ECCERRLOG
);
249 if (nr_channels
== 2)
251 lo_hi_readq(window
+ IE31200_C1ECCERRLOG
);
254 ie31200_clear_error_info(mci
);
257 static void ie31200_process_error_info(struct mem_ctl_info
*mci
,
258 struct ie31200_error_info
*info
)
263 if (!(info
->errsts
& IE31200_ERRSTS_BITS
))
266 if ((info
->errsts
^ info
->errsts2
) & IE31200_ERRSTS_BITS
) {
267 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED
, mci
, 1, 0, 0, 0,
268 -1, -1, -1, "UE overwrote CE", "");
269 info
->errsts
= info
->errsts2
;
272 for (channel
= 0; channel
< nr_channels
; channel
++) {
273 log
= info
->eccerrlog
[channel
];
274 if (log
& IE31200_ECCERRLOG_UE
) {
275 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED
, mci
, 1,
277 eccerrlog_row(channel
, log
),
280 } else if (log
& IE31200_ECCERRLOG_CE
) {
281 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED
, mci
, 1,
283 IE31200_ECCERRLOG_SYNDROME(log
),
284 eccerrlog_row(channel
, log
),
291 static void ie31200_check(struct mem_ctl_info
*mci
)
293 struct ie31200_error_info info
;
295 edac_dbg(1, "MC%d\n", mci
->mc_idx
);
296 ie31200_get_and_clear_error_info(mci
, &info
);
297 ie31200_process_error_info(mci
, &info
);
300 static void __iomem
*ie31200_map_mchbar(struct pci_dev
*pdev
)
309 void __iomem
*window
;
311 pci_read_config_dword(pdev
, IE31200_MCHBAR_LOW
, &u
.mchbar_low
);
312 pci_read_config_dword(pdev
, IE31200_MCHBAR_HIGH
, &u
.mchbar_high
);
313 u
.mchbar
&= IE31200_MCHBAR_MASK
;
315 if (u
.mchbar
!= (resource_size_t
)u
.mchbar
) {
316 ie31200_printk(KERN_ERR
, "mmio space beyond accessible range (0x%llx)\n",
317 (unsigned long long)u
.mchbar
);
321 window
= ioremap_nocache(u
.mchbar
, IE31200_MMR_WINDOW_SIZE
);
323 ie31200_printk(KERN_ERR
, "Cannot map mmio space at 0x%llx\n",
324 (unsigned long long)u
.mchbar
);
329 static int ie31200_probe1(struct pci_dev
*pdev
, int dev_idx
)
332 struct mem_ctl_info
*mci
= NULL
;
333 struct edac_mc_layer layers
[2];
334 struct dimm_data dimm_info
[IE31200_CHANNELS
][IE31200_DIMMS_PER_CHANNEL
];
335 void __iomem
*window
;
336 struct ie31200_priv
*priv
;
339 edac_dbg(0, "MC:\n");
341 if (!ecc_capable(pdev
)) {
342 ie31200_printk(KERN_INFO
, "No ECC support\n");
346 nr_channels
= how_many_channels(pdev
);
347 layers
[0].type
= EDAC_MC_LAYER_CHIP_SELECT
;
348 layers
[0].size
= IE31200_DIMMS
;
349 layers
[0].is_virt_csrow
= true;
350 layers
[1].type
= EDAC_MC_LAYER_CHANNEL
;
351 layers
[1].size
= nr_channels
;
352 layers
[1].is_virt_csrow
= false;
353 mci
= edac_mc_alloc(0, ARRAY_SIZE(layers
), layers
,
354 sizeof(struct ie31200_priv
));
358 window
= ie31200_map_mchbar(pdev
);
364 edac_dbg(3, "MC: init mci\n");
365 mci
->pdev
= &pdev
->dev
;
366 mci
->mtype_cap
= MEM_FLAG_DDR3
;
367 mci
->edac_ctl_cap
= EDAC_FLAG_SECDED
;
368 mci
->edac_cap
= EDAC_FLAG_SECDED
;
369 mci
->mod_name
= EDAC_MOD_STR
;
370 mci
->mod_ver
= IE31200_REVISION
;
371 mci
->ctl_name
= ie31200_devs
[dev_idx
].ctl_name
;
372 mci
->dev_name
= pci_name(pdev
);
373 mci
->edac_check
= ie31200_check
;
374 mci
->ctl_page_to_phys
= NULL
;
375 priv
= mci
->pvt_info
;
376 priv
->window
= window
;
378 /* populate DIMM info */
379 for (i
= 0; i
< IE31200_CHANNELS
; i
++) {
380 addr_decode
= readl(window
+ IE31200_MAD_DIMM_0_OFFSET
+
382 edac_dbg(0, "addr_decode: 0x%x\n", addr_decode
);
383 for (j
= 0; j
< IE31200_DIMMS_PER_CHANNEL
; j
++) {
384 dimm_info
[i
][j
].size
= (addr_decode
>> (j
* 8)) &
385 IE31200_MAD_DIMM_SIZE
;
386 dimm_info
[i
][j
].dual_rank
= (addr_decode
&
387 (IE31200_MAD_DIMM_A_RANK
<< j
)) ? 1 : 0;
388 dimm_info
[i
][j
].x16_width
= (addr_decode
&
389 (IE31200_MAD_DIMM_A_WIDTH
<< j
)) ? 1 : 0;
390 edac_dbg(0, "size: 0x%x, rank: %d, width: %d\n",
391 dimm_info
[i
][j
].size
,
392 dimm_info
[i
][j
].dual_rank
,
393 dimm_info
[i
][j
].x16_width
);
398 * The dram rank boundary (DRB) reg values are boundary addresses
399 * for each DRAM rank with a granularity of 64MB. DRB regs are
400 * cumulative; the last one will contain the total memory
401 * contained in all ranks.
