drivers/regulator/lp3972.c

   1 /*
   2  * Regulator driver for National Semiconductors LP3972 PMIC chip
   3  *
   4  * Based on lp3971.c
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  *
  10  */
  11
  12 #include <linux/bug.h>
  13 #include <linux/err.h>
  14 #include <linux/i2c.h>
  15 #include <linux/module.h>
  16 #include <linux/kernel.h>
  17 #include <linux/regulator/driver.h>
  18 #include <linux/regulator/lp3972.h>
  19 #include <linux/slab.h>
  20
  21 struct lp3972 {
  22         struct device *dev;
  23         struct mutex io_lock;
  24         struct i2c_client *i2c;
  25 };
  26
  27 /* LP3972 Control Registers */
  28 #define LP3972_SCR_REG          0x07
  29 #define LP3972_OVER1_REG        0x10
  30 #define LP3972_OVSR1_REG        0x11
  31 #define LP3972_OVER2_REG        0x12
  32 #define LP3972_OVSR2_REG        0x13
  33 #define LP3972_VCC1_REG         0x20
  34 #define LP3972_ADTV1_REG        0x23
  35 #define LP3972_ADTV2_REG        0x24
  36 #define LP3972_AVRC_REG         0x25
  37 #define LP3972_CDTC1_REG        0x26
  38 #define LP3972_CDTC2_REG        0x27
  39 #define LP3972_SDTV1_REG        0x29
  40 #define LP3972_SDTV2_REG        0x2A
  41 #define LP3972_MDTV1_REG        0x32
  42 #define LP3972_MDTV2_REG        0x33
  43 #define LP3972_L2VCR_REG        0x39
  44 #define LP3972_L34VCR_REG       0x3A
  45 #define LP3972_SCR1_REG         0x80
  46 #define LP3972_SCR2_REG         0x81
  47 #define LP3972_OEN3_REG         0x82
  48 #define LP3972_OSR3_REG         0x83
  49 #define LP3972_LOER4_REG        0x84
  50 #define LP3972_B2TV_REG         0x85
  51 #define LP3972_B3TV_REG         0x86
  52 #define LP3972_B32RC_REG        0x87
  53 #define LP3972_ISRA_REG         0x88
  54 #define LP3972_BCCR_REG         0x89
  55 #define LP3972_II1RR_REG        0x8E
  56 #define LP3972_II2RR_REG        0x8F
  57
  58 #define LP3972_SYS_CONTROL1_REG         LP3972_SCR1_REG
  59 /* System control register 1 initial value,
  60  * bits 5, 6 and 7 are EPROM programmable */
  61 #define SYS_CONTROL1_INIT_VAL           0x02
  62 #define SYS_CONTROL1_INIT_MASK          0x1F
  63
  64 #define LP3972_VOL_CHANGE_REG           LP3972_VCC1_REG
  65 #define LP3972_VOL_CHANGE_FLAG_GO       0x01
  66 #define LP3972_VOL_CHANGE_FLAG_MASK     0x03
  67
  68 /* LDO output enable mask */
  69 #define LP3972_OEN3_L1EN        BIT(0)
  70 #define LP3972_OVER2_LDO2_EN    BIT(2)
  71 #define LP3972_OVER2_LDO3_EN    BIT(3)
  72 #define LP3972_OVER2_LDO4_EN    BIT(4)
  73 #define LP3972_OVER1_S_EN       BIT(2)
  74
  75 static const unsigned int ldo1_voltage_map[] = {
  76         1700000, 1725000, 1750000, 1775000, 1800000, 1825000, 1850000, 1875000,
  77         1900000, 1925000, 1950000, 1975000, 2000000,
  78 };
  79
  80 static const unsigned int ldo23_voltage_map[] = {
  81         1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
  82         2600000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000,
  83 };
  84
  85 static const unsigned int ldo4_voltage_map[] = {
  86         1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1350000,
  87         1400000, 1500000, 1800000, 1900000, 2500000, 2800000, 3000000, 3300000,
  88 };
  89
  90 static const unsigned int ldo5_voltage_map[] = {
  91               0,       0,       0,       0,       0,  850000,  875000,  900000,
  92          925000,  950000,  975000, 1000000, 1025000, 1050000, 1075000, 1100000,
