of: MSI: Simplify irqdomain lookup
[linux/fpc-iii.git] / drivers / nvmem / mxs-ocotp.c
blob8ba19bba31569f22c6529a739fa1d30adf5c2f0f
1 /*
2 * Freescale MXS On-Chip OTP driver
4 * Copyright (C) 2015 Stefan Wahren <stefan.wahren@i2se.com>
6 * Based on the driver from Huang Shijie and Christoph G. Baumann
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
19 #include <linux/clk.h>
20 #include <linux/delay.h>
21 #include <linux/device.h>
22 #include <linux/err.h>
23 #include <linux/io.h>
24 #include <linux/module.h>
25 #include <linux/nvmem-provider.h>
26 #include <linux/of_device.h>
27 #include <linux/platform_device.h>
28 #include <linux/regmap.h>
29 #include <linux/slab.h>
30 #include <linux/stmp_device.h>
32 /* OCOTP registers and bits */
34 #define BM_OCOTP_CTRL_RD_BANK_OPEN BIT(12)
35 #define BM_OCOTP_CTRL_ERROR BIT(9)
36 #define BM_OCOTP_CTRL_BUSY BIT(8)
38 #define OCOTP_TIMEOUT 10000
39 #define OCOTP_DATA_OFFSET 0x20
41 struct mxs_ocotp {
42 struct clk *clk;
43 void __iomem *base;
44 struct nvmem_device *nvmem;
47 static int mxs_ocotp_wait(struct mxs_ocotp *otp)
49 int timeout = OCOTP_TIMEOUT;
50 unsigned int status = 0;
52 while (timeout--) {
53 status = readl(otp->base);
55 if (!(status & (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)))
56 break;
58 cpu_relax();
61 if (status & BM_OCOTP_CTRL_BUSY)
62 return -EBUSY;
63 else if (status & BM_OCOTP_CTRL_ERROR)
64 return -EIO;
66 return 0;
69 static int mxs_ocotp_read(void *context, const void *reg, size_t reg_size,
70 void *val, size_t val_size)
72 struct mxs_ocotp *otp = context;
73 unsigned int offset = *(u32 *)reg;
74 u32 *buf = val;
75 int ret;
77 ret = clk_enable(otp->clk);
78 if (ret)
79 return ret;
81 writel(BM_OCOTP_CTRL_ERROR, otp->base + STMP_OFFSET_REG_CLR);
83 ret = mxs_ocotp_wait(otp);
84 if (ret)
85 goto disable_clk;
87 /* open OCOTP banks for read */
88 writel(BM_OCOTP_CTRL_RD_BANK_OPEN, otp->base + STMP_OFFSET_REG_SET);
90 /* approximately wait 33 hclk cycles */
91 udelay(1);
93 ret = mxs_ocotp_wait(otp);
94 if (ret)
95 goto close_banks;
97 while (val_size) {
98 if ((offset < OCOTP_DATA_OFFSET) || (offset % 16)) {
99 /* fill up non-data register */
100 *buf = 0;
101 } else {
102 *buf = readl(otp->base + offset);
105 buf++;
106 val_size--;
107 offset += reg_size;
110 close_banks:
111 /* close banks for power saving */
112 writel(BM_OCOTP_CTRL_RD_BANK_OPEN, otp->base + STMP_OFFSET_REG_CLR);
114 disable_clk:
115 clk_disable(otp->clk);
117 return ret;
120 static int mxs_ocotp_write(void *context, const void *data, size_t count)
122 /* We don't want to support writing */
123 return 0;
126 static bool mxs_ocotp_writeable_reg(struct device *dev, unsigned int reg)
128 return false;
131 static struct nvmem_config ocotp_config = {
132 .name = "mxs-ocotp",
133 .owner = THIS_MODULE,
136 static const struct regmap_range imx23_ranges[] = {
137 regmap_reg_range(OCOTP_DATA_OFFSET, 0x210),
140 static const struct regmap_access_table imx23_access = {
141 .yes_ranges = imx23_ranges,
