of: MSI: Simplify irqdomain lookup
[linux/fpc-iii.git] / drivers / misc / mei / hw.h
blob4cebde85924f8f33085b45e27b7df8deae17ada5
1 /*
3 * Intel Management Engine Interface (Intel MEI) Linux driver
4 * Copyright (c) 2003-2012, Intel Corporation.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 * more details.
17 #ifndef _MEI_HW_TYPES_H_
18 #define _MEI_HW_TYPES_H_
20 #include <linux/uuid.h>
23 * Timeouts in Seconds
25 #define MEI_HW_READY_TIMEOUT 2 /* Timeout on ready message */
26 #define MEI_CONNECT_TIMEOUT 3 /* HPS: at least 2 seconds */
28 #define MEI_CL_CONNECT_TIMEOUT 15 /* HPS: Client Connect Timeout */
29 #define MEI_CLIENTS_INIT_TIMEOUT 15 /* HPS: Clients Enumeration Timeout */
31 #define MEI_IAMTHIF_STALL_TIMER 12 /* HPS */
32 #define MEI_IAMTHIF_READ_TIMER 10 /* HPS */
34 #define MEI_PGI_TIMEOUT 1 /* PG Isolation time response 1 sec */
35 #define MEI_D0I3_TIMEOUT 5 /* D0i3 set/unset max response time */
36 #define MEI_HBM_TIMEOUT 1 /* 1 second */
39 * MEI Version
41 #define HBM_MINOR_VERSION 0
42 #define HBM_MAJOR_VERSION 2
45 * MEI version with PGI support
47 #define HBM_MINOR_VERSION_PGI 1
48 #define HBM_MAJOR_VERSION_PGI 1
51 * MEI version with Dynamic clients support
53 #define HBM_MINOR_VERSION_DC 0
54 #define HBM_MAJOR_VERSION_DC 2
57 * MEI version with disconnect on connection timeout support
59 #define HBM_MINOR_VERSION_DOT 0
60 #define HBM_MAJOR_VERSION_DOT 2
63 * MEI version with notifcation support
65 #define HBM_MINOR_VERSION_EV 0
66 #define HBM_MAJOR_VERSION_EV 2
68 /* Host bus message command opcode */
69 #define MEI_HBM_CMD_OP_MSK 0x7f
70 /* Host bus message command RESPONSE */
71 #define MEI_HBM_CMD_RES_MSK 0x80
74 * MEI Bus Message Command IDs
76 #define HOST_START_REQ_CMD 0x01
77 #define HOST_START_RES_CMD 0x81
79 #define HOST_STOP_REQ_CMD 0x02
80 #define HOST_STOP_RES_CMD 0x82
82 #define ME_STOP_REQ_CMD 0x03
84 #define HOST_ENUM_REQ_CMD 0x04
85 #define HOST_ENUM_RES_CMD 0x84
87 #define HOST_CLIENT_PROPERTIES_REQ_CMD 0x05
88 #define HOST_CLIENT_PROPERTIES_RES_CMD 0x85
90 #define CLIENT_CONNECT_REQ_CMD 0x06
91 #define CLIENT_CONNECT_RES_CMD 0x86
93 #define CLIENT_DISCONNECT_REQ_CMD 0x07
94 #define CLIENT_DISCONNECT_RES_CMD 0x87
96 #define MEI_FLOW_CONTROL_CMD 0x08
98 #define MEI_PG_ISOLATION_ENTRY_REQ_CMD 0x0a
99 #define MEI_PG_ISOLATION_ENTRY_RES_CMD 0x8a
100 #define MEI_PG_ISOLATION_EXIT_REQ_CMD 0x0b
101 #define MEI_PG_ISOLATION_EXIT_RES_CMD 0x8b
103 #define MEI_HBM_ADD_CLIENT_REQ_CMD 0x0f
104 #define MEI_HBM_ADD_CLIENT_RES_CMD 0x8f
106 #define MEI_HBM_NOTIFY_REQ_CMD 0x10
107 #define MEI_HBM_NOTIFY_RES_CMD 0x90
108 #define MEI_HBM_NOTIFICATION_CMD 0x11
111 * MEI Stop Reason
112 * used by hbm_host_stop_request.reason
114 enum mei_stop_reason_types {
115 DRIVER_STOP_REQUEST = 0x00,
116 DEVICE_D1_ENTRY = 0x01,
117 DEVICE_D2_ENTRY = 0x02,
118 DEVICE_D3_ENTRY = 0x03,
119 SYSTEM_S1_ENTRY = 0x04,
120 SYSTEM_S2_ENTRY = 0x05,
121 SYSTEM_S3_ENTRY = 0x06,
122 SYSTEM_S4_ENTRY = 0x07,
123 SYSTEM_S5_ENTRY = 0x08
128 * enum mei_hbm_status - mei host bus messages return values
130 * @MEI_HBMS_SUCCESS : status success
131 * @MEI_HBMS_CLIENT_NOT_FOUND : client not found
132 * @MEI_HBMS_ALREADY_EXISTS : connection already established
133 * @MEI_HBMS_REJECTED : connection is rejected
134 * @MEI_HBMS_INVALID_PARAMETER : invalid parameter
135 * @MEI_HBMS_NOT_ALLOWED : operation not allowed
136 * @MEI_HBMS_ALREADY_STARTED : system is already started
137 * @MEI_HBMS_NOT_STARTED : system not started
139 * @MEI_HBMS_MAX : sentinel
141 enum mei_hbm_status {
142 MEI_HBMS_SUCCESS = 0,
143 MEI_HBMS_CLIENT_NOT_FOUND = 1,
144 MEI_HBMS_ALREADY_EXISTS = 2,
