2 * CDC Ethernet based networking peripherals
3 * Copyright (C) 2003-2005 by David Brownell
4 * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
20 // #define DEBUG // error path messages, extra info
21 // #define VERBOSE // more; success messages
23 #include <linux/module.h>
24 #include <linux/netdevice.h>
25 #include <linux/etherdevice.h>
26 #include <linux/ethtool.h>
27 #include <linux/workqueue.h>
28 #include <linux/mii.h>
29 #include <linux/usb.h>
30 #include <linux/usb/cdc.h>
31 #include <linux/usb/usbnet.h>
34 #if IS_ENABLED(CONFIG_USB_NET_RNDIS_HOST)
36 static int is_rndis(struct usb_interface_descriptor
*desc
)
38 return (desc
->bInterfaceClass
== USB_CLASS_COMM
&&
39 desc
->bInterfaceSubClass
== 2 &&
40 desc
->bInterfaceProtocol
== 0xff);
43 static int is_activesync(struct usb_interface_descriptor
*desc
)
45 return (desc
->bInterfaceClass
== USB_CLASS_MISC
&&
46 desc
->bInterfaceSubClass
== 1 &&
47 desc
->bInterfaceProtocol
== 1);
50 static int is_wireless_rndis(struct usb_interface_descriptor
*desc
)
52 return (desc
->bInterfaceClass
== USB_CLASS_WIRELESS_CONTROLLER
&&
53 desc
->bInterfaceSubClass
== 1 &&
54 desc
->bInterfaceProtocol
== 3);
59 #define is_rndis(desc) 0
60 #define is_activesync(desc) 0
61 #define is_wireless_rndis(desc) 0
65 static const u8 mbm_guid
[16] = {
66 0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01,
67 0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
70 static void usbnet_cdc_update_filter(struct usbnet
*dev
)
72 struct cdc_state
*info
= (void *) &dev
->data
;
73 struct usb_interface
*intf
= info
->control
;
74 struct net_device
*net
= dev
->net
;
76 u16 cdc_filter
= USB_CDC_PACKET_TYPE_DIRECTED
77 | USB_CDC_PACKET_TYPE_BROADCAST
;
79 /* filtering on the device is an optional feature and not worth
80 * the hassle so we just roughly care about snooping and if any
81 * multicast is requested, we take every multicast
83 if (net
->flags
& IFF_PROMISC
)
84 cdc_filter
|= USB_CDC_PACKET_TYPE_PROMISCUOUS
;
85 if (!netdev_mc_empty(net
) || (net
->flags
& IFF_ALLMULTI
))
86 cdc_filter
|= USB_CDC_PACKET_TYPE_ALL_MULTICAST
;
88 usb_control_msg(dev
->udev
,
89 usb_sndctrlpipe(dev
->udev
, 0),
90 USB_CDC_SET_ETHERNET_PACKET_FILTER
,
91 USB_TYPE_CLASS
| USB_RECIP_INTERFACE
,
93 intf
->cur_altsetting
->desc
.bInterfaceNumber
,
100 /* probes control interface, claims data interface, collects the bulk
101 * endpoints, activates data interface (if needed), maybe sets MTU.
102 * all pure cdc, except for certain firmware workarounds, and knowing
103 * that rndis uses one different rule.
105 int usbnet_generic_cdc_bind(struct usbnet
*dev
, struct usb_interface
*intf
)
107 u8
*buf
= intf
->cur_altsetting
->extra
;
108 int len
= intf
->cur_altsetting
->extralen
;
109 struct usb_interface_descriptor
*d
;
110 struct cdc_state
*info
= (void *) &dev
->data
;
113 bool android_rndis_quirk
= false;
114 struct usb_driver
*driver
= driver_of(intf
);
115 struct usb_cdc_parsed_header header
;
117 if (sizeof(dev
->data
) < sizeof(*info
))
120 /* expect strict spec conformance for the descriptors, but
121 * cope with firmware which stores them in the wrong place
123 if (len
== 0 && dev
->udev
->actconfig
->extralen
) {
124 /* Motorola SB4100 (and others: Brad Hards says it's
125 * from a Broadcom design) put CDC descriptors here
127 buf
= dev
->udev
->actconfig
->extra
;
128 len
= dev
->udev
->actconfig
->extralen
;
129 dev_dbg(&intf
->dev
, "CDC descriptors on config\n");
132 /* Maybe CDC descriptors are after the endpoint? This bug has
133 * been seen on some 2Wire Inc RNDIS-ish products.
