drivers/net/wireless/ath/ath6kl/target.h

   1 /*
   2  * Copyright (c) 2004-2010 Atheros Communications Inc.
   3  * Copyright (c) 2011 Qualcomm Atheros, Inc.
   4  *
   5  * Permission to use, copy, modify, and/or distribute this software for any
   6  * purpose with or without fee is hereby granted, provided that the above
   7  * copyright notice and this permission notice appear in all copies.
   8  *
   9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  16  */
  17
  18 #ifndef TARGET_H
  19 #define TARGET_H
  20
  21 #define AR6003_BOARD_DATA_SZ            1024
  22 #define AR6003_BOARD_EXT_DATA_SZ        768
  23 #define AR6003_BOARD_EXT_DATA_SZ_V2     1024
  24
  25 #define AR6004_BOARD_DATA_SZ     6144
  26 #define AR6004_BOARD_EXT_DATA_SZ 0
  27
  28 #define RESET_CONTROL_ADDRESS           0x00004000
  29 #define RESET_CONTROL_COLD_RST          0x00000100
  30 #define RESET_CONTROL_MBOX_RST          0x00000004
  31
  32 #define CPU_CLOCK_STANDARD_S            0
  33 #define CPU_CLOCK_STANDARD              0x00000003
  34 #define CPU_CLOCK_ADDRESS               0x00000020
  35
  36 #define CLOCK_CONTROL_ADDRESS           0x00000028
  37 #define CLOCK_CONTROL_LF_CLK32_S        2
  38 #define CLOCK_CONTROL_LF_CLK32          0x00000004
  39
  40 #define SYSTEM_SLEEP_ADDRESS            0x000000c4
  41 #define SYSTEM_SLEEP_DISABLE_S          0
  42 #define SYSTEM_SLEEP_DISABLE            0x00000001
  43
  44 #define LPO_CAL_ADDRESS                 0x000000e0
  45 #define LPO_CAL_ENABLE_S                20
  46 #define LPO_CAL_ENABLE                  0x00100000
  47
  48 #define GPIO_PIN9_ADDRESS               0x0000004c
  49 #define GPIO_PIN10_ADDRESS              0x00000050
  50 #define GPIO_PIN11_ADDRESS              0x00000054
  51 #define GPIO_PIN12_ADDRESS              0x00000058
  52 #define GPIO_PIN13_ADDRESS              0x0000005c
  53
  54 #define HOST_INT_STATUS_ADDRESS         0x00000400
  55 #define HOST_INT_STATUS_ERROR_S         7
  56 #define HOST_INT_STATUS_ERROR           0x00000080
  57
  58 #define HOST_INT_STATUS_CPU_S           6
  59 #define HOST_INT_STATUS_CPU             0x00000040
  60
  61 #define HOST_INT_STATUS_COUNTER_S       4
  62 #define HOST_INT_STATUS_COUNTER         0x00000010
  63
  64 #define CPU_INT_STATUS_ADDRESS          0x00000401
  65
  66 #define ERROR_INT_STATUS_ADDRESS        0x00000402
  67 #define ERROR_INT_STATUS_WAKEUP_S       2
  68 #define ERROR_INT_STATUS_WAKEUP         0x00000004
  69
  70 #define ERROR_INT_STATUS_RX_UNDERFLOW_S 1
  71 #define ERROR_INT_STATUS_RX_UNDERFLOW   0x00000002
  72
  73 #define ERROR_INT_STATUS_TX_OVERFLOW_S  0
  74 #define ERROR_INT_STATUS_TX_OVERFLOW    0x00000001
  75
  76 #define COUNTER_INT_STATUS_ADDRESS      0x00000403
  77 #define COUNTER_INT_STATUS_COUNTER_S    0
  78 #define COUNTER_INT_STATUS_COUNTER      0x000000ff
  79
  80 #define RX_LOOKAHEAD_VALID_ADDRESS      0x00000405
  81
  82 #define INT_STATUS_ENABLE_ADDRESS       0x00000418
  83 #define INT_STATUS_ENABLE_ERROR_S       7
  84 #define INT_STATUS_ENABLE_ERROR         0x00000080
  85
  86 #define INT_STATUS_ENABLE_CPU_S         6
  87 #define INT_STATUS_ENABLE_CPU           0x00000040
  88
  89 #define INT_STATUS_ENABLE_INT_S         5
  90 #define INT_STATUS_ENABLE_INT           0x00000020
  91 #define INT_STATUS_ENABLE_COUNTER_S     4
  92 #define INT_STATUS_ENABLE_COUNTER       0x00000010
  93
  94 #define INT_STATUS_ENABLE_MBOX_DATA_S   0
  95 #define INT_STATUS_ENABLE_MBOX_DATA     0x0000000f
  96