145 MEI_HBMS_REJECTED = 3,
146 MEI_HBMS_INVALID_PARAMETER = 4,
147 MEI_HBMS_NOT_ALLOWED = 5,
148 MEI_HBMS_ALREADY_STARTED = 6,
149 MEI_HBMS_NOT_STARTED = 7,
151 MEI_HBMS_MAX
156 * Client Connect Status
157 * used by hbm_client_connect_response.status
159 enum mei_cl_connect_status {
160 MEI_CL_CONN_SUCCESS = MEI_HBMS_SUCCESS,
161 MEI_CL_CONN_NOT_FOUND = MEI_HBMS_CLIENT_NOT_FOUND,
162 MEI_CL_CONN_ALREADY_STARTED = MEI_HBMS_ALREADY_EXISTS,
163 MEI_CL_CONN_OUT_OF_RESOURCES = MEI_HBMS_REJECTED,
164 MEI_CL_CONN_MESSAGE_SMALL = MEI_HBMS_INVALID_PARAMETER,
165 MEI_CL_CONN_NOT_ALLOWED = MEI_HBMS_NOT_ALLOWED,
169 * Client Disconnect Status
171 enum mei_cl_disconnect_status {
172 MEI_CL_DISCONN_SUCCESS = MEI_HBMS_SUCCESS
176 * MEI BUS Interface Section
178 struct mei_msg_hdr {
179 u32 me_addr:8;
180 u32 host_addr:8;
181 u32 length:9;
182 u32 reserved:5;
183 u32 internal:1;
184 u32 msg_complete:1;
185 } __packed;
188 struct mei_bus_message {
189 u8 hbm_cmd;
190 u8 data[0];
191 } __packed;
194 * struct hbm_cl_cmd - client specific host bus command
195 * CONNECT, DISCONNECT, and FlOW CONTROL
197 * @hbm_cmd: bus message command header
198 * @me_addr: address of the client in ME
199 * @host_addr: address of the client in the driver
200 * @data: generic data
202 struct mei_hbm_cl_cmd {
203 u8 hbm_cmd;
204 u8 me_addr;
205 u8 host_addr;
206 u8 data;
209 struct hbm_version {
210 u8 minor_version;
211 u8 major_version;
212 } __packed;
214 struct hbm_host_version_request {
215 u8 hbm_cmd;
216 u8 reserved;
217 struct hbm_version host_version;
218 } __packed;
220 struct hbm_host_version_response {
221 u8 hbm_cmd;
222 u8 host_version_supported;
223 struct hbm_version me_max_version;
224 } __packed;
226 struct hbm_host_stop_request {
227 u8 hbm_cmd;
228 u8 reason;
229 u8 reserved[2];
230 } __packed;
232 struct hbm_host_stop_response {
233 u8 hbm_cmd;
234 u8 reserved[3];
235 } __packed;
237 struct hbm_me_stop_request {
238 u8 hbm_cmd;
239 u8 reason;
240 u8 reserved[2];
241 } __packed;
244 * struct hbm_host_enum_request - enumeration request from host to fw
246 * @hbm_cmd: bus message command header
247 * @allow_add: allow dynamic clients add HBM version >= 2.0
248 * @reserved: reserved
250 struct hbm_host_enum_request {
251 u8 hbm_cmd;
252 u8 allow_add;
253 u8 reserved[2];
254 } __packed;
256 struct hbm_host_enum_response {
257 u8 hbm_cmd;
258 u8 reserved[3];
259 u8 valid_addresses[32];
260 } __packed;
262 struct mei_client_properties {
263 uuid_le protocol_name;
264 u8 protocol_version;
265 u8 max_number_of_connections;
266 u8 fixed_address;
267 u8 single_recv_buf;
268 u32 max_msg_length;
269 } __packed;
271 struct hbm_props_request {
272 u8 hbm_cmd;
273 u8 me_addr;
274 u8 reserved[2];
275 } __packed;
277 struct hbm_props_response {
278 u8 hbm_cmd;
279 u8 me_addr;
280 u8 status;
281 u8 reserved[1];
282 struct mei_client_properties client_properties;
283 } __packed;
286 * struct hbm_add_client_request - request to add a client
287 * might be sent by fw after enumeration has already completed
289 * @hbm_cmd: bus message command header
290 * @me_addr: address of the client in ME
291 * @reserved: reserved
292 * @client_properties: client properties
294 struct hbm_add_client_request {
295 u8 hbm_cmd;
296 u8 me_addr;
297 u8 reserved[2];
298 struct mei_client_properties client_properties;
299 } __packed;
302 * struct hbm_add_client_response - response to add a client
303 * sent by the host to report client addition status to fw
305 * @hbm_cmd: bus message command header
306 * @me_addr: address of the client in ME
307 * @status: if HBMS_SUCCESS then the client can now accept connections.