136 struct usb_host_endpoint
*hep
;
138 hep
= intf
->cur_altsetting
->endpoint
;
145 "CDC descriptors on endpoint\n");
148 /* this assumes that if there's a non-RNDIS vendor variant
149 * of cdc-acm, it'll fail RNDIS requests cleanly.
151 rndis
= (is_rndis(&intf
->cur_altsetting
->desc
) ||
152 is_activesync(&intf
->cur_altsetting
->desc
) ||
153 is_wireless_rndis(&intf
->cur_altsetting
->desc
));
155 memset(info
, 0, sizeof(*info
));
156 info
->control
= intf
;
158 cdc_parse_cdc_header(&header
, intf
, buf
, len
);
160 info
->u
= header
.usb_cdc_union_desc
;
161 info
->header
= header
.usb_cdc_header_desc
;
162 info
->ether
= header
.usb_cdc_ether_desc
;
166 else /* in that case a quirk is mandatory */
169 /* we need a master/control interface (what we're
170 * probed with) and a slave/data interface; union
171 * descriptors sort this all out.
173 info
->control
= usb_ifnum_to_if(dev
->udev
,
174 info
->u
->bMasterInterface0
);
175 info
->data
= usb_ifnum_to_if(dev
->udev
,
176 info
->u
->bSlaveInterface0
);
177 if (!info
->control
|| !info
->data
) {
179 "master #%u/%p slave #%u/%p\n",
180 info
->u
->bMasterInterface0
,
182 info
->u
->bSlaveInterface0
,
184 /* fall back to hard-wiring for RNDIS */
186 android_rndis_quirk
= true;
191 if (info
->control
!= intf
) {
192 dev_dbg(&intf
->dev
, "bogus CDC Union\n");
193 /* Ambit USB Cable Modem (and maybe others)
194 * interchanges master and slave interface.
196 if (info
->data
== intf
) {
197 info
->data
= info
->control
;
198 info
->control
= intf
;
203 /* some devices merge these - skip class check */
204 if (info
->control
== info
->data
)
207 /* a data interface altsetting does the real i/o */
208 d
= &info
->data
->cur_altsetting
->desc
;
209 if (d
->bInterfaceClass
!= USB_CLASS_CDC_DATA
) {
210 dev_dbg(&intf
->dev
, "slave class %u\n",
216 header
.usb_cdc_acm_descriptor
&&
217 header
.usb_cdc_acm_descriptor
->bmCapabilities
) {
219 "ACM capabilities %02x, not really RNDIS?\n",
220 header
.usb_cdc_acm_descriptor
->bmCapabilities
);
224 if (header
.usb_cdc_ether_desc
) {
225 dev
->hard_mtu
= le16_to_cpu(info
->ether
->wMaxSegmentSize
);
226 /* because of Zaurus, we may be ignoring the host
227 * side link address we were given.
231 if (header
.usb_cdc_mdlm_desc
&&
232 memcmp(header
.usb_cdc_mdlm_desc
->bGUID
, mbm_guid
, 16)) {
233 dev_dbg(&intf
->dev
, "GUID doesn't match\n");
237 if (header
.usb_cdc_mdlm_detail_desc
&&
238 header
.usb_cdc_mdlm_detail_desc
->bLength
<
239 (sizeof(struct usb_cdc_mdlm_detail_desc
) + 1)) {
240 dev_dbg(&intf
->dev
, "Descriptor too short\n");
246 /* Microsoft ActiveSync based and some regular RNDIS devices lack the
247 * CDC descriptors, so we'll hard-wire the interfaces and not check
250 * Some Android RNDIS devices have a CDC Union descriptor pointing
251 * to non-existing interfaces. Ignore that and attempt the same
252 * hard-wired 0 and 1 interfaces.