  97 #define CPU_INT_STATUS_ENABLE_ADDRESS   0x00000419
  98 #define CPU_INT_STATUS_ENABLE_BIT_S     0
  99 #define CPU_INT_STATUS_ENABLE_BIT       0x000000ff
 100
 101 #define ERROR_STATUS_ENABLE_ADDRESS             0x0000041a
 102 #define ERROR_STATUS_ENABLE_RX_UNDERFLOW_S      1
 103 #define ERROR_STATUS_ENABLE_RX_UNDERFLOW        0x00000002
 104
 105 #define ERROR_STATUS_ENABLE_TX_OVERFLOW_S       0
 106 #define ERROR_STATUS_ENABLE_TX_OVERFLOW         0x00000001
 107
 108 #define COUNTER_INT_STATUS_ENABLE_ADDRESS       0x0000041b
 109 #define COUNTER_INT_STATUS_ENABLE_BIT_S         0
 110 #define COUNTER_INT_STATUS_ENABLE_BIT           0x000000ff
 111
 112 #define COUNT_ADDRESS                   0x00000420
 113
 114 #define COUNT_DEC_ADDRESS               0x00000440
 115
 116 #define WINDOW_DATA_ADDRESS             0x00000474
 117 #define WINDOW_WRITE_ADDR_ADDRESS       0x00000478
 118 #define WINDOW_READ_ADDR_ADDRESS        0x0000047c
 119 #define CPU_DBG_SEL_ADDRESS             0x00000483
 120 #define CPU_DBG_ADDRESS                 0x00000484
 121
 122 #define LOCAL_SCRATCH_ADDRESS           0x000000c0
 123 #define ATH6KL_OPTION_SLEEP_DISABLE     0x08
 124
 125 #define RTC_BASE_ADDRESS                0x00004000
 126 #define GPIO_BASE_ADDRESS               0x00014000
 127 #define MBOX_BASE_ADDRESS               0x00018000
 128 #define ANALOG_INTF_BASE_ADDRESS        0x0001c000
 129
 130 /* real name of the register is unknown */
 131 #define ATH6KL_ANALOG_PLL_REGISTER      (ANALOG_INTF_BASE_ADDRESS + 0x284)
 132
 133 #define SM(f, v)        (((v) << f##_S) & f)
 134 #define MS(f, v)        (((v) & f) >> f##_S)
 135
 136 /*
 137  * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the
 138  * host_interest structure.
 139  *
 140  * Host Interest is shared between Host and Target in order to coordinate
 141  * between the two, and is intended to remain constant (with additions only
 142  * at the end).
 143  */
 144 #define ATH6KL_AR6003_HI_START_ADDR           0x00540600
 145 #define ATH6KL_AR6004_HI_START_ADDR           0x00400800
 146
 147 /*
 148  * These are items that the Host may need to access
 149  * via BMI or via the Diagnostic Window. The position
 150  * of items in this structure must remain constant.
 151  * across firmware revisions!
 152  *
 153  * Types for each item must be fixed size across target and host platforms.
 154  * The structure is used only to calculate offset for each register with
 155  * HI_ITEM() macro, no values are stored to it.
 156  *
 157  * More items may be added at the end.
 158  */
 159 struct host_interest {
 160         /*
 161          * Pointer to application-defined area, if any.
 162          * Set by Target application during startup.
 163          */
 164         u32 hi_app_host_interest;                      /* 0x00 */
 165
 166         /* Pointer to register dump area, valid after Target crash. */
 167         u32 hi_failure_state;                          /* 0x04 */
 168
 169         /* Pointer to debug logging header */
 170         u32 hi_dbglog_hdr;                             /* 0x08 */
 171
 172         u32 hi_unused1;                       /* 0x0c */
 173
 174         /*
 175          * General-purpose flag bits, similar to ATH6KL_OPTION_* flags.
 176          * Can be used by application rather than by OS.
 177          */
 178         u32 hi_option_flag;                            /* 0x10 */
 179
 180         /*
 181          * Boolean that determines whether or not to
 182          * display messages on the serial port.