  93         1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000,
  94         1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000,
  95 };
  96
  97 static const unsigned int buck1_voltage_map[] = {
  98          725000,  750000,  775000,  800000,  825000,  850000,  875000,  900000,
  99          925000,  950000,  975000, 1000000, 1025000, 1050000, 1075000, 1100000,
 100         1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000,
 101         1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000,
 102 };
 103
 104 static const unsigned int buck23_voltage_map[] = {
 105               0,  800000,  850000,  900000,  950000, 1000000, 1050000, 1100000,
 106         1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000,
 107         1550000, 1600000, 1650000, 1700000, 1800000, 1900000, 2500000, 2800000,
 108         3000000, 3300000,
 109 };
 110
 111 static const int ldo_output_enable_mask[] = {
 112         LP3972_OEN3_L1EN,
 113         LP3972_OVER2_LDO2_EN,
 114         LP3972_OVER2_LDO3_EN,
 115         LP3972_OVER2_LDO4_EN,
 116         LP3972_OVER1_S_EN,
 117 };
 118
 119 static const int ldo_output_enable_addr[] = {
 120         LP3972_OEN3_REG,
 121         LP3972_OVER2_REG,
 122         LP3972_OVER2_REG,
 123         LP3972_OVER2_REG,
 124         LP3972_OVER1_REG,
 125 };
 126
 127 static const int ldo_vol_ctl_addr[] = {
 128         LP3972_MDTV1_REG,
 129         LP3972_L2VCR_REG,
 130         LP3972_L34VCR_REG,
 131         LP3972_L34VCR_REG,
 132         LP3972_SDTV1_REG,
 133 };
 134
 135 static const int buck_vol_enable_addr[] = {
 136         LP3972_OVER1_REG,
 137         LP3972_OEN3_REG,
 138         LP3972_OEN3_REG,
 139 };
 140
 141 static const int buck_base_addr[] = {
 142         LP3972_ADTV1_REG,
 143         LP3972_B2TV_REG,
 144         LP3972_B3TV_REG,
 145 };
 146
 147 #define LP3972_LDO_OUTPUT_ENABLE_MASK(x) (ldo_output_enable_mask[x])
 148 #define LP3972_LDO_OUTPUT_ENABLE_REG(x) (ldo_output_enable_addr[x])
 149
 150 /*      LDO voltage control registers shift:
 151         LP3972_LDO1 -> 0, LP3972_LDO2 -> 4
 152         LP3972_LDO3 -> 0, LP3972_LDO4 -> 4
 153         LP3972_LDO5 -> 0
 154 */
 155 #define LP3972_LDO_VOL_CONTR_SHIFT(x) (((x) & 1) << 2)
 156 #define LP3972_LDO_VOL_CONTR_REG(x) (ldo_vol_ctl_addr[x])
 157 #define LP3972_LDO_VOL_CHANGE_SHIFT(x) ((x) ? 4 : 6)
 158
 159 #define LP3972_LDO_VOL_MASK(x) (((x) % 4) ? 0x0f : 0x1f)
 160 #define LP3972_LDO_VOL_MIN_IDX(x) (((x) == 4) ? 0x05 : 0x00)
 161 #define LP3972_LDO_VOL_MAX_IDX(x) ((x) ? (((x) == 4) ? 0x1f : 0x0f) : 0x0c)
 162
 163 #define LP3972_BUCK_VOL_ENABLE_REG(x) (buck_vol_enable_addr[x])
 164 #define LP3972_BUCK_VOL1_REG(x) (buck_base_addr[x])
 165 #define LP3972_BUCK_VOL_MASK 0x1f
 166
 167 static int lp3972_i2c_read(struct i2c_client *i2c, char reg, int count,
 168         u16 *dest)
 169 {
 170         int ret;
 171
 172         if (count != 1)
 173                 return -EIO;
 174         ret = i2c_smbus_read_byte_data(i2c, reg);
 175         if (ret < 0)
 176                 return ret;
 177
 178         *dest = ret;
 179         return 0;
 180 }
 181
 182 static int lp3972_i2c_write(struct i2c_client *i2c, char reg, int count,
 183         const u16 *src)
 184 {
 185         if (count != 1)
 186                 return -EIO;
 187         return i2c_smbus_write_byte_data(i2c, reg, *src);
 188 }
 189
 190 static u8 lp3972_reg_read(struct lp3972 *lp3972, u8 reg)
 191 {
 192         u16 val = 0;
 193