403 for (i
= 0; i
< IE31200_DIMMS_PER_CHANNEL
; i
++) {
404 for (j
= 0; j
< IE31200_CHANNELS
; j
++) {
405 struct dimm_info
*dimm
;
406 unsigned long nr_pages
;
408 nr_pages
= IE31200_PAGES(dimm_info
[j
][i
].size
);
412 if (dimm_info
[j
][i
].dual_rank
) {
413 nr_pages
= nr_pages
/ 2;
414 dimm
= EDAC_DIMM_PTR(mci
->layers
, mci
->dimms
,
415 mci
->n_layers
, (i
* 2) + 1,
417 dimm
->nr_pages
= nr_pages
;
418 edac_dbg(0, "set nr pages: 0x%lx\n", nr_pages
);
419 dimm
->grain
= 8; /* just a guess */
420 dimm
->mtype
= MEM_DDR3
;
421 dimm
->dtype
= DEV_UNKNOWN
;
422 dimm
->edac_mode
= EDAC_UNKNOWN
;
424 dimm
= EDAC_DIMM_PTR(mci
->layers
, mci
->dimms
,
425 mci
->n_layers
, i
* 2, j
, 0);
426 dimm
->nr_pages
= nr_pages
;
427 edac_dbg(0, "set nr pages: 0x%lx\n", nr_pages
);
428 dimm
->grain
= 8; /* same guess */
429 dimm
->mtype
= MEM_DDR3
;
430 dimm
->dtype
= DEV_UNKNOWN
;
431 dimm
->edac_mode
= EDAC_UNKNOWN
;
435 ie31200_clear_error_info(mci
);
437 if (edac_mc_add_mc(mci
)) {
438 edac_dbg(3, "MC: failed edac_mc_add_mc()\n");
443 /* get this far and it's successful */
444 edac_dbg(3, "MC: success\n");
456 static int ie31200_init_one(struct pci_dev
*pdev
,
457 const struct pci_device_id
*ent
)
459 edac_dbg(0, "MC:\n");
461 if (pci_enable_device(pdev
) < 0)
464 return ie31200_probe1(pdev
, ent
->driver_data
);
467 static void ie31200_remove_one(struct pci_dev
*pdev
)
469 struct mem_ctl_info
*mci
;
470 struct ie31200_priv
*priv
;
473 mci
= edac_mc_del_mc(&pdev
->dev
);
476 priv
= mci
->pvt_info
;
477 iounmap(priv
->window
);
481 static const struct pci_device_id ie31200_pci_tbl
[] = {
483 PCI_VEND_DEV(INTEL
, IE31200_HB_1
), PCI_ANY_ID
, PCI_ANY_ID
, 0, 0,
486 PCI_VEND_DEV(INTEL
, IE31200_HB_2
), PCI_ANY_ID
, PCI_ANY_ID
, 0, 0,
489 PCI_VEND_DEV(INTEL
, IE31200_HB_3
), PCI_ANY_ID
, PCI_ANY_ID
, 0, 0,
492 PCI_VEND_DEV(INTEL
, IE31200_HB_4
), PCI_ANY_ID
, PCI_ANY_ID
, 0, 0,
495 PCI_VEND_DEV(INTEL
, IE31200_HB_5
), PCI_ANY_ID
, PCI_ANY_ID
, 0, 0,
498 PCI_VEND_DEV(INTEL
, IE31200_HB_6
), PCI_ANY_ID
, PCI_ANY_ID
, 0, 0,
501 PCI_VEND_DEV(INTEL
, IE31200_HB_7
), PCI_ANY_ID
, PCI_ANY_ID
, 0, 0,
505 } /* 0 terminated list. */
507 MODULE_DEVICE_TABLE(pci
, ie31200_pci_tbl
);
509 static struct pci_driver ie31200_driver
= {
510 .name
= EDAC_MOD_STR
,
511 .probe
= ie31200_init_one
,
512 .remove
= ie31200_remove_one
,
513 .id_table
= ie31200_pci_tbl
,
516 static int __init
ie31200_init(void)
518 edac_dbg(3, "MC:\n");
519 /* Ensure that the OPSTATE is set correctly for POLL or NMI */
522 return pci_register_driver(&ie31200_driver
);
525 static void __exit
ie31200_exit(void)
527 edac_dbg(3, "MC:\n");
528 pci_unregister_driver(&ie31200_driver
);
531 module_init(ie31200_init
);
532 module_exit(ie31200_exit
);
534 MODULE_LICENSE("GPL");
535 MODULE_AUTHOR("Jason Baron <jbaron@akamai.com>");
536 MODULE_DESCRIPTION("MC support for Intel Processor E31200 memory hub controllers");