254 if (rndis
&& (!info
->u
|| android_rndis_quirk
)) {
255 info
->control
= usb_ifnum_to_if(dev
->udev
, 0);
256 info
->data
= usb_ifnum_to_if(dev
->udev
, 1);
257 if (!info
->control
|| !info
->data
|| info
->control
!= intf
) {
259 "rndis: master #0/%p slave #1/%p\n",
265 } else if (!info
->header
|| (!rndis
&& !info
->ether
)) {
266 dev_dbg(&intf
->dev
, "missing cdc %s%s%sdescriptor\n",
267 info
->header
? "" : "header ",
268 info
->u
? "" : "union ",
269 info
->ether
? "" : "ether ");
273 /* claim data interface and set it up ... with side effects.
274 * network traffic can't flow until an altsetting is enabled.
276 if (info
->data
!= info
->control
) {
277 status
= usb_driver_claim_interface(driver
, info
->data
, dev
);
281 status
= usbnet_get_endpoints(dev
, info
->data
);
283 /* ensure immediate exit from usbnet_disconnect */
284 usb_set_intfdata(info
->data
, NULL
);
285 if (info
->data
!= info
->control
)
286 usb_driver_release_interface(driver
, info
->data
);
290 /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
291 if (info
->data
!= info
->control
)
293 if (info
->control
->cur_altsetting
->desc
.bNumEndpoints
== 1) {
294 struct usb_endpoint_descriptor
*desc
;
296 dev
->status
= &info
->control
->cur_altsetting
->endpoint
[0];
297 desc
= &dev
->status
->desc
;
298 if (!usb_endpoint_is_int_in(desc
) ||
299 (le16_to_cpu(desc
->wMaxPacketSize
)
300 < sizeof(struct usb_cdc_notification
)) ||
302 dev_dbg(&intf
->dev
, "bad notification endpoint\n");
306 if (rndis
&& !dev
->status
) {
307 dev_dbg(&intf
->dev
, "missing RNDIS status endpoint\n");
308 usb_set_intfdata(info
->data
, NULL
);
309 usb_driver_release_interface(driver
, info
->data
);
313 /* Some devices don't initialise properly. In particular
314 * the packet filter is not reset. There are devices that
315 * don't do reset all the way. So the packet filter should
316 * be set to a sane initial value.
318 usbnet_cdc_update_filter(dev
);
323 dev_info(&dev
->udev
->dev
, "bad CDC descriptors\n");
326 EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind
);
328 void usbnet_cdc_unbind(struct usbnet
*dev
, struct usb_interface
*intf
)
330 struct cdc_state
*info
= (void *) &dev
->data
;
331 struct usb_driver
*driver
= driver_of(intf
);
333 /* combined interface - nothing to do */
334 if (info
->data
== info
->control
)
337 /* disconnect master --> disconnect slave */
338 if (intf
== info
->control
&& info
->data
) {
339 /* ensure immediate exit from usbnet_disconnect */
340 usb_set_intfdata(info
->data
, NULL
);
341 usb_driver_release_interface(driver
, info
->data
);
345 /* and vice versa (just in case) */
346 else if (intf
== info
->data
&& info
->control
) {
347 /* ensure immediate exit from usbnet_disconnect */
348 usb_set_intfdata(info
->control
, NULL
);
349 usb_driver_release_interface(driver
, info
->control
);
350 info
->control
= NULL
;
353 EXPORT_SYMBOL_GPL(usbnet_cdc_unbind
);
355 /* Communications Device Class, Ethernet Control model
357 * Takes two interfaces. The DATA interface is inactive till an altsetting
358 * is selected. Configuration data includes class descriptors. There's
359 * an optional status endpoint on the control interface.