 194         mutex_lock(&lp3972->io_lock);
 195
 196         lp3972_i2c_read(lp3972->i2c, reg, 1, &val);
 197
 198         dev_dbg(lp3972->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg,
 199                 (unsigned)val & 0xff);
 200
 201         mutex_unlock(&lp3972->io_lock);
 202
 203         return val & 0xff;
 204 }
 205
 206 static int lp3972_set_bits(struct lp3972 *lp3972, u8 reg, u16 mask, u16 val)
 207 {
 208         u16 tmp;
 209         int ret;
 210
 211         mutex_lock(&lp3972->io_lock);
 212
 213         ret = lp3972_i2c_read(lp3972->i2c, reg, 1, &tmp);
 214         tmp = (tmp & ~mask) | val;
 215         if (ret == 0) {
 216                 ret = lp3972_i2c_write(lp3972->i2c, reg, 1, &tmp);
 217                 dev_dbg(lp3972->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg,
 218                         (unsigned)val & 0xff);
 219         }
 220         mutex_unlock(&lp3972->io_lock);
 221
 222         return ret;
 223 }
 224
 225 static int lp3972_ldo_is_enabled(struct regulator_dev *dev)
 226 {
 227         struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 228         int ldo = rdev_get_id(dev) - LP3972_LDO1;
 229         u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo);
 230         u16 val;
 231
 232         val = lp3972_reg_read(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo));
 233         return !!(val & mask);
 234 }
 235
 236 static int lp3972_ldo_enable(struct regulator_dev *dev)
 237 {
 238         struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 239         int ldo = rdev_get_id(dev) - LP3972_LDO1;
 240         u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo);
 241
 242         return lp3972_set_bits(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo),
 243                                 mask, mask);
 244 }
 245
 246 static int lp3972_ldo_disable(struct regulator_dev *dev)
 247 {
 248         struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 249         int ldo = rdev_get_id(dev) - LP3972_LDO1;
 250         u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo);
 251
 252         return lp3972_set_bits(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo),
 253                                 mask, 0);
 254 }
 255
 256 static int lp3972_ldo_get_voltage_sel(struct regulator_dev *dev)
 257 {
 258         struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 259         int ldo = rdev_get_id(dev) - LP3972_LDO1;
 260         u16 mask = LP3972_LDO_VOL_MASK(ldo);
 261         u16 val, reg;
 262
 263         reg = lp3972_reg_read(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo));
 264         val = (reg >> LP3972_LDO_VOL_CONTR_SHIFT(ldo)) & mask;
 265
 266         return val;
 267 }
 268
 269 static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev,
 270                                       unsigned int selector)
 271 {
 272         struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 273         int ldo = rdev_get_id(dev) - LP3972_LDO1;
 274         int shift, ret;
 275
 276         shift = LP3972_LDO_VOL_CONTR_SHIFT(ldo);
 277         ret = lp3972_set_bits(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo),
 278                 LP3972_LDO_VOL_MASK(ldo) << shift, selector << shift);
 279
 280         if (ret)
 281                 return ret;
 282
 283         /*
 284          * LDO1 and LDO5 support voltage control by either target voltage1
 285          * or target voltage2 register.
