drivers/phy/phy-berlin-sata.c

   1 /*
   2  * Marvell Berlin SATA PHY driver
   3  *
   4  * Copyright (C) 2014 Marvell Technology Group Ltd.
   5  *
   6  * Antoine Ténart <antoine.tenart@free-electrons.com>
   7  *
   8  * This file is licensed under the terms of the GNU General Public
   9  * License version 2. This program is licensed "as is" without any
  10  * warranty of any kind, whether express or implied.
  11  */
  12
  13 #include <linux/clk.h>
  14 #include <linux/module.h>
  15 #include <linux/phy/phy.h>
  16 #include <linux/io.h>
  17 #include <linux/platform_device.h>
  18
  19 #define HOST_VSA_ADDR           0x0
  20 #define HOST_VSA_DATA           0x4
  21 #define PORT_SCR_CTL            0x2c
  22 #define PORT_VSR_ADDR           0x78
  23 #define PORT_VSR_DATA           0x7c
  24
  25 #define CONTROL_REGISTER        0x0
  26 #define MBUS_SIZE_CONTROL       0x4
  27
  28 #define POWER_DOWN_PHY0                 BIT(6)
  29 #define POWER_DOWN_PHY1                 BIT(14)
  30 #define MBUS_WRITE_REQUEST_SIZE_128     (BIT(2) << 16)
  31 #define MBUS_READ_REQUEST_SIZE_128      (BIT(2) << 19)
  32
  33 #define BG2_PHY_BASE            0x080
  34 #define BG2Q_PHY_BASE           0x200
  35
  36 /* register 0x01 */
  37 #define REF_FREF_SEL_25         BIT(0)
  38 #define PHY_MODE_SATA           (0x0 << 5)
  39
  40 /* register 0x02 */
  41 #define USE_MAX_PLL_RATE        BIT(12)
  42
  43 /* register 0x23 */
  44 #define DATA_BIT_WIDTH_10       (0x0 << 10)
  45 #define DATA_BIT_WIDTH_20       (0x1 << 10)
  46 #define DATA_BIT_WIDTH_40       (0x2 << 10)
  47
  48 /* register 0x25 */
  49 #define PHY_GEN_MAX_1_5         (0x0 << 10)
  50 #define PHY_GEN_MAX_3_0         (0x1 << 10)
  51 #define PHY_GEN_MAX_6_0         (0x2 << 10)
  52
  53 struct phy_berlin_desc {
  54         struct phy      *phy;
  55         u32             power_bit;
  56         unsigned        index;
  57 };
  58
  59 struct phy_berlin_priv {
  60         void __iomem            *base;
  61         spinlock_t              lock;
  62         struct clk              *clk;
  63         struct phy_berlin_desc  **phys;
  64         unsigned                nphys;
  65         u32                     phy_base;
  66 };
  67
  68 static inline void phy_berlin_sata_reg_setbits(void __iomem *ctrl_reg,
  69                                u32 phy_base, u32 reg, u32 mask, u32 val)
  70 {
  71         u32 regval;
  72
  73         /* select register */
  74         writel(phy_base + reg, ctrl_reg + PORT_VSR_ADDR);
  75
  76         /* set bits */
  77         regval = readl(ctrl_reg + PORT_VSR_DATA);
  78         regval &= ~mask;
  79         regval |= val;
  80         writel(regval, ctrl_reg + PORT_VSR_DATA);
  81 }
  82
  83 static int phy_berlin_sata_power_on(struct phy *phy)
  84 {
  85         struct phy_berlin_desc *desc = phy_get_drvdata(phy);
  86         struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent);
  87         void __iomem *ctrl_reg = priv->base + 0x60 + (desc->index * 0x80);
  88         int ret = 0;
  89         u32 regval;
  90
  91         clk_prepare_enable(priv->clk);
  92
  93         spin_lock(&priv->lock);
  94
  95         /* Power on PHY */
  96         writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR);
  97         regval = readl(priv->base + HOST_VSA_DATA);
  98         regval &= ~desc->power_bit;
  99         writel(regval, priv->base + HOST_VSA_DATA);
 100
 101         /* Configure MBus */
 102         writel(MBUS_SIZE_CONTROL, priv->base + HOST_VSA_ADDR);
 103         regval = readl(priv->base + HOST_VSA_DATA);