361 * This should interop with whatever the 2.4 "CDCEther.c" driver
362 * (by Brad Hards) talked with, with more functionality.
365 static void dumpspeed(struct usbnet
*dev
, __le32
*speeds
)
367 netif_info(dev
, timer
, dev
->net
,
368 "link speeds: %u kbps up, %u kbps down\n",
369 __le32_to_cpu(speeds
[0]) / 1000,
370 __le32_to_cpu(speeds
[1]) / 1000);
373 void usbnet_cdc_status(struct usbnet
*dev
, struct urb
*urb
)
375 struct usb_cdc_notification
*event
;
377 if (urb
->actual_length
< sizeof(*event
))
380 /* SPEED_CHANGE can get split into two 8-byte packets */
381 if (test_and_clear_bit(EVENT_STS_SPLIT
, &dev
->flags
)) {
382 dumpspeed(dev
, (__le32
*) urb
->transfer_buffer
);
386 event
= urb
->transfer_buffer
;
387 switch (event
->bNotificationType
) {
388 case USB_CDC_NOTIFY_NETWORK_CONNECTION
:
389 netif_dbg(dev
, timer
, dev
->net
, "CDC: carrier %s\n",
390 event
->wValue
? "on" : "off");
391 usbnet_link_change(dev
, !!event
->wValue
, 0);
393 case USB_CDC_NOTIFY_SPEED_CHANGE
: /* tx/rx rates */
394 netif_dbg(dev
, timer
, dev
->net
, "CDC: speed change (len %d)\n",
396 if (urb
->actual_length
!= (sizeof(*event
) + 8))
397 set_bit(EVENT_STS_SPLIT
, &dev
->flags
);
399 dumpspeed(dev
, (__le32
*) &event
[1]);
401 /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
402 * but there are no standard formats for the response data.
405 netdev_err(dev
->net
, "CDC: unexpected notification %02x!\n",
406 event
->bNotificationType
);
410 EXPORT_SYMBOL_GPL(usbnet_cdc_status
);
412 int usbnet_cdc_bind(struct usbnet
*dev
, struct usb_interface
*intf
)
415 struct cdc_state
*info
= (void *) &dev
->data
;
417 BUILD_BUG_ON((sizeof(((struct usbnet
*)0)->data
)
418 < sizeof(struct cdc_state
)));
420 status
= usbnet_generic_cdc_bind(dev
, intf
);
424 status
= usbnet_get_ethernet_addr(dev
, info
->ether
->iMACAddress
);
426 usb_set_intfdata(info
->data
, NULL
);
427 usb_driver_release_interface(driver_of(intf
), info
->data
);
433 EXPORT_SYMBOL_GPL(usbnet_cdc_bind
);
435 static int usbnet_cdc_zte_bind(struct usbnet
*dev
, struct usb_interface
*intf
)
437 int status
= usbnet_cdc_bind(dev
, intf
);
439 if (!status
&& (dev
->net
->dev_addr
[0] & 0x02))
440 eth_hw_addr_random(dev
->net
);
445 /* Make sure packets have correct destination MAC address
447 * A firmware bug observed on some devices (ZTE MF823/831/910) is that the
448 * device sends packets with a static, bogus, random MAC address (event if
449 * device MAC address has been updated). Always set MAC address to that of the
452 static int usbnet_cdc_zte_rx_fixup(struct usbnet
*dev
, struct sk_buff
*skb
)
454 if (skb
->len
< ETH_HLEN
|| !(skb
->data
[0] & 0x02))
457 skb_reset_mac_header(skb
);
458 ether_addr_copy(eth_hdr(skb
)->h_dest
, dev
->net
->dev_addr
);
463 /* Ensure correct link state
465 * Some devices (ZTE MF823/831/910) export two carrier on notifications when
466 * connected. This causes the link state to be incorrect. Work around this by
467 * always setting the state to off, then on.