 286          * We use target voltage1 register for LDO1 and LDO5 in this driver.
 287          * We need to update voltage change control register(0x20) to enable
 288          * LDO1 and LDO5 to change to their programmed target values.
 289          */
 290         switch (ldo) {
 291         case LP3972_LDO1:
 292         case LP3972_LDO5:
 293                 shift = LP3972_LDO_VOL_CHANGE_SHIFT(ldo);
 294                 ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG,
 295                         LP3972_VOL_CHANGE_FLAG_MASK << shift,
 296                         LP3972_VOL_CHANGE_FLAG_GO << shift);
 297                 if (ret)
 298                         return ret;
 299
 300                 ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG,
 301                         LP3972_VOL_CHANGE_FLAG_MASK << shift, 0);
 302                 break;
 303         }
 304
 305         return ret;
 306 }
 307
 308 static struct regulator_ops lp3972_ldo_ops = {
 309         .list_voltage = regulator_list_voltage_table,
 310         .map_voltage = regulator_map_voltage_ascend,
 311         .is_enabled = lp3972_ldo_is_enabled,
 312         .enable = lp3972_ldo_enable,
 313         .disable = lp3972_ldo_disable,
 314         .get_voltage_sel = lp3972_ldo_get_voltage_sel,
 315         .set_voltage_sel = lp3972_ldo_set_voltage_sel,
 316 };
 317
 318 static int lp3972_dcdc_is_enabled(struct regulator_dev *dev)
 319 {
 320         struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 321         int buck = rdev_get_id(dev) - LP3972_DCDC1;
 322         u16 mask = 1 << (buck * 2);
 323         u16 val;
 324
 325         val = lp3972_reg_read(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck));
 326         return !!(val & mask);
 327 }
 328
 329 static int lp3972_dcdc_enable(struct regulator_dev *dev)
 330 {
 331         struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 332         int buck = rdev_get_id(dev) - LP3972_DCDC1;
 333         u16 mask = 1 << (buck * 2);
 334         u16 val;
 335
 336         val = lp3972_set_bits(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck),
 337                                 mask, mask);
 338         return val;
 339 }
 340
 341 static int lp3972_dcdc_disable(struct regulator_dev *dev)
 342 {
 343         struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 344         int buck = rdev_get_id(dev) - LP3972_DCDC1;
 345         u16 mask = 1 << (buck * 2);
 346         u16 val;
 347
 348         val = lp3972_set_bits(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck),
 349                                 mask, 0);
 350         return val;
 351 }
 352
 353 static int lp3972_dcdc_get_voltage_sel(struct regulator_dev *dev)
 354 {
 355         struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 356         int buck = rdev_get_id(dev) - LP3972_DCDC1;
 357         u16 reg;
 358
 359         reg = lp3972_reg_read(lp3972, LP3972_BUCK_VOL1_REG(buck));
 360         reg &= LP3972_BUCK_VOL_MASK;
 361
 362         return reg;
 363 }
 364
 365 static int lp3972_dcdc_set_voltage_sel(struct regulator_dev *dev,
 366                                        unsigned int selector)
 367 {
 368         struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 369         int buck = rdev_get_id(dev) - LP3972_DCDC1;
 370         int ret;
 371
 372         ret = lp3972_set_bits(lp3972, LP3972_BUCK_VOL1_REG(buck),
 373                                 LP3972_BUCK_VOL_MASK, selector);
 374         if (ret)
 375                 return ret;
 376
 377         if (buck != 0)
