?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
mmc: sdhci-of-esdhc: use of_property_read_bool
[linux/fpc-iii.git] / drivers / bluetooth / hci_intel.c
blobed0a4201b551a64773ab5eea3f75f87a15973c03
1 /*
2 *
3 * Bluetooth HCI UART driver for Intel devices
4 *
5 * Copyright (C) 2015 Intel Corporation
6 *
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 *
22 */
23
24 #include <linux/kernel.h>
25 #include <linux/errno.h>
26 #include <linux/skbuff.h>
27 #include <linux/firmware.h>
28 #include <linux/module.h>
29 #include <linux/wait.h>
30 #include <linux/tty.h>
31 #include <linux/platform_device.h>
32 #include <linux/gpio/consumer.h>
33 #include <linux/acpi.h>
34 #include <linux/interrupt.h>
35 #include <linux/pm_runtime.h>
36
37 #include <net/bluetooth/bluetooth.h>
38 #include <net/bluetooth/hci_core.h>
39
40 #include "hci_uart.h"
41 #include "btintel.h"
42
43 #define STATE_BOOTLOADER 0
44 #define STATE_DOWNLOADING 1
45 #define STATE_FIRMWARE_LOADED 2
46 #define STATE_FIRMWARE_FAILED 3
47 #define STATE_BOOTING 4
48 #define STATE_LPM_ENABLED 5
49 #define STATE_TX_ACTIVE 6
50 #define STATE_SUSPENDED 7
51 #define STATE_LPM_TRANSACTION 8
52
53 #define HCI_LPM_WAKE_PKT 0xf0
54 #define HCI_LPM_PKT 0xf1
55 #define HCI_LPM_MAX_SIZE 10
56 #define HCI_LPM_HDR_SIZE HCI_EVENT_HDR_SIZE
57
58 #define LPM_OP_TX_NOTIFY 0x00
59 #define LPM_OP_SUSPEND_ACK 0x02
60 #define LPM_OP_RESUME_ACK 0x03
61
62 #define LPM_SUSPEND_DELAY_MS 1000
63
64 struct hci_lpm_pkt {
65 __u8 opcode;
66 __u8 dlen;
67 __u8 data[0];
68 } __packed;
69
70 struct intel_device {
71 struct list_head list;
72 struct platform_device *pdev;
73 struct gpio_desc *reset;
74 struct hci_uart *hu;
75 struct mutex hu_lock;
76 int irq;
77 };
78
79 static LIST_HEAD(intel_device_list);
80 static DEFINE_MUTEX(intel_device_list_lock);
81
82 struct intel_data {
83 struct sk_buff *rx_skb;
84 struct sk_buff_head txq;
85 struct work_struct busy_work;
86 struct hci_uart *hu;
87 unsigned long flags;
88 };
89
90 static u8 intel_convert_speed(unsigned int speed)
91 {
92 switch (speed) {
93 case 9600:
94 return 0x00;
95 case 19200:
96 return 0x01;
97 case 38400:
98 return 0x02;
99 case 57600:
100 return 0x03;
101 case 115200:
102 return 0x04;
103 case 230400:
104 return 0x05;
105 case 460800:
106 return 0x06;
107 case 921600:
108 return 0x07;
109 case 1843200:
110 return 0x08;
111 case 3250000:
112 return 0x09;
113 case 2000000:
114 return 0x0a;
115 case 3000000:
116 return 0x0b;
117 default:
118 return 0xff;
119 }
120 }
121
122 static int intel_wait_booting(struct hci_uart *hu)
123 {
124 struct intel_data *intel = hu->priv;
125 int err;
126
127 err = wait_on_bit_timeout(&intel->flags, STATE_BOOTING,
128 TASK_INTERRUPTIBLE,
129 msecs_to_jiffies(1000));
130
131 if (err == 1) {
132 bt_dev_err(hu->hdev, "Device boot interrupted");
133 return -EINTR;
134 }
135
136 if (err) {
137 bt_dev_err(hu->hdev, "Device boot timeout");
138 return -ETIMEDOUT;
139 }
140
141 return err;
142 }
143
144 #ifdef CONFIG_PM
145 static int intel_wait_lpm_transaction(struct hci_uart *hu)
146 {
147 struct intel_data *intel = hu->priv;
148 int err;
149
150 err = wait_on_bit_timeout(&intel->flags, STATE_LPM_TRANSACTION,
151 TASK_INTERRUPTIBLE,
152 msecs_to_jiffies(1000));
153
154 if (err == 1) {
155 bt_dev_err(hu->hdev, "LPM transaction interrupted");
156 return -EINTR;
157 }
158
159 if (err) {
160 bt_dev_err(hu->hdev, "LPM transaction timeout");
161 return -ETIMEDOUT;
162 }
163
164 return err;
165 }
166
167 static int intel_lpm_suspend(struct hci_uart *hu)
168 {
169 static const u8 suspend[] = { 0x01, 0x01, 0x01 };
170 struct intel_data *intel = hu->priv;
171 struct sk_buff *skb;
172
173 if (!test_bit(STATE_LPM_ENABLED, &intel->flags) ||
174 test_bit(STATE_SUSPENDED, &intel->flags))
175 return 0;
176
177 if (test_bit(STATE_TX_ACTIVE, &intel->flags))