469 void usbnet_cdc_zte_status(struct usbnet
*dev
, struct urb
*urb
)
471 struct usb_cdc_notification
*event
;
473 if (urb
->actual_length
< sizeof(*event
))
476 event
= urb
->transfer_buffer
;
478 if (event
->bNotificationType
!= USB_CDC_NOTIFY_NETWORK_CONNECTION
) {
479 usbnet_cdc_status(dev
, urb
);
483 netif_dbg(dev
, timer
, dev
->net
, "CDC: carrier %s\n",
484 event
->wValue
? "on" : "off");
487 netif_carrier_ok(dev
->net
))
488 netif_carrier_off(dev
->net
);
490 usbnet_link_change(dev
, !!event
->wValue
, 0);
493 static const struct driver_info cdc_info
= {
494 .description
= "CDC Ethernet Device",
495 .flags
= FLAG_ETHER
| FLAG_POINTTOPOINT
,
496 .bind
= usbnet_cdc_bind
,
497 .unbind
= usbnet_cdc_unbind
,
498 .status
= usbnet_cdc_status
,
499 .set_rx_mode
= usbnet_cdc_update_filter
,
500 .manage_power
= usbnet_manage_power
,
503 static const struct driver_info zte_cdc_info
= {
504 .description
= "ZTE CDC Ethernet Device",
505 .flags
= FLAG_ETHER
| FLAG_POINTTOPOINT
,
506 .bind
= usbnet_cdc_zte_bind
,
507 .unbind
= usbnet_cdc_unbind
,
508 .status
= usbnet_cdc_zte_status
,
509 .set_rx_mode
= usbnet_cdc_update_filter
,
510 .manage_power
= usbnet_manage_power
,
511 .rx_fixup
= usbnet_cdc_zte_rx_fixup
,
514 static const struct driver_info wwan_info
= {
515 .description
= "Mobile Broadband Network Device",
517 .bind
= usbnet_cdc_bind
,
518 .unbind
= usbnet_cdc_unbind
,
519 .status
= usbnet_cdc_status
,
520 .set_rx_mode
= usbnet_cdc_update_filter
,
521 .manage_power
= usbnet_manage_power
,
524 /*-------------------------------------------------------------------------*/
526 #define HUAWEI_VENDOR_ID 0x12D1
527 #define NOVATEL_VENDOR_ID 0x1410
528 #define ZTE_VENDOR_ID 0x19D2
529 #define DELL_VENDOR_ID 0x413C
530 #define REALTEK_VENDOR_ID 0x0bda
531 #define SAMSUNG_VENDOR_ID 0x04e8
532 #define LENOVO_VENDOR_ID 0x17ef
533 #define NVIDIA_VENDOR_ID 0x0955
535 static const struct usb_device_id products
[] = {
538 * First blacklist any products that are egregiously nonconformant
539 * with the CDC Ethernet specs. Minor braindamage we cope with; when
540 * they're not even trying, needing a separate driver is only the first
541 * of the differences to show up.
544 #define ZAURUS_MASTER_INTERFACE \
545 .bInterfaceClass = USB_CLASS_COMM, \
546 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
547 .bInterfaceProtocol = USB_CDC_PROTO_NONE
549 /* SA-1100 based Sharp Zaurus ("collie"), or compatible;
550 * wire-incompatible with true CDC Ethernet implementations.
551 * (And, it seems, needlessly so...)
554 .match_flags
= USB_DEVICE_ID_MATCH_INT_INFO
555 | USB_DEVICE_ID_MATCH_DEVICE
,
558 ZAURUS_MASTER_INTERFACE
,
562 /* PXA-25x based Sharp Zaurii. Note that it seems some of these
563 * (later models especially) may have shipped only with firmware
564 * advertising false "CDC MDLM" compatibility ... but we're not
565 * clear which models did that, so for now let's assume the worst.