 378                 return ret;
 379
 380         ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG,
 381                 LP3972_VOL_CHANGE_FLAG_MASK, LP3972_VOL_CHANGE_FLAG_GO);
 382         if (ret)
 383                 return ret;
 384
 385         return lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG,
 386                                 LP3972_VOL_CHANGE_FLAG_MASK, 0);
 387 }
 388
 389 static struct regulator_ops lp3972_dcdc_ops = {
 390         .list_voltage = regulator_list_voltage_table,
 391         .map_voltage = regulator_map_voltage_ascend,
 392         .is_enabled = lp3972_dcdc_is_enabled,
 393         .enable = lp3972_dcdc_enable,
 394         .disable = lp3972_dcdc_disable,
 395         .get_voltage_sel = lp3972_dcdc_get_voltage_sel,
 396         .set_voltage_sel = lp3972_dcdc_set_voltage_sel,
 397 };
 398
 399 static const struct regulator_desc regulators[] = {
 400         {
 401                 .name = "LDO1",
 402                 .id = LP3972_LDO1,
 403                 .ops = &lp3972_ldo_ops,
 404                 .n_voltages = ARRAY_SIZE(ldo1_voltage_map),
 405                 .volt_table = ldo1_voltage_map,
 406                 .type = REGULATOR_VOLTAGE,
 407                 .owner = THIS_MODULE,
 408         },
 409         {
 410                 .name = "LDO2",
 411                 .id = LP3972_LDO2,
 412                 .ops = &lp3972_ldo_ops,
 413                 .n_voltages = ARRAY_SIZE(ldo23_voltage_map),
 414                 .volt_table = ldo23_voltage_map,
 415                 .type = REGULATOR_VOLTAGE,
 416                 .owner = THIS_MODULE,
 417         },
 418         {
 419                 .name = "LDO3",
 420                 .id = LP3972_LDO3,
 421                 .ops = &lp3972_ldo_ops,
 422                 .n_voltages = ARRAY_SIZE(ldo23_voltage_map),
 423                 .volt_table = ldo23_voltage_map,
 424                 .type = REGULATOR_VOLTAGE,
 425                 .owner = THIS_MODULE,
 426         },
 427         {
 428                 .name = "LDO4",
 429                 .id = LP3972_LDO4,
 430                 .ops = &lp3972_ldo_ops,
 431                 .n_voltages = ARRAY_SIZE(ldo4_voltage_map),
 432                 .volt_table = ldo4_voltage_map,
 433                 .type = REGULATOR_VOLTAGE,
 434                 .owner = THIS_MODULE,
 435         },
 436         {
 437                 .name = "LDO5",
 438                 .id = LP3972_LDO5,
 439                 .ops = &lp3972_ldo_ops,
 440                 .n_voltages = ARRAY_SIZE(ldo5_voltage_map),
 441                 .volt_table = ldo5_voltage_map,
 442                 .type = REGULATOR_VOLTAGE,
 443                 .owner = THIS_MODULE,
 444         },
 445         {
 446                 .name = "DCDC1",
 447                 .id = LP3972_DCDC1,
 448                 .ops = &lp3972_dcdc_ops,
 449                 .n_voltages = ARRAY_SIZE(buck1_voltage_map),
 450                 .volt_table = buck1_voltage_map,
 451                 .type = REGULATOR_VOLTAGE,
 452                 .owner = THIS_MODULE,
 453         },
 454         {
 455                 .name = "DCDC2",
 456                 .id = LP3972_DCDC2,
 457                 .ops = &lp3972_dcdc_ops,
 458                 .n_voltages = ARRAY_SIZE(buck23_voltage_map),
 459                 .volt_table = buck23_voltage_map,
 460                 .type = REGULATOR_VOLTAGE,
 461                 .owner = THIS_MODULE,
 462         },
 463         {
 464                 .name = "DCDC3",
 465                 .id = LP3972_DCDC3,
 466                 .ops = &lp3972_dcdc_ops,