178 return -EAGAIN;
179
180 bt_dev_dbg(hu->hdev, "Suspending");
181
182 skb = bt_skb_alloc(sizeof(suspend), GFP_KERNEL);
183 if (!skb) {
184 bt_dev_err(hu->hdev, "Failed to alloc memory for LPM packet");
185 return -ENOMEM;
186 }
187
188 memcpy(skb_put(skb, sizeof(suspend)), suspend, sizeof(suspend));
189 hci_skb_pkt_type(skb) = HCI_LPM_PKT;
190
191 set_bit(STATE_LPM_TRANSACTION, &intel->flags);
192
193 /* LPM flow is a priority, enqueue packet at list head */
194 skb_queue_head(&intel->txq, skb);
195 hci_uart_tx_wakeup(hu);
196
197 intel_wait_lpm_transaction(hu);
198 /* Even in case of failure, continue and test the suspended flag */
199
200 clear_bit(STATE_LPM_TRANSACTION, &intel->flags);
201
202 if (!test_bit(STATE_SUSPENDED, &intel->flags)) {
203 bt_dev_err(hu->hdev, "Device suspend error");
204 return -EINVAL;
205 }
206
207 bt_dev_dbg(hu->hdev, "Suspended");
208
209 hci_uart_set_flow_control(hu, true);
210
211 return 0;
212 }
213
214 static int intel_lpm_resume(struct hci_uart *hu)
215 {
216 struct intel_data *intel = hu->priv;
217 struct sk_buff *skb;
218
219 if (!test_bit(STATE_LPM_ENABLED, &intel->flags) ||
220 !test_bit(STATE_SUSPENDED, &intel->flags))
221 return 0;
222
223 bt_dev_dbg(hu->hdev, "Resuming");
224
225 hci_uart_set_flow_control(hu, false);
226
227 skb = bt_skb_alloc(0, GFP_KERNEL);
228 if (!skb) {
229 bt_dev_err(hu->hdev, "Failed to alloc memory for LPM packet");
230 return -ENOMEM;
231 }
232
233 hci_skb_pkt_type(skb) = HCI_LPM_WAKE_PKT;
234
235 set_bit(STATE_LPM_TRANSACTION, &intel->flags);
236
237 /* LPM flow is a priority, enqueue packet at list head */
238 skb_queue_head(&intel->txq, skb);
239 hci_uart_tx_wakeup(hu);
240
241 intel_wait_lpm_transaction(hu);
242 /* Even in case of failure, continue and test the suspended flag */
243
244 clear_bit(STATE_LPM_TRANSACTION, &intel->flags);
245
246 if (test_bit(STATE_SUSPENDED, &intel->flags)) {
247 bt_dev_err(hu->hdev, "Device resume error");
248 return -EINVAL;
249 }
250
251 bt_dev_dbg(hu->hdev, "Resumed");
252
253 return 0;
254 }
255 #endif /* CONFIG_PM */
256
257 static int intel_lpm_host_wake(struct hci_uart *hu)
258 {
259 static const u8 lpm_resume_ack[] = { LPM_OP_RESUME_ACK, 0x00 };
260 struct intel_data *intel = hu->priv;
261 struct sk_buff *skb;
262
263 hci_uart_set_flow_control(hu, false);
264
265 clear_bit(STATE_SUSPENDED, &intel->flags);
266
267 skb = bt_skb_alloc(sizeof(lpm_resume_ack), GFP_KERNEL);
268 if (!skb) {
269 bt_dev_err(hu->hdev, "Failed to alloc memory for LPM packet");
270 return -ENOMEM;
271 }
272
273 memcpy(skb_put(skb, sizeof(lpm_resume_ack)), lpm_resume_ack,
274 sizeof(lpm_resume_ack));
275 hci_skb_pkt_type(skb) = HCI_LPM_PKT;
276
277 /* LPM flow is a priority, enqueue packet at list head */
278 skb_queue_head(&intel->txq, skb);
279 hci_uart_tx_wakeup(hu);
280
281 bt_dev_dbg(hu->hdev, "Resumed by controller");
282
283 return 0;
284 }
285
286 static irqreturn_t intel_irq(int irq, void *dev_id)
287 {
288 struct intel_device *idev = dev_id;
289
290 dev_info(&idev->pdev->dev, "hci_intel irq\n");
291
292 mutex_lock(&idev->hu_lock);
293 if (idev->hu)
294 intel_lpm_host_wake(idev->hu);
295 mutex_unlock(&idev->hu_lock);
296
297 /* Host/Controller are now LPM resumed, trigger a new delayed suspend */
298 pm_runtime_get(&idev->pdev->dev);
299 pm_runtime_mark_last_busy(&idev->pdev->dev);
300 pm_runtime_put_autosuspend(&idev->pdev->dev);
301
302 return IRQ_HANDLED;
303 }
304
305 static int intel_set_power(struct hci_uart *hu, bool powered)
306 {
307 struct list_head *p;
308 int err = -ENODEV;
309
310 mutex_lock(&intel_device_list_lock);
311
312 list_for_each(p, &intel_device_list) {
313 struct intel_device *idev = list_entry(p, struct intel_device,
314 list);
315
316 /* tty device and pdev device should share the same parent
317 * which is the UART port.
