of: MSI: Simplify irqdomain lookup
[linux/fpc-iii.git] / drivers / rtc / rtc-pcf2123.c
blobea8a31c91641d46a7a5b44a2225a98e03c4317a3
1 /*
2 * An SPI driver for the Philips PCF2123 RTC
3 * Copyright 2009 Cyber Switching, Inc.
5 * Author: Chris Verges <chrisv@cyberswitching.com>
6 * Maintainers: http://www.cyberswitching.com
8 * based on the RS5C348 driver in this same directory.
10 * Thanks to Christian Pellegrin <chripell@fsfe.org> for
11 * the sysfs contributions to this driver.
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License version 2 as
15 * published by the Free Software Foundation.
17 * Please note that the CS is active high, so platform data
18 * should look something like:
20 * static struct spi_board_info ek_spi_devices[] = {
21 * ...
22 * {
23 * .modalias = "rtc-pcf2123",
24 * .chip_select = 1,
25 * .controller_data = (void *)AT91_PIN_PA10,
26 * .max_speed_hz = 1000 * 1000,
27 * .mode = SPI_CS_HIGH,
28 * .bus_num = 0,
29 * },
30 * ...
31 *};
35 #include <linux/bcd.h>
36 #include <linux/delay.h>
37 #include <linux/device.h>
38 #include <linux/errno.h>
39 #include <linux/init.h>
40 #include <linux/kernel.h>
41 #include <linux/of.h>
42 #include <linux/string.h>
43 #include <linux/slab.h>
44 #include <linux/rtc.h>
45 #include <linux/spi/spi.h>
46 #include <linux/module.h>
47 #include <linux/sysfs.h>
49 #define DRV_VERSION "0.6"
51 #define PCF2123_REG_CTRL1 (0x00) /* Control Register 1 */
52 #define PCF2123_REG_CTRL2 (0x01) /* Control Register 2 */
53 #define PCF2123_REG_SC (0x02) /* datetime */
54 #define PCF2123_REG_MN (0x03)
55 #define PCF2123_REG_HR (0x04)
56 #define PCF2123_REG_DM (0x05)
57 #define PCF2123_REG_DW (0x06)
58 #define PCF2123_REG_MO (0x07)
59 #define PCF2123_REG_YR (0x08)
61 #define PCF2123_SUBADDR (1 << 4)
62 #define PCF2123_WRITE ((0 << 7) | PCF2123_SUBADDR)
63 #define PCF2123_READ ((1 << 7) | PCF2123_SUBADDR)
65 static struct spi_driver pcf2123_driver;
67 struct pcf2123_sysfs_reg {
68 struct device_attribute attr;
69 char name[2];
72 struct pcf2123_plat_data {
73 struct rtc_device *rtc;
74 struct pcf2123_sysfs_reg regs[16];
78 * Causes a 30 nanosecond delay to ensure that the PCF2123 chip select
79 * is released properly after an SPI write. This function should be
80 * called after EVERY read/write call over SPI.
82 static inline void pcf2123_delay_trec(void)
84 ndelay(30);
87 static ssize_t pcf2123_show(struct device *dev, struct device_attribute *attr,
88 char *buffer)
90 struct spi_device *spi = to_spi_device(dev);
91 struct pcf2123_sysfs_reg *r;
92 u8 txbuf[1], rxbuf[1];
93 unsigned long reg;
94 int ret;
96 r = container_of(attr, struct pcf2123_sysfs_reg, attr);
98 ret = kstrtoul(r->name, 16, &reg);
99 if (ret)
100 return ret;
102 txbuf[0] = PCF2123_READ | reg;
103 ret = spi_write_then_read(spi, txbuf, 1, rxbuf, 1);
104 if (ret < 0)
105 return -EIO;
106 pcf2123_delay_trec();
107 return sprintf(buffer, "0x%x\n", rxbuf[0]);
110 static ssize_t pcf2123_store(struct device *dev, struct device_attribute *attr,
111 const char *buffer, size_t count) {
112 struct spi_device *spi = to_spi_device(dev);
113 struct pcf2123_sysfs_reg *r;
114 u8 txbuf[2];
115 unsigned long reg;
116 unsigned long val;
118 int ret;
120 r = container_of(attr, struct pcf2123_sysfs_reg, attr);