 467                 .n_voltages = ARRAY_SIZE(buck23_voltage_map),
 468                 .volt_table = buck23_voltage_map,
 469                 .type = REGULATOR_VOLTAGE,
 470                 .owner = THIS_MODULE,
 471         },
 472 };
 473
 474 static int setup_regulators(struct lp3972 *lp3972,
 475         struct lp3972_platform_data *pdata)
 476 {
 477         int i, err;
 478
 479         /* Instantiate the regulators */
 480         for (i = 0; i < pdata->num_regulators; i++) {
 481                 struct lp3972_regulator_subdev *reg = &pdata->regulators[i];
 482                 struct regulator_config config = { };
 483                 struct regulator_dev *rdev;
 484
 485                 config.dev = lp3972->dev;
 486                 config.init_data = reg->initdata;
 487                 config.driver_data = lp3972;
 488
 489                 rdev = devm_regulator_register(lp3972->dev,
 490                                                &regulators[reg->id], &config);
 491                 if (IS_ERR(rdev)) {
 492                         err = PTR_ERR(rdev);
 493                         dev_err(lp3972->dev, "regulator init failed: %d\n",
 494                                 err);
 495                         return err;
 496                 }
 497         }
 498
 499         return 0;
 500 }
 501
 502 static int lp3972_i2c_probe(struct i2c_client *i2c,
 503                             const struct i2c_device_id *id)
 504 {
 505         struct lp3972 *lp3972;
 506         struct lp3972_platform_data *pdata = dev_get_platdata(&i2c->dev);
 507         int ret;
 508         u16 val;
 509
 510         if (!pdata) {
 511                 dev_dbg(&i2c->dev, "No platform init data supplied\n");
 512                 return -ENODEV;
 513         }
 514
 515         lp3972 = devm_kzalloc(&i2c->dev, sizeof(struct lp3972), GFP_KERNEL);
 516         if (!lp3972)
 517                 return -ENOMEM;
 518
 519         lp3972->i2c = i2c;
 520         lp3972->dev = &i2c->dev;
 521
 522         mutex_init(&lp3972->io_lock);
 523
 524         /* Detect LP3972 */
 525         ret = lp3972_i2c_read(i2c, LP3972_SYS_CONTROL1_REG, 1, &val);
 526         if (ret == 0 &&
 527                 (val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL) {
 528                 ret = -ENODEV;
 529                 dev_err(&i2c->dev, "chip reported: val = 0x%x\n", val);
 530         }
 531         if (ret < 0) {
 532                 dev_err(&i2c->dev, "failed to detect device. ret = %d\n", ret);
 533                 return ret;
 534         }
 535
 536         ret = setup_regulators(lp3972, pdata);
 537         if (ret < 0)
 538                 return ret;
 539
 540         i2c_set_clientdata(i2c, lp3972);
 541         return 0;
 542 }
 543
 544 static const struct i2c_device_id lp3972_i2c_id[] = {
 545         { "lp3972", 0 },
 546         { }
 547 };
 548 MODULE_DEVICE_TABLE(i2c, lp3972_i2c_id);
 549
 550 static struct i2c_driver lp3972_i2c_driver = {
 551         .driver = {
 552                 .name = "lp3972",
 553         },
 554         .probe    = lp3972_i2c_probe,
 555         .id_table = lp3972_i2c_id,
 556 };
 557
 558 static int __init lp3972_module_init(void)
 559 {
 560         return i2c_add_driver(&lp3972_i2c_driver);
 561 }
 562 subsys_initcall(lp3972_module_init);
 563
 564 static void __exit lp3972_module_exit(void)
 565 {
 566         i2c_del_driver(&lp3972_i2c_driver);
 567 }
 568 module_exit(lp3972_module_exit);
 569
 570 MODULE_LICENSE("GPL");
 571 MODULE_AUTHOR("Axel Lin <axel.lin@gmail.com>");
 572 MODULE_DESCRIPTION("LP3972 PMIC driver");