 183          */
 184         u32 hi_serial_enable;                          /* 0x14 */
 185
 186         /* Start address of DataSet index, if any */
 187         u32 hi_dset_list_head;                         /* 0x18 */
 188
 189         /* Override Target application start address */
 190         u32 hi_app_start;                              /* 0x1c */
 191
 192         /* Clock and voltage tuning */
 193         u32 hi_skip_clock_init;                        /* 0x20 */
 194         u32 hi_core_clock_setting;                     /* 0x24 */
 195         u32 hi_cpu_clock_setting;                      /* 0x28 */
 196         u32 hi_system_sleep_setting;                   /* 0x2c */
 197         u32 hi_xtal_control_setting;                   /* 0x30 */
 198         u32 hi_pll_ctrl_setting_24ghz;                 /* 0x34 */
 199         u32 hi_pll_ctrl_setting_5ghz;                  /* 0x38 */
 200         u32 hi_ref_voltage_trim_setting;               /* 0x3c */
 201         u32 hi_clock_info;                             /* 0x40 */
 202
 203         /*
 204          * Flash configuration overrides, used only
 205          * when firmware is not executing from flash.
 206          * (When using flash, modify the global variables
 207          * with equivalent names.)
 208          */
 209         u32 hi_bank0_addr_value;                       /* 0x44 */
 210         u32 hi_bank0_read_value;                       /* 0x48 */
 211         u32 hi_bank0_write_value;                      /* 0x4c */
 212         u32 hi_bank0_config_value;                     /* 0x50 */
 213
 214         /* Pointer to Board Data  */
 215         u32 hi_board_data;                             /* 0x54 */
 216         u32 hi_board_data_initialized;                 /* 0x58 */
 217
 218         u32 hi_dset_ram_index_tbl;                     /* 0x5c */
 219
 220         u32 hi_desired_baud_rate;                      /* 0x60 */
 221         u32 hi_dbglog_config;                          /* 0x64 */
 222         u32 hi_end_ram_reserve_sz;                     /* 0x68 */
 223         u32 hi_mbox_io_block_sz;                       /* 0x6c */
 224
 225         u32 hi_num_bpatch_streams;                     /* 0x70 -- unused */
 226         u32 hi_mbox_isr_yield_limit;                   /* 0x74 */
 227
 228         u32 hi_refclk_hz;                              /* 0x78 */
 229         u32 hi_ext_clk_detected;                       /* 0x7c */
 230         u32 hi_dbg_uart_txpin;                         /* 0x80 */
 231         u32 hi_dbg_uart_rxpin;                         /* 0x84 */
 232         u32 hi_hci_uart_baud;                          /* 0x88 */
 233         u32 hi_hci_uart_pin_assignments;               /* 0x8C */
 234         /*
 235          * NOTE: byte [0] = tx pin, [1] = rx pin, [2] = rts pin, [3] = cts
 236          * pin
 237          */
 238         u32 hi_hci_uart_baud_scale_val;                /* 0x90 */
 239         u32 hi_hci_uart_baud_step_val;                 /* 0x94 */
 240
 241         u32 hi_allocram_start;                         /* 0x98 */
 242         u32 hi_allocram_sz;                            /* 0x9c */
 243         u32 hi_hci_bridge_flags;                       /* 0xa0 */
 244         u32 hi_hci_uart_support_pins;                  /* 0xa4 */
 245         /*
 246          * NOTE: byte [0] = RESET pin (bit 7 is polarity),
 247          * bytes[1]..bytes[3] are for future use
 248          */
 249         u32 hi_hci_uart_pwr_mgmt_params;               /* 0xa8 */
 250         /*
 251          * 0xa8   - [1]: 0 = UART FC active low, 1 = UART FC active high
 252          *      [31:16]: wakeup timeout in ms
 253          */
 254
 255         /* Pointer to extended board data */
 256         u32 hi_board_ext_data;                /* 0xac */
 257         u32 hi_board_ext_data_config;         /* 0xb0 */
 258
 259         /*
 260          * Bit [0]  :   valid
 261          * Bit[31:16:   size
 262          */
 263         /*
 264          * hi_reset_flag is used to do some stuff when target reset.
 265          * such as restore app_start after warm reset or
 266          * preserve host Interest area, or preserve ROM data, literals etc.