568 .match_flags
= USB_DEVICE_ID_MATCH_INT_INFO
569 | USB_DEVICE_ID_MATCH_DEVICE
,
571 .idProduct
= 0x8005, /* A-300 */
572 ZAURUS_MASTER_INTERFACE
,
575 .match_flags
= USB_DEVICE_ID_MATCH_INT_INFO
576 | USB_DEVICE_ID_MATCH_DEVICE
,
578 .idProduct
= 0x8006, /* B-500/SL-5600 */
579 ZAURUS_MASTER_INTERFACE
,
582 .match_flags
= USB_DEVICE_ID_MATCH_INT_INFO
583 | USB_DEVICE_ID_MATCH_DEVICE
,
585 .idProduct
= 0x8007, /* C-700 */
586 ZAURUS_MASTER_INTERFACE
,
589 .match_flags
= USB_DEVICE_ID_MATCH_INT_INFO
590 | USB_DEVICE_ID_MATCH_DEVICE
,
592 .idProduct
= 0x9031, /* C-750 C-760 */
593 ZAURUS_MASTER_INTERFACE
,
596 .match_flags
= USB_DEVICE_ID_MATCH_INT_INFO
597 | USB_DEVICE_ID_MATCH_DEVICE
,
599 .idProduct
= 0x9032, /* SL-6000 */
600 ZAURUS_MASTER_INTERFACE
,
603 .match_flags
= USB_DEVICE_ID_MATCH_INT_INFO
604 | USB_DEVICE_ID_MATCH_DEVICE
,
606 /* reported with some C860 units */
607 .idProduct
= 0x9050, /* C-860 */
608 ZAURUS_MASTER_INTERFACE
,
612 /* Olympus has some models with a Zaurus-compatible option.
613 * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
616 .match_flags
= USB_DEVICE_ID_MATCH_INT_INFO
617 | USB_DEVICE_ID_MATCH_DEVICE
,
619 .idProduct
= 0x0F02, /* R-1000 */
620 ZAURUS_MASTER_INTERFACE
,
624 /* LG Electronics VL600 wants additional headers on every frame */
626 USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM
,
627 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
631 /* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
633 USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM
,
634 USB_CDC_SUBCLASS_MDLM
, USB_CDC_PROTO_NONE
),
638 /* Novatel USB551L and MC551 - handled by qmi_wwan */
640 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID
, 0xB001, USB_CLASS_COMM
,
641 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
645 /* Novatel E362 - handled by qmi_wwan */
647 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID
, 0x9010, USB_CLASS_COMM
,
648 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
652 /* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
654 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID
, 0x8195, USB_CLASS_COMM
,
655 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
659 /* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
661 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID
, 0x8196, USB_CLASS_COMM
,
662 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
666 /* Dell Wireless 5804 (Novatel E371) - handled by qmi_wwan */
668 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID
, 0x819b, USB_CLASS_COMM
,
669 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
673 /* Novatel Expedite E371 - handled by qmi_wwan */
675 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID
, 0x9011, USB_CLASS_COMM
,
676 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
680 /* AnyDATA ADU960S - handled by qmi_wwan */
682 USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM
,
683 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
687 /* Huawei E1820 - handled by qmi_wwan */
689 USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID
, 0x14ac, 1),
693 /* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
695 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID
, 0x8152, USB_CLASS_COMM
,
696 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
700 /* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
702 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID
, 0x8153, USB_CLASS_COMM
,
703 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
707 /* Samsung USB Ethernet Adapters */
709 USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID
, 0xa101, USB_CLASS_COMM
,
710 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
714 /* ThinkPad USB-C Dock (based on Realtek RTL8153) */
716 USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID
, 0x3062, USB_CLASS_COMM
,
717 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
721 /* ThinkPad Thunderbolt 3 Dock (based on Realtek RTL8153) */
723 USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID
, 0x3069, USB_CLASS_COMM
,
724 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
728 /* Lenovo Thinkpad USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
730 USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID
, 0x7205, USB_CLASS_COMM
,
731 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
735 /* Lenovo USB C to Ethernet Adapter (based on Realtek RTL8153) */
737 USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID
, 0x720c, USB_CLASS_COMM
,
738 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
742 /* Lenovo USB-C Travel Hub (based on Realtek RTL8153) */
744 USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID
, 0x7214, USB_CLASS_COMM
,
745 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
749 /* NVIDIA Tegra USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
751 USB_DEVICE_AND_INTERFACE_INFO(NVIDIA_VENDOR_ID
, 0x09ff, USB_CLASS_COMM
,
752 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
758 * CDC Ether uses two interfaces, not necessarily consecutive.