 104         regval |= MBUS_WRITE_REQUEST_SIZE_128 | MBUS_READ_REQUEST_SIZE_128;
 105         writel(regval, priv->base + HOST_VSA_DATA);
 106
 107         /* set PHY mode and ref freq to 25 MHz */
 108         phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x01,
 109                                     0x00ff, REF_FREF_SEL_25 | PHY_MODE_SATA);
 110
 111         /* set PHY up to 6 Gbps */
 112         phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x25,
 113                                     0x0c00, PHY_GEN_MAX_6_0);
 114
 115         /* set 40 bits width */
 116         phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x23,
 117                                     0x0c00, DATA_BIT_WIDTH_40);
 118
 119         /* use max pll rate */
 120         phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x02,
 121                                     0x0000, USE_MAX_PLL_RATE);
 122
 123         /* set Gen3 controller speed */
 124         regval = readl(ctrl_reg + PORT_SCR_CTL);
 125         regval &= ~GENMASK(7, 4);
 126         regval |= 0x30;
 127         writel(regval, ctrl_reg + PORT_SCR_CTL);
 128
 129         spin_unlock(&priv->lock);
 130
 131         clk_disable_unprepare(priv->clk);
 132
 133         return ret;
 134 }
 135
 136 static int phy_berlin_sata_power_off(struct phy *phy)
 137 {
 138         struct phy_berlin_desc *desc = phy_get_drvdata(phy);
 139         struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent);
 140         u32 regval;
 141
 142         clk_prepare_enable(priv->clk);
 143
 144         spin_lock(&priv->lock);
 145
 146         /* Power down PHY */
 147         writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR);
 148         regval = readl(priv->base + HOST_VSA_DATA);
 149         regval |= desc->power_bit;
 150         writel(regval, priv->base + HOST_VSA_DATA);
 151
 152         spin_unlock(&priv->lock);
 153
 154         clk_disable_unprepare(priv->clk);
 155
 156         return 0;
 157 }
 158
 159 static struct phy *phy_berlin_sata_phy_xlate(struct device *dev,
 160                                              struct of_phandle_args *args)
 161 {
 162         struct phy_berlin_priv *priv = dev_get_drvdata(dev);
 163         int i;
 164
 165         if (WARN_ON(args->args[0] >= priv->nphys))
 166                 return ERR_PTR(-ENODEV);
 167
 168         for (i = 0; i < priv->nphys; i++) {
 169                 if (priv->phys[i]->index == args->args[0])
 170                         break;
 171         }
 172
 173         if (i == priv->nphys)
 174                 return ERR_PTR(-ENODEV);
 175
 176         return priv->phys[i]->phy;
 177 }
 178
 179 static const struct phy_ops phy_berlin_sata_ops = {
 180         .power_on       = phy_berlin_sata_power_on,
 181         .power_off      = phy_berlin_sata_power_off,
 182         .owner          = THIS_MODULE,
 183 };
 184
 185 static u32 phy_berlin_power_down_bits[] = {
 186         POWER_DOWN_PHY0,
 187         POWER_DOWN_PHY1,
 188 };
 189
 190 static int phy_berlin_sata_probe(struct platform_device *pdev)
 191 {
 192         struct device *dev = &pdev->dev;
 193         struct device_node *child;
 194         struct phy *phy;
 195         struct phy_provider *phy_provider;
 196         struct phy_berlin_priv *priv;
 197         struct resource *res;
 198         int ret, i = 0;
 199         u32 phy_id;
 200
 201         priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 202         if (!priv)
 203                 return -ENOMEM;
 204
 205         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 206         if (!res)
 207                 return -EINVAL;
 208