318 */
319 if (hu->tty->dev->parent != idev->pdev->dev.parent)
320 continue;
321
322 if (!idev->reset) {
323 err = -ENOTSUPP;
324 break;
325 }
326
327 BT_INFO("hu %p, Switching compatible pm device (%s) to %u",
328 hu, dev_name(&idev->pdev->dev), powered);
329
330 gpiod_set_value(idev->reset, powered);
331
332 /* Provide to idev a hu reference which is used to run LPM
333 * transactions (lpm suspend/resume) from PM callbacks.
334 * hu needs to be protected against concurrent removing during
335 * these PM ops.
336 */
337 mutex_lock(&idev->hu_lock);
338 idev->hu = powered ? hu : NULL;
339 mutex_unlock(&idev->hu_lock);
340
341 if (idev->irq < 0)
342 break;
343
344 if (powered && device_can_wakeup(&idev->pdev->dev)) {
345 err = devm_request_threaded_irq(&idev->pdev->dev,
346 idev->irq, NULL,
347 intel_irq,
348 IRQF_ONESHOT,
349 "bt-host-wake", idev);
350 if (err) {
351 BT_ERR("hu %p, unable to allocate irq-%d",
352 hu, idev->irq);
353 break;
354 }
355
356 device_wakeup_enable(&idev->pdev->dev);
357
358 pm_runtime_set_active(&idev->pdev->dev);
359 pm_runtime_use_autosuspend(&idev->pdev->dev);
360 pm_runtime_set_autosuspend_delay(&idev->pdev->dev,
361 LPM_SUSPEND_DELAY_MS);
362 pm_runtime_enable(&idev->pdev->dev);
363 } else if (!powered && device_may_wakeup(&idev->pdev->dev)) {
364 devm_free_irq(&idev->pdev->dev, idev->irq, idev);
365 device_wakeup_disable(&idev->pdev->dev);
366
367 pm_runtime_disable(&idev->pdev->dev);
368 }
369 }
370
371 mutex_unlock(&intel_device_list_lock);
372
373 return err;
374 }
375
376 static void intel_busy_work(struct work_struct *work)
377 {
378 struct list_head *p;
379 struct intel_data *intel = container_of(work, struct intel_data,
380 busy_work);
381
382 /* Link is busy, delay the suspend */
383 mutex_lock(&intel_device_list_lock);
384 list_for_each(p, &intel_device_list) {
385 struct intel_device *idev = list_entry(p, struct intel_device,
386 list);
387
388 if (intel->hu->tty->dev->parent == idev->pdev->dev.parent) {
389 pm_runtime_get(&idev->pdev->dev);
390 pm_runtime_mark_last_busy(&idev->pdev->dev);
391 pm_runtime_put_autosuspend(&idev->pdev->dev);
392 break;
393 }
394 }
395 mutex_unlock(&intel_device_list_lock);
396 }
397
398 static int intel_open(struct hci_uart *hu)
399 {
400 struct intel_data *intel;
401
402 BT_DBG("hu %p", hu);
403
404 intel = kzalloc(sizeof(*intel), GFP_KERNEL);
405 if (!intel)
406 return -ENOMEM;
407
408 skb_queue_head_init(&intel->txq);
409 INIT_WORK(&intel->busy_work, intel_busy_work);
410
411 intel->hu = hu;
412
413 hu->priv = intel;
414
415 if (!intel_set_power(hu, true))
416 set_bit(STATE_BOOTING, &intel->flags);
417
418 return 0;
419 }
420
421 static int intel_close(struct hci_uart *hu)
422 {
423 struct intel_data *intel = hu->priv;
424
425 BT_DBG("hu %p", hu);
426
427 cancel_work_sync(&intel->busy_work);
428
429 intel_set_power(hu, false);
430
431 skb_queue_purge(&intel->txq);
432 kfree_skb(intel->rx_skb);
433 kfree(intel);
434
435 hu->priv = NULL;
436 return 0;
437 }
438
439 static int intel_flush(struct hci_uart *hu)
440 {
441 struct intel_data *intel = hu->priv;
442
443 BT_DBG("hu %p", hu);
444
445 skb_queue_purge(&intel->txq);
446
447 return 0;
448 }
449
450 static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
451 {
452 struct sk_buff *skb;
453 struct hci_event_hdr *hdr;
454 struct hci_ev_cmd_complete *evt;
455
456 skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC);
457 if (!skb)
458 return -ENOMEM;
459
460 hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr));
461 hdr->evt = HCI_EV_CMD_COMPLETE;
462 hdr->plen = sizeof(*evt) + 1;
463
464 evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt));
465 evt->ncmd = 0x01;
466 evt->opcode = cpu_to_le16(opcode);
467
468 *skb_put(skb, 1) = 0x00;
469
470 hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
471
472 return hci_recv_frame(hdev, skb);
473 }
474
475 static int intel_set_baudrate(struct hci_uart *hu, unsigned int speed)
476 {
477 struct intel_data *intel = hu->priv;
478 struct hci_dev *hdev = hu->hdev;
479 u8 speed_cmd[] = { 0x06, 0xfc, 0x01, 0x00 };
480 struct sk_buff *skb;
481 int err;
482
483 /* This can be the first command sent to the chip, check
484 * that the controller is ready.