 267          */
 268         u32 hi_reset_flag;                            /* 0xb4 */
 269         /* indicate hi_reset_flag is valid */
 270         u32 hi_reset_flag_valid;                      /* 0xb8 */
 271         u32 hi_hci_uart_pwr_mgmt_params_ext;           /* 0xbc */
 272         /*
 273          * 0xbc - [31:0]: idle timeout in ms
 274          */
 275         /* ACS flags */
 276         u32 hi_acs_flags;                              /* 0xc0 */
 277         u32 hi_console_flags;                          /* 0xc4 */
 278         u32 hi_nvram_state;                            /* 0xc8 */
 279         u32 hi_option_flag2;                           /* 0xcc */
 280
 281         /* If non-zero, override values sent to Host in WMI_READY event. */
 282         u32 hi_sw_version_override;                    /* 0xd0 */
 283         u32 hi_abi_version_override;                   /* 0xd4 */
 284
 285         /*
 286          * Percentage of high priority RX traffic to total expected RX traffic -
 287          * applicable only to ar6004
 288          */
 289         u32 hi_hp_rx_traffic_ratio;                    /* 0xd8 */
 290
 291         /* test applications flags */
 292         u32 hi_test_apps_related    ;                  /* 0xdc */
 293         /* location of test script */
 294         u32 hi_ota_testscript;                         /* 0xe0 */
 295         /* location of CAL data */
 296         u32 hi_cal_data;                               /* 0xe4 */
 297         /* Number of packet log buffers */
 298         u32 hi_pktlog_num_buffers;                     /* 0xe8 */
 299
 300 } __packed;
 301
 302 #define HI_ITEM(item)  offsetof(struct host_interest, item)
 303
 304 #define HI_OPTION_MAC_ADDR_METHOD_SHIFT 3
 305
 306 #define HI_OPTION_FW_MODE_IBSS    0x0
 307 #define HI_OPTION_FW_MODE_BSS_STA 0x1
 308 #define HI_OPTION_FW_MODE_AP      0x2
 309
 310 #define HI_OPTION_FW_SUBMODE_NONE      0x0
 311 #define HI_OPTION_FW_SUBMODE_P2PDEV    0x1
 312 #define HI_OPTION_FW_SUBMODE_P2PCLIENT 0x2
 313 #define HI_OPTION_FW_SUBMODE_P2PGO     0x3
 314
 315 #define HI_OPTION_NUM_DEV_SHIFT   0x9
 316
 317 #define HI_OPTION_FW_BRIDGE_SHIFT 0x04
 318
 319 /* Fw Mode/SubMode Mask
 320 |------------------------------------------------------------------------------|
 321 |   SUB   |   SUB   |   SUB   |  SUB    |         |         |         |
 322 | MODE[3] | MODE[2] | MODE[1] | MODE[0] | MODE[3] | MODE[2] | MODE[1] | MODE[0|
 323 |   (2)   |   (2)   |   (2)   |   (2)   |   (2)   |   (2)   |   (2)   |   (2)
 324 |------------------------------------------------------------------------------|
 325 */
 326 #define HI_OPTION_FW_MODE_BITS         0x2
 327 #define HI_OPTION_FW_MODE_SHIFT        0xC
 328
 329 #define HI_OPTION_FW_SUBMODE_BITS      0x2
 330 #define HI_OPTION_FW_SUBMODE_SHIFT     0x14
 331
 332 /* Convert a Target virtual address into a Target physical address */
 333 #define AR6003_VTOP(vaddr) ((vaddr) & 0x001fffff)
 334 #define AR6004_VTOP(vaddr) (vaddr)
 335
 336 #define TARG_VTOP(target_type, vaddr) \
 337         (((target_type) == TARGET_TYPE_AR6003) ? AR6003_VTOP(vaddr) : \
 338         (((target_type) == TARGET_TYPE_AR6004) ? AR6004_VTOP(vaddr) : 0))
 339
 340 #define ATH6KL_FWLOG_PAYLOAD_SIZE               1500
 341
 342 struct ath6kl_dbglog_buf {
 343         __le32 next;
 344         __le32 buffer_addr;
 345         __le32 bufsize;
 346         __le32 length;
 347         __le32 count;
 348         __le32 free;
 349 } __packed;
 350
 351 struct ath6kl_dbglog_hdr {
 352         __le32 dbuf_addr;
 353         __le32 dropped;
 354 } __packed;
 355
 356 #endif