 209         priv->base = devm_ioremap(dev, res->start, resource_size(res));
 210         if (!priv->base)
 211                 return -ENOMEM;
 212
 213         priv->clk = devm_clk_get(dev, NULL);
 214         if (IS_ERR(priv->clk))
 215                 return PTR_ERR(priv->clk);
 216
 217         priv->nphys = of_get_child_count(dev->of_node);
 218         if (priv->nphys == 0)
 219                 return -ENODEV;
 220
 221         priv->phys = devm_kcalloc(dev, priv->nphys, sizeof(*priv->phys),
 222                                   GFP_KERNEL);
 223         if (!priv->phys)
 224                 return -ENOMEM;
 225
 226         if (of_device_is_compatible(dev->of_node, "marvell,berlin2-sata-phy"))
 227                 priv->phy_base = BG2_PHY_BASE;
 228         else
 229                 priv->phy_base = BG2Q_PHY_BASE;
 230
 231         dev_set_drvdata(dev, priv);
 232         spin_lock_init(&priv->lock);
 233
 234         for_each_available_child_of_node(dev->of_node, child) {
 235                 struct phy_berlin_desc *phy_desc;
 236
 237                 if (of_property_read_u32(child, "reg", &phy_id)) {
 238                         dev_err(dev, "missing reg property in node %s\n",
 239                                 child->name);
 240                         ret = -EINVAL;
 241                         goto put_child;
 242                 }
 243
 244                 if (phy_id >= ARRAY_SIZE(phy_berlin_power_down_bits)) {
 245                         dev_err(dev, "invalid reg in node %s\n", child->name);
 246                         ret = -EINVAL;
 247                         goto put_child;
 248                 }
 249
 250                 phy_desc = devm_kzalloc(dev, sizeof(*phy_desc), GFP_KERNEL);
 251                 if (!phy_desc) {
 252                         ret = -ENOMEM;
 253                         goto put_child;
 254                 }
 255
 256                 phy = devm_phy_create(dev, NULL, &phy_berlin_sata_ops);
 257                 if (IS_ERR(phy)) {
 258                         dev_err(dev, "failed to create PHY %d\n", phy_id);
 259                         ret = PTR_ERR(phy);
 260                         goto put_child;
 261                 }
 262
 263                 phy_desc->phy = phy;
 264                 phy_desc->power_bit = phy_berlin_power_down_bits[phy_id];
 265                 phy_desc->index = phy_id;
 266                 phy_set_drvdata(phy, phy_desc);
 267
 268                 priv->phys[i++] = phy_desc;
 269
 270                 /* Make sure the PHY is off */
 271                 phy_berlin_sata_power_off(phy);
 272         }
 273
 274         phy_provider =
 275                 devm_of_phy_provider_register(dev, phy_berlin_sata_phy_xlate);
 276         return PTR_ERR_OR_ZERO(phy_provider);
 277 put_child:
 278         of_node_put(child);
 279         return ret;
 280 }
 281
 282 static const struct of_device_id phy_berlin_sata_of_match[] = {
 283         { .compatible = "marvell,berlin2-sata-phy" },
 284         { .compatible = "marvell,berlin2q-sata-phy" },
 285         { },
 286 };
 287 MODULE_DEVICE_TABLE(of, phy_berlin_sata_of_match);
 288
 289 static struct platform_driver phy_berlin_sata_driver = {
 290         .probe  = phy_berlin_sata_probe,
 291         .driver = {
 292                 .name           = "phy-berlin-sata",
 293                 .of_match_table = phy_berlin_sata_of_match,
 294         },
 295 };
 296 module_platform_driver(phy_berlin_sata_driver);
 297
 298 MODULE_DESCRIPTION("Marvell Berlin SATA PHY driver");
 299 MODULE_AUTHOR("Antoine Ténart <antoine.tenart@free-electrons.com>");
 300 MODULE_LICENSE("GPL v2");