485 */
486 err = intel_wait_booting(hu);
487
488 clear_bit(STATE_BOOTING, &intel->flags);
489
490 /* In case of timeout, try to continue anyway */
491 if (err && err != -ETIMEDOUT)
492 return err;
493
494 bt_dev_info(hdev, "Change controller speed to %d", speed);
495
496 speed_cmd[3] = intel_convert_speed(speed);
497 if (speed_cmd[3] == 0xff) {
498 bt_dev_err(hdev, "Unsupported speed");
499 return -EINVAL;
500 }
501
502 /* Device will not accept speed change if Intel version has not been
503 * previously requested.
504 */
505 skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT);
506 if (IS_ERR(skb)) {
507 bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
508 PTR_ERR(skb));
509 return PTR_ERR(skb);
510 }
511 kfree_skb(skb);
512
513 skb = bt_skb_alloc(sizeof(speed_cmd), GFP_KERNEL);
514 if (!skb) {
515 bt_dev_err(hdev, "Failed to alloc memory for baudrate packet");
516 return -ENOMEM;
517 }
518
519 memcpy(skb_put(skb, sizeof(speed_cmd)), speed_cmd, sizeof(speed_cmd));
520 hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
521
522 hci_uart_set_flow_control(hu, true);
523
524 skb_queue_tail(&intel->txq, skb);
525 hci_uart_tx_wakeup(hu);
526
527 /* wait 100ms to change baudrate on controller side */
528 msleep(100);
529
530 hci_uart_set_baudrate(hu, speed);
531 hci_uart_set_flow_control(hu, false);
532
533 return 0;
534 }
535
536 static int intel_setup(struct hci_uart *hu)
537 {
538 static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
539 0x00, 0x08, 0x04, 0x00 };
540 struct intel_data *intel = hu->priv;
541 struct hci_dev *hdev = hu->hdev;
542 struct sk_buff *skb;
543 struct intel_version ver;
544 struct intel_boot_params *params;
545 struct list_head *p;
546 const struct firmware *fw;
547 const u8 *fw_ptr;
548 char fwname[64];
549 u32 frag_len;
550 ktime_t calltime, delta, rettime;
551 unsigned long long duration;
552 unsigned int init_speed, oper_speed;
553 int speed_change = 0;
554 int err;
555
556 bt_dev_dbg(hdev, "start intel_setup");
557
558 hu->hdev->set_diag = btintel_set_diag;
559 hu->hdev->set_bdaddr = btintel_set_bdaddr;
560
561 calltime = ktime_get();
562
563 if (hu->init_speed)
564 init_speed = hu->init_speed;
565 else
566 init_speed = hu->proto->init_speed;
567
568 if (hu->oper_speed)
569 oper_speed = hu->oper_speed;
570 else
571 oper_speed = hu->proto->oper_speed;
572
573 if (oper_speed && init_speed && oper_speed != init_speed)
574 speed_change = 1;
575
576 /* Check that the controller is ready */
577 err = intel_wait_booting(hu);
578
579 clear_bit(STATE_BOOTING, &intel->flags);
580
581 /* In case of timeout, try to continue anyway */
582 if (err && err != -ETIMEDOUT)
583 return err;
584
585 set_bit(STATE_BOOTLOADER, &intel->flags);
586
587 /* Read the Intel version information to determine if the device
588 * is in bootloader mode or if it already has operational firmware
589 * loaded.
590 */
591 err = btintel_read_version(hdev, &ver);
592 if (err)
593 return err;
594
595 /* The hardware platform number has a fixed value of 0x37 and
596 * for now only accept this single value.
597 */
598 if (ver.hw_platform != 0x37) {
599 bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
600 ver.hw_platform);
601 return -EINVAL;
602 }
603
604 /* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is
605 * supported by this firmware loading method. This check has been
606 * put in place to ensure correct forward compatibility options
607 * when newer hardware variants come along.
608 */
609 if (ver.hw_variant != 0x0b) {
610 bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
611 ver.hw_variant);
612 return -EINVAL;
613 }
614
615 btintel_version_info(hdev, &ver);
616
617 /* The firmware variant determines if the device is in bootloader
618 * mode or is running operational firmware. The value 0x06 identifies
619 * the bootloader and the value 0x23 identifies the operational
620 * firmware.
621 *
622 * When the operational firmware is already present, then only
623 * the check for valid Bluetooth device address is needed. This
624 * determines if the device will be added as configured or
625 * unconfigured controller.
626 *
627 * It is not possible to use the Secure Boot Parameters in this
628 * case since that command is only available in bootloader mode.
629 */
630 if (ver.fw_variant == 0x23) {
631 clear_bit(STATE_BOOTLOADER, &intel->flags);
632 btintel_check_bdaddr(hdev);
633 return 0;
634 }
635
636 /* If the device is not in bootloader mode, then the only possible
637 * choice is to return an error and abort the device initialization.
638 */
639 if (ver.fw_variant != 0x06) {
640 bt_dev_err(hdev, "Unsupported Intel firmware variant (%u)",
641 ver.fw_variant);
642 return -ENODEV;
643 }
644
645 /* Read the secure boot parameters to identify the operating
646 * details of the bootloader.