142 .n_yes_ranges = ARRAY_SIZE(imx23_ranges),
145 static const struct regmap_range imx28_ranges[] = {
146 regmap_reg_range(OCOTP_DATA_OFFSET, 0x290),
149 static const struct regmap_access_table imx28_access = {
150 .yes_ranges = imx28_ranges,
151 .n_yes_ranges = ARRAY_SIZE(imx28_ranges),
154 static struct regmap_bus mxs_ocotp_bus = {
155 .read = mxs_ocotp_read,
156 .write = mxs_ocotp_write, /* make regmap_init() happy */
157 .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
158 .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
161 static struct regmap_config mxs_ocotp_config = {
162 .reg_bits = 32,
163 .val_bits = 32,
164 .reg_stride = 16,
165 .writeable_reg = mxs_ocotp_writeable_reg,
168 static const struct of_device_id mxs_ocotp_match[] = {
169 { .compatible = "fsl,imx23-ocotp", .data = &imx23_access },
170 { .compatible = "fsl,imx28-ocotp", .data = &imx28_access },
171 { /* sentinel */},
173 MODULE_DEVICE_TABLE(of, mxs_ocotp_match);
175 static int mxs_ocotp_probe(struct platform_device *pdev)
177 struct device *dev = &pdev->dev;
178 struct mxs_ocotp *otp;
179 struct resource *res;
180 const struct of_device_id *match;
181 struct regmap *regmap;
182 const struct regmap_access_table *access;
183 int ret;
185 match = of_match_device(dev->driver->of_match_table, dev);
186 if (!match || !match->data)
187 return -EINVAL;
189 otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL);
190 if (!otp)
191 return -ENOMEM;
193 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
194 otp->base = devm_ioremap_resource(dev, res);
195 if (IS_ERR(otp->base))
196 return PTR_ERR(otp->base);
198 otp->clk = devm_clk_get(&pdev->dev, NULL);
199 if (IS_ERR(otp->clk))
200 return PTR_ERR(otp->clk);
202 ret = clk_prepare(otp->clk);
203 if (ret < 0) {
204 dev_err(dev, "failed to prepare clk: %d\n", ret);
205 return ret;
208 access = match->data;
209 mxs_ocotp_config.rd_table = access;
210 mxs_ocotp_config.max_register = access->yes_ranges[0].range_max;
212 regmap = devm_regmap_init(dev, &mxs_ocotp_bus, otp, &mxs_ocotp_config);
213 if (IS_ERR(regmap)) {
214 dev_err(dev, "regmap init failed\n");
215 ret = PTR_ERR(regmap);
216 goto err_clk;
219 ocotp_config.dev = dev;
220 otp->nvmem = nvmem_register(&ocotp_config);
221 if (IS_ERR(otp->nvmem)) {
222 ret = PTR_ERR(otp->nvmem);
223 goto err_clk;
226 platform_set_drvdata(pdev, otp);
228 return 0;
230 err_clk:
231 clk_unprepare(otp->clk);
233 return ret;
236 static int mxs_ocotp_remove(struct platform_device *pdev)
238 struct mxs_ocotp *otp = platform_get_drvdata(pdev);
240 clk_unprepare(otp->clk);
242 return nvmem_unregister(otp->nvmem);
245 static struct platform_driver mxs_ocotp_driver = {
246 .probe = mxs_ocotp_probe,
247 .remove = mxs_ocotp_remove,
248 .driver = {
249 .name = "mxs-ocotp",
250 .of_match_table = mxs_ocotp_match,
254 module_platform_driver(mxs_ocotp_driver);
255 MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>");
256 MODULE_DESCRIPTION("driver for OCOTP in i.MX23/i.MX28");
257 MODULE_LICENSE("GPL v2");