759 * We match the main interface, ignoring the optional device
760 * class so we could handle devices that aren't exclusively
763 * NOTE: this match must come AFTER entries blacklisting devices
764 * because of bugs/quirks in a given product (like Zaurus, above).
767 /* ZTE (Vodafone) K3805-Z */
768 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID
, 0x1003, USB_CLASS_COMM
,
769 USB_CDC_SUBCLASS_ETHERNET
,
771 .driver_info
= (unsigned long)&wwan_info
,
773 /* ZTE (Vodafone) K3806-Z */
774 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID
, 0x1015, USB_CLASS_COMM
,
775 USB_CDC_SUBCLASS_ETHERNET
,
777 .driver_info
= (unsigned long)&wwan_info
,
779 /* ZTE (Vodafone) K4510-Z */
780 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID
, 0x1173, USB_CLASS_COMM
,
781 USB_CDC_SUBCLASS_ETHERNET
,
783 .driver_info
= (unsigned long)&wwan_info
,
785 /* ZTE (Vodafone) K3770-Z */
786 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID
, 0x1177, USB_CLASS_COMM
,
787 USB_CDC_SUBCLASS_ETHERNET
,
789 .driver_info
= (unsigned long)&wwan_info
,
791 /* ZTE (Vodafone) K3772-Z */
792 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID
, 0x1181, USB_CLASS_COMM
,
793 USB_CDC_SUBCLASS_ETHERNET
,
795 .driver_info
= (unsigned long)&wwan_info
,
798 USB_VENDOR_AND_INTERFACE_INFO(0x1bc7, USB_CLASS_COMM
,
799 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
800 .driver_info
= (kernel_ulong_t
) &wwan_info
,
802 /* Dell DW5580 modules */
803 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID
, 0x81ba, USB_CLASS_COMM
,
804 USB_CDC_SUBCLASS_ETHERNET
, USB_CDC_PROTO_NONE
),
805 .driver_info
= (kernel_ulong_t
)&wwan_info
,
808 USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID
, USB_CLASS_COMM
,
809 USB_CDC_SUBCLASS_ETHERNET
,
811 .driver_info
= (unsigned long)&zte_cdc_info
,
813 USB_INTERFACE_INFO(USB_CLASS_COMM
, USB_CDC_SUBCLASS_ETHERNET
,
815 .driver_info
= (unsigned long) &cdc_info
,
817 USB_INTERFACE_INFO(USB_CLASS_COMM
, USB_CDC_SUBCLASS_MDLM
,
819 .driver_info
= (unsigned long)&wwan_info
,
822 /* Various Huawei modems with a network port like the UMG1831 */
823 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID
, USB_CLASS_COMM
,
824 USB_CDC_SUBCLASS_ETHERNET
, 255),
825 .driver_info
= (unsigned long)&wwan_info
,
829 MODULE_DEVICE_TABLE(usb
, products
);
831 static struct usb_driver cdc_driver
= {
833 .id_table
= products
,
834 .probe
= usbnet_probe
,
835 .disconnect
= usbnet_disconnect
,
836 .suspend
= usbnet_suspend
,
837 .resume
= usbnet_resume
,
838 .reset_resume
= usbnet_resume
,
839 .supports_autosuspend
= 1,
840 .disable_hub_initiated_lpm
= 1,
843 module_usb_driver(cdc_driver
);
845 MODULE_AUTHOR("David Brownell");
846 MODULE_DESCRIPTION("USB CDC Ethernet devices");
847 MODULE_LICENSE("GPL");