647 */
648 skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_CMD_TIMEOUT);
649 if (IS_ERR(skb)) {
650 bt_dev_err(hdev, "Reading Intel boot parameters failed (%ld)",
651 PTR_ERR(skb));
652 return PTR_ERR(skb);
653 }
654
655 if (skb->len != sizeof(*params)) {
656 bt_dev_err(hdev, "Intel boot parameters size mismatch");
657 kfree_skb(skb);
658 return -EILSEQ;
659 }
660
661 params = (struct intel_boot_params *)skb->data;
662 if (params->status) {
663 bt_dev_err(hdev, "Intel boot parameters command failure (%02x)",
664 params->status);
665 err = -bt_to_errno(params->status);
666 kfree_skb(skb);
667 return err;
668 }
669
670 bt_dev_info(hdev, "Device revision is %u",
671 le16_to_cpu(params->dev_revid));
672
673 bt_dev_info(hdev, "Secure boot is %s",
674 params->secure_boot ? "enabled" : "disabled");
675
676 bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
677 params->min_fw_build_nn, params->min_fw_build_cw,
678 2000 + params->min_fw_build_yy);
679
680 /* It is required that every single firmware fragment is acknowledged
681 * with a command complete event. If the boot parameters indicate
682 * that this bootloader does not send them, then abort the setup.
683 */
684 if (params->limited_cce != 0x00) {
685 bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)",
686 params->limited_cce);
687 kfree_skb(skb);
688 return -EINVAL;
689 }
690
691 /* If the OTP has no valid Bluetooth device address, then there will
692 * also be no valid address for the operational firmware.
693 */
694 if (!bacmp(&params->otp_bdaddr, BDADDR_ANY)) {
695 bt_dev_info(hdev, "No device address configured");
696 set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
697 }
698
699 /* With this Intel bootloader only the hardware variant and device
700 * revision information are used to select the right firmware.
701 *
702 * Currently this bootloader support is limited to hardware variant
703 * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
704 */
705 snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.sfi",
706 le16_to_cpu(params->dev_revid));
707
708 err = request_firmware(&fw, fwname, &hdev->dev);
709 if (err < 0) {
710 bt_dev_err(hdev, "Failed to load Intel firmware file (%d)",
711 err);
712 kfree_skb(skb);
713 return err;
714 }
715
716 bt_dev_info(hdev, "Found device firmware: %s", fwname);
717
718 /* Save the DDC file name for later */
719 snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.ddc",
720 le16_to_cpu(params->dev_revid));
721
722 kfree_skb(skb);
723
724 if (fw->size < 644) {
725 bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
726 fw->size);
727 err = -EBADF;
728 goto done;
729 }
730
731 set_bit(STATE_DOWNLOADING, &intel->flags);
732
733 /* Start the firmware download transaction with the Init fragment
734 * represented by the 128 bytes of CSS header.
735 */
736 err = btintel_secure_send(hdev, 0x00, 128, fw->data);
737 if (err < 0) {
738 bt_dev_err(hdev, "Failed to send firmware header (%d)", err);
739 goto done;
740 }
741
742 /* Send the 256 bytes of public key information from the firmware
743 * as the PKey fragment.
744 */
745 err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128);
746 if (err < 0) {
747 bt_dev_err(hdev, "Failed to send firmware public key (%d)",
748 err);
749 goto done;
750 }
751
752 /* Send the 256 bytes of signature information from the firmware
753 * as the Sign fragment.
754 */
755 err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388);
756 if (err < 0) {
757 bt_dev_err(hdev, "Failed to send firmware signature (%d)",
758 err);
759 goto done;
760 }
761
762 fw_ptr = fw->data + 644;
763 frag_len = 0;
764
765 while (fw_ptr - fw->data < fw->size) {
766 struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
767
768 frag_len += sizeof(*cmd) + cmd->plen;
769
770 bt_dev_dbg(hdev, "Patching %td/%zu", (fw_ptr - fw->data),
771 fw->size);
772
773 /* The parameter length of the secure send command requires
774 * a 4 byte alignment. It happens so that the firmware file
775 * contains proper Intel_NOP commands to align the fragments
776 * as needed.
777 *
778 * Send set of commands with 4 byte alignment from the
779 * firmware data buffer as a single Data fragement.
780 */
781 if (frag_len % 4)
782 continue;
783
784 /* Send each command from the firmware data buffer as
785 * a single Data fragment.
786 */
787 err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr);
788 if (err < 0) {
789 bt_dev_err(hdev, "Failed to send firmware data (%d)",
790 err);
791 goto done;
792 }
793
794 fw_ptr += frag_len;
795 frag_len = 0;
796 }
797
798 set_bit(STATE_FIRMWARE_LOADED, &intel->flags);
799
800 bt_dev_info(hdev, "Waiting for firmware download to complete");
801
802 /* Before switching the device into operational mode and with that
803 * booting the loaded firmware, wait for the bootloader notification
804 * that all fragments have been successfully received.
805 *
806 * When the event processing receives the notification, then the
807 * STATE_DOWNLOADING flag will be cleared.
808 *
809 * The firmware loading should not take longer than 5 seconds
810 * and thus just timeout if that happens and fail the setup
811 * of this device.