122 ret = kstrtoul(r->name, 16, &reg);
123 if (ret)
124 return ret;
126 ret = kstrtoul(buffer, 10, &val);
127 if (ret)
128 return ret;
130 txbuf[0] = PCF2123_WRITE | reg;
131 txbuf[1] = val;
132 ret = spi_write(spi, txbuf, sizeof(txbuf));
133 if (ret < 0)
134 return -EIO;
135 pcf2123_delay_trec();
136 return count;
139 static int pcf2123_rtc_read_time(struct device *dev, struct rtc_time *tm)
141 struct spi_device *spi = to_spi_device(dev);
142 u8 txbuf[1], rxbuf[7];
143 int ret;
145 txbuf[0] = PCF2123_READ | PCF2123_REG_SC;
146 ret = spi_write_then_read(spi, txbuf, sizeof(txbuf),
147 rxbuf, sizeof(rxbuf));
148 if (ret < 0)
149 return ret;
150 pcf2123_delay_trec();
152 tm->tm_sec = bcd2bin(rxbuf[0] & 0x7F);
153 tm->tm_min = bcd2bin(rxbuf[1] & 0x7F);
154 tm->tm_hour = bcd2bin(rxbuf[2] & 0x3F); /* rtc hr 0-23 */
155 tm->tm_mday = bcd2bin(rxbuf[3] & 0x3F);
156 tm->tm_wday = rxbuf[4] & 0x07;
157 tm->tm_mon = bcd2bin(rxbuf[5] & 0x1F) - 1; /* rtc mn 1-12 */
158 tm->tm_year = bcd2bin(rxbuf[6]);
159 if (tm->tm_year < 70)
160 tm->tm_year += 100; /* assume we are in 1970...2069 */
162 dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
163 "mday=%d, mon=%d, year=%d, wday=%d\n",
164 __func__,
165 tm->tm_sec, tm->tm_min, tm->tm_hour,
166 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
168 return rtc_valid_tm(tm);
171 static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
173 struct spi_device *spi = to_spi_device(dev);
174 u8 txbuf[8];
175 int ret;
177 dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
178 "mday=%d, mon=%d, year=%d, wday=%d\n",
179 __func__,
180 tm->tm_sec, tm->tm_min, tm->tm_hour,
181 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
183 /* Stop the counter first */
184 txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
185 txbuf[1] = 0x20;
186 ret = spi_write(spi, txbuf, 2);
187 if (ret < 0)
188 return ret;
189 pcf2123_delay_trec();
191 /* Set the new time */
192 txbuf[0] = PCF2123_WRITE | PCF2123_REG_SC;
193 txbuf[1] = bin2bcd(tm->tm_sec & 0x7F);
194 txbuf[2] = bin2bcd(tm->tm_min & 0x7F);
195 txbuf[3] = bin2bcd(tm->tm_hour & 0x3F);
196 txbuf[4] = bin2bcd(tm->tm_mday & 0x3F);
197 txbuf[5] = tm->tm_wday & 0x07;
198 txbuf[6] = bin2bcd((tm->tm_mon + 1) & 0x1F); /* rtc mn 1-12 */
199 txbuf[7] = bin2bcd(tm->tm_year < 100 ? tm->tm_year : tm->tm_year - 100);
201 ret = spi_write(spi, txbuf, sizeof(txbuf));
202 if (ret < 0)
203 return ret;
204 pcf2123_delay_trec();
206 /* Start the counter */
207 txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
208 txbuf[1] = 0x00;
209 ret = spi_write(spi, txbuf, 2);
210 if (ret < 0)
211 return ret;
212 pcf2123_delay_trec();
214 return 0;
217 static const struct rtc_class_ops pcf2123_rtc_ops = {
218 .read_time = pcf2123_rtc_read_time,
219 .set_time = pcf2123_rtc_set_time,
222 static int pcf2123_probe(struct spi_device *spi)
224 struct rtc_device *rtc;
225 struct pcf2123_plat_data *pdata;
226 u8 txbuf[2], rxbuf[2];
227 int ret, i;
229 pdata = devm_kzalloc(&spi->dev, sizeof(struct pcf2123_plat_data),
230 GFP_KERNEL);
231 if (!pdata)
232 return -ENOMEM;
233 spi->dev.platform_data = pdata;
235 /* Send a software reset command */
236 txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
237 txbuf[1] = 0x58;