308 * @reserved: reserved
310 struct hbm_add_client_response {
311 u8 hbm_cmd;
312 u8 me_addr;
313 u8 status;
314 u8 reserved[1];
315 } __packed;
318 * struct hbm_power_gate - power gate request/response
320 * @hbm_cmd: bus message command header
321 * @reserved: reserved
323 struct hbm_power_gate {
324 u8 hbm_cmd;
325 u8 reserved[3];
326 } __packed;
329 * struct hbm_client_connect_request - connect/disconnect request
331 * @hbm_cmd: bus message command header
332 * @me_addr: address of the client in ME
333 * @host_addr: address of the client in the driver
334 * @reserved: reserved
336 struct hbm_client_connect_request {
337 u8 hbm_cmd;
338 u8 me_addr;
339 u8 host_addr;
340 u8 reserved;
341 } __packed;
344 * struct hbm_client_connect_response - connect/disconnect response
346 * @hbm_cmd: bus message command header
347 * @me_addr: address of the client in ME
348 * @host_addr: address of the client in the driver
349 * @status: status of the request
351 struct hbm_client_connect_response {
352 u8 hbm_cmd;
353 u8 me_addr;
354 u8 host_addr;
355 u8 status;
356 } __packed;
359 #define MEI_FC_MESSAGE_RESERVED_LENGTH 5
361 struct hbm_flow_control {
362 u8 hbm_cmd;
363 u8 me_addr;
364 u8 host_addr;
365 u8 reserved[MEI_FC_MESSAGE_RESERVED_LENGTH];
366 } __packed;
368 #define MEI_HBM_NOTIFICATION_START 1
369 #define MEI_HBM_NOTIFICATION_STOP 0
371 * struct hbm_notification_request - start/stop notification request
373 * @hbm_cmd: bus message command header
374 * @me_addr: address of the client in ME
375 * @host_addr: address of the client in the driver
376 * @start: start = 1 or stop = 0 asynchronous notifications
378 struct hbm_notification_request {
379 u8 hbm_cmd;
380 u8 me_addr;
381 u8 host_addr;
382 u8 start;
383 } __packed;
386 * struct hbm_notification_response - start/stop notification response
388 * @hbm_cmd: bus message command header
389 * @me_addr: address of the client in ME
390 * @host_addr: - address of the client in the driver
391 * @status: (mei_hbm_status) response status for the request
392 * - MEI_HBMS_SUCCESS: successful stop/start
393 * - MEI_HBMS_CLIENT_NOT_FOUND: if the connection could not be found.
394 * - MEI_HBMS_ALREADY_STARTED: for start requests for a previously
395 * started notification.
396 * - MEI_HBMS_NOT_STARTED: for stop request for a connected client for whom
397 * asynchronous notifications are currently disabled.
399 * @start: start = 1 or stop = 0 asynchronous notifications
400 * @reserved: reserved
402 struct hbm_notification_response {
403 u8 hbm_cmd;
404 u8 me_addr;
405 u8 host_addr;
406 u8 status;
407 u8 start;
408 u8 reserved[3];
409 } __packed;
412 * struct hbm_notification - notification event
414 * @hbm_cmd: bus message command header
415 * @me_addr: address of the client in ME
416 * @host_addr: address of the client in the driver
417 * @reserved: reserved for alignment
419 struct hbm_notification {
420 u8 hbm_cmd;
421 u8 me_addr;
422 u8 host_addr;
423 u8 reserved[1];
424 } __packed;
426 #endif