812 */
813 err = wait_on_bit_timeout(&intel->flags, STATE_DOWNLOADING,
814 TASK_INTERRUPTIBLE,
815 msecs_to_jiffies(5000));
816 if (err == 1) {
817 bt_dev_err(hdev, "Firmware loading interrupted");
818 err = -EINTR;
819 goto done;
820 }
821
822 if (err) {
823 bt_dev_err(hdev, "Firmware loading timeout");
824 err = -ETIMEDOUT;
825 goto done;
826 }
827
828 if (test_bit(STATE_FIRMWARE_FAILED, &intel->flags)) {
829 bt_dev_err(hdev, "Firmware loading failed");
830 err = -ENOEXEC;
831 goto done;
832 }
833
834 rettime = ktime_get();
835 delta = ktime_sub(rettime, calltime);
836 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
837
838 bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
839
840 done:
841 release_firmware(fw);
842
843 if (err < 0)
844 return err;
845
846 /* We need to restore the default speed before Intel reset */
847 if (speed_change) {
848 err = intel_set_baudrate(hu, init_speed);
849 if (err)
850 return err;
851 }
852
853 calltime = ktime_get();
854
855 set_bit(STATE_BOOTING, &intel->flags);
856
857 skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param,
858 HCI_CMD_TIMEOUT);
859 if (IS_ERR(skb))
860 return PTR_ERR(skb);
861
862 kfree_skb(skb);
863
864 /* The bootloader will not indicate when the device is ready. This
865 * is done by the operational firmware sending bootup notification.
866 *
867 * Booting into operational firmware should not take longer than
868 * 1 second. However if that happens, then just fail the setup
869 * since something went wrong.
870 */
871 bt_dev_info(hdev, "Waiting for device to boot");
872
873 err = intel_wait_booting(hu);
874 if (err)
875 return err;
876
877 clear_bit(STATE_BOOTING, &intel->flags);
878
879 rettime = ktime_get();
880 delta = ktime_sub(rettime, calltime);
881 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
882
883 bt_dev_info(hdev, "Device booted in %llu usecs", duration);
884
885 /* Enable LPM if matching pdev with wakeup enabled, set TX active
886 * until further LPM TX notification.
887 */
888 mutex_lock(&intel_device_list_lock);
889 list_for_each(p, &intel_device_list) {
890 struct intel_device *dev = list_entry(p, struct intel_device,
891 list);
892 if (hu->tty->dev->parent == dev->pdev->dev.parent) {
893 if (device_may_wakeup(&dev->pdev->dev)) {
894 set_bit(STATE_LPM_ENABLED, &intel->flags);
895 set_bit(STATE_TX_ACTIVE, &intel->flags);
896 }
897 break;
898 }
899 }
900 mutex_unlock(&intel_device_list_lock);
901
902 /* Ignore errors, device can work without DDC parameters */
903 btintel_load_ddc_config(hdev, fwname);
904
905 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_CMD_TIMEOUT);
906 if (IS_ERR(skb))
907 return PTR_ERR(skb);
908 kfree_skb(skb);
909
910 if (speed_change) {
911 err = intel_set_baudrate(hu, oper_speed);
912 if (err)
913 return err;
914 }
915
916 bt_dev_info(hdev, "Setup complete");
917
918 clear_bit(STATE_BOOTLOADER, &intel->flags);
919
920 return 0;
921 }
922
923 static int intel_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
924 {
925 struct hci_uart *hu = hci_get_drvdata(hdev);
926 struct intel_data *intel = hu->priv;
927 struct hci_event_hdr *hdr;
928
929 if (!test_bit(STATE_BOOTLOADER, &intel->flags) &&
930 !test_bit(STATE_BOOTING, &intel->flags))
931 goto recv;
932
933 hdr = (void *)skb->data;
934
935 /* When the firmware loading completes the device sends
936 * out a vendor specific event indicating the result of
937 * the firmware loading.
938 */
939 if (skb->len == 7 && hdr->evt == 0xff && hdr->plen == 0x05 &&
940 skb->data[2] == 0x06) {
941 if (skb->data[3] != 0x00)
942 set_bit(STATE_FIRMWARE_FAILED, &intel->flags);
943
944 if (test_and_clear_bit(STATE_DOWNLOADING, &intel->flags) &&
945 test_bit(STATE_FIRMWARE_LOADED, &intel->flags)) {
946 smp_mb__after_atomic();
947 wake_up_bit(&intel->flags, STATE_DOWNLOADING);
948 }
949
950 /* When switching to the operational firmware the device
951 * sends a vendor specific event indicating that the bootup
952 * completed.