238 dev_dbg(&spi->dev, "resetting RTC (0x%02X 0x%02X)\n",
239 txbuf[0], txbuf[1]);
240 ret = spi_write(spi, txbuf, 2 * sizeof(u8));
241 if (ret < 0)
242 goto kfree_exit;
243 pcf2123_delay_trec();
245 /* Stop the counter */
246 txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
247 txbuf[1] = 0x20;
248 dev_dbg(&spi->dev, "stopping RTC (0x%02X 0x%02X)\n",
249 txbuf[0], txbuf[1]);
250 ret = spi_write(spi, txbuf, 2 * sizeof(u8));
251 if (ret < 0)
252 goto kfree_exit;
253 pcf2123_delay_trec();
255 /* See if the counter was actually stopped */
256 txbuf[0] = PCF2123_READ | PCF2123_REG_CTRL1;
257 dev_dbg(&spi->dev, "checking for presence of RTC (0x%02X)\n",
258 txbuf[0]);
259 ret = spi_write_then_read(spi, txbuf, 1 * sizeof(u8),
260 rxbuf, 2 * sizeof(u8));
261 dev_dbg(&spi->dev, "received data from RTC (0x%02X 0x%02X)\n",
262 rxbuf[0], rxbuf[1]);
263 if (ret < 0)
264 goto kfree_exit;
265 pcf2123_delay_trec();
267 if (!(rxbuf[0] & 0x20)) {
268 dev_err(&spi->dev, "chip not found\n");
269 ret = -ENODEV;
270 goto kfree_exit;
273 dev_info(&spi->dev, "chip found, driver version " DRV_VERSION "\n");
274 dev_info(&spi->dev, "spiclk %u KHz.\n",
275 (spi->max_speed_hz + 500) / 1000);
277 /* Start the counter */
278 txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
279 txbuf[1] = 0x00;
280 ret = spi_write(spi, txbuf, sizeof(txbuf));
281 if (ret < 0)
282 goto kfree_exit;
283 pcf2123_delay_trec();
285 /* Finalize the initialization */
286 rtc = devm_rtc_device_register(&spi->dev, pcf2123_driver.driver.name,
287 &pcf2123_rtc_ops, THIS_MODULE);
289 if (IS_ERR(rtc)) {
290 dev_err(&spi->dev, "failed to register.\n");
291 ret = PTR_ERR(rtc);
292 goto kfree_exit;
295 pdata->rtc = rtc;
297 for (i = 0; i < 16; i++) {
298 sysfs_attr_init(&pdata->regs[i].attr.attr);
299 sprintf(pdata->regs[i].name, "%1x", i);
300 pdata->regs[i].attr.attr.mode = S_IRUGO | S_IWUSR;
301 pdata->regs[i].attr.attr.name = pdata->regs[i].name;
302 pdata->regs[i].attr.show = pcf2123_show;
303 pdata->regs[i].attr.store = pcf2123_store;
304 ret = device_create_file(&spi->dev, &pdata->regs[i].attr);
305 if (ret) {
306 dev_err(&spi->dev, "Unable to create sysfs %s\n",
307 pdata->regs[i].name);
308 goto sysfs_exit;
312 return 0;
314 sysfs_exit:
315 for (i--; i >= 0; i--)
316 device_remove_file(&spi->dev, &pdata->regs[i].attr);
318 kfree_exit:
319 spi->dev.platform_data = NULL;
320 return ret;
323 static int pcf2123_remove(struct spi_device *spi)
325 struct pcf2123_plat_data *pdata = dev_get_platdata(&spi->dev);
326 int i;
328 if (pdata) {
329 for (i = 0; i < 16; i++)
330 if (pdata->regs[i].name[0])
331 device_remove_file(&spi->dev,
332 &pdata->regs[i].attr);
335 return 0;
338 #ifdef CONFIG_OF
339 static const struct of_device_id pcf2123_dt_ids[] = {
340 { .compatible = "nxp,rtc-pcf2123", },
341 { /* sentinel */ }
343 MODULE_DEVICE_TABLE(of, pcf2123_dt_ids);
344 #endif
346 static struct spi_driver pcf2123_driver = {
347 .driver = {
348 .name = "rtc-pcf2123",
349 .of_match_table = of_match_ptr(pcf2123_dt_ids),
351 .probe = pcf2123_probe,
352 .remove = pcf2123_remove,
355 module_spi_driver(pcf2123_driver);
357 MODULE_AUTHOR("Chris Verges <chrisv@cyberswitching.com>");
358 MODULE_DESCRIPTION("NXP PCF2123 RTC driver");
359 MODULE_LICENSE("GPL");
360 MODULE_VERSION(DRV_VERSION);