953 */
954 } else if (skb->len == 9 && hdr->evt == 0xff && hdr->plen == 0x07 &&
955 skb->data[2] == 0x02) {
956 if (test_and_clear_bit(STATE_BOOTING, &intel->flags)) {
957 smp_mb__after_atomic();
958 wake_up_bit(&intel->flags, STATE_BOOTING);
959 }
960 }
961 recv:
962 return hci_recv_frame(hdev, skb);
963 }
964
965 static void intel_recv_lpm_notify(struct hci_dev *hdev, int value)
966 {
967 struct hci_uart *hu = hci_get_drvdata(hdev);
968 struct intel_data *intel = hu->priv;
969
970 bt_dev_dbg(hdev, "TX idle notification (%d)", value);
971
972 if (value) {
973 set_bit(STATE_TX_ACTIVE, &intel->flags);
974 schedule_work(&intel->busy_work);
975 } else {
976 clear_bit(STATE_TX_ACTIVE, &intel->flags);
977 }
978 }
979
980 static int intel_recv_lpm(struct hci_dev *hdev, struct sk_buff *skb)
981 {
982 struct hci_lpm_pkt *lpm = (void *)skb->data;
983 struct hci_uart *hu = hci_get_drvdata(hdev);
984 struct intel_data *intel = hu->priv;
985
986 switch (lpm->opcode) {
987 case LPM_OP_TX_NOTIFY:
988 if (lpm->dlen < 1) {
989 bt_dev_err(hu->hdev, "Invalid LPM notification packet");
990 break;
991 }
992 intel_recv_lpm_notify(hdev, lpm->data[0]);
993 break;
994 case LPM_OP_SUSPEND_ACK:
995 set_bit(STATE_SUSPENDED, &intel->flags);
996 if (test_and_clear_bit(STATE_LPM_TRANSACTION, &intel->flags)) {
997 smp_mb__after_atomic();
998 wake_up_bit(&intel->flags, STATE_LPM_TRANSACTION);
999 }
1000 break;
1001 case LPM_OP_RESUME_ACK:
1002 clear_bit(STATE_SUSPENDED, &intel->flags);
1003 if (test_and_clear_bit(STATE_LPM_TRANSACTION, &intel->flags)) {
1004 smp_mb__after_atomic();
1005 wake_up_bit(&intel->flags, STATE_LPM_TRANSACTION);
1006 }
1007 break;
1008 default:
1009 bt_dev_err(hdev, "Unknown LPM opcode (%02x)", lpm->opcode);
1010 break;
1011 }
1012
1013 kfree_skb(skb);
1014
1015 return 0;
1016 }
1017
1018 #define INTEL_RECV_LPM \
1019 .type = HCI_LPM_PKT, \
1020 .hlen = HCI_LPM_HDR_SIZE, \
1021 .loff = 1, \
1022 .lsize = 1, \
1023 .maxlen = HCI_LPM_MAX_SIZE
1024
1025 static const struct h4_recv_pkt intel_recv_pkts[] = {
1026 { H4_RECV_ACL, .recv = hci_recv_frame },
1027 { H4_RECV_SCO, .recv = hci_recv_frame },
1028 { H4_RECV_EVENT, .recv = intel_recv_event },
1029 { INTEL_RECV_LPM, .recv = intel_recv_lpm },
1030 };
1031
1032 static int intel_recv(struct hci_uart *hu, const void *data, int count)
1033 {
1034 struct intel_data *intel = hu->priv;
1035
1036 if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
1037 return -EUNATCH;
1038
1039 intel->rx_skb = h4_recv_buf(hu->hdev, intel->rx_skb, data, count,
1040 intel_recv_pkts,
1041 ARRAY_SIZE(intel_recv_pkts));
1042 if (IS_ERR(intel->rx_skb)) {
1043 int err = PTR_ERR(intel->rx_skb);
1044 bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
1045 intel->rx_skb = NULL;
1046 return err;
1047 }
1048
1049 return count;
1050 }
1051
1052 static int intel_enqueue(struct hci_uart *hu, struct sk_buff *skb)
1053 {
1054 struct intel_data *intel = hu->priv;
1055 struct list_head *p;
1056
1057 BT_DBG("hu %p skb %p", hu, skb);
1058
1059 /* Be sure our controller is resumed and potential LPM transaction
1060 * completed before enqueuing any packet.
1061 */
1062 mutex_lock(&intel_device_list_lock);
1063 list_for_each(p, &intel_device_list) {
1064 struct intel_device *idev = list_entry(p, struct intel_device,
1065 list);
1066
1067 if (hu->tty->dev->parent == idev->pdev->dev.parent) {
1068 pm_runtime_get_sync(&idev->pdev->dev);
1069 pm_runtime_mark_last_busy(&idev->pdev->dev);
1070 pm_runtime_put_autosuspend(&idev->pdev->dev);
1071 break;
1072 }
1073 }
1074 mutex_unlock(&intel_device_list_lock);
1075
1076 skb_queue_tail(&intel->txq, skb);
1077
1078 return 0;
1079 }
1080
1081 static struct sk_buff *intel_dequeue(struct hci_uart *hu)
1082 {
1083 struct intel_data *intel = hu->priv;
1084 struct sk_buff *skb;
1085
1086 skb = skb_dequeue(&intel->txq);
1087 if (!skb)
1088 return skb;
1089
1090 if (test_bit(STATE_BOOTLOADER, &intel->flags) &&
1091 (hci_skb_pkt_type(skb) == HCI_COMMAND_PKT)) {
1092 struct hci_command_hdr *cmd = (void *)skb->data;
1093 __u16 opcode = le16_to_cpu(cmd->opcode);
1094
1095 /* When the 0xfc01 command is issued to boot into
1096 * the operational firmware, it will actually not
1097 * send a command complete event. To keep the flow
1098 * control working inject that event here.
1099 */
1100 if (opcode == 0xfc01)
1101 inject_cmd_complete(hu->hdev, opcode);
1102 }
1103
1104 /* Prepend skb with frame type */
1105 memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
1106
1107 return skb;
1108 }
1109
1110 static const struct hci_uart_proto intel_proto = {
1111 .id = HCI_UART_INTEL,
1112 .name = "Intel",
1113 .manufacturer = 2,
1114 .init_speed = 115200,
1115 .oper_speed = 3000000,
1116 .open = intel_open,
1117 .close = intel_close,
1118 .flush = intel_flush,
1119 .setup = intel_setup,
1120 .set_baudrate = intel_set_baudrate,
1121 .recv = intel_recv,
1122 .enqueue = intel_enqueue,
1123 .dequeue = intel_dequeue,
1124 };
1125
1126 #ifdef CONFIG_ACPI
1127 static const struct acpi_device_id intel_acpi_match[] = {
1128 { "INT33E1", 0 },
1129 { },
1130 };
1131 MODULE_DEVICE_TABLE(acpi, intel_acpi_match);
1132 #endif
1133
1134 #ifdef CONFIG_PM
1135 static int intel_suspend_device(struct device *dev)
1136 {
1137 struct intel_device *idev = dev_get_drvdata(dev);
1138
1139 mutex_lock(&idev->hu_lock);
1140 if (idev->hu)
1141 intel_lpm_suspend(idev->hu);
1142 mutex_unlock(&idev->hu_lock);
1143
1144 return 0;
1145 }
1146
1147 static int intel_resume_device(struct device *dev)
1148 {
1149 struct intel_device *idev = dev_get_drvdata(dev);
1150
1151 mutex_lock(&idev->hu_lock);
1152 if (idev->hu)
1153 intel_lpm_resume(idev->hu);
1154 mutex_unlock(&idev->hu_lock);
1155
1156 return 0;
1157 }
1158 #endif
1159
1160 #ifdef CONFIG_PM_SLEEP
1161 static int intel_suspend(struct device *dev)
1162 {
1163 struct intel_device *idev = dev_get_drvdata(dev);
1164
1165 if (device_may_wakeup(dev))
1166 enable_irq_wake(idev->irq);
1167
1168 return intel_suspend_device(dev);
1169 }
1170
1171 static int intel_resume(struct device *dev)
1172 {
1173 struct intel_device *idev = dev_get_drvdata(dev);
1174
1175 if (device_may_wakeup(dev))
1176 disable_irq_wake(idev->irq);
1177
1178 return intel_resume_device(dev);
1179 }
1180 #endif
1181
1182 static const struct dev_pm_ops intel_pm_ops = {
1183 SET_SYSTEM_SLEEP_PM_OPS(intel_suspend, intel_resume)
1184 SET_RUNTIME_PM_OPS(intel_suspend_device, intel_resume_device, NULL)
1185 };
1186
1187 static int intel_probe(struct platform_device *pdev)
1188 {
1189 struct intel_device *idev;
1190
1191 idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
1192 if (!idev)
1193 return -ENOMEM;
1194
1195 mutex_init(&idev->hu_lock);
1196
1197 idev->pdev = pdev;
1198
1199 idev->reset = devm_gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW);
1200 if (IS_ERR(idev->reset)) {
1201 dev_err(&pdev->dev, "Unable to retrieve gpio\n");
1202 return PTR_ERR(idev->reset);
1203 }
1204
1205 idev->irq = platform_get_irq(pdev, 0);
1206 if (idev->irq < 0) {
1207 struct gpio_desc *host_wake;
1208
1209 dev_err(&pdev->dev, "No IRQ, falling back to gpio-irq\n");
1210
1211 host_wake = devm_gpiod_get(&pdev->dev, "host-wake", GPIOD_IN);
1212 if (IS_ERR(host_wake)) {
1213 dev_err(&pdev->dev, "Unable to retrieve IRQ\n");
1214 goto no_irq;
1215 }
1216
1217 idev->irq = gpiod_to_irq(host_wake);
1218 if (idev->irq < 0) {
1219 dev_err(&pdev->dev, "No corresponding irq for gpio\n");
1220 goto no_irq;
1221 }
1222 }
1223
1224 /* Only enable wake-up/irq when controller is powered */
1225 device_set_wakeup_capable(&pdev->dev, true);
1226 device_wakeup_disable(&pdev->dev);
1227
1228 no_irq:
1229 platform_set_drvdata(pdev, idev);
1230
1231 /* Place this instance on the device list */
1232 mutex_lock(&intel_device_list_lock);
1233 list_add_tail(&idev->list, &intel_device_list);
1234 mutex_unlock(&intel_device_list_lock);
1235
1236 dev_info(&pdev->dev, "registered, gpio(%d)/irq(%d).\n",
1237 desc_to_gpio(idev->reset), idev->irq);
1238
1239 return 0;
1240 }
1241
1242 static int intel_remove(struct platform_device *pdev)
1243 {
1244 struct intel_device *idev = platform_get_drvdata(pdev);
1245
1246 device_wakeup_disable(&pdev->dev);
1247
1248 mutex_lock(&intel_device_list_lock);
1249 list_del(&idev->list);
1250 mutex_unlock(&intel_device_list_lock);
1251
1252 dev_info(&pdev->dev, "unregistered.\n");
1253
1254 return 0;
1255 }
1256
1257 static struct platform_driver intel_driver = {
1258 .probe = intel_probe,
1259 .remove = intel_remove,
1260 .driver = {
1261 .name = "hci_intel",
1262 .acpi_match_table = ACPI_PTR(intel_acpi_match),
1263 .pm = &intel_pm_ops,
1264 },
1265 };
1266
1267 int __init intel_init(void)
1268 {
1269 platform_driver_register(&intel_driver);
1270
1271 return hci_uart_register_proto(&intel_proto);
1272 }
1273
1274 int __exit intel_deinit(void)
1275 {
1276 platform_driver_unregister(&intel_driver);
1277
1278 return hci_uart_unregister_proto(&intel_proto);
1279 }
Linux